1 /* doc/example.conf - brief example configuration file
3 * Copyright (C) 2000-2002 Hybrid Development Team
4 * Copyright (C) 2002-2005 ircd-ratbox development team
5 * Copyright (C) 2005-2006 charybdis development team
7 * $Id: example.conf 3582 2007-11-17 21:55:48Z jilles $
9 * See reference.conf for more information.
13 #loadmodule "extensions/chm_operonly_compat.so";
14 #loadmodule "extensions/chm_quietunreg_compat.so";
15 #loadmodule "extensions/chm_sslonly_compat.so";
16 #loadmodule "extensions/createauthonly.so";
17 #loadmodule "extensions/extb_account.so";
18 #loadmodule "extensions/extb_canjoin.so";
19 #loadmodule "extensions/extb_channel.so";
20 #loadmodule "extensions/extb_extgecos.so";
21 #loadmodule "extensions/extb_oper.so";
22 #loadmodule "extensions/extb_realname.so";
23 #loadmodule "extensions/extb_server.so";
24 #loadmodule "extensions/extb_ssl.so";
25 #loadmodule "extensions/hurt.so";
26 #loadmodule "extensions/m_findforwards.so";
27 #loadmodule "extensions/m_identify.so";
28 #loadmodule "extensions/no_oper_invis.so";
29 #loadmodule "extensions/sno_farconnect.so";
30 #loadmodule "extensions/sno_globalkline.so";
31 #loadmodule "extensions/sno_globaloper.so";
32 #loadmodule "extensions/sno_whois.so";
35 * IP cloaking extensions: use ip_cloaking_4.0
36 * if you're linking 3.2 and later, otherwise use
37 * ip_cloaking.so, for compatibility with older 3.x
41 #loadmodule "extensions/ip_cloaking_4.0.so";
42 #loadmodule "extensions/ip_cloaking.so";
47 description = "charybdis test server";
48 network_name = "AthemeNET";
49 network_desc = "Your IRC network.";
52 /* On multi-homed hosts you may need the following. These define
53 * the addresses we connect from to other servers. */
55 #vhost = "192.169.0.1";
57 #vhost6 = "3ffe:80e8:546::2";
59 /* ssl_private_key: our ssl private key */
60 ssl_private_key = "etc/test.key";
62 /* ssl_cert: certificate for our ssl server */
63 ssl_cert = "etc/test.cert";
65 /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
66 ssl_dh_params = "etc/dh.pem";
68 /* ssld_count: number of ssld processes you want to start, if you
69 * have a really busy server, using N-1 where N is the number of
70 * cpu/cpu cores you have might be useful. A number greater than one
71 * can also be useful in case of bugs in ssld and because ssld needs
72 * two file descriptors per SSL connection.
76 /* default max clients: the default maximum number of clients
77 * allowed to connect. This can be changed once ircd has started by
79 * /quote set maxclients <limit>
81 default_max_clients = 1024;
85 name = "Lazy admin (lazya)";
86 description = "AthemeNET client server";
87 email = "nobody@127.0.0.1";
91 fname_userlog = "logs/userlog";
92 #fname_fuserlog = "logs/fuserlog";
93 fname_operlog = "logs/operlog";
94 #fname_foperlog = "logs/foperlog";
95 fname_serverlog = "logs/serverlog";
96 #fname_klinelog = "logs/klinelog";
97 fname_killlog = "logs/killlog";
98 fname_operspylog = "logs/operspylog";
99 #fname_ioerrorlog = "logs/ioerror";
102 /* class {} blocks MUST be specified before anything that uses them. That
103 * means they must be defined before auth {} and before connect {}.
106 ping_time = 2 minutes;
107 number_per_ident = 10;
109 number_per_ip_global = 50;
110 cidr_ipv4_bitlen = 24;
111 cidr_ipv6_bitlen = 64;
112 number_per_cidr = 200;
118 ping_time = 5 minutes;
125 ping_time = 5 minutes;
126 connectfreq = 5 minutes;
132 /* If you want to listen on a specific IP only, specify host.
133 * host definitions apply only to the following port line.
135 #host = "192.169.0.1";
136 port = 5000, 6665 .. 6669;
139 /* Listen on IPv6 (if you used host= above). */
140 #host = "3ffe:1234:a:b:c::d";
141 #port = 5000, 6665 .. 6669;
145 /* auth {}: allow users to connect to the ircd (OLD I:)
146 * auth {} blocks MUST be specified in order of precedence. The first one
147 * that matches a user will be used. So place spoofs first, then specials,
148 * then general access, then restricted.
151 /* user: the user@host allowed to connect. Multiple IPv4/IPv6 user
152 * lines are permitted per auth block. This is matched against the
153 * hostname and IP address (using :: shortening for IPv6 and
154 * prepending a 0 if it starts with a colon) and can also use CIDR
157 user = "*@172.16.0.0/12";
158 user = "*test@123D:B567:*";
160 /* password: an optional password that is required to use this block.
161 * By default this is not encrypted, specify the flag "encrypted" in
162 * flags = ...; below if it is.
164 password = "letmein";
166 /* spoof: fake the users user@host to be be this. You may either
167 * specify a host or a user@host to spoof to. This is free-form,
168 * just do everyone a favour and dont abuse it. (OLD I: = flag)
170 spoof = "I.still.hate.packets";
172 /* Possible flags in auth:
174 * encrypted | password is encrypted with mkpasswd
175 * spoof_notice | give a notice when spoofing hosts
176 * exceed_limit (old > flag) | allow user to exceed class user limits
177 * kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
178 * dnsbl_exempt | exempt this user from dnsbls
179 * spambot_exempt | exempt this user from spambot checks
180 * shide_exempt | exempt this user from serverhiding
181 * jupe_exempt | exempt this user from generating
182 * warnings joining juped channels
183 * resv_exempt | exempt this user from resvs
184 * flood_exempt | exempt this user from flood limits
186 * no_tilde (old - flag) | don't prefix ~ to username if no ident
187 * need_ident (old + flag) | require ident for user in this class
188 * need_ssl | require SSL/TLS for user in this class
189 * need_sasl | require SASL id for user in this class
191 flags = kline_exempt, exceed_limit;
193 /* class: the class the user is placed in */
202 /* privset {} blocks MUST be specified before anything that uses them. That
203 * means they must be defined before operator {}.
206 privs = oper:local_kill, oper:operwall;
209 privset "server_bot" {
210 extends = "local_op";
211 privs = oper:kline, oper:remoteban, snomask:nick_changes;
214 privset "global_op" {
215 extends = "local_op";
216 privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
217 oper:resv, oper:mass_notice, oper:remoteban;
221 extends = "global_op";
222 privs = oper:admin, oper:die, oper:rehash, oper:spy;
226 /* name: the name of the oper must go above */
228 /* user: the user@host required for this operator. CIDR *is*
229 * supported now. auth{} spoofs work here, other spoofs do not.
230 * multiple user="" lines are supported.
232 user = "*god@127.0.0.1";
234 /* password: the password required to oper. Unless ~encrypted is
235 * contained in flags = ...; this will need to be encrypted using
236 * mkpasswd, MD5 is supported
238 password = "etcnjl8juSU1E";
240 /* rsa key: the public key for this oper when using Challenge.
241 * A password should not be defined when this is used, see
242 * doc/challenge.txt for more information.
244 #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
246 /* umodes: the specific umodes this oper gets when they oper.
247 * If this is specified an oper will not be given oper_umodes
248 * These are described above oper_only_umodes in general {};
250 #umodes = locops, servnotice, operwall, wallop;
252 /* fingerprint: if specified, the oper's client certificate
253 * fingerprint will be checked against the specified fingerprint
256 #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
258 /* snomask: specific server notice mask on oper up.
259 * If this is specified an oper will not be given oper_snomask.
261 snomask = "+Zbfkrsuy";
263 /* flags: misc options for the operator. You may prefix an option
264 * with ~ to disable it, e.g. ~encrypted.
266 * Default flags are encrypted.
270 * encrypted: the password above is encrypted [DEFAULT]
271 * need_ssl: must be using SSL/TLS to oper up
275 /* privset: privileges set to grant */
279 connect "irc.uplink.com" {
280 host = "192.168.0.1";
281 send_password = "password";
282 accept_password = "anotherpassword";
286 flags = compressed, topicburst;
288 /* If the connection is IPv6, uncomment below.
289 * Use 0::1, not ::1, for IPv6 localhost. */
293 connect "ssl.uplink.com" {
294 host = "192.168.0.1";
295 send_password = "password";
296 accept_password = "anotherpassword";
300 flags = ssl, topicburst;
304 name = "services.int";
309 flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv;
317 /* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
327 knock_delay = 5 minutes;
328 knock_delay_channel = 1 minute;
329 max_chans_per_user = 15;
331 max_bans_large = 500;
332 default_split_user_count = 0;
333 default_split_server_count = 0;
334 no_create_on_split = no;
335 no_join_on_split = no;
336 burst_topicwho = yes;
337 kick_on_split_riding = no;
338 only_ascii_channels = no;
339 resv_forcepart = yes;
344 links_delay = 5 minutes;
349 /* These are the blacklist settings.
350 * You can have multiple combinations of host and rejection reasons.
351 * They are used in pairs of one host/rejection reason.
353 * These settings should be adequate for most networks, and are (presently)
354 * required for use on AthemeNet.
356 * Word to the wise: Do not use blacklists like SPEWS for blocking IRC
359 * As of charybdis 2.1.3, you can do some keyword substitution on the rejection
360 * reason. The available keyword substitutions are:
362 * ${ip} - the user's IP
363 * ${host} - the user's canonical hostname
364 * ${dnsbl-host} - the dnsbl hostname the lookup was done against
365 * ${nick} - the user's nickname
366 * ${network-name} - the name of the network
368 * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
369 * contacted, via email, at admins@2mbit.com before using these BLs.
370 * See <http://www.ahbl.org/services.php> for more information.
373 host = "dnsbl.dronebl.org";
374 reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
376 # host = "ircbl.ahbl.org";
377 # reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
379 # host = "tor.ahbl.org";
380 # reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
416 hide_error_messages = opers;
417 hide_spoof_ips = yes;
420 * default_umodes: umodes to enable on connect.
421 * If you have enabled the new ip_cloaking_4.0 module, and you want
422 * to make use of it, add +x to this option, i.e.:
423 * default_umodes = "+ix";
425 * If you have enabled the old ip_cloaking module, and you want
426 * to make use of it, add +h to this option, i.e.:
427 * default_umodes = "+ih";
429 default_umodes = "+i";
431 default_operstring = "is an IRC Operator";
432 default_adminstring = "is a Server Administrator";
433 servicestring = "is a Network Service";
434 disable_fake_channels = no;
435 tkline_expire_notices = no;
436 default_floodcount = 10;
437 failed_oper_notice = yes;
440 min_nonwildcard_simple = 3;
443 anti_nick_flood = yes;
444 max_nick_time = 20 seconds;
445 max_nick_changes = 5;
446 anti_spam_exit_message_time = 5 minutes;
447 ts_warn_delta = 30 seconds;
448 ts_max_delta = 5 minutes;
451 global_snotices = yes;
452 dline_with_reason = yes;
453 kline_delay = 0 seconds;
454 kline_with_reason = yes;
455 kline_reason = "K-Lined";
456 identify_service = "NickServ@services.int";
457 identify_command = "IDENTIFY";
458 non_redundant_klines = yes;
460 use_propagated_bans = yes;
461 stats_e_disabled = no;
462 stats_c_oper_only=no;
463 stats_h_oper_only=no;
464 stats_y_oper_only=no;
465 stats_o_oper_only=yes;
466 stats_P_oper_only=no;
467 stats_i_oper_only=masked;
468 stats_k_oper_only=masked;
470 operspy_admin_only = no;
471 operspy_dont_care_user_info = no;
472 caller_id_wait = 1 minute;
473 pace_wait_simple = 1 second;
474 pace_wait = 10 seconds;
477 connect_timeout = 30 seconds;
482 use_whois_actually = no;
483 oper_only_umodes = operwall, locops, servnotice;
484 oper_umodes = locops, servnotice, operwall, wallop;
487 nick_delay = 0 seconds; # 15 minutes if you want to enable this
488 reject_ban_time = 1 minute;
489 reject_after_count = 3;
490 reject_duration = 5 minutes;
491 throttle_duration = 60;
497 path = "modules/autoload";