-#************************************************************************
-#* IRC - Internet Relay Chat, Makefile
-#* Copyright (C) 1990, Jarkko Oikarinen
-#*
-#* This program is free software; you can redistribute it and/or modify
-#* it under the terms of the GNU General Public License as published by
-#* the Free Software Foundation; either version 1, or (at your option)
-#* any later version.
-#*
-#* This program is distributed in the hope that it will be useful,
-#* but WITHOUT ANY WARRANTY; without even the implied warranty of
-#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#* GNU General Public License for more details.
-#*
-#* You should have received a copy of the GNU General Public License
-#* along with this program; if not, write to the Free Software
-#* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#*
-#* $Id: Makefile.in 1347 2006-05-17 14:49:13Z nenolod $
-#*/
-
-RM=@RM@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = @bindir@
-mandir = @mandir@
-moduledir = @moduledir@
-helpdir = @helpdir@
-confdir = @confdir@
-logdir = @logdir@
-
-# Default CFLAGS
-# CFLAGS = -g -O2 -DNDEBUG
-CFLAGS = @CFLAGS@
-# Developers CFLAGS
-#CFLAGS= -g -O2 -Wunused -Wall -ggdb -pedantic -Wshadow -Wmissing-declarations
-
-# Default make flags - you may want to uncomment this on a multicpu machine
-#MFLAGS = -j 4
-
-#
-# For developers
-#CFLAGS= -g -O2 -Wall
-
-# You may need to define the FD_SETSIZE in order to overrule
-# the system one.
-#CFLAGS= -DNDEBUG -g -O2 -D"FD_SETSIZE=1024"
-SHELL=/bin/sh
-SUBDIRS=libratbox modules extensions src tools ssld doc help
-CLEANDIRS = ${SUBDIRS}
-RSA_FILES=rsa_respond/README rsa_respond/respond.c rsa_respond/Makefile
-
-MAKE = make ${MFLAGS}
-
-all: build
-
-
-autoconf: configure.ac
- autoconf
- autoheader
- ${RM} -f config.cache
-
-build:
- -@if [ ! -f include/setup.h ] ; then \
- echo "Hmm...doesn't look like you've run configure..."; \
- echo "Doing so now."; \
- sh configure; \
- fi
- @if [ -d .hg ] ; then \
- revh=`hg parents --template '#date|shortdate#_#node|short#' 2>/dev/null | sed -e s/-//g -e s/_/-/`;\
- [ -z "$$revh" ] || echo '#define SERNO "'$$revh'"' >include/serno.h ; \
- fi
- @[ -f include/serno.h ] || echo '#define SERNO "unknown"' >include/serno.h
- @for i in $(SUBDIRS); do \
- echo "build ==> $$i";\
- cd $$i;\
- ${MAKE} || exit; cd ..;\
- done
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
-clean:
- ${RM} -f *~ core rsa_respond.tar rsa_respond.tar.gz
- @for i in $(CLEANDIRS); do \
- echo "clean ==> $$i";\
- cd $$i;\
- ${MAKE} clean; cd ..;\
- done
- -@if [ -f include/setup.h ] ; then \
- echo "To really restart installation, make distclean" ; \
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@BUILD_LTDL_TRUE@am__append_1 = libltdl
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/libltdl/m4/argz.m4 \
+ $(top_srcdir)/libltdl/m4/libtool.m4 \
+ $(top_srcdir)/libltdl/m4/ltdl.m4 \
+ $(top_srcdir)/libltdl/m4/ltoptions.m4 \
+ $(top_srcdir)/libltdl/m4/ltsugar.m4 \
+ $(top_srcdir)/libltdl/m4/ltversion.m4 \
+ $(top_srcdir)/libltdl/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/charybdis.m4 $(top_srcdir)/m4/pkg.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/setup.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = libratbox libltdl ircd ssld authd bandb tools modules \
+ extensions help doc
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+ $(top_srcdir)/include/setup.h.in \
+ $(top_srcdir)/libltdl/config/ar-lib \
+ $(top_srcdir)/libltdl/config/compile \
+ $(top_srcdir)/libltdl/config/config.guess \
+ $(top_srcdir)/libltdl/config/config.sub \
+ $(top_srcdir)/libltdl/config/install-sh \
+ $(top_srcdir)/libltdl/config/ltmain.sh \
+ $(top_srcdir)/libltdl/config/missing INSTALL install-sh \
+ libltdl/config/ar-lib libltdl/config/compile \
+ libltdl/config/config.guess libltdl/config/config.sub \
+ libltdl/config/depcomp libltdl/config/install-sh \
+ libltdl/config/ltmain.sh libltdl/config/missing \
+ libltdl/config/ylwrap
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+pkglibdir = @pkglibdir@
+pkglibexecdir = @pkglibexecdir@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+ARGZ_H = @ARGZ_H@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CP = @CP@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CRYPT_LIB = @CRYPT_LIB@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENCSPEED = @ENCSPEED@
+ETC_DIR = @ETC_DIR@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+HELP_DIR = @HELP_DIR@
+INCLTDL = @INCLTDL@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IRC_CFLAGS = @IRC_CFLAGS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBADD_DL = @LIBADD_DL@
+LIBADD_DLD_LINK = @LIBADD_DLD_LINK@
+LIBADD_DLOPEN = @LIBADD_DLOPEN@
+LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@
+LIBLTDL = @LIBLTDL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN = @LN@
+LN_S = @LN_S@
+LOG_DIR = @LOG_DIR@
+LTDLDEPS = @LTDLDEPS@
+LTDLINCL = @LTDLINCL@
+LTDLOPEN = @LTDLOPEN@
+LTLIBOBJS = @LTLIBOBJS@
+LT_CONFIG_H = @LT_CONFIG_H@
+LT_DLLOADERS = @LT_DLLOADERS@
+LT_DLPREOPEN = @LT_DLPREOPEN@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MODULES_LIBS = @MODULES_LIBS@
+MODULE_DIR = @MODULE_DIR@
+MOD_TARGET = @MOD_TARGET@
+MV = @MV@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PICFLAGS = @PICFLAGS@
+PKGLIBEXECDIR = @PKGLIBEXECDIR@
+PKGLOCALSTATEDIR = @PKGLOCALSTATEDIR@
+PKGRUNDIR = @PKGRUNDIR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PROGRAM_PREFIX = @PROGRAM_PREFIX@
+RANLIB = @RANLIB@
+RM = @RM@
+SED = @SED@
+SEDOBJ = @SEDOBJ@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SQLITE_CFLAGS = @SQLITE_CFLAGS@
+SQLITE_INCLUDES = @SQLITE_INCLUDES@
+SQLITE_LD = @SQLITE_LD@
+SQLITE_LIBS = @SQLITE_LIBS@
+SQLITE_OBJ = @SQLITE_OBJ@
+SSL_INCLUDES = @SSL_INCLUDES@
+SSL_LIBS = @SSL_LIBS@
+SSL_SRCS_ENABLE = @SSL_SRCS_ENABLE@
+STRIP = @STRIP@
+TOUCH = @TOUCH@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+ZLIB_LD = @ZLIB_LD@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+helpdir = @helpdir@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @prefix@/logs
+ltdl_LIBOBJS = @ltdl_LIBOBJS@
+ltdl_LTLIBOBJS = @ltdl_LTLIBOBJS@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+moduledir = @moduledir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkglocalstatedir = @pkglocalstatedir@
+pkgrundir = @pkgrundir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+rundir = @rundir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sys_symbol_underscore = @sys_symbol_underscore@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign
+ACLOCAL_AMFLAGS = -I m4
+SUBDIRS = libratbox $(am__append_1) ircd ssld authd bandb tools \
+ modules extensions help doc
+BUILT_SOURCES = include/serno.h
+all: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+include/setup.h: include/stamp-h1
+ @test -f $@ || rm -f include/stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/stamp-h1
+
+include/stamp-h1: $(top_srcdir)/include/setup.h.in $(top_builddir)/config.status
+ @rm -f include/stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status include/setup.h
+$(top_srcdir)/include/setup.h.in: $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f include/stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f include/setup.h include/stamp-h1
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
fi
+ctags: ctags-recursive
-distclean:
- ${RM} -f Makefile *~ *.rej *.orig core ircd.core
- ${RM} -f config.status config.cache config.log
- cd include; ${RM} -f setup.h *~ *.rej *.orig ; cd ..
- @for i in $(CLEANDIRS); do \
- echo "distclean ==> $$i";\
- cd $$i;\
- ${MAKE} distclean; cd ..;\
- done
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
-depend:
- @[ -f include/serno.h ] || echo '#define SERNO "unknown"' >include/serno.h
- @for i in $(SUBDIRS); do \
- echo "depend ==> $$i";\
- cd $$i;\
- ${MAKE} depend; cd ..;\
- done
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-lint:
- @for i in $(SUBDIRS); do \
- echo "lint ==> $$i";\
- cd $$i;\
- ${MAKE} lint; cd ..;\
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
-install-mkdirs:
- @echo "ircd: setting up ircd directory structure"
- -@if test ! -d $(DESTDIR)$(prefix); then \
- mkdir $(DESTDIR)$(prefix); \
- fi
- -@if test ! -d $(DESTDIR)$(bindir); then \
- mkdir $(DESTDIR)$(bindir); \
- fi
- -@if test ! -d $(DESTDIR)$(confdir); then \
- mkdir $(DESTDIR)$(confdir); \
- fi
- -@if test ! -d $(DESTDIR)$(mandir); then \
- mkdir $(DESTDIR)$(mandir); \
- fi
- -@if test ! -d $(DESTDIR)$(moduledir); then \
- mkdir $(DESTDIR)$(moduledir); \
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
fi
- -@if test ! -d $(DESTDIR)$(helpdir); then \
- mkdir $(DESTDIR)$(helpdir); \
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
- -@if test ! -d $(DESTDIR)$(logdir); then \
- mkdir $(DESTDIR)$(logdir); \
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) all check install install-am \
+ install-data-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ clean-libtool cscope cscopelist-am ctags ctags-am dist \
+ dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+ dist-xz dist-zip distcheck distclean distclean-generic \
+ distclean-hdr distclean-libtool distclean-tags distcleancheck \
+ distdir distuninstallcheck dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-data-hook install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+ uninstall-am
+
+.PRECIOUS: Makefile
+
+
+include/serno.h:
+ @if [ -d .git ] ; then \
+ revh=`git log -1 --date=short --pretty=format:%cd_%h 2>/dev/null | sed -e s/-//g -e s/_/-/`;\
+ [ -z "$$revh" ] || echo '#define SERNO "'$$revh'"' >include/serno.h ; \
+ elif [ -d .hg ] ; then \
+ revh=`hg parents --template '{date|shortdate}_{node|short}' 2>/dev/null | sed -e s/-//g -e s/_/-/`;\
+ [ -z "$$revh" ] || echo '#define SERNO "'$$revh'"' >include/serno.h ; \
fi
-
-install: install-mkdirs all
- @for i in $(SUBDIRS); do \
- echo "install ==> $$i";\
- cd $$i;\
- ${MAKE} install; \
- cd ..; \
- done
+ @[ -f include/serno.h ] || echo '#define SERNO "unknown"' >include/serno.h
+
+install-data-hook:
+ test -d ${DESTDIR}${logdir} || mkdir -p ${DESTDIR}${logdir}
-rsa_respond:
- @cd tools;\
- echo "Creating rsa_respond.tar.gz";\
- tar cf ../rsa_respond.tar $(RSA_FILES);\
- cd ..;\
- gzip rsa_respond.tar
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: