-/* doc/example.conf - brief example configuration file
+/* doc/ircd.conf.example - brief example configuration file
*
* Copyright (C) 2000-2002 Hybrid Development Team
* Copyright (C) 2002-2005 ircd-ratbox development team
* Copyright (C) 2005-2006 charybdis development team
*
- * $Id: example.conf 3582 2007-11-17 21:55:48Z jilles $
- *
* See reference.conf for more information.
*/
/* Extensions */
-#loadmodule "extensions/chm_operonly_compat.so";
-#loadmodule "extensions/chm_quietunreg_compat.so";
-#loadmodule "extensions/chm_sslonly_compat.so";
-#loadmodule "extensions/createauthonly.so";
-#loadmodule "extensions/extb_account.so";
-#loadmodule "extensions/extb_canjoin.so";
-#loadmodule "extensions/extb_channel.so";
-#loadmodule "extensions/extb_extgecos.so";
-#loadmodule "extensions/extb_oper.so";
-#loadmodule "extensions/extb_realname.so";
-#loadmodule "extensions/extb_server.so";
-#loadmodule "extensions/extb_ssl.so";
-#loadmodule "extensions/hurt.so";
-#loadmodule "extensions/m_findforwards.so";
-#loadmodule "extensions/m_identify.so";
-#loadmodule "extensions/no_oper_invis.so";
-#loadmodule "extensions/sno_farconnect.so";
-#loadmodule "extensions/sno_globalkline.so";
-#loadmodule "extensions/sno_globaloper.so";
-#loadmodule "extensions/sno_whois.so";
-#loadmodule "extensions/override.so";
-#loadmodule "extensions/no_kill_services.so";
+#loadmodule "extensions/chm_nonotice";
+#loadmodule "extensions/chm_operpeace";
+#loadmodule "extensions/createauthonly";
+#loadmodule "extensions/extb_account";
+#loadmodule "extensions/extb_canjoin";
+#loadmodule "extensions/extb_channel";
+#loadmodule "extensions/extb_combi";
+#loadmodule "extensions/extb_extgecos";
+#loadmodule "extensions/extb_hostmask";
+#loadmodule "extensions/extb_oper";
+#loadmodule "extensions/extb_realname";
+#loadmodule "extensions/extb_server";
+#loadmodule "extensions/extb_ssl";
+#loadmodule "extensions/extb_usermode";
+#loadmodule "extensions/hurt";
+#loadmodule "extensions/m_extendchans";
+#loadmodule "extensions/m_findforwards";
+#loadmodule "extensions/m_identify";
+#loadmodule "extensions/m_locops";
+#loadmodule "extensions/no_oper_invis";
+#loadmodule "extensions/sno_farconnect";
+#loadmodule "extensions/sno_globalnickchange";
+#loadmodule "extensions/sno_globaloper";
+#loadmodule "extensions/override";
+#loadmodule "extensions/no_kill_services";
/*
* IP cloaking extensions: use ip_cloaking_4.0
* if you're linking 3.2 and later, otherwise use
- * ip_cloaking.so, for compatibility with older 3.x
+ * ip_cloaking, for compatibility with older 3.x
* releases.
*/
-#loadmodule "extensions/ip_cloaking_4.0.so";
-#loadmodule "extensions/ip_cloaking.so";
+#loadmodule "extensions/ip_cloaking_4.0";
+#loadmodule "extensions/ip_cloaking";
serverinfo {
name = "hades.arpa";
sid = "42X";
- description = "charybdis test server";
+ description = "solanum test server";
network_name = "StaticBox";
- network_desc = "Your IRC network.";
- hub = yes;
/* On multi-homed hosts you may need the following. These define
* the addresses we connect from to other servers. */
#vhost = "192.0.2.6";
/* for IPv6 */
#vhost6 = "2001:db8:2::6";
-
- /* ssl_private_key: our ssl private key */
- ssl_private_key = "etc/ssl.key";
- /* ssl_cert: certificate for our ssl server */
- ssl_cert = "etc/ssl.cert";
+ /* ssl_cert: certificate (and optionally key) for our ssl server */
+ ssl_cert = "etc/ssl.pem";
+
+ /* ssl_private_key: our ssl private key (if not contained in ssl_cert file) */
+ #ssl_private_key = "etc/ssl.key";
- /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
+ /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 2048
+ * In general, the DH parameters size should be the same as your key's size.
+ * However it has been reported that some clients have broken TLS implementations which may
+ * choke on keysizes larger than 2048-bit, so we would recommend using 2048-bit DH parameters
+ * for now if your keys are larger than 2048-bit.
+ *
+ * If you do not provide parameters, some TLS backends will fail on DHE- ciphers,
+ * and some will succeed but use weak, common DH groups! */
ssl_dh_params = "etc/dh.pem";
/* ssld_count: number of ssld processes you want to start, if you
/* Listen on IPv6 (if you used host= above). */
#host = "2001:db8:2::6";
#port = 5000, 6665 .. 6669;
- #sslport = 9999;
+ #sslport = 6697;
+
+ /* wsock: listeners defined with this option enabled will be websocket listeners,
+ * and will not accept normal clients.
+ */
+ wsock = yes;
+ sslport = 9999;
};
/* auth {}: allow users to connect to the ircd (OLD I:)
* flags = ...; below if it is.
*/
password = "letmein";
-
+
/* spoof: fake the users user@host to be be this. You may either
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
spoof = "I.still.hate.packets";
/* Possible flags in auth:
- *
+ *
* encrypted | password is encrypted with mkpasswd
* spoof_notice | give a notice when spoofing hosts
* exceed_limit (old > flag) | allow user to exceed class user limits
- * kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
- * dnsbl_exempt | exempt this user from dnsbls
- * spambot_exempt | exempt this user from spambot checks
- * shide_exempt | exempt this user from serverhiding
+ * kline_exempt (old ^ flag) | exempt this user from k/g/xlines,
+ * | dnsbls, and proxies
+ * proxy_exempt | exempt this user from proxies
+ * dnsbl_exempt | exempt this user from dnsbls
+ * spambot_exempt | exempt this user from spambot checks
+ * shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
- * resv_exempt | exempt this user from resvs
+ * resv_exempt | exempt this user from resvs
* flood_exempt | exempt this user from flood limits
- * USE WITH CAUTION.
+ * USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
* need_ssl | require SSL/TLS for user in this class
* need_sasl | require SASL id for user in this class
*/
flags = kline_exempt, exceed_limit;
-
+
/* class: the class the user is placed in */
class = "opers";
};
* means they must be defined before operator {}.
*/
privset "local_op" {
- privs = oper:local_kill, oper:operwall;
+ privs = oper:general, oper:privs, oper:testline, oper:kill, oper:operwall, oper:message,
+ usermode:servnotice, auspex:oper, auspex:hostname, auspex:umodes, auspex:cmodes;
};
privset "server_bot" {
privset "global_op" {
extends = "local_op";
- privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
- oper:resv, oper:mass_notice, oper:remoteban;
+ privs = oper:routing, oper:kline, oper:unkline, oper:xline,
+ oper:resv, oper:cmodes, oper:mass_notice, oper:wallops,
+ oper:remoteban;
};
privset "admin" {
extends = "global_op";
- privs = oper:admin, oper:die, oper:rehash, oper:spy;
+ privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant;
};
operator "god" {
user = "*god@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is
- * contained in flags = ...; this will need to be encrypted using
+ * contained in flags = ...; this will need to be encrypted using
* mkpasswd, MD5 is supported
*/
password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge.
- * A password should not be defined when this is used, see
+ * A password should not be defined when this is used, see
* doc/challenge.txt for more information.
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
privset = "admin";
};
+// See connecting-servers.rst for an introduction to using these files.
+
connect "irc.uplink.com" {
host = "203.0.113.3";
send_password = "password";
accept_password = "anotherpassword";
port = 6666;
- hub_mask = "*";
class = "server";
- flags = compressed, topicburst;
+ flags = topicburst;
#fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
-
- /* If the connection is IPv6, uncomment below.
- * Use 0::1, not ::1, for IPv6 localhost. */
- #aftype = ipv6;
};
connect "ssl.uplink.com" {
send_password = "password";
accept_password = "anotherpassword";
port = 9999;
- hub_mask = "*";
class = "server";
flags = ssl, topicburst;
};
flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv;
};
-shared {
- oper = "*@*", "*";
- flags = all, rehash;
+secure {
+ ip = "127.0.0.1";
};
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
knock_delay = 5 minutes;
knock_delay_channel = 1 minute;
max_chans_per_user = 15;
+ max_chans_per_user_large = 60;
max_bans = 100;
max_bans_large = 500;
default_split_user_count = 0;
resv_forcepart = yes;
channel_target_change = yes;
disable_local_channels = no;
+ autochanmodes = "+nt";
+ displayed_usercount = 3;
+ strip_topic_colors = no;
+ opmod_send_statusmsg = no;
};
serverhide {
disable_hidden = no;
};
-/* These are the blacklist settings.
+/* These are the DNSBL settings.
* You can have multiple combinations of host and rejection reasons.
* They are used in pairs of one host/rejection reason.
*
- * These settings should be adequate for most networks, and are (presently)
- * required for use on StaticBox.
+ * The default settings should be adequate for most networks.
*
- * Word to the wise: Do not use blacklists like SPEWS for blocking IRC
- * connections.
+ * It is not recommended to use DNSBL services designed for e-mail spam
+ * prevention, such as SPEWS for blocking IRC connections.
*
* As of charybdis 2.2, you can do some keyword substitution on the rejection
* reason. The available keyword substitutions are:
* as of this writing.
*
* As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
- * is considered a match. If included, a comma-separated list of *quoted*
+ * is considered a match. If included, a comma-separated list of *quoted*
* strings is allowed to match queries. They may be of the format "0" to "255"
* to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
- * an A record. The blacklist is only applied if it matches anything in the
+ * an A record. The DNSBL match is only applied if it matches anything in the
* list. You may freely mix full IP's and final octets.
*
- * Consult your blacklist provider for the meaning of these parameters; they
- * are usually used to denote different ban types.
- *
- * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
- * contacted, via email, at admins@2mbit.com before using these BLs.
- * See <http://www.ahbl.org/services.php> for more information.
+ * Consult your DNSBL provider for the meaning of these parameters; they
+ * are usually used to denote different block reasons.
*/
-blacklist {
+dnsbl {
host = "rbl.efnetrbl.org";
type = ipv4;
reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
-# host = "ircbl.ahbl.org";
-# type = ipv4;
-# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
-#
-# host = "tor.ahbl.org";
-# type = ipv4;
-# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
-#
/* Example of a blacklist that supports both IPv4 and IPv6 and using matches */
# host = "foobl.blacklist.invalid";
# type = ipv4, ipv6;
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
};
+/* These are the OPM settings.
+ * This is similar to the functionality provided by BOPM. It will scan incoming
+ * connections for open proxies by connecting to clients and attempting several
+ * different open proxy handshakes. If they connect back to us (via a dedicated
+ * listening port), and send back the data we send them, they are considered
+ * an open proxy. For politeness reasons (users may be confused by the incoming
+ * connection attempts if they are logging incoming connections), the user is
+ * notified upon connect if they are being scanned.
+ *
+ * WARNING:
+ * These settings are considered experimental. Only the most common proxy types
+ * are checked for (Charybdis is immune from POST and GET proxies). If you are
+ * not comfortable with experimental code, do not use this feature.
+ */
+#opm {
+ /* IPv4 address to listen on. This must be a publicly facing IP address
+ * to be effective.
+ * If omitted, it defaults to serverinfo::vhost.
+ */
+ #listen_ipv4 = "127.0.0.1";
+
+ /* IPv4 port to listen on.
+ * This should not be the same as any existing listeners.
+ */
+ #port_v4 = 32000;
+
+ /* IPv6 address to listen on. This must be a publicly facing IP address
+ * to be effective.
+ * If omitted, it defaults to serverinfo::vhost6.
+ */
+ #listen_ipv6 = "::1";
+
+ /* IPv6 port to listen on.
+ * This should not be the same as any existing listeners.
+ */
+ #port_v6 = 32000;
+
+ /* You can also set the listen_port directive which will set both the
+ * IPv4 and IPv6 ports at once.
+ */
+ #listen_port = 32000;
+
+ /* This sets the timeout in seconds before ending open proxy scans.
+ * Values less than 1 or greater than 60 are ignored.
+ * It is advisable to keep it as short as feasible, so clients do not
+ * get held up by excessively long scan times.
+ */
+ #timeout = 5;
+
+ /* These are the ports to scan for SOCKS4 proxies on. They may overlap
+ * with other scan types. Sensible defaults are given below.
+ */
+ #socks4_ports = 1080, 10800, 443, 80, 8080, 8000;
+
+ /* These are the ports to scan for SOCKS5 proxies on. They may overlap
+ * with other scan types. Sensible defaults are given below.
+ */
+ #socks5_ports = 1080, 10800, 443, 80, 8080, 8000;
+
+ /* These are the ports to scan for HTTP connect proxies on (plaintext).
+ * They may overlap with other scan types. Sensible defaults are given
+ * below.
+ */
+ #httpconnect_ports = 80, 8080, 8000;
+
+ /* These are the ports to scan for HTTPS CONNECT proxies on (SSL).
+ * They may overlap with other scan types. Sensible defaults are given
+ * below.
+ */
+ #httpsconnect_ports = 443, 4443;
+#};
+
alias "NickServ" {
target = "NickServ";
};
default_operstring = "is an IRC Operator";
default_adminstring = "is a Server Administrator";
servicestring = "is a Network Service";
+
+ /*
+ * Nick of the network's SASL agent. Used to check whether services are here,
+ * SASL credentials are only sent to its server. Needs to be a service.
+ *
+ * Defaults to SaslServ if unspecified.
+ */
+ sasl_service = "SaslServ";
disable_fake_channels = no;
tkline_expire_notices = no;
default_floodcount = 10;
failed_oper_notice = yes;
- dots_in_ident=2;
+ dots_in_ident = 2;
min_nonwildcard = 4;
min_nonwildcard_simple = 3;
max_accept = 100;
resv_fnc = yes;
global_snotices = yes;
dline_with_reason = yes;
- kline_delay = 0 seconds;
kline_with_reason = yes;
+ hide_tkdline_duration = no;
kline_reason = "K-Lined";
+ sasl_only_client_message = "You need to identify via SASL to use this server.";
+ identd_only_client_message = "You need to install identd to use this server.";
+ sctp_forbidden_client_message = "You are not allowed to use SCTP on this server.";
+ ssltls_only_client_message = "You need to use SSL/TLS to use this server.";
+ not_authorised_client_message = "You are not authorised to access this server.";
+ illegal_hostname_client_message = "You have an illegal character in your hostname.";
+ server_full_client_message = "Sorry, server is full - try later";
+ illegal_name_long_client_message = "Your username is invalid. Please make sure that your username contains "
+ "only alphanumeric characters.";
+ illegal_name_short_client_message = "Invalid username";
identify_service = "NickServ@services.int";
identify_command = "IDENTIFY";
non_redundant_klines = yes;
warn_no_nline = yes;
use_propagated_bans = yes;
stats_e_disabled = no;
- stats_c_oper_only=no;
- stats_h_oper_only=no;
- stats_y_oper_only=no;
- stats_o_oper_only=yes;
- stats_P_oper_only=no;
- stats_i_oper_only=masked;
- stats_k_oper_only=masked;
+ stats_c_oper_only = no;
+ stats_y_oper_only = no;
+ stats_o_oper_only = yes;
+ stats_P_oper_only = no;
+ stats_i_oper_only = masked;
+ stats_k_oper_only = masked;
map_oper_only = no;
operspy_admin_only = no;
operspy_dont_care_user_info = no;
no_oper_flood = yes;
max_targets = 4;
client_flood_max_lines = 20;
+ post_registration_delay = 0 seconds;
use_whois_actually = no;
oper_only_umodes = operwall, locops, servnotice;
oper_umodes = locops, servnotice, operwall, wallop;
throttle_count = 4;
max_ratelimit_tokens = 30;
away_interval = 30;
+ certfp_method = spki_sha256;
+ hide_opers_in_whois = no;
+ tls_ciphers_oper_only = no;
};
modules {