*/
/* Extensions */
+#loadmodule "extensions/chm_operonly_compat.so";
+#loadmodule "extensions/chm_quietunreg_compat.so";
+#loadmodule "extensions/chm_sslonly_compat.so";
#loadmodule "extensions/createauthonly.so";
#loadmodule "extensions/extb_account.so";
#loadmodule "extensions/extb_canjoin.so";
#loadmodule "extensions/extb_oper.so";
#loadmodule "extensions/extb_realname.so";
#loadmodule "extensions/extb_server.so";
+#loadmodule "extensions/extb_ssl.so";
#loadmodule "extensions/hurt.so";
-#loadmodule "extensions/ip_cloaking.so";
#loadmodule "extensions/m_findforwards.so";
#loadmodule "extensions/m_identify.so";
#loadmodule "extensions/no_oper_invis.so";
#loadmodule "extensions/sno_globalkline.so";
#loadmodule "extensions/sno_globaloper.so";
#loadmodule "extensions/sno_whois.so";
+#loadmodule "extensions/override.so";
+
+/*
+ * IP cloaking extensions: use ip_cloaking_4.0
+ * if you're linking 3.2 and later, otherwise use
+ * ip_cloaking.so, for compatibility with older 3.x
+ * releases.
+ */
+
+#loadmodule "extensions/ip_cloaking_4.0.so";
+#loadmodule "extensions/ip_cloaking.so";
serverinfo {
name = "hades.arpa";
sid = "42X";
description = "charybdis test server";
- network_name = "AthemeNET";
+ network_name = "StaticBox";
network_desc = "Your IRC network.";
hub = yes;
#vhost = "192.169.0.1";
/* for IPv6 */
#vhost6 = "3ffe:80e8:546::2";
+
+ /* ssl_private_key: our ssl private key */
+ ssl_private_key = "etc/ssl.key";
+
+ /* ssl_cert: certificate for our ssl server */
+ ssl_cert = "etc/ssl.cert";
+
+ /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
+ ssl_dh_params = "etc/dh.pem";
+
+ /* ssld_count: number of ssld processes you want to start, if you
+ * have a really busy server, using N-1 where N is the number of
+ * cpu/cpu cores you have might be useful. A number greater than one
+ * can also be useful in case of bugs in ssld and because ssld needs
+ * two file descriptors per SSL connection.
+ */
+ ssld_count = 1;
- /* max_clients: This should be set to the maximum amount of clients
- * that the server should support. Note that you should leave some
- * file descriptors free for log files, server connections, ident
- * lookups (if enabled), exceed_limit clients, etc.
+ /* default max clients: the default maximum number of clients
+ * allowed to connect. This can be changed once ircd has started by
+ * issuing:
+ * /quote set maxclients <limit>
*/
- max_clients = 1024;
+ default_max_clients = 1024;
+
+ /* nicklen: enforced nickname length (for this server only; must not
+ * be longer than the maximum length set while building).
+ */
+ nicklen = 30;
};
admin {
name = "Lazy admin (lazya)";
- description = "AthemeNET client server";
+ description = "StaticBox client server";
email = "nobody@127.0.0.1";
};
fname_operlog = "logs/operlog";
#fname_foperlog = "logs/foperlog";
fname_serverlog = "logs/serverlog";
- fname_glinelog = "logs/glinelog";
#fname_klinelog = "logs/klinelog";
fname_killlog = "logs/killlog";
fname_operspylog = "logs/operspylog";
*/
class "users" {
ping_time = 2 minutes;
- number_per_ident = 10;
+ number_per_ident = 10;
number_per_ip = 10;
- number_per_ip_global = 50;
- cidr_bitlen = 64;
- number_per_cidr = 8;
+ number_per_ip_global = 50;
+ cidr_ipv4_bitlen = 24;
+ cidr_ipv6_bitlen = 64;
+ number_per_cidr = 200;
max_number = 3000;
sendq = 400 kbytes;
};
};
listen {
+ /* defer_accept: wait for clients to send IRC handshake data before
+ * accepting them. if you intend to use software which depends on the
+ * server replying first, such as BOPM, you should disable this feature.
+ * otherwise, you probably want to leave it on.
+ */
+ defer_accept = yes;
+
/* If you want to listen on a specific IP only, specify host.
* host definitions apply only to the following port line.
*/
#host = "192.169.0.1";
port = 5000, 6665 .. 6669;
+ sslport = 6697;
/* Listen on IPv6 (if you used host= above). */
#host = "3ffe:1234:a:b:c::d";
- #port = 5000, 6665 .. 6669;
+ #port = 5000, 6665 .. 6669;
+ #sslport = 9999;
};
/* auth {}: allow users to connect to the ircd (OLD I:)
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
*/
- spoof = "I.still.hate.packets";
+ spoof = "I.still.hate.packets";
/* Possible flags in auth:
*
* exceed_limit (old > flag) | allow user to exceed class user limits
* kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
* dnsbl_exempt | exempt this user from dnsbls
- * gline_exempt (old _ flag) | exempt this user from glines
* spambot_exempt | exempt this user from spambot checks
* shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
* resv_exempt | exempt this user from resvs
- * flood_exempt | exempt this user from flood limits
- * USE WITH CAUTION.
+ * flood_exempt | exempt this user from flood limits
+ * USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
+ * need_ssl | require SSL/TLS for user in this class
* need_sasl | require SASL id for user in this class
*/
flags = kline_exempt, exceed_limit;
class = "users";
};
+/* privset {} blocks MUST be specified before anything that uses them. That
+ * means they must be defined before operator {}.
+ */
+privset "local_op" {
+ privs = oper:local_kill, oper:operwall;
+};
+
+privset "server_bot" {
+ extends = "local_op";
+ privs = oper:kline, oper:remoteban, snomask:nick_changes;
+};
+
+privset "global_op" {
+ extends = "local_op";
+ privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
+ oper:resv, oper:mass_notice, oper:remoteban;
+};
+
+privset "admin" {
+ extends = "global_op";
+ privs = oper:admin, oper:die, oper:rehash, oper:spy;
+};
+
operator "god" {
/* name: the name of the oper must go above */
*/
#umodes = locops, servnotice, operwall, wallop;
+ /* fingerprint: if specified, the oper's client certificate
+ * fingerprint will be checked against the specified fingerprint
+ * below.
+ */
+ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
/* snomask: specific server notice mask on oper up.
* If this is specified an oper will not be given oper_snomask.
*/
snomask = "+Zbfkrsuy";
- /* privileges: controls the activities and commands an oper is
- * allowed to do on the server. You may prefix an option with ~ to
- * disable it, ie ~operwall
+ /* flags: misc options for the operator. You may prefix an option
+ * with ~ to disable it, e.g. ~encrypted.
*
- * Default flags are operwall, remoteban and encrypted.
+ * Default flags are encrypted.
*
* Available options:
*
* encrypted: the password above is encrypted [DEFAULT]
- * local_kill: allows local users to be /KILL'd
- * global_kill: allows local and remote users to be
- * /KILL'd (OLD 'O' flag)
- * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
- * kline: allows KLINE and DLINE (OLD 'K' flag)
- * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
- * gline: allows GLINE (OLD 'G' flag)
- * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
- * via snomask +n
- * rehash: allows oper to REHASH config (OLD 'H' flag)
- * die: allows DIE and RESTART (OLD 'D' flag)
- * admin: gives admin privileges. admins
- * may (un)load modules and see the
- * real IPs of servers.
- * hidden_admin: gives admin privileges except
- * will not have the admin lines in
- * stats p and whois.
- * xline: allows use of /quote xline/unxline
- * resv: allows /quote resv/unresv and cmode +LP [DEFAULT]
- * operwall: allows the oper to send/receive operwalls [DEFAULT]
- * oper_spy: allows 'operspy' features to see through +s
- * channels etc. see /quote help operspy
- * hidden_oper: hides the oper from /stats p (OLD UMODE +p)
- * remoteban: allows remote kline etc [DEFAULT]
- */
- flags = global_kill, remote, kline, unkline, gline,
- die, rehash, admin, xline, operwall;
+ * need_ssl: must be using SSL/TLS to oper up
+ */
+ flags = encrypted;
+
+ /* privset: privileges set to grant */
+ privset = "admin";
};
connect "irc.uplink.com" {
class = "server";
flags = compressed, topicburst;
+ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
/* If the connection is IPv6, uncomment below.
* Use 0::1, not ::1, for IPv6 localhost. */
#aftype = ipv6;
};
+connect "ssl.uplink.com" {
+ host = "192.168.0.1";
+ send_password = "password";
+ accept_password = "anotherpassword";
+ port = 9999;
+ hub_mask = "*";
+ class = "server";
+ flags = ssl, topicburst;
+};
+
service {
name = "services.int";
};
channel {
use_invex = yes;
use_except = yes;
- use_knock = yes;
use_forward = yes;
+ use_knock = yes;
knock_delay = 5 minutes;
knock_delay_channel = 1 minute;
max_chans_per_user = 15;
- max_bans = 100;
- max_bans_large = 500;
+ max_bans = 100;
+ max_bans_large = 500;
default_split_user_count = 0;
default_split_server_count = 0;
no_create_on_split = no;
no_join_on_split = no;
burst_topicwho = yes;
kick_on_split_riding = no;
+ only_ascii_channels = no;
+ resv_forcepart = yes;
+ channel_target_change = yes;
+ disable_local_channels = no;
};
serverhide {
flatten_links = yes;
links_delay = 5 minutes;
- hidden = no;
+ hidden = no;
disable_hidden = no;
};
/* These are the blacklist settings.
* You can have multiple combinations of host and rejection reasons.
- * They are used in pairs of one host/rejection reason, or multiple hosts/rejection reason.
+ * They are used in pairs of one host/rejection reason.
*
* These settings should be adequate for most networks, and are (presently)
- * required for use on AthemeNet.
+ * required for use on StaticBox.
*
* Word to the wise: Do not use blacklists like SPEWS for blocking IRC
* connections.
*
- * As of charybdis 2.1.3, you can do some keyword substitution on the rejection
+ * As of charybdis 2.2, you can do some keyword substitution on the rejection
* reason. The available keyword substitutions are:
*
* ${ip} - the user's IP
* ${nick} - the user's nickname
* ${network-name} - the name of the network
*
+ * As of charybdis 3.4, a type parameter is supported, which specifies the
+ * address families the blacklist supports. IPv4 and IPv6 are supported.
+ * IPv4 is currently the default as few blacklists support IPv6 operation
+ * as of this writing.
+ *
* Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
* contacted, via email, at admins@2mbit.com before using these BLs.
* See <http://www.ahbl.org/services.php> for more information.
*/
blacklist {
- host = "dnsbl.dronebl.org";
- reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
+ host = "rbl.efnetrbl.org";
+ type = ipv4;
+ reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
# host = "ircbl.ahbl.org";
+# type = ipv4;
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
#
# host = "tor.ahbl.org";
+# type = ipv4;
# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
+#
+ /* Example of a blacklist that supports both IPv4 and IPv6 */
+# host = "foobl.blacklist.invalid";
+# type = ipv4, ipv6;
+# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
};
alias "NickServ" {
/*
* default_umodes: umodes to enable on connect.
- * If you have enabled the ip_cloaking module, and you want
+ * If you have enabled the new ip_cloaking_4.0 module, and you want
+ * to make use of it, add +x to this option, i.e.:
+ * default_umodes = "+ix";
+ *
+ * If you have enabled the old ip_cloaking module, and you want
* to make use of it, add +h to this option, i.e.:
* default_umodes = "+ih";
*/
default_adminstring = "is a Server Administrator";
servicestring = "is a Network Service";
disable_fake_channels = no;
- tkline_expire_notices = no;
- default_floodcount = 10;
+ tkline_expire_notices = no;
+ default_floodcount = 10;
failed_oper_notice = yes;
dots_in_ident=2;
min_nonwildcard = 4;
min_nonwildcard_simple = 3;
- max_accept = 100;
+ max_accept = 100;
max_monitor = 100;
anti_nick_flood = yes;
max_nick_time = 20 seconds;
max_nick_changes = 5;
- anti_spam_exit_message_time = 5 minutes;
+ anti_spam_exit_message_time = 5 minutes;
ts_warn_delta = 30 seconds;
ts_max_delta = 5 minutes;
client_exit = yes;
collision_fnc = yes;
+ resv_fnc = yes;
global_snotices = yes;
dline_with_reason = yes;
kline_delay = 0 seconds;
identify_command = "IDENTIFY";
non_redundant_klines = yes;
warn_no_nline = yes;
+ use_propagated_bans = yes;
stats_e_disabled = no;
stats_c_oper_only=no;
stats_h_oper_only=no;
stats_P_oper_only=no;
stats_i_oper_only=masked;
stats_k_oper_only=masked;
- map_oper_only = no;
+ map_oper_only = no;
operspy_admin_only = no;
operspy_dont_care_user_info = no;
caller_id_wait = 1 minute;
short_motd = no;
ping_cookie = no;
connect_timeout = 30 seconds;
+ default_ident_timeout = 5;
disable_auth = no;
no_oper_flood = yes;
- glines = no;
- gline_time = 1 day;
- gline_min_cidr = 16;
- idletime = 0;
max_targets = 4;
- client_flood = 20;
- use_whois_actually = no;
+ client_flood_max_lines = 20;
+ use_whois_actually = no;
oper_only_umodes = operwall, locops, servnotice;
oper_umodes = locops, servnotice, operwall, wallop;
oper_snomask = "+s";
- burst_away = yes;
+ burst_away = yes;
nick_delay = 0 seconds; # 15 minutes if you want to enable this
reject_ban_time = 1 minute;
reject_after_count = 3;
reject_duration = 5 minutes;
- max_unknown_ip = 2;
+ throttle_duration = 60;
+ throttle_count = 4;
+ max_ratelimit_tokens = 30;
+ away_interval = 30;
};
modules {