* that matches a user will be used. So place spoofs first, then specials,
* then general access, then restricted.
*
+ * privset {} blocks MUST be specified before anything that uses them. That
+ * means they must be defined before operator {}.
+ *
* Both shell style (#) and C style comments are supported.
*
* Files may be included by either:
* Charybdis contains several extensions that are not enabled by default.
* To use them, uncomment the lines below.
*
- * Restrict channel creation to logged in users -- createauthonly.so
- * Account bans (+b $a[:mask]) -- extb_account.so
- * Banned from another channel (+b $j:mask) -- extb_canjoin.so
- * Other-channel bans (+b $c:mask) -- extb_channel.so
- * Extended ban (+b $x:mask) -- extb_extgecos.so
- * Oper bans (+b $o) -- extb_oper.so
- * Realname (gecos) bans (+b $r:mask) -- extb_realname.so
- * Server bans (+b $s:mask) -- extb_server.so
- * HURT system -- hurt.so
- * Host mangling (umode +h) -- ip_cloaking.so
- * Find channel forwards -- m_findforwards.so
- * /identify support -- m_identify.so
- * Opers cannot be invisible (umode +i) -- no_oper_invis.so
- * Far connection notices (snomask +F) -- sno_farconnect.so
- * Remote k/d/g/x line active notices -- sno_globalkline.so
- * Remote oper up notices -- sno_globaloper.so
- * /whois notifications (snomask +W) -- sno_whois.so
+ * Channel mode +-A (admin only) -- chm_adminonly.la
+ * Channel mode +-O (oper only) -- chm_operonly.la
+ * Channel mode +-S (ssl only) -- chm_sslonly.la
+ * Emulates channel mode +-O (oper only) (+-iI $o) -- chm_operonly_compat.la
+ * Emulates channel mode +-R (quiet unreg) (+-q $~a) -- chm_quietunreg_compat.la
+ * Emulates channel mode +-S (ssl only) (+-b $~z) -- chm_sslonly_compat.la
+ * Channel mode +-M (disallow KICK on IRC ops) -- chm_operpeace.la
+ * Restrict channel creation to logged in users -- createauthonly.la
+ * Account bans (+b $a[:mask]) -- extb_account.la
+ * Banned from another channel (+b $j:mask) -- extb_canjoin.la
+ * Other-channel bans (+b $c:mask) -- extb_channel.la
+ * Combination extbans -- extb_combi.la
+ * Extended ban (+b $x:mask) -- extb_extgecos.la
+ * Hostmask bans (for combination extbans) -- extb_hostmask.la
+ * Oper bans (+b $o) -- extb_oper.la
+ * Realname (gecos) bans (+b $r:mask) -- extb_realname.la
+ * Server bans (+b $s:mask) -- extb_server.la
+ * SSL bans (+b $z) -- extb_ssl.la
+ * Helpops system (umode +H) -- helpops.la
+ * HURT system -- hurt.la
+ * New host mangling (umode +x) -- ip_cloaking_4.0.la
+ * Old host mangling (umode +h) -- ip_cloaking.la
+ * Dynamically extend channel limits -- m_extendchans.la
+ * Find channel forwards -- m_findforwards.la
+ * /identify support -- m_identify.la
+ * Opers cannot be invisible (umode +i) -- no_oper_invis.la
+ * Far connection notices (snomask +F) -- sno_farconnect.la
+ * Remote k/d/x line active notices -- sno_globalkline.la
+ * Remote oper up notices -- sno_globaloper.la
+ * Global nick-change notices -- sno_globalnickchange.la
+ * /whois notifications (snomask +W) -- sno_whois.la
+ * Oper-override (modehacking only) -- override.la
+ * Stop services kills -- no_kill_services.la
*/
-#loadmodule "extensions/createauthonly.so";
-#loadmodule "extensions/extb_account.so";
-#loadmodule "extensions/extb_canjoin.so";
-#loadmodule "extensions/extb_channel.so";
-#loadmodule "extensions/extb_extgecos.so";
-#loadmodule "extensions/extb_oper.so";
-#loadmodule "extensions/extb_realname.so";
-#loadmodule "extensions/extb_server.so";
-#loadmodule "extensions/hurt.so";
-#loadmodule "extensions/ip_cloaking.so";
-#loadmodule "extensions/m_findforwards.so";
-#loadmodule "extensions/m_identify.so";
-#loadmodule "extensions/no_oper_invis.so";
-#loadmodule "extensions/sno_farconnect.so";
-#loadmodule "extensions/sno_globalkline.so";
-#loadmodule "extensions/sno_globaloper.so";
-#loadmodule "extensions/sno_whois.so";
-
+#loadmodule "extensions/chm_adminonly.la";
+#loadmodule "extensions/chm_operonly.la";
+#loadmodule "extensions/chm_sslonly.la";
+#loadmodule "extensions/chm_operonly_compat.la";
+#loadmodule "extensions/chm_quietunreg_compat.la";
+#loadmodule "extensions/chm_sslonly_compat.la";
+#loadmodule "extensions/chm_operpeace.la";
+#loadmodule "extensions/createauthonly.la";
+#loadmodule "extensions/extb_account.la";
+#loadmodule "extensions/extb_canjoin.la";
+#loadmodule "extensions/extb_channel.la";
+#loadmodule "extensions/extb_combi.la";
+#loadmodule "extensions/extb_extgecos.la";
+#loadmodule "extensions/extb_hostmask.la";
+#loadmodule "extensions/extb_oper.la";
+#loadmodule "extensions/extb_realname.la";
+#loadmodule "extensions/extb_server.la";
+#loadmodule "extensions/extb_ssl.la";
+#loadmodule "extensions/helpops.la";
+#loadmodule "extensions/hurt.la";
+#loadmodule "extensions/ip_cloaking_4.0.la";
+#loadmodule "extensions/ip_cloaking.la";
+#loadmodule "extensions/m_extendchans.la";
+#loadmodule "extensions/m_findforwards.la";
+#loadmodule "extensions/m_identify.la";
+#loadmodule "extensions/no_oper_invis.la";
+#loadmodule "extensions/sno_farconnect.la";
+#loadmodule "extensions/sno_globalkline.la";
+#loadmodule "extensions/sno_globalnickchange.la";
+#loadmodule "extensions/sno_globaloper.la";
+#loadmodule "extensions/sno_whois.la";
+#loadmodule "extensions/override.la";
+#loadmodule "extensions/no_kill_services.la";
+
/* serverinfo {}: Contains information about the server. (OLD M:) */
serverinfo {
/* name: the name of our server */
* is on. Shown in the 005 reply and used with serverhiding.
*/
network_name = "MyNet";
- network_desc = "This is My Network";
/* hub: allow this server to act as a hub and have multiple servers
* connected to it.
/* vhost: the IP to bind to when we connect outward to ipv4 servers.
* This should be an ipv4 IP only.
*/
- #vhost = "192.169.0.1";
+ #vhost = "192.0.2.6";
/* vhost6: the IP to bind to when we connect outward to ipv6 servers.
* This should be an ipv6 IP only.
*/
- #vhost6 = "3ffe:80e8:546::2";
+ #vhost6 = "2001:db7:2::6";
+
+ /* ssl_private_key: our ssl private key */
+ ssl_private_key = "etc/ssl.key";
+
+ /* ssl_cert: certificate for our ssl server */
+ ssl_cert = "etc/ssl.pem";
+
+ /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
+ ssl_dh_params = "etc/dh.pem";
+
+ /* ssl_cipher_list: A list of ciphers, dependent on your TLS backend */
+ #ssl_cipher_list = "EECDH+HIGH:EDH+HIGH:HIGH:!aNULL";
+
+ /* ssld_count: number of ssld processes you want to start, if you
+ * have a really busy server, using N-1 where N is the number of
+ * cpu/cpu cores you have might be useful. A number greater than one
+ * can also be useful in case of bugs in ssld and because ssld needs
+ * two file descriptors per SSL connection.
+ */
+ ssld_count = 1;
- /* default max clients: the default maximum number of clients\r
- * allowed to connect. This can be changed once ircd has started by\r
- * issuing:\r
- * /quote set maxclients <limit>\r
+ /* default max clients: the default maximum number of clients
+ * allowed to connect. This can be changed once ircd has started by
+ * issuing:
+ * /quote set maxclients <limit>
*/
default_max_clients = 1024;
+
+ /* nicklen: enforced nickname length (for this server only; must not
+ * be longer than the maximum length set while building).
+ */
+ nicklen = 30;
};
/* admin {}: contains admin information about the server. (OLD A:) */
* - operlog: /oper usage
* - foperlog: failed /oper usage
* - serverlog: server connects/disconnects
- * - glinelog: glines
* - klinelog: klines, etc
* - killlog: kills
* - operspylog: operspy usage
fname_operlog = "logs/operlog";
#fname_foperlog = "logs/foperlog";
fname_serverlog = "logs/serverlog";
- fname_glinelog = "logs/glinelog";
#fname_klinelog = "logs/klinelog";
fname_killlog = "logs/killlog";
fname_operspylog = "logs/operspylog";
*/
ping_time = 2 minutes;
- /* number per ident: the number of users per user@host networkwide
- * allowed to connect. Unidented connections are classified as
- * the same ident.
- */
- number_per_ident = 2;
+ /* number per ident: the number of users per user@host networkwide
+ * allowed to connect. Unidented connections are classified as
+ * the same ident.
+ */
+ number_per_ident = 2;
/* number per ip: the number of local users per host allowed */
number_per_ip = 3;
- /* number per ip global: the number of network wide connections
- * per host allowed for a user, including connections to the
- * local server.
- */
- number_per_ip_global = 5;
+ /* number per ip global: the number of network wide connections
+ * per host allowed for a user, including connections to the
+ * local server.
+ */
+ number_per_ip_global = 5;
+
+ /* cidr_ipv4_bitlen: Limits numbers of connections from a subnet size
+ */
+ cidr_ipv4_bitlen = 24;
- /* cidr_bitlen: Limits numbers of connections from a subnet size
+ /* cidr_ipv6_bitlen: Limits numbers of connections from a subnet size
* the following example makes the subnet /64 this is useful
* for IPv6 connections in particular
- * Also note that the way charybdis is written if you have
- * compiled support for IPv6, IPv4 cidr bitlens need to be modified
- * Basically to get the approriate length add 96 to the IPv4 length
- * For example for a /24 do 96+24 = 120
- *
*/
- cidr_bitlen = 64;
+ cidr_ipv6_bitlen = 64;
/* number_per_cidr: Number of connections to allow from a subnet of the
- * size given in cidr_bitlen. 4 seems to be a good default to me.
+ * size given in cidr_ipv4_bitlen/cidr_ipv6_bitlen.
+ * 4 seems to be a good default to me.
*/
number_per_cidr = 4;
*/
connectfreq = 5 minutes;
- /* max number: the amount of servers to autoconnect to */
+ /* max number: the amount of servers to autoconnect to. if the number
+ * of servers in the class is or exceeds this, no more servers in the
+ * class are autoconnected. oper initiated connects are unaffected.
+ * this should usually be set to either 0 or 1. (autoconnecting from
+ * hubs to leaves may cause leaves to function as hubs by having
+ * multiple servers connected to them.)
+ */
max_number = 1;
/* sendq: servers need a higher sendq as they are sent more data */
/* listen {}: contain information about the ports ircd listens on (OLD P:) */
listen {
+ /* defer_accept: wait for clients to send IRC handshake data before
+ * accepting them. if you intend to use software which depends on the
+ * server replying first, such as BOPM, you should disable this feature.
+ * otherwise, you probably want to leave it on.
+ */
+ defer_accept = yes;
+
/* port: the specific port to listen on. if no host is specified
* before, it will listen on all available IPs.
*
+ * sslport: the specific port to listen ssl connections on. if no
+ * host is specified before, it will listen on all available IPs.
+ *
* ports are seperated via a comma, a range may be specified using ".."
*/
/* port: listen on all available IPs, ports 5000 and 6665 to 6669 */
port = 5000, 6665 .. 6669;
+
+ /* sslport: listen for ssl connections on all available IPs, port 9999 */
+ sslport = 9999;
/* host: set a specific IP/host the ports after the line will listen
* on. This may be ipv4 or ipv6.
*/
- host = "1.2.3.4";
+ host = "192.0.2.6";
port = 7000, 7001;
+ sslport = 9000, 9001;
- host = "3ffe:1234:a:b:c::d";
- port = 7002;
+ host = "2001:db8:2::6";
+ port = 7002;
+ sslport = 9002;
};
/* auth {}: allow users to connect to the ircd (OLD I:) */
* prepending a 0 if it starts with a colon) and can also use CIDR
* masks.
*/
- user = "*@172.16.0.0/12";
- user = "*test@123D:B567:*";
+ user = "*@198.51.100.0/24";
+ user = "*test@2001:db8:1:*";
+
+ /* auth_user: This allows specifying a username:password instead of
+ * just a password in PASS, so that a fixed user@host is not
+ * necessary for a specific auth{} block.
+ */
+ #auth_user = "SomeUser";
/* password: an optional password that is required to use this block.
* By default this is not encrypted, specify the flag "encrypted" in
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
*/
- spoof = "I.still.hate.packets";
+ spoof = "I.still.hate.packets";
/* Possible flags in auth:
*
* exceed_limit (old > flag) | allow user to exceed class user limits
* kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
* dnsbl_exempt | exempt this user from dnsbls
- * gline_exempt (old _ flag) | exempt this user from glines
* spambot_exempt | exempt this user from spambot checks
* shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
* resv_exempt | exempt this user from resvs
- * flood_exempt | exempt this user from flood limits
- * USE WITH CAUTION.
+ * flood_exempt | exempt this user from flood limits
+ * USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
+ * need_ssl | require SSL/TLS for user in this class
* need_sasl | require SASL id for user in this class
+ * extend_chans | allow this user to join more channels than normal
*/
flags = kline_exempt, exceed_limit;
* not have to obey the redirection, the ircd just suggests to them
* an alternative server.
*/
- redirserv = "irc.some.domain";
+ redirserv = "irc.example.net";
redirport = 6667;
- user = "*.some.domain";
+ user = "*.example.com";
/* class: a class is required even though it is not used */
class = "users";
auth {
user = "*@*";
class = "users";
-
- flags = need_ident;
};
-/* operator {}: defines ircd operators. (OLD O:)
- * charybdis no longer supports local operators, privileges are
- * controlled via flags.
- */
+/* privset{}: defines operator privilege sets. */
+privset "local_op" {
+ /* privs: controls the activities and commands an oper is
+ * allowed to do on the server
+ *
+ * Available options:
+ *
+ * oper:local_kill: allows local users to be /KILL'd
+ * oper:global_kill: allows local and remote users to be /KILL'd
+ * oper:routing: allows remote SQUIT and CONNECT
+ * oper:kline: allows KLINE and DLINE
+ * oper:unkline: allows UNKLINE and UNDLINE
+ * snomask:nick_changes: allows oper to see nickchanges via snomask +n
+ * oper:rehash: allows oper to REHASH config
+ * oper:die: allows DIE and RESTART
+ * oper:admin: gives admin privileges. admins
+ * may (un)load modules and see various
+ * additional information.
+ * oper:hidden_admin: gives admin privileges except
+ * will not have the admin lines in
+ * whois.
+ * oper:xline: allows use of /quote xline/unxline
+ * oper:resv: allows /quote resv/unresv and cmode +LP
+ * oper:operwall: allows the oper to send/receive operwalls
+ * oper:spy: allows 'operspy' features to see through +s
+ * channels etc. see /quote help operspy
+ * oper:hidden: hides the oper from /stats p
+ * oper:remoteban: allows remote kline etc
+ * oper:mass_notice: allows sending wallops and mass notices
+ * oper:grant: allows using the GRANT command
+ */
+ privs = oper:local_kill, oper:operwall;
+};
+
+privset "server_bot" {
+ /* extends: a privset to inherit in this privset */
+ extends = "local_op";
+ privs = oper:kline, oper:remoteban, snomask:nick_changes;
+};
+
+privset "global_op" {
+ extends = "local_op";
+ privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
+ oper:resv, oper:mass_notice, oper:remoteban;
+};
+
+privset "admin" {
+ extends = "global_op";
+ privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant;
+};
+
+/* operator {}: defines ircd operators. (OLD O:) */
operator "god" {
/* name: the name of the oper must go above */
/* user: the user@host required for this operator. CIDR *is*
* supported now. auth{} spoofs work here, other spoofs do not.
- * multiple user="" lines are supported.
+ * multiple user="" lines are supported.
*/
user = "*god@*";
user = "*@127.0.0.1";
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
+ /* fingerprint: if specified, the oper's client certificate
+ * fingerprint will be checked against the specified fingerprint
+ * below.
+ */
+ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
/* umodes: the specific umodes this oper gets when they oper.
* If this is specified an oper will not be given oper_umodes
* These are described above oper_only_umodes in general {};
*/
snomask = "+Zbfkrsuy";
- /* privileges: controls the activities and commands an oper is
- * allowed to do on the server. You may prefix an option with ~ to
- * disable it, ie ~operwall
+ /* flags: misc options for the operator. You may prefix an option
+ * with ~ to disable it, e.g. ~encrypted.
*
- * Default flags are operwall, remoteban and encrypted.
+ * Default flags are encrypted.
*
* Available options:
*
* encrypted: the password above is encrypted [DEFAULT]
- * local_kill: allows local users to be /KILL'd
- * global_kill: allows local and remote users to be
- * /KILL'd (OLD 'O' flag)
- * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
- * kline: allows KLINE and DLINE (OLD 'K' flag)
- * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
- * gline: allows GLINE (OLD 'G' flag)
- * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
- * via snomask +n
- * rehash: allows oper to REHASH config (OLD 'H' flag)
- * die: allows DIE and RESTART (OLD 'D' flag)
- * admin: gives admin privileges. admins
- * may (un)load modules and see the
- * real IPs of servers.
- * hidden_admin: gives admin privileges except
- * will not have the admin lines in
- * stats p and whois.
- * xline: allows use of /quote xline/unxline
- * resv: allows /quote resv/unresv and cmode +LP [DEFAULT]
- * operwall: allows the oper to send/receive operwalls [DEFAULT]
- * oper_spy: allows 'operspy' features to see through +s
- * channels etc. see /quote help operspy
- * hidden_oper: hides the oper from /stats p (OLD UMODE +p)
- * remoteban: allows remote kline etc [DEFAULT]
- * mass_notice: allows sending wallops and mass notices [DEFAULT]
- */
- flags = global_kill, remote, kline, unkline, gline,
- die, rehash, admin, xline, operwall;
+ * need_ssl: must be using SSL/TLS to oper up
+ */
+ flags = encrypted;
+
+ /* privset: privileges set to grant */
+ privset = "admin";
};
/* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
/* host: the host or IP to connect to. If a hostname is used it
* must match the reverse dns of the server.
*/
- host = "192.168.0.1";
+ host = "203.0.113.3";
/* vhost: the host or IP to bind to for this connection. If this
* is not specified, the default vhost (in serverinfo {}) is used.
*/
- #vhost = "192.168.0.50";
+ #vhost = "192.0.2.131";
/* passwords: the passwords we send (OLD C:) and accept (OLD N:).
* The remote server will have these passwords reversed.
send_password = "password";
accept_password = "anotherpassword";
+ /* fingerprint: if specified, the server's client certificate
+ * fingerprint will be checked against the specified fingerprint
+ * below.
+ */
+ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
/* port: the port to connect to this server on */
port = 6666;
* autoconn - automatically connect to this server
* compressed - compress traffic via ziplinks
* topicburst - burst topics between servers
+ * ssl - ssl/tls encrypted server connections
*/
flags = compressed, topicburst;
};
-connect "ipv6.some.server" {
+connect "ipv6.lame.server" {
/* Hosts that are IPv6 addresses must be in :: shortened form
* if applicable. Addresses starting with a colon get an extra
* zero prepended, for example: 0::1
*/
- host = "3ffd:dead:beef::1";
- send_password = "password";
- accept_password = "password";
- port = 6666;
+ host = "2001:db8:3::8";
+ send_password = "password";
+ accept_password = "password";
+ port = 6666;
/* aftype: controls whether the connection uses "ipv4" or "ipv6".
* Default is ipv4.
*/
aftype = ipv6;
- class = "server";
+ class = "server";
+};
+
+connect "ssl.uplink.com" {
+ /* Example of ssl server-to-server connection, ssl flag doesn't need
+ * compressed flag, 'cause it uses own compression
+ */
+ host = "203.0.113.129";
+ send_password = "password";
+ accept_password = "anotherpassword";
+ port = 9999;
+ hub_mask = "*";
+ class = "server";
+ flags = ssl, topicburst;
};
/* cluster {}; servers that we propagate things to automatically.
* unresv - allow removing xlines
* all - allow oper/server to do all of above.
* locops - allow locops - only used for servers who cluster
- * rehash - allow rehashing
+ * rehash - allow rehashing
+ * dline - allow setting perm/temp dlines
+ * tdline - allow setting temp dlines
+ * undline - allow removing dlines
+ * grant - allow granting operator status
+ * die - allow remote DIE/RESTART
+ * module - allow remote module commands
* none - disallow everything
*/
/* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
exempt {
- ip = "192.168.0.0/16";
+ ip = "192.0.2.0/24";
/* these may be stacked */
ip = "127.0.0.1";
- ip = "10.0.0.0/8";
};
/* The channel block contains options pertaining to channels */
use_except = yes;
/* forward: Enable/disable channel mode +f, a channel to forward
- * users to if they can't join because of +i etc.
+ * users to if they can't join because of +i etc. Also enables ban
+ * forwarding, <mask>$<channel>.
*/
use_forward = yes;
/* max chans: The maximum number of channels a user can join/be on. */
max_chans_per_user = 15;
- /* max bans: maximum number of +b/e/I/q modes in a channel */
- max_bans = 25;
+ /* max chans (large): The extended maximum number of channels a user can join. */
+ max_chans_per_user_large = 60;
+
+ /* max bans: maximum number of +b/e/I/q modes in a channel */
+ max_bans = 100;
- /* max bans: maximum number of +b/e/I/q modes in a +L channel */
- max_bans_large = 500;
+ /* max bans: maximum number of +b/e/I/q modes in a +L channel */
+ max_bans_large = 500;
- /* splitcode: split users, split servers and either no join on split
+ /* splitcode: split users, split servers and either no join on split
* or no create on split must be enabled for split checking.
* splitmode will be entered on either split users or split servers
* dropping below the limit.
* mode with a different key, kick all local users.
*
* note: this does not take +r, +b, +e and +I into account.
- *
- * warning: if there are any TS5 servers on the network, this
- * will cause ban desyncs if they send such an SJOIN and the
- * splitriders added any bans (our side will lose them, the TS5
- * side will accept them). we will send a notice to the channel
- * if this happens. most services do not send such SJOINs but
- * ratbox-services does.
*/
kick_on_split_riding = no;
+
+ /* only ascii channels: disable local users joining channels
+ * containing characters outside the range 33-126 (non-printable
+ * or non-ASCII).
+ */
+ only_ascii_channels = no;
+
+ /* resv_forcepart: force any local users to part a channel
+ * when a RESV is issued.
+ */
+ resv_forcepart = yes;
+
+ /* channel target change: restrict how many channels users can
+ * message per unit of time. IRC operators, channel operators and
+ * voiced users are exempt.
+ */
+ channel_target_change = yes;
+
+ /* disable local channels: if yes, then local channels will not be
+ * supported.
+ */
+ disable_local_channels = no;
+
+ /* autochanmodes: the channel modes that should be automatically set
+ * when a channel is created.
+ */
+ autochanmodes = "+nt";
+
+ /* displayed_usercount: the minimum amount of users on a channel before it
+ * is displayed in LIST. this parameter can be overridden using ELIST parameters,
+ * such as LIST >0.
+ */
+ displayed_usercount = 3;
+
+ /* strip_topic_colors: whether or not color codes in TOPIC should be stripped. */
+ strip_topic_colors = no;
};
/* hidden: hide this server from a /links output on servers with
* flatten_links enabled. this allows hub servers to be hidden etc.
*/
- hidden = no;
+ hidden = no;
/* disable hidden: prevent servers hiding themselves from a
* /links ouput.
/* These are the blacklist settings.
* You can have multiple combinations of host and rejection reasons.
- * They are used in pairs of one host/rejection reason, or multiple hosts/rejection reason.
+ * They are used in pairs of one host/rejection reason.
*
* These settings should be adequate for most networks, and are (presently)
- * required for use on AthemeNet.
+ * required for use on StaticBox.
*
* Word to the wise: Do not use blacklists like SPEWS for blocking IRC
* connections.
* ${nick} - the user's nickname
* ${network-name} - the name of the network
*
- * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
- * contacted, via email, at admins@2mbit.com before using these BLs.
- * See <http://www.ahbl.org/services.php> for more information.
+ * As of charybdis 3.4, a type parameter is supported, which specifies the
+ * address families the blacklist supports. IPv4 and IPv6 are supported.
+ * IPv4 is currently the default as few blacklists support IPv6 operation
+ * as of this writing.
+ *
+ * As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
+ * is considered a match. If included, a comma-separated list of *quoted*
+ * strings is allowed to match queries. They may be of the format "0" to "255"
+ * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
+ * an A record. The blacklist is only applied if it matches anything in the
+ * list. You may freely mix full IP's and final octets.
+ *
+ * Consult your blacklist provider for the meaning of these parameters; they
+ * are usually used to denote different ban types.
*/
blacklist {
- host = "dnsbl.dronebl.org";
- reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
-
-# host = "ircbl.ahbl.org";
-# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
-#
-# host = "tor.ahbl.org";
-# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
+ host = "rbl.efnetrbl.org";
+ type = ipv4;
+ reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
+
+ /* Example of a blacklist that supports both IPv4 and IPv6 and using matches */
+# host = "foobl.blacklist.invalid";
+# matches = "4", "6", "127.0.0.10";
+# type = ipv4, ipv6;
+# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
};
/*
* If disabled, local opers can see them.
* Dynamic spoofs (e.g. set by services) are unaffected by this;
* any oper (local and remote) can see the real ip.
- * Warning: for whowas, this is checked when the client exits,
- * not when the IP is shown.
*/
hide_spoof_ips = yes;
/* default umodes: umodes to set upon connection
* If you have enabled the ip_cloaking extension, and you wish for
- * incoming clients to be set +h upon connection, add +h to the umode
+ * incoming clients to be set +h or +x upon connection, add +h or +x to the umode
* string below.
*/
default_umodes = "+i";
*/
servicestring = "is a Network Service";
+ /*
+ * Nick of the network's SASL agent. Used to check whether services are here,
+ * SASL credentials are only sent to its server. Needs to be a service.
+ *
+ * Defaults to SaslServ if unspecified.
+ */
+ sasl_service = "SaslServ";
+
/* disable fake channels: disable local users joining fake versions
* of channels, eg #foo^B^B. Disables bold, mirc colour, reverse,
* underline and hard space. (ASCII 2, 3, 22, 31, 160 respectively).
*/
disable_fake_channels = no;
- /* tkline_expire_notices: give a notice to opers when a tkline
- * expires
- */
- tkline_expire_notices = no;
+ /* tkline_expire_notices: give a notice to opers when a tkline
+ * expires
+ */
+ tkline_expire_notices = no;
/* floodcount: the default value of floodcount that is configurable
* via /quote set floodcount. This is the amount of lines a user
* may send to any other user/channel in one second.
*/
- default_floodcount = 10;
+ default_floodcount = 10;
/* failed oper notice: send a notice to all opers on the server when
* someone tries to OPER and uses the wrong password, host or ident.
*/
dots_in_ident=2;
- /* min nonwildcard: the minimum non wildcard characters in k/d/g lines
+ /* min nonwildcard: the minimum non wildcard characters in k/d/g lines
* placed via the server. klines hand placed are exempt from limits.
* wildcard chars: '.' '*' '?' '@'
*/
*/
min_nonwildcard_simple = 3;
- /* max accept: maximum allowed /accept's for +g usermode */
- max_accept = 20;
+ /* max accept: maximum allowed /accept's for +g usermode */
+ max_accept = 20;
/* max monitor: the maximum amount of nicknames a client may have in
* their monitor (server-side notify) list.
max_nick_time = 20 seconds;
max_nick_changes = 5;
- /* anti spam time: the minimum time a user must be connected before
+ /* anti spam time: the minimum time a user must be connected before
* custom quit messages are allowed.
*/
- anti_spam_exit_message_time = 5 minutes;
+ anti_spam_exit_message_time = 5 minutes;
/* ts delta: the time delta allowed between server clocks before
* a warning is given, or before the link is dropped. all servers
ts_warn_delta = 30 seconds;
ts_max_delta = 5 minutes;
- /* client exit: prepend a users quit message with "Client exit: " */
+ /* client exit: prepend a user's quit message with "Quit: " */
client_exit = yes;
/* collision fnc: change user's nick to their UID instead of
*/
collision_fnc = yes;
+ /* resv fnc: change a user's nick to a nick they have recently used
+ * (or their UID, if no such nick can be found) when a resv matching
+ * them is set by services. Only enable this if all servers on the
+ * network allow remote nicks to start with a digit.
+ */
+ resv_fnc = yes;
+
/* global snotices: send out certain snotices (most +b, +f, +y,
* some +s) to other servers via ENCAP SNOTE. Received SNOTEs are
* displayed unconditionally.
*/
kline_delay = 0 seconds;
- /* kline reason: show the user the reason why they are k/d/glined
+ /* kline reason: show the user the reason why they are k/dlined
* on exit. may give away who set k/dline when set via tcm.
*/
kline_with_reason = yes;
*/
warn_no_nline = yes;
+ /* use propagated bans: KLINE, XLINE and RESV set fully propagated bans.
+ * That means the bans are part of the netburst and restarted/split
+ * servers will get them, but they will not apply to 3.2 and older
+ * servers at all.
+ */
+ use_propagated_bans = yes;
+
/* stats e disabled: disable stats e. useful if server ips are
* exempted and you dont want them listing on irc.
*/
*/
stats_k_oper_only=masked;
- /* map oper only: make /map oper only */
- map_oper_only = no;
+ /* map oper only: make /map oper only */
+ map_oper_only = no;
/* operspy admin only: make operspy notices to +Z admin only */
operspy_admin_only = no;
*/
connect_timeout = 30 seconds;
+ /* ident timeout: Amount of time (in seconds) that the IRCd will
+ * wait for a user to respond to an ident request.
+ */
+ default_ident_timeout = 5;
+
/* disable auth: disables identd checking */
disable_auth = no;
/* no oper flood: increase flood limits for opers. */
no_oper_flood = yes;
- /* glines: enable glines, network wide temp klines */
- glines = no;
-
- /* gline time: the amount of time a gline will remain before expiring */
- gline_time = 1 day;
-
- /* gline_min_cidr: If using a CIDR gline, the minimum length the
- * mask must be
- */
- gline_min_cidr = 16;
-
/* REMOVE ME. The following line checks you've been reading. */
havent_read_conf = yes;
*/
max_targets = 4;
- /* client flood: maximum number of lines in a clients queue before
- * they are dropped for flooding.
+ /* use_whois_actually: send clients requesting a whois a numeric
+ * giving the real IP of non-spoofed clients to prevent DNS abuse.
*/
- client_flood = 20;
-
- /* use_whois_actually: send clients requesting a whois a numeric
- * giving the real IP of non-spoofed clients to prevent DNS abuse.
- */
- use_whois_actually = yes;
+ use_whois_actually = yes;
/* usermodes configurable: a list of usermodes for the options below
*
* provided they have umode +s set */
oper_snomask = "+s";
- /* servlink path: path to 'servlink' program used by ircd to handle
- * encrypted/compressed server <-> server links.
- *
- * only define if servlink is not in same directory as ircd itself.
- */
- #servlink_path = "/usr/local/ircd/bin/servlink";
-
- /* use egd: if your system does not have *random devices yet you
- * want to use OpenSSL and encrypted links, enable this. Beware -
- * EGD is *very* CPU intensive when gathering data for its pool
- */
- #use_egd = yes;
-
- /* egdpool path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
- * which automatically finds the path.
- */
- #egdpool_path = "/var/run/egd-pool";
-
-
/* compression level: level of compression for compressed links between
* servers.
*
*/
#compression_level = 6;
- /* burst_away: This enables bursting away messages to servers.
- * With this disabled, we will only propogate AWAY messages
- * as users send them, but never burst them. Be warned though
- * enabling this could increase the size of a burst significantly
- * for a large network, like EFnet.
- */
- burst_away = yes;
+ /* burst_away: This enables bursting away messages to servers.
+ * With this disabled, we will only propogate AWAY messages
+ * as users send them, but never burst them. Be warned though
+ * enabling this could increase the size of a burst significantly
+ * for a large network, like EFnet.
+ */
+ burst_away = yes;
/* nick delay: This locks nicks of split clients for the given time
* or until a remote client uses the nick. This significantly
/* reject duration: the amount of time to cache the rejection */
reject_duration = 5 minutes;
- /* max_unknown_ip: maximum number of pending connections to the server
- * that are allowed per IP address
+ /* throttle_duration: Amount of time that throttling will be applied to an IP
+ * address.
+ */
+ throttle_duration = 60;
+
+ /* throttle_count: Number of connections within throttle_duration that it takes
+ * for throttling to take effect */
+ throttle_count = 4;
+
+ /* client flood_max_lines: maximum number of lines in a clients queue before
+ * they are dropped for flooding.
+ */
+ client_flood_max_lines = 20;
+
+ /* Flood control settings. DO NOT CHANGE THESE without extensive discussion
+ * and testing by someone who knows exactly what they do.
+ *
+ * These settings replicate charybdis-3.3 behaviour.
+ */
+ client_flood_burst_rate = 40;
+ client_flood_burst_max = 5;
+ client_flood_message_time = 1;
+ client_flood_message_num = 2;
+
+ /* max_ratelimit_tokens: the maximum number of ratelimit tokens that one
+ * user can accumulate. This attempts to limit the amount of outbound
+ * bandwidth one user can consume. Do not change unless you know what
+ * you're doing.
+ */
+ max_ratelimit_tokens = 30;
+
+ /* away_interval: the minimum interval between AWAY commands. One
+ * additional AWAY command is allowed, and only marking as away
+ * counts.
+ */
+ away_interval = 30;
+
+ /* certfp_method: the method that should be used for computing certificate fingerprints.
+ * Acceptable options are sha1, sha256 and sha512. Networks running versions of charybdis
+ * prior to charybdis 3.5 MUST use sha1 for certfp_method.
*/
- max_unknown_ip = 2;
+ certfp_method = sha1;
};
modules {
path = "/usr/local/ircd/modules/autoload";
/* module: the name of a module to load on startup/rehash */
- #module = "some_module.so";
+ #module = "some_module.la";
};