* Charybdis contains several extensions that are not enabled by default.
* To use them, uncomment the lines below.
*
- * Channel mode +-A (admin only) -- chm_adminonly.so
- * Channel mode +-O (oper only) -- chm_operonly.so
- * Channel mode +-S (ssl only) -- chm_sslonly.so
- * Emulates channel mode +-O (oper only) (+-iI $o) -- chm_operonly_compat.so
- * Emulates channel mode +-R (quiet unreg) (+-q $~a) -- chm_quietunreg_compat.so
- * Emulates channel mode +-S (ssl only) (+-b $~z) -- chm_sslonly_compat.so
- * Restrict channel creation to logged in users -- createauthonly.so
- * Account bans (+b $a[:mask]) -- extb_account.so
- * Banned from another channel (+b $j:mask) -- extb_canjoin.so
- * Other-channel bans (+b $c:mask) -- extb_channel.so
- * Extended ban (+b $x:mask) -- extb_extgecos.so
- * Oper bans (+b $o) -- extb_oper.so
- * Realname (gecos) bans (+b $r:mask) -- extb_realname.so
- * Server bans (+b $s:mask) -- extb_server.so
- * SSL bans (+b $z) -- extb_ssl.so
- * HURT system -- hurt.so
- * New host mangling (umode +x) -- ip_cloaking_4.0.so
- * Old host mangling (umode +h) -- ip_cloaking.so
- * Find channel forwards -- m_findforwards.so
- * /identify support -- m_identify.so
- * Opers cannot be invisible (umode +i) -- no_oper_invis.so
- * Far connection notices (snomask +F) -- sno_farconnect.so
- * Remote k/d/x line active notices -- sno_globalkline.so
- * Remote oper up notices -- sno_globaloper.so
- * /whois notifications (snomask +W) -- sno_whois.so
+ * Channel mode +-A (admin only) -- chm_adminonly.la
+ * Channel mode +-O (oper only) -- chm_operonly.la
+ * Channel mode +-S (ssl only) -- chm_sslonly.la
+ * Emulates channel mode +-O (oper only) (+-iI $o) -- chm_operonly_compat.la
+ * Emulates channel mode +-R (quiet unreg) (+-q $~a) -- chm_quietunreg_compat.la
+ * Emulates channel mode +-S (ssl only) (+-b $~z) -- chm_sslonly_compat.la
+ * Restrict channel creation to logged in users -- createauthonly.la
+ * Account bans (+b $a[:mask]) -- extb_account.la
+ * Banned from another channel (+b $j:mask) -- extb_canjoin.la
+ * Other-channel bans (+b $c:mask) -- extb_channel.la
+ * Combination extbans -- extb_combi.la
+ * Extended ban (+b $x:mask) -- extb_extgecos.la
+ * Hostmask bans (for combination extbans) -- extb_hostmask.la
+ * Oper bans (+b $o) -- extb_oper.la
+ * Realname (gecos) bans (+b $r:mask) -- extb_realname.la
+ * Server bans (+b $s:mask) -- extb_server.la
+ * SSL bans (+b $z) -- extb_ssl.la
+ * HURT system -- hurt.la
+ * New host mangling (umode +x) -- ip_cloaking_4.0.la
+ * Old host mangling (umode +h) -- ip_cloaking.la
+ * Dynamically extend channel limits -- m_extendchans.la
+ * Find channel forwards -- m_findforwards.la
+ * /identify support -- m_identify.la
+ * Opers cannot be invisible (umode +i) -- no_oper_invis.la
+ * Far connection notices (snomask +F) -- sno_farconnect.la
+ * Remote k/d/x line active notices -- sno_globalkline.la
+ * Remote oper up notices -- sno_globaloper.la
+ * /whois notifications (snomask +W) -- sno_whois.la
+ * Oper-override (modehacking only) -- override.la
+ * Stop services kills -- no_kill_services.la
*/
-#loadmodule "extensions/chm_adminonly.so";
-#loadmodule "extensions/chm_operonly.so";
-#loadmodule "extensions/chm_sslonly.so";
-#loadmodule "extensions/chm_operonly_compat.so";
-#loadmodule "extensions/chm_quietunreg_compat.so";
-#loadmodule "extensions/chm_sslonly_compat.so";
-#loadmodule "extensions/createauthonly.so";
-#loadmodule "extensions/extb_account.so";
-#loadmodule "extensions/extb_canjoin.so";
-#loadmodule "extensions/extb_channel.so";
-#loadmodule "extensions/extb_extgecos.so";
-#loadmodule "extensions/extb_oper.so";
-#loadmodule "extensions/extb_realname.so";
-#loadmodule "extensions/extb_server.so";
-#loadmodule "extensions/extb_ssl.so";
-#loadmodule "extensions/hurt.so";
-#loadmodule "extensions/ip_cloaking_4.0.so";
-#loadmodule "extensions/ip_cloaking.so";
-#loadmodule "extensions/m_findforwards.so";
-#loadmodule "extensions/m_identify.so";
-#loadmodule "extensions/no_oper_invis.so";
-#loadmodule "extensions/sno_farconnect.so";
-#loadmodule "extensions/sno_globalkline.so";
-#loadmodule "extensions/sno_globaloper.so";
-#loadmodule "extensions/sno_whois.so";
-
+#loadmodule "extensions/chm_adminonly.la";
+#loadmodule "extensions/chm_operonly.la";
+#loadmodule "extensions/chm_sslonly.la";
+#loadmodule "extensions/chm_operonly_compat.la";
+#loadmodule "extensions/chm_quietunreg_compat.la";
+#loadmodule "extensions/chm_sslonly_compat.la";
+#loadmodule "extensions/createauthonly.la";
+#loadmodule "extensions/extb_account.la";
+#loadmodule "extensions/extb_canjoin.la";
+#loadmodule "extensions/extb_channel.la";
+#loadmodule "extensions/extb_combi.la";
+#loadmodule "extensions/extb_extgecos.la";
+#loadmodule "extensions/extb_hostmask.la";
+#loadmodule "extensions/extb_oper.la";
+#loadmodule "extensions/extb_realname.la";
+#loadmodule "extensions/extb_server.la";
+#loadmodule "extensions/extb_ssl.la";
+#loadmodule "extensions/hurt.la";
+#loadmodule "extensions/ip_cloaking_4.0.la";
+#loadmodule "extensions/ip_cloaking.la";
+#loadmodule "extensions/m_extendchans.la";
+#loadmodule "extensions/m_findforwards.la";
+#loadmodule "extensions/m_identify.la";
+#loadmodule "extensions/no_oper_invis.la";
+#loadmodule "extensions/sno_farconnect.la";
+#loadmodule "extensions/sno_globalkline.la";
+#loadmodule "extensions/sno_globaloper.la";
+#loadmodule "extensions/sno_whois.la";
+#loadmodule "extensions/override.la";
+#loadmodule "extensions/no_kill_services.la";
+
/* serverinfo {}: Contains information about the server. (OLD M:) */
serverinfo {
/* name: the name of our server */
* is on. Shown in the 005 reply and used with serverhiding.
*/
network_name = "MyNet";
- network_desc = "This is My Network";
/* hub: allow this server to act as a hub and have multiple servers
* connected to it.
/* vhost: the IP to bind to when we connect outward to ipv4 servers.
* This should be an ipv4 IP only.
*/
- #vhost = "192.169.0.1";
+ #vhost = "192.0.2.6";
/* vhost6: the IP to bind to when we connect outward to ipv6 servers.
* This should be an ipv6 IP only.
*/
- #vhost6 = "3ffe:80e8:546::2";
+ #vhost6 = "2001:db7:2::6";
/* ssl_private_key: our ssl private key */
- ssl_private_key = "etc/test.key";
+ ssl_private_key = "etc/ssl.key";
/* ssl_cert: certificate for our ssl server */
- ssl_cert = "etc/test.cert";
+ ssl_cert = "etc/ssl.pem";
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
ssl_dh_params = "etc/dh.pem";
+ /* ssl_cipher_list: A list of ciphers, dependent on your TLS backend */
+ #ssl_cipher_list = "EECDH+HIGH:EDH+HIGH:HIGH:!aNULL";
+
/* ssld_count: number of ssld processes you want to start, if you
* have a really busy server, using N-1 where N is the number of
* cpu/cpu cores you have might be useful. A number greater than one
* /quote set maxclients <limit>
*/
default_max_clients = 1024;
+
+ /* nicklen: enforced nickname length (for this server only; must not
+ * be longer than the maximum length set while building).
+ */
+ nicklen = 30;
};
/* admin {}: contains admin information about the server. (OLD A:) */
*/
ping_time = 2 minutes;
- /* number per ident: the number of users per user@host networkwide
- * allowed to connect. Unidented connections are classified as
- * the same ident.
- */
- number_per_ident = 2;
+ /* number per ident: the number of users per user@host networkwide
+ * allowed to connect. Unidented connections are classified as
+ * the same ident.
+ */
+ number_per_ident = 2;
/* number per ip: the number of local users per host allowed */
number_per_ip = 3;
- /* number per ip global: the number of network wide connections
- * per host allowed for a user, including connections to the
- * local server.
- */
- number_per_ip_global = 5;
+ /* number per ip global: the number of network wide connections
+ * per host allowed for a user, including connections to the
+ * local server.
+ */
+ number_per_ip_global = 5;
/* cidr_ipv4_bitlen: Limits numbers of connections from a subnet size
*/
*/
connectfreq = 5 minutes;
- /* max number: the amount of servers to autoconnect to */
+ /* max number: the amount of servers to autoconnect to. if the number
+ * of servers in the class is or exceeds this, no more servers in the
+ * class are autoconnected. oper initiated connects are unaffected.
+ * this should usually be set to either 0 or 1. (autoconnecting from
+ * hubs to leaves may cause leaves to function as hubs by having
+ * multiple servers connected to them.)
+ */
max_number = 1;
/* sendq: servers need a higher sendq as they are sent more data */
/* listen {}: contain information about the ports ircd listens on (OLD P:) */
listen {
+ /* defer_accept: wait for clients to send IRC handshake data before
+ * accepting them. if you intend to use software which depends on the
+ * server replying first, such as BOPM, you should disable this feature.
+ * otherwise, you probably want to leave it on.
+ */
+ defer_accept = yes;
+
/* port: the specific port to listen on. if no host is specified
* before, it will listen on all available IPs.
*
/* host: set a specific IP/host the ports after the line will listen
* on. This may be ipv4 or ipv6.
*/
- host = "1.2.3.4";
+ host = "192.0.2.6";
port = 7000, 7001;
sslport = 9000, 9001;
- host = "3ffe:1234:a:b:c::d";
- port = 7002;
- sslport = 9002;
+ host = "2001:db8:2::6";
+ port = 7002;
+ sslport = 9002;
};
/* auth {}: allow users to connect to the ircd (OLD I:) */
* prepending a 0 if it starts with a colon) and can also use CIDR
* masks.
*/
- user = "*@172.16.0.0/12";
- user = "*test@123D:B567:*";
+ user = "*@198.51.100.0/24";
+ user = "*test@2001:db8:1:*";
+
+ /* auth_user: This allows specifying a username:password instead of
+ * just a password in PASS, so that a fixed user@host is not
+ * necessary for a specific auth{} block.
+ */
+ #auth_user = "SomeUser";
/* password: an optional password that is required to use this block.
* By default this is not encrypted, specify the flag "encrypted" in
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
*/
- spoof = "I.still.hate.packets";
+ spoof = "I.still.hate.packets";
/* Possible flags in auth:
*
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
* resv_exempt | exempt this user from resvs
- * flood_exempt | exempt this user from flood limits
- * USE WITH CAUTION.
+ * flood_exempt | exempt this user from flood limits
+ * USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
* need_ssl | require SSL/TLS for user in this class
* need_sasl | require SASL id for user in this class
+ * extend_chans | allow this user to join more channels than normal
*/
flags = kline_exempt, exceed_limit;
* not have to obey the redirection, the ircd just suggests to them
* an alternative server.
*/
- redirserv = "irc.some.domain";
+ redirserv = "irc.example.net";
redirport = 6667;
- user = "*.some.domain";
+ user = "*.example.com";
/* class: a class is required even though it is not used */
class = "users";
auth {
user = "*@*";
class = "users";
-
- flags = need_ident;
};
/* privset{}: defines operator privilege sets. */
* oper:hidden: hides the oper from /stats p
* oper:remoteban: allows remote kline etc
* oper:mass_notice: allows sending wallops and mass notices
+ * oper:grant: allows using the GRANT command
*/
privs = oper:local_kill, oper:operwall;
};
privset "admin" {
extends = "global_op";
- privs = oper:admin, oper:die, oper:rehash, oper:spy;
+ privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant;
};
/* operator {}: defines ircd operators. (OLD O:) */
/* user: the user@host required for this operator. CIDR *is*
* supported now. auth{} spoofs work here, other spoofs do not.
- * multiple user="" lines are supported.
+ * multiple user="" lines are supported.
*/
user = "*god@*";
user = "*@127.0.0.1";
*
* encrypted: the password above is encrypted [DEFAULT]
* need_ssl: must be using SSL/TLS to oper up
- */
+ */
flags = encrypted;
/* privset: privileges set to grant */
/* host: the host or IP to connect to. If a hostname is used it
* must match the reverse dns of the server.
*/
- host = "192.168.0.1";
+ host = "203.0.113.3";
/* vhost: the host or IP to bind to for this connection. If this
* is not specified, the default vhost (in serverinfo {}) is used.
*/
- #vhost = "192.168.0.50";
+ #vhost = "192.0.2.131";
/* passwords: the passwords we send (OLD C:) and accept (OLD N:).
* The remote server will have these passwords reversed.
send_password = "password";
accept_password = "anotherpassword";
+ /* fingerprint: if specified, the server's client certificate
+ * fingerprint will be checked against the specified fingerprint
+ * below.
+ */
+ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
/* port: the port to connect to this server on */
port = 6666;
flags = compressed, topicburst;
};
-connect "ipv6.some.server" {
+connect "ipv6.lame.server" {
/* Hosts that are IPv6 addresses must be in :: shortened form
* if applicable. Addresses starting with a colon get an extra
* zero prepended, for example: 0::1
*/
- host = "3ffd:dead:beef::1";
- send_password = "password";
- accept_password = "password";
- port = 6666;
+ host = "2001:db8:3::8";
+ send_password = "password";
+ accept_password = "password";
+ port = 6666;
/* aftype: controls whether the connection uses "ipv4" or "ipv6".
* Default is ipv4.
*/
aftype = ipv6;
- class = "server";
+ class = "server";
};
connect "ssl.uplink.com" {
/* Example of ssl server-to-server connection, ssl flag doesn't need
* compressed flag, 'cause it uses own compression
*/
- host = "192.168.0.1";
+ host = "203.0.113.129";
send_password = "password";
accept_password = "anotherpassword";
port = 9999;
* unresv - allow removing xlines
* all - allow oper/server to do all of above.
* locops - allow locops - only used for servers who cluster
- * rehash - allow rehashing
+ * rehash - allow rehashing
* dline - allow setting perm/temp dlines
* tdline - allow setting temp dlines
* undline - allow removing dlines
+ * grant - allow granting operator status
+ * die - allow remote DIE/RESTART
+ * module - allow remote module commands
* none - disallow everything
*/
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
exempt {
- ip = "192.168.0.0/16";
+ ip = "192.0.2.0/24";
/* these may be stacked */
ip = "127.0.0.1";
- ip = "10.0.0.0/8";
};
/* The channel block contains options pertaining to channels */
use_except = yes;
/* forward: Enable/disable channel mode +f, a channel to forward
- * users to if they can't join because of +i etc.
+ * users to if they can't join because of +i etc. Also enables ban
+ * forwarding, <mask>$<channel>.
*/
use_forward = yes;
/* max chans: The maximum number of channels a user can join/be on. */
max_chans_per_user = 15;
- /* max bans: maximum number of +b/e/I/q modes in a channel */
- max_bans = 25;
+ /* max chans (large): The extended maximum number of channels a user can join. */
+ max_chans_per_user_large = 60;
+
+ /* max bans: maximum number of +b/e/I/q modes in a channel */
+ max_bans = 100;
- /* max bans: maximum number of +b/e/I/q modes in a +L channel */
- max_bans_large = 500;
+ /* max bans: maximum number of +b/e/I/q modes in a +L channel */
+ max_bans_large = 500;
- /* splitcode: split users, split servers and either no join on split
+ /* splitcode: split users, split servers and either no join on split
* or no create on split must be enabled for split checking.
* splitmode will be entered on either split users or split servers
* dropping below the limit.
* mode with a different key, kick all local users.
*
* note: this does not take +r, +b, +e and +I into account.
- *
- * warning: if there are any TS5 servers on the network, this
- * will cause ban desyncs if they send such an SJOIN and the
- * splitriders added any bans (our side will lose them, the TS5
- * side will accept them). we will send a notice to the channel
- * if this happens. most services do not send such SJOINs but
- * ratbox-services does.
*/
kick_on_split_riding = no;
* or non-ASCII).
*/
only_ascii_channels = no;
-
+
/* resv_forcepart: force any local users to part a channel
* when a RESV is issued.
*/
resv_forcepart = yes;
+
+ /* channel target change: restrict how many channels users can
+ * message per unit of time. IRC operators, channel operators and
+ * voiced users are exempt.
+ */
+ channel_target_change = yes;
+
+ /* disable local channels: if yes, then local channels will not be
+ * supported.
+ */
+ disable_local_channels = no;
+
+ /* autochanmodes: the channel modes that should be automatically set
+ * when a channel is created.
+ */
+ autochanmodes = "+nt";
+
+ /* displayed_usercount: the minimum amount of users on a channel before it
+ * is displayed in LIST. this parameter can be overridden using ELIST parameters,
+ * such as LIST >0.
+ */
+ displayed_usercount = 3;
};
/* hidden: hide this server from a /links output on servers with
* flatten_links enabled. this allows hub servers to be hidden etc.
*/
- hidden = no;
+ hidden = no;
/* disable hidden: prevent servers hiding themselves from a
* /links ouput.
* They are used in pairs of one host/rejection reason.
*
* These settings should be adequate for most networks, and are (presently)
- * required for use on AthemeNet.
+ * required for use on StaticBox.
*
* Word to the wise: Do not use blacklists like SPEWS for blocking IRC
* connections.
* ${nick} - the user's nickname
* ${network-name} - the name of the network
*
- * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
- * contacted, via email, at admins@2mbit.com before using these BLs.
- * See <http://www.ahbl.org/services.php> for more information.
+ * As of charybdis 3.4, a type parameter is supported, which specifies the
+ * address families the blacklist supports. IPv4 and IPv6 are supported.
+ * IPv4 is currently the default as few blacklists support IPv6 operation
+ * as of this writing.
+ *
+ * As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
+ * is considered a match. If included, a comma-separated list of *quoted*
+ * strings is allowed to match queries. They may be of the format "0" to "255"
+ * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
+ * an A record. The blacklist is only applied if it matches anything in the
+ * list. You may freely mix full IP's and final octets.
+ *
+ * Consult your blacklist provider for the meaning of these parameters; they
+ * are usually used to denote different ban types.
*/
blacklist {
- host = "dnsbl.dronebl.org";
- reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
-
-# host = "ircbl.ahbl.org";
-# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
-#
-# host = "tor.ahbl.org";
-# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
+ host = "rbl.efnetrbl.org";
+ type = ipv4;
+ reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
+
+ /* Example of a blacklist that supports both IPv4 and IPv6 and using matches */
+# host = "foobl.blacklist.invalid";
+# matches = "4", "6", "127.0.0.10";
+# type = ipv4, ipv6;
+# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
};
/*
* If disabled, local opers can see them.
* Dynamic spoofs (e.g. set by services) are unaffected by this;
* any oper (local and remote) can see the real ip.
- * Warning: for whowas, this is checked when the client exits,
- * not when the IP is shown.
*/
hide_spoof_ips = yes;
*/
servicestring = "is a Network Service";
+ /*
+ * Nick of the network's SASL agent. Used to check whether services are here,
+ * SASL credentials are only sent to its server. Needs to be a service.
+ *
+ * Defaults to SaslServ if unspecified.
+ */
+ sasl_service = "SaslServ";
+
/* disable fake channels: disable local users joining fake versions
* of channels, eg #foo^B^B. Disables bold, mirc colour, reverse,
* underline and hard space. (ASCII 2, 3, 22, 31, 160 respectively).
*/
disable_fake_channels = no;
- /* tkline_expire_notices: give a notice to opers when a tkline
- * expires
- */
- tkline_expire_notices = no;
+ /* tkline_expire_notices: give a notice to opers when a tkline
+ * expires
+ */
+ tkline_expire_notices = no;
/* floodcount: the default value of floodcount that is configurable
* via /quote set floodcount. This is the amount of lines a user
* may send to any other user/channel in one second.
*/
- default_floodcount = 10;
+ default_floodcount = 10;
/* failed oper notice: send a notice to all opers on the server when
* someone tries to OPER and uses the wrong password, host or ident.
*/
dots_in_ident=2;
- /* min nonwildcard: the minimum non wildcard characters in k/d/g lines
+ /* min nonwildcard: the minimum non wildcard characters in k/d/g lines
* placed via the server. klines hand placed are exempt from limits.
* wildcard chars: '.' '*' '?' '@'
*/
*/
min_nonwildcard_simple = 3;
- /* max accept: maximum allowed /accept's for +g usermode */
- max_accept = 20;
+ /* max accept: maximum allowed /accept's for +g usermode */
+ max_accept = 20;
/* max monitor: the maximum amount of nicknames a client may have in
* their monitor (server-side notify) list.
max_nick_time = 20 seconds;
max_nick_changes = 5;
- /* anti spam time: the minimum time a user must be connected before
+ /* anti spam time: the minimum time a user must be connected before
* custom quit messages are allowed.
*/
- anti_spam_exit_message_time = 5 minutes;
+ anti_spam_exit_message_time = 5 minutes;
/* ts delta: the time delta allowed between server clocks before
* a warning is given, or before the link is dropped. all servers
ts_warn_delta = 30 seconds;
ts_max_delta = 5 minutes;
- /* client exit: prepend a users quit message with "Client exit: " */
+ /* client exit: prepend a user's quit message with "Quit: " */
client_exit = yes;
/* collision fnc: change user's nick to their UID instead of
*/
collision_fnc = yes;
+ /* resv fnc: change a user's nick to a nick they have recently used
+ * (or their UID, if no such nick can be found) when a resv matching
+ * them is set by services. Only enable this if all servers on the
+ * network allow remote nicks to start with a digit.
+ */
+ resv_fnc = yes;
+
/* global snotices: send out certain snotices (most +b, +f, +y,
* some +s) to other servers via ENCAP SNOTE. Received SNOTEs are
* displayed unconditionally.
*/
warn_no_nline = yes;
+ /* use propagated bans: KLINE, XLINE and RESV set fully propagated bans.
+ * That means the bans are part of the netburst and restarted/split
+ * servers will get them, but they will not apply to 3.2 and older
+ * servers at all.
+ */
+ use_propagated_bans = yes;
+
/* stats e disabled: disable stats e. useful if server ips are
* exempted and you dont want them listing on irc.
*/
*/
stats_k_oper_only=masked;
- /* map oper only: make /map oper only */
- map_oper_only = no;
+ /* map oper only: make /map oper only */
+ map_oper_only = no;
/* operspy admin only: make operspy notices to +Z admin only */
operspy_admin_only = no;
*/
connect_timeout = 30 seconds;
+ /* ident timeout: Amount of time (in seconds) that the IRCd will
+ * wait for a user to respond to an ident request.
+ */
+ default_ident_timeout = 5;
+
/* disable auth: disables identd checking */
disable_auth = no;
*/
max_targets = 4;
- /* client flood: maximum number of lines in a clients queue before
- * they are dropped for flooding.
+ /* use_whois_actually: send clients requesting a whois a numeric
+ * giving the real IP of non-spoofed clients to prevent DNS abuse.
*/
- client_flood = 20;
-
- /* use_whois_actually: send clients requesting a whois a numeric
- * giving the real IP of non-spoofed clients to prevent DNS abuse.
- */
- use_whois_actually = yes;
+ use_whois_actually = yes;
/* usermodes configurable: a list of usermodes for the options below
*
* provided they have umode +s set */
oper_snomask = "+s";
- /* use egd: if your system does not have *random devices yet you
- * want to use OpenSSL and encrypted links, enable this. Beware -
- * EGD is *very* CPU intensive when gathering data for its pool
- */
- #use_egd = yes;
-
- /* egdpool path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
- * which automatically finds the path.
- */
- #egdpool_path = "/var/run/egd-pool";
-
-
/* compression level: level of compression for compressed links between
* servers.
*
*/
#compression_level = 6;
- /* burst_away: This enables bursting away messages to servers.
- * With this disabled, we will only propogate AWAY messages
- * as users send them, but never burst them. Be warned though
- * enabling this could increase the size of a burst significantly
- * for a large network, like EFnet.
- */
- burst_away = yes;
+ /* burst_away: This enables bursting away messages to servers.
+ * With this disabled, we will only propogate AWAY messages
+ * as users send them, but never burst them. Be warned though
+ * enabling this could increase the size of a burst significantly
+ * for a large network, like EFnet.
+ */
+ burst_away = yes;
/* nick delay: This locks nicks of split clients for the given time
* or until a remote client uses the nick. This significantly
/* throttle_count: Number of connections within throttle_duration that it takes
* for throttling to take effect */
throttle_count = 4;
+
+ /* client flood_max_lines: maximum number of lines in a clients queue before
+ * they are dropped for flooding.
+ */
+ client_flood_max_lines = 20;
+
+ /* Flood control settings. DO NOT CHANGE THESE without extensive discussion
+ * and testing by someone who knows exactly what they do.
+ *
+ * These settings replicate charybdis-3.3 behaviour.
+ */
+ client_flood_burst_rate = 40;
+ client_flood_burst_max = 5;
+ client_flood_message_time = 1;
+ client_flood_message_num = 2;
+
+ /* max_ratelimit_tokens: the maximum number of ratelimit tokens that one
+ * user can accumulate. This attempts to limit the amount of outbound
+ * bandwidth one user can consume. Do not change unless you know what
+ * you're doing.
+ */
+ max_ratelimit_tokens = 30;
+
+ /* away_interval: the minimum interval between AWAY commands. One
+ * additional AWAY command is allowed, and only marking as away
+ * counts.
+ */
+ away_interval = 30;
+
+ /* certfp_method: the method that should be used for computing certificate fingerprints.
+ * Acceptable options are sha1, sha256 and sha512. Networks running versions of charybdis
+ * prior to charybdis 3.5 MUST use sha1 for certfp_method.
+ */
+ certfp_method = sha1;
};
modules {
path = "/usr/local/ircd/modules/autoload";
/* module: the name of a module to load on startup/rehash */
- #module = "some_module.so";
+ #module = "some_module.la";
};