1 /* doc/example.conf - brief example configuration file
3 * Copyright (C) 2000-2002 Hybrid Development Team
4 * Copyright (C) 2002-2005 ircd-ratbox development team
5 * Copyright (C) 2005-2006 charybdis development team
7 * $Id: example.conf 3582 2007-11-17 21:55:48Z jilles $
9 * See reference.conf for more information.
13 #loadmodule "extensions/chm_operonly_compat.so";
14 #loadmodule "extensions/chm_quietunreg_compat.so";
15 #loadmodule "extensions/chm_sslonly_compat.so";
16 #loadmodule "extensions/createauthonly.so";
17 #loadmodule "extensions/extb_account.so";
18 #loadmodule "extensions/extb_canjoin.so";
19 #loadmodule "extensions/extb_channel.so";
20 #loadmodule "extensions/extb_extgecos.so";
21 #loadmodule "extensions/extb_oper.so";
22 #loadmodule "extensions/extb_realname.so";
23 #loadmodule "extensions/extb_server.so";
24 #loadmodule "extensions/extb_ssl.so";
25 #loadmodule "extensions/hurt.so";
26 #loadmodule "extensions/m_findforwards.so";
27 #loadmodule "extensions/m_identify.so";
28 #loadmodule "extensions/no_oper_invis.so";
29 #loadmodule "extensions/sno_farconnect.so";
30 #loadmodule "extensions/sno_globalkline.so";
31 #loadmodule "extensions/sno_globaloper.so";
32 #loadmodule "extensions/sno_whois.so";
33 #loadmodule "extensions/override.so";
34 #loadmodule "extensions/m_nokillservices.so";
37 * IP cloaking extensions: use ip_cloaking_4.0
38 * if you're linking 3.2 and later, otherwise use
39 * ip_cloaking.so, for compatibility with older 3.x
43 #loadmodule "extensions/ip_cloaking_4.0.so";
44 #loadmodule "extensions/ip_cloaking.so";
49 description = "charybdis test server";
50 network_name = "StaticBox";
51 network_desc = "Your IRC network.";
54 /* On multi-homed hosts you may need the following. These define
55 * the addresses we connect from to other servers. */
57 #vhost = "192.169.0.1";
59 #vhost6 = "3ffe:80e8:546::2";
61 /* ssl_private_key: our ssl private key */
62 ssl_private_key = "etc/ssl.key";
64 /* ssl_cert: certificate for our ssl server */
65 ssl_cert = "etc/ssl.cert";
67 /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
68 ssl_dh_params = "etc/dh.pem";
70 /* ssld_count: number of ssld processes you want to start, if you
71 * have a really busy server, using N-1 where N is the number of
72 * cpu/cpu cores you have might be useful. A number greater than one
73 * can also be useful in case of bugs in ssld and because ssld needs
74 * two file descriptors per SSL connection.
78 /* default max clients: the default maximum number of clients
79 * allowed to connect. This can be changed once ircd has started by
81 * /quote set maxclients <limit>
83 default_max_clients = 1024;
85 /* nicklen: enforced nickname length (for this server only; must not
86 * be longer than the maximum length set while building).
92 name = "Lazy admin (lazya)";
93 description = "StaticBox client server";
94 email = "nobody@127.0.0.1";
98 fname_userlog = "logs/userlog";
99 #fname_fuserlog = "logs/fuserlog";
100 fname_operlog = "logs/operlog";
101 #fname_foperlog = "logs/foperlog";
102 fname_serverlog = "logs/serverlog";
103 #fname_klinelog = "logs/klinelog";
104 fname_killlog = "logs/killlog";
105 fname_operspylog = "logs/operspylog";
106 #fname_ioerrorlog = "logs/ioerror";
109 /* class {} blocks MUST be specified before anything that uses them. That
110 * means they must be defined before auth {} and before connect {}.
113 ping_time = 2 minutes;
114 number_per_ident = 10;
116 number_per_ip_global = 50;
117 cidr_ipv4_bitlen = 24;
118 cidr_ipv6_bitlen = 64;
119 number_per_cidr = 200;
125 ping_time = 5 minutes;
132 ping_time = 5 minutes;
133 connectfreq = 5 minutes;
139 /* defer_accept: wait for clients to send IRC handshake data before
140 * accepting them. if you intend to use software which depends on the
141 * server replying first, such as BOPM, you should disable this feature.
142 * otherwise, you probably want to leave it on.
146 /* If you want to listen on a specific IP only, specify host.
147 * host definitions apply only to the following port line.
149 #host = "192.169.0.1";
150 port = 5000, 6665 .. 6669;
153 /* Listen on IPv6 (if you used host= above). */
154 #host = "3ffe:1234:a:b:c::d";
155 #port = 5000, 6665 .. 6669;
159 /* auth {}: allow users to connect to the ircd (OLD I:)
160 * auth {} blocks MUST be specified in order of precedence. The first one
161 * that matches a user will be used. So place spoofs first, then specials,
162 * then general access, then restricted.
165 /* user: the user@host allowed to connect. Multiple IPv4/IPv6 user
166 * lines are permitted per auth block. This is matched against the
167 * hostname and IP address (using :: shortening for IPv6 and
168 * prepending a 0 if it starts with a colon) and can also use CIDR
171 user = "*@172.16.0.0/12";
172 user = "*test@123D:B567:*";
174 /* password: an optional password that is required to use this block.
175 * By default this is not encrypted, specify the flag "encrypted" in
176 * flags = ...; below if it is.
178 password = "letmein";
180 /* spoof: fake the users user@host to be be this. You may either
181 * specify a host or a user@host to spoof to. This is free-form,
182 * just do everyone a favour and dont abuse it. (OLD I: = flag)
184 spoof = "I.still.hate.packets";
186 /* Possible flags in auth:
188 * encrypted | password is encrypted with mkpasswd
189 * spoof_notice | give a notice when spoofing hosts
190 * exceed_limit (old > flag) | allow user to exceed class user limits
191 * kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
192 * dnsbl_exempt | exempt this user from dnsbls
193 * spambot_exempt | exempt this user from spambot checks
194 * shide_exempt | exempt this user from serverhiding
195 * jupe_exempt | exempt this user from generating
196 * warnings joining juped channels
197 * resv_exempt | exempt this user from resvs
198 * flood_exempt | exempt this user from flood limits
200 * no_tilde (old - flag) | don't prefix ~ to username if no ident
201 * need_ident (old + flag) | require ident for user in this class
202 * need_ssl | require SSL/TLS for user in this class
203 * need_sasl | require SASL id for user in this class
205 flags = kline_exempt, exceed_limit;
207 /* class: the class the user is placed in */
216 /* privset {} blocks MUST be specified before anything that uses them. That
217 * means they must be defined before operator {}.
220 privs = oper:local_kill, oper:operwall;
223 privset "server_bot" {
224 extends = "local_op";
225 privs = oper:kline, oper:remoteban, snomask:nick_changes;
228 privset "global_op" {
229 extends = "local_op";
230 privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
231 oper:resv, oper:mass_notice, oper:remoteban;
235 extends = "global_op";
236 privs = oper:admin, oper:die, oper:rehash, oper:spy;
240 /* name: the name of the oper must go above */
242 /* user: the user@host required for this operator. CIDR *is*
243 * supported now. auth{} spoofs work here, other spoofs do not.
244 * multiple user="" lines are supported.
246 user = "*god@127.0.0.1";
248 /* password: the password required to oper. Unless ~encrypted is
249 * contained in flags = ...; this will need to be encrypted using
250 * mkpasswd, MD5 is supported
252 password = "etcnjl8juSU1E";
254 /* rsa key: the public key for this oper when using Challenge.
255 * A password should not be defined when this is used, see
256 * doc/challenge.txt for more information.
258 #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
260 /* umodes: the specific umodes this oper gets when they oper.
261 * If this is specified an oper will not be given oper_umodes
262 * These are described above oper_only_umodes in general {};
264 #umodes = locops, servnotice, operwall, wallop;
266 /* fingerprint: if specified, the oper's client certificate
267 * fingerprint will be checked against the specified fingerprint
270 #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
272 /* snomask: specific server notice mask on oper up.
273 * If this is specified an oper will not be given oper_snomask.
275 snomask = "+Zbfkrsuy";
277 /* flags: misc options for the operator. You may prefix an option
278 * with ~ to disable it, e.g. ~encrypted.
280 * Default flags are encrypted.
284 * encrypted: the password above is encrypted [DEFAULT]
285 * need_ssl: must be using SSL/TLS to oper up
289 /* privset: privileges set to grant */
293 connect "irc.uplink.com" {
294 host = "192.168.0.1";
295 send_password = "password";
296 accept_password = "anotherpassword";
300 flags = compressed, topicburst;
302 #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
304 /* If the connection is IPv6, uncomment below.
305 * Use 0::1, not ::1, for IPv6 localhost. */
309 connect "ssl.uplink.com" {
310 host = "192.168.0.1";
311 send_password = "password";
312 accept_password = "anotherpassword";
316 flags = ssl, topicburst;
320 name = "services.int";
325 flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv;
333 /* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
343 knock_delay = 5 minutes;
344 knock_delay_channel = 1 minute;
345 max_chans_per_user = 15;
347 max_bans_large = 500;
348 default_split_user_count = 0;
349 default_split_server_count = 0;
350 no_create_on_split = no;
351 no_join_on_split = no;
352 burst_topicwho = yes;
353 kick_on_split_riding = no;
354 only_ascii_channels = no;
355 resv_forcepart = yes;
356 channel_target_change = yes;
357 disable_local_channels = no;
362 links_delay = 5 minutes;
367 /* These are the blacklist settings.
368 * You can have multiple combinations of host and rejection reasons.
369 * They are used in pairs of one host/rejection reason.
371 * These settings should be adequate for most networks, and are (presently)
372 * required for use on StaticBox.
374 * Word to the wise: Do not use blacklists like SPEWS for blocking IRC
377 * As of charybdis 2.2, you can do some keyword substitution on the rejection
378 * reason. The available keyword substitutions are:
380 * ${ip} - the user's IP
381 * ${host} - the user's canonical hostname
382 * ${dnsbl-host} - the dnsbl hostname the lookup was done against
383 * ${nick} - the user's nickname
384 * ${network-name} - the name of the network
386 * As of charybdis 3.4, a type parameter is supported, which specifies the
387 * address families the blacklist supports. IPv4 and IPv6 are supported.
388 * IPv4 is currently the default as few blacklists support IPv6 operation
389 * as of this writing.
391 * As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
392 * is considered a match. If included, a comma-separated list of *quoted*
393 * strings is allowed to match queries. They may be of the format "0" to "255"
394 * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
395 * an A record. The blacklist is only applied if it matches anything in the
396 * list. You may freely mix full IP's and final octets.
398 * Consult your blacklist provider for the meaning of these parameters; they
399 * are usually used to denote different ban types.
401 * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
402 * contacted, via email, at admins@2mbit.com before using these BLs.
403 * See <http://www.ahbl.org/services.php> for more information.
406 host = "rbl.efnetrbl.org";
408 reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
410 # host = "ircbl.ahbl.org";
412 # reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
414 # host = "tor.ahbl.org";
416 # reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
418 /* Example of a blacklist that supports both IPv4 and IPv6 and using matches */
419 # host = "foobl.blacklist.invalid";
421 # matches = "4", "6", "127.0.0.10";
422 # reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
458 hide_error_messages = opers;
459 hide_spoof_ips = yes;
462 * default_umodes: umodes to enable on connect.
463 * If you have enabled the new ip_cloaking_4.0 module, and you want
464 * to make use of it, add +x to this option, i.e.:
465 * default_umodes = "+ix";
467 * If you have enabled the old ip_cloaking module, and you want
468 * to make use of it, add +h to this option, i.e.:
469 * default_umodes = "+ih";
471 default_umodes = "+i";
473 default_operstring = "is an IRC Operator";
474 default_adminstring = "is a Server Administrator";
475 servicestring = "is a Network Service";
476 disable_fake_channels = no;
477 tkline_expire_notices = no;
478 default_floodcount = 10;
479 failed_oper_notice = yes;
482 min_nonwildcard_simple = 3;
485 anti_nick_flood = yes;
486 max_nick_time = 20 seconds;
487 max_nick_changes = 5;
488 anti_spam_exit_message_time = 5 minutes;
489 ts_warn_delta = 30 seconds;
490 ts_max_delta = 5 minutes;
494 global_snotices = yes;
495 dline_with_reason = yes;
496 kline_delay = 0 seconds;
497 kline_with_reason = yes;
498 kline_reason = "K-Lined";
499 identify_service = "NickServ@services.int";
500 identify_command = "IDENTIFY";
501 non_redundant_klines = yes;
503 use_propagated_bans = yes;
504 stats_e_disabled = no;
505 stats_c_oper_only=no;
506 stats_h_oper_only=no;
507 stats_y_oper_only=no;
508 stats_o_oper_only=yes;
509 stats_P_oper_only=no;
510 stats_i_oper_only=masked;
511 stats_k_oper_only=masked;
513 operspy_admin_only = no;
514 operspy_dont_care_user_info = no;
515 caller_id_wait = 1 minute;
516 pace_wait_simple = 1 second;
517 pace_wait = 10 seconds;
520 connect_timeout = 30 seconds;
521 default_ident_timeout = 5;
525 client_flood_max_lines = 20;
526 use_whois_actually = no;
527 oper_only_umodes = operwall, locops, servnotice;
528 oper_umodes = locops, servnotice, operwall, wallop;
531 nick_delay = 0 seconds; # 15 minutes if you want to enable this
532 reject_ban_time = 1 minute;
533 reject_after_count = 3;
534 reject_duration = 5 minutes;
535 throttle_duration = 60;
537 max_ratelimit_tokens = 30;
543 path = "modules/autoload";