Upon receiving the SERVER, the initiator will send SVINFO and the burst. If
ziplinks are used, SVINFO is the first compressed message.
-The burst consists of SID and SERVER messages for all known servers, UID or
-EUID messages for all known users (possibly followed by ENCAP REALHOST, ENCAP
-LOGIN and/or AWAY) and SJOIN messages for all known channels (possibly followed
-by BMASK and/or TB).
+The burst consists of SID and SERVER messages for all known servers, BAN
+messages for all propagated bans, UID or EUID messages for all known users
+(possibly followed by ENCAP REALHOST, ENCAP LOGIN and/or AWAY) and SJOIN
+messages for all known channels (possibly followed by BMASK and/or TB).
user modes:
(all)
+v (prefix +) (voice)
type A
+b (ban)
-+e (ban exception)
-+I (invite exception)
++e (ban exception) (capab: EX)
++I (invite exception) (capab: IE)
type B
+k (key: password required to join, <= 23 ascii chars, no : or , or whitespace)
type C
+m (moderated)
+n (no external messages)
+p (private: does not appear in /whois to non-members, no /knock allowed)
-+r (only registered users may join) (only if a services server exists)
++r (only registered users may join) (only if a services server exists) (capab: SERVICES)
+s (secret)
+t (only chanops may change topic)
(charybdis TS6)
+g (allow any member to /invite)
+z (send messages blocked by +m to chanops)
+<numeric>
+source: server
+parameters: target, any...
+
+The command name should be three decimal ASCII digits.
+
+Propagates a "numeric" command reply, such as from a remote WHOIS request.
+
+If the first digit is 0 (indicating a reply about the local connection), it
+should be changed to 1 before propagation or sending to a user.
+
+Numerics to the local server may be sent to opers.
+
+To avoid infinite loops, servers should not send any replies to numerics.
+
+The target can be:
+- a client
+ propagation: one-to-one
+- a channel name
+ propagation: all servers with -D users on the channel
+
+Numerics to channels are broken in some older servers.
+
ADMIN
source: user
parameters: hunted
Changing away reason from one non-empty string to another non-empty string
may not be propagated.
+BAN
+charybdis TS6
+capab: BAN
+source: any
+propagation: broadcast (restricted)
+parameters: type, user mask, host mask, creation TS, duration, lifetime, oper, reason
+
+Propagates a network wide ban.
+
+The type is K for K:lines, R for resvs and X for X:lines; other types are
+reserved. The user mask field is only used for K:lines; for resvs and X:lines
+the field is ignored in input and sent as an asterisk.
+
+The creation TS indicates when this ban was last modified. An incoming ban MUST
+be ignored and not propagated if the creation TS is older than the creation TS
+of the current ban. If the ban is identical, it SHOULD NOT be propagated to
+avoid unnecessary network traffic. (Two changes to bans that set the TS to the
+same value may cause desynchronization.)
+
+The duration is 0 for an unban and relative to the creation TS for a ban.
+When the duration has passed, the ban is no longer active but it may still
+be necessary to remember it.
+
+The lifetime is relative to the creation TS and indicates for how long this
+ban needs to be remembered and propagated. This MUST be at least the duration.
+Initially, it is usually set the same as the duration but when the ban is
+modified later, it SHOULD be set such that the modified ban is remembered at
+least as long as the original ban. This ensures that the original ban does not
+revive via split servers. This requirement is only a SHOULD to allow for
+implementations that only inject bans and do not remember any; implementations
+that remember and propagate bans MUST set the lifetime appropriately.
+
+The oper field indicates the oper that originally set the ban. If this message
+is the initial propagation of a change, it SHOULD be sent as * (an asterisk).
+
+The reason field indicates the reason for the ban. Any part after a | (vertical
+bar) MUST NOT be shown to normal users. The rest of the field and the creation
+TS and duration MAY be shown to normal users.
+
BMASK
source: server
propagation: broadcast
Capability list of remote server.
+GLINE
+efnet TS6
+capab: GLN
+source: user
+parameters: user mask, host mask, reason
+propagation: broadcast
+
+Propagates a G:line vote. Once votes from three different opers (based on
+user@host mask) on three different servers have arrived, trigger the G:line.
+Pending G:lines expire after some time, usually ten minutes. Triggered G:lines
+expire after a configured time which may differ across servers.
+
+Requests from server connections must be propagated, unless they are found to
+be syntactically invalid (e.g. '!' in user mask). Therefore, disabling glines
+must not affect propagation, and too wide glines, double votes and glines that
+already exist locally must still be propagated.
+
+Of course, servers are free to reject gline requests from their own operators.
+
+GUNGLINE
+efnet TS6
+encap only
+encap target: *
+source: user
+parameters: user mask, host mask, reason
+propagation: broadcast
+
+Propagates a G:line removal vote. Once three votes have arrived (as with
+G:lines), remove the G:line. Pending G:lines removals expire after some time,
+usually ten minutes.
+
+Pending G:line removals do not interact with pending G:lines. Triggering a
+G:line does not affect a pending G:line removal. Triggering a G:line removal
+does not affect a pending G:line.
+
INFO
source: user
parameters: hunted
As form 1, deprecated.
KNOCK
+capab: KNOCK
source: user
parameters: channel
propagation: broadcast
Remote LUSERS request. Most servers ignore the server mask, treating it as '*'.
+MLOCK
+charybdis TS6
+source: services server
+parameters: channelTS, channel, mode letters
+propagation: broadcast (restricted)
+
+Propagates a channel mode lock change.
+
+If the channelTS is greater (newer) than the current TS of the channel, drop
+the message.
+
+The final parameter is a list of mode letters that may not be changed by local
+users. This applies to setting or unsetting simple modes, and changing or
+removing mode parameters.
+
+An MLOCK message with no modes disables the MLOCK, therefore the MLOCK message
+always contains the literal MLOCK for simplicity.
+
MODE
1.
source: user
As PRIVMSG, except NOTICE messages are sent out, server sources are permitted
and most error messages are suppressed.
+Servers may not send '$$', '$#' and opers@server notices. Older servers may
+not allow servers to send to specific statuses on a channel.
+
OPERSPY
encap only
encap target: *
remotely)
- a status character ('@'/'+') followed by a channel name, to send to users
with that status or higher only.
+ capab: CHW
propagation: all servers with -D users with appropriate status
+- '=' followed by a channel name, to send to chanops only, for cmode +z.
+ capab: CHW and EOPMOD
+ propagation: all servers with -D chanops
- a user@server message, to send to users on a specific server. The exact
meaning of the part before the '@' is not prescribed, except that "opers"
allows IRC operators to send to all IRC operators on the server in an
propagation: one-to-one
- a message to all users on server names matching a mask ('$$' followed by mask)
propagation: broadcast
+ Only allowed to IRC operators.
- a message to all users with hostnames matching a mask ('$#' followed by mask).
Note that this is often implemented poorly.
propagation: broadcast
+ Only allowed to IRC operators.
+
+In charybdis TS6, services may send to any channel and to statuses on any
+channel.
PRIVS
charybdis TS6
completes.
TB
+capab: TB
source: server
propagation: broadcast
-parameters:
+parameters: channel, topicTS, opt. topic setter, topic
+
+Propagates a channel topic as part of a burst.
+
+If the channel had no topic yet or the topicTS in the message is older than
+the topicTS of the current topic on the channel and the topics differ, set
+the topic with topicTS and topic setter, and propagate the message. Otherwise
+ignore the message and do not propagate it.
+
+If the topic setter is not present, use a server name instead.
TIME
source: user
TOPIC
source: user
propagation: broadcast
+parameters: channel, topic
Propagates a channel topic change. The server may verify that the source has
ops in the channel.
+The topicTS shall be set to the current time and the topic setter shall be
+set indicating the source user. Note that this means that the topicTS of a
+topic set with TOPIC is not necessarily consistent across the network.
+
TRACE
source: user
1.
projects / irc / rqf / shadowircd.git / blobdiff