* Remote oper up notices -- sno_globaloper.so
* /whois notifications (snomask +W) -- sno_whois.so
* Oper-override (modehacking only) -- override.so
+ * Stop services kills -- no_kill_services.so
*/
#loadmodule "extensions/chm_adminonly.so";
#loadmodule "extensions/chm_operonly.so";
#loadmodule "extensions/sno_globaloper.so";
#loadmodule "extensions/sno_whois.so";
#loadmodule "extensions/override.so";
-
+#loadmodule "extensions/no_kill_services.so";
+
/* serverinfo {}: Contains information about the server. (OLD M:) */
serverinfo {
/* name: the name of our server */
* is on. Shown in the 005 reply and used with serverhiding.
*/
network_name = "MyNet";
- network_desc = "This is My Network";
/* hub: allow this server to act as a hub and have multiple servers
* connected to it.
/* vhost: the IP to bind to when we connect outward to ipv4 servers.
* This should be an ipv4 IP only.
*/
- #vhost = "192.169.0.1";
+ #vhost = "192.0.2.6";
/* vhost6: the IP to bind to when we connect outward to ipv6 servers.
* This should be an ipv6 IP only.
*/
- #vhost6 = "3ffe:80e8:546::2";
+ #vhost6 = "2001:db7:2::6";
/* ssl_private_key: our ssl private key */
ssl_private_key = "etc/ssl.key";
/* ssl_cert: certificate for our ssl server */
- ssl_cert = "etc/ssl.cert";
+ ssl_cert = "etc/ssl.pem";
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
ssl_dh_params = "etc/dh.pem";
*/
connectfreq = 5 minutes;
- /* max number: the amount of servers to autoconnect to */
+ /* max number: the amount of servers to autoconnect to. if the number
+ * of servers in the class is or exceeds this, no more servers in the
+ * class are autoconnected. oper initiated connects are unaffected.
+ * this should usually be set to either 0 or 1. (autoconnecting from
+ * hubs to leaves may cause leaves to function as hubs by having
+ * multiple servers connected to them.)
+ */
max_number = 1;
/* sendq: servers need a higher sendq as they are sent more data */
/* listen {}: contain information about the ports ircd listens on (OLD P:) */
listen {
+ /* defer_accept: wait for clients to send IRC handshake data before
+ * accepting them. if you intend to use software which depends on the
+ * server replying first, such as BOPM, you should disable this feature.
+ * otherwise, you probably want to leave it on.
+ */
+ defer_accept = yes;
+
/* port: the specific port to listen on. if no host is specified
* before, it will listen on all available IPs.
*
/* host: set a specific IP/host the ports after the line will listen
* on. This may be ipv4 or ipv6.
*/
- host = "1.2.3.4";
+ host = "192.0.2.6";
port = 7000, 7001;
sslport = 9000, 9001;
- host = "3ffe:1234:a:b:c::d";
+ host = "2001:db8:2::6";
port = 7002;
sslport = 9002;
};
* prepending a 0 if it starts with a colon) and can also use CIDR
* masks.
*/
- user = "*@172.16.0.0/12";
- user = "*test@123D:B567:*";
+ user = "*@198.51.100.0/24";
+ user = "*test@2001:db8:1:*";
+
+ /* auth_user: This allows specifying a username:password instead of
+ * just a password in PASS, so that a fixed user@host is not
+ * necessary for a specific auth{} block.
+ */
+ #auth_user = "SomeUser";
/* password: an optional password that is required to use this block.
* By default this is not encrypted, specify the flag "encrypted" in
* not have to obey the redirection, the ircd just suggests to them
* an alternative server.
*/
- redirserv = "irc.some.domain";
+ redirserv = "irc.example.net";
redirport = 6667;
- user = "*.some.domain";
+ user = "*.example.com";
/* class: a class is required even though it is not used */
class = "users";
auth {
user = "*@*";
class = "users";
-
- flags = need_ident;
};
/* privset{}: defines operator privilege sets. */
/* host: the host or IP to connect to. If a hostname is used it
* must match the reverse dns of the server.
*/
- host = "192.168.0.1";
+ host = "203.0.113.3";
/* vhost: the host or IP to bind to for this connection. If this
* is not specified, the default vhost (in serverinfo {}) is used.
*/
- #vhost = "192.168.0.50";
+ #vhost = "192.0.2.131";
/* passwords: the passwords we send (OLD C:) and accept (OLD N:).
* The remote server will have these passwords reversed.
* if applicable. Addresses starting with a colon get an extra
* zero prepended, for example: 0::1
*/
- host = "3ffd:dead:beef::1";
+ host = "2001:db8:3::8";
send_password = "password";
accept_password = "password";
port = 6666;
/* Example of ssl server-to-server connection, ssl flag doesn't need
* compressed flag, 'cause it uses own compression
*/
- host = "192.168.0.1";
+ host = "203.0.113.129";
send_password = "password";
accept_password = "anotherpassword";
port = 9999;
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
exempt {
- ip = "192.168.0.0/16";
+ ip = "192.0.2.0/24";
/* these may be stacked */
ip = "127.0.0.1";
- ip = "10.0.0.0/8";
};
/* The channel block contains options pertaining to channels */
* IPv4 is currently the default as few blacklists support IPv6 operation
* as of this writing.
*
- * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
- * contacted, via email, at admins@2mbit.com before using these BLs.
- * See <http://www.ahbl.org/services.php> for more information.
+ * As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
+ * is considered a match. If included, a comma-separated list of *quoted*
+ * strings is allowed to match queries. They may be of the format "0" to "255"
+ * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
+ * an A record. The blacklist is only applied if it matches anything in the
+ * list. You may freely mix full IP's and final octets.
+ *
+ * Consult your blacklist provider for the meaning of these parameters; they
+ * are usually used to denote different ban types.
*/
blacklist {
host = "rbl.efnetrbl.org";
type = ipv4;
reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
-# host = "ircbl.ahbl.org";
-# type = ipv4;
-# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
-#
-# host = "tor.ahbl.org";
-# type = ipv4;
-# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
-#
- /* Example of a blacklist that supports both IPv4 and IPv6 */
+ /* Example of a blacklist that supports both IPv4 and IPv6 and using matches */
# host = "foobl.blacklist.invalid";
+# matches = "4", "6", "127.0.0.10";
# type = ipv4, ipv6;
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
};
* If disabled, local opers can see them.
* Dynamic spoofs (e.g. set by services) are unaffected by this;
* any oper (local and remote) can see the real ip.
- * Warning: for whowas, this is checked when the client exits,
- * not when the IP is shown.
*/
hide_spoof_ips = yes;
*/
servicestring = "is a Network Service";
+ /*
+ * Nick of the network's SASL agent. Used to check whether services are here,
+ * SASL credentials are only sent to its server. Needs to be a service.
+ *
+ * Defaults to SaslServ if unspecified.
+ */
+ sasl_service = "SaslServ";
+
/* disable fake channels: disable local users joining fake versions
* of channels, eg #foo^B^B. Disables bold, mirc colour, reverse,
* underline and hard space. (ASCII 2, 3, 22, 31, 160 respectively).
/* max accept: maximum allowed /accept's for +g usermode */
max_accept = 20;
- /* max monitor: the maximum amount of nicknames a client may have in
- * their monitor (server-side notify) list.
- */
- max_monitor = 100;
-
/* nick flood: enable the nickflood control code */
anti_nick_flood = yes;
ts_warn_delta = 30 seconds;
ts_max_delta = 5 minutes;
- /* client exit: prepend a users quit message with "Client exit: " */
+ /* client exit: prepend a user's quit message with "Quit: " */
client_exit = yes;
/* collision fnc: change user's nick to their UID instead of
*/
collision_fnc = yes;
+ /* resv fnc: change a user's nick to a nick they have recently used
+ * (or their UID, if no such nick can be found) when a resv matching
+ * them is set by services. Only enable this if all servers on the
+ * network allow remote nicks to start with a digit.
+ */
+ resv_fnc = yes;
+
/* global snotices: send out certain snotices (most +b, +f, +y,
* some +s) to other servers via ENCAP SNOTE. Received SNOTEs are
* displayed unconditionally.
* provided they have umode +s set */
oper_snomask = "+s";
- /* use egd: if your system does not have *random devices yet you
- * want to use OpenSSL and encrypted links, enable this. Beware -
- * EGD is *very* CPU intensive when gathering data for its pool
- */
- #use_egd = yes;
-
- /* egdpool path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
- * which automatically finds the path.
- */
- #egdpool_path = "/var/run/egd-pool";
-
-
/* compression level: level of compression for compressed links between
* servers.
*
* you're doing.
*/
max_ratelimit_tokens = 30;
+
+ /* away_interval: the minimum interval between AWAY commands. One
+ * additional AWAY command is allowed, and only marking as away
+ * counts.
+ */
+ away_interval = 30;
};
modules {
projects / solanum.git / blobdiff