-/* doc/reference.conf - charybdis Example configuration file
+/* doc/reference.conf - shadowircd Example configuration file
*
* Copyright (C) 2000-2002 Hybrid Development Team
* Copyright (C) 2002-2005 ircd-ratbox development team
* Find channel forwards -- m_findforwards.so
* /identify support -- m_identify.so
* /mkpassword support -- m_mkpasswd.so
- * Send message to all admins network-wide -- m_adminwall.so
+ * WEBIRC support -- m_webirc.so
+ * Server-side /CYCLE -- m_cycle.so
+ * /oaccept - add to target's accept list, oper only -- m_oaccept.so
* /opme - op self in opless channels, admin only -- m_opme.so
* /ojoin - join despite restrictions, admin only -- m_ojoin.so
* /omode - force modes in channels, admin only -- m_omode.so
* /olist - see all channels in /list, oper only -- m_olist.so
+ * /okick - kick users without having ops, oper only -- m_okick.so
* /forcejoin - force join users, admin only -- m_force.so
* Opers cannot be invisible (umode +i) -- no_oper_invis.so
* Far connection notices (snomask +F) -- sno_farconnect.so
#loadmodule "extensions/m_findforwards.so";
loadmodule "extensions/m_identify.so";
loadmodule "extensions/m_mkpasswd.so";
-#loadmodule "extensions/m_adminwall.so";
+loadmodule "extensions/m_webirc.so";
+#loadmodule "extensions/m_cycle.so";
+#loadmodule "extensions/m_oaccept.so";
#loadmodule "extensions/m_opme.so";
#loadmodule "extensions/m_ojoin.so";
#loadmodule "extensions/m_omode.so";
#loadmodule "extensions/m_olist.so";
+#loadmodule "extensions/m_okick.so";
#loadmodule "extensions/m_force.so";
#loadmodule "extensions/no_oper_invis.so";
loadmodule "extensions/sno_farconnect.so";
loadmodule "extensions/sno_globaloper.so";
#loadmodule "extensions/sno_whois.so";
+/* modesets: Modesets are modules that enable various user and channel
+ * modes. When enabled, they enable usermodes and channel modes equivalent
+ * to the named ircd. This is useful for linking to other TS6 IRCds.
+ * If you do not know what this does or do not know if you need it
+ * then you should just load modes/shadowircd.so for full functionality.
+ * Without any modeset loaded, you will only have the modes that are included
+ * in ircd-ratbox. Unloading a modeset while the ircd is running is possible,
+ * but will be confusing for users, as it will leave all existent unloaded
+ * modes in place without users being able to remove them. Said modes will,
+ * however, not function. You should be able to load a module that provides
+ * more modes than your current (say, going from charybdis to shadowircd)
+ * on the fly without any problems. The slight exception to this is unloading
+ * a module that provides quiets (cmode +q). Users affected by quiets will
+ * have to part and rejoin the channel before the quiet will cease affecting
+ * them. In addition, unloaded modes will remain in the IRCd's VERSION reply
+ * until restart. For these reasons, it is highly recommended to restart if you wish
+ * to change modeset.
+ * Modesets currently only affect cmodes.
+ * You should only load one of these at a time.
+ * Modules are listed in order of highest functionality to least,
+ * while no module provides the least functionality of all. */
+
+loadmodule "modes/shadowircd.so";
+#loadmodule "modes/charybdis.so";
+
/* serverinfo {}: Contains information about the server. (OLD M:) */
serverinfo {
network_name = "MyNet";
network_desc = "This is My Network";
+ /* helpchan/helpurl: These 2 items are shown when a user does
+ * /quote help with no additional parameters to direct them
+ * to a channel/URL where they can get more or network-specific help.
+ * They can be commented out and will not show to users if they are.
+ */
+ helpchan = "#help";
+ helpurl = "http://www.mynet.net/help";
+
/* hub: allow this server to act as a hub and have multiple servers
* connected to it.
*/
class = "opers";
};
+/* Example WEBIRC authblock */
+auth {
+ /* user: webirc@IP.OF.YOUR.WEBIRC . the webirc@ part is required */
+ user = "webirc@192.168.1.1";
+
+ /* password: password the webirc client sends in the WEBIRC command.
+ * You can use a encrypted password here (see above auth block).
+ */
+ password = "<password>";
+
+ /* spoof: This is required to keep it what it is currently if you
+ * want the webirc client to show the users' real host as their
+ * host on IRC.
+ */
+ spoof = "webirc.";
+ class = "users";
+};
+
auth {
/* redirect: the server and port to redirect a user to. A user does
* not have to obey the redirection, the ircd just suggests to them
* oper:xline: allows use of /quote xline/unxline
* oper:resv: allows /quote resv/unresv and cmode +LP
* oper:operwall: allows the oper to send/receive operwalls
+ * oper:override: allows the oper to set umode +p on themself
+ which grants the ability to have implicit
+ operator access in all channels.
* oper:spy: allows 'operspy' features to see through +s
* channels etc. see /quote help operspy
* oper:hidden: hides the oper from /stats p
privset "admin" {
extends = "global_op";
- privs = oper:admin, oper:die, oper:rehash, oper:spy;
+ privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:override;
};
/* operator {}: defines ircd operators. (OLD O:) */
/* snomask: specific server notice mask on oper up.
* If this is specified an oper will not be given oper_snomask.
*/
- snomask = "+Zbfkrsuy";
+ snomask = "+FZbcfkrsuy";
+
+ /* vhost: defines the vhost that this oper will get on oper up.
+ * this must be a valid hostmask. If this is specified the oper
+ * will not be given default_operhost.
+ */
+ vhost = "is.an.oper";
+
+ /* swhois: defines an additional line that will be displayed
+ * whenever someone does /whois on the oper in question.
+ */
+ swhois = "is wearing pants.";
+
+ /* operstring: defines a custom operstring for this oper,
+ * which will be shown in whois instead of default_operstring
+ * or default_adminstring.
+ */
+ operstring = "is a lazy IRC Operator";
/* flags: misc options for the operator. You may prefix an option
* with ~ to disable it, e.g. ~encrypted.
* resv - allow setting perm/temp resvs
* tresv - allow setting temp resvs
* unresv - allow removing xlines
+ * rehash - allow rehashing
* all - allow oper/server to do all of above.
* locops - allow locops - only used for servers who cluster
- * rehash - allow rehashing
+ * die - allow restarting/dying of servers
+ * modules - allow loading/unloading/reloading of modules
* dline - allow setting perm/temp dlines
* tdline - allow setting temp dlines
* undline - allow removing dlines
*/
autochanmodes = "nt";
+ /* admin_on_channel_create: If set to yes, users joining new channels
+ * will be given +ao instead of just +o. Requires use_admin.
+ */
+ admin_on_channel_create = no;
+
/* exemptchanops: Channel modes that any form of channel ops (+aoh)
* will be exempt from. Even if the mode is set, it will not apply to the
* channel ops if it is listed in this option. Valid modes are cCDTNGK.
*/
use_halfop = yes;
- /* owner: Enable/disable channel mode +a, which adds owner,
+ /* admin: Enable/disable channel mode +a, which adds admin,
* a channel status above op that has op powers (kick, ban, mode, etc.)
- * owners can only be kicked/deownered by other owners, and may kick
- * or deop ops and halfops. Disabling this via rehash will
- * cause things which are rather confusing to occur, it is highly
- * recommended to restart if you wish to disable this option, though
- * it may be enabled by rehash with no problems.
+ * admins can only be kicked/deadmined by other admins, and may kick
+ * or deop anyone. Disabling this via rehash will cause things which
+ * are rather confusing to occur, it is highly recommended to restart
+ * if you wish to disable this option, though it may be enabled
+ * by rehash with no problems.
*/
- use_owner = yes;
+ use_admin = yes;
/* invex: Enable/disable channel mode +I, a n!u@h list of masks
* that can join a +i channel without an invite. Disabling this option
*/
use_except = yes;
- /* forward: Enable/disable channel mode +f, a channel to forward
- * users to if they can't join because of +i etc.
- */
- use_forward = yes;
-
/* knock: Allows users to request an invite to a channel that
* is locked somehow (+ikl). If the channel is +p or you are banned
* the knock will not be sent.
*/
resv_forcepart = yes;
- /* kick_no_rejoin_time: the amount of time that a user cannot
- * rejoin for after being kicked out of a +J channel.
+ /* channel target change: restrict how many channels users can
+ * message per unit of time. IRC operators, channel operators and
+ * voiced users are exempt.
*/
- kick_no_rejoin_time = 30 seconds;
+ channel_target_change = yes;
};
* See <http://www.ahbl.org/services.php> for more information.
*/
blacklist {
+ host = "rbl.efnetrbl.org";
+ reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
+
host = "dnsbl.dronebl.org";
reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
target = "BotServ";
};
+alias "InfoServ" {
+ target = "InfoServ";
+};
+
+alias "GroupServ" {
+ target = "GroupServ";
+};
+
alias "NS" {
target = "NickServ";
};
target = "BotServ";
};
+alias "IS" {
+ target = "InfoServ";
+};
+
+alias "GS" {
+ target = "GroupServ";
+};
+
/* The general block contains many of the options that were once compiled
* in options in config.h. The general block is read at start time.
*/
*/
default_operhost = "staff.testnet.net";
+ /* static quit: Quit message to display for all users (not opers)
+ * on QUIT.
+ */
+ #static_quit = "I like turtles!";
+
/* servicestring: defines the response for opered services (+S)
* in /whois queries, eg "is a Network Service".
* This is updated on rehash.
*/
disable_fake_channels = no;
+ /* hide_channel_below_users: Amount of users a channel must have in it
+ * before it is shown in a standard LIST. This can be overridden by
+ * invoking LIST like: /LIST <3
+ */
+ hide_channel_below_users = 3;
+
/* tkline_expire_notices: give a notice to opers when a tkline
* expires
*/
*/
min_nonwildcard_simple = 3;
- /* max accept: maximum allowed /accept's for +g usermode */
+ /* max accept: maximum allowed /accept's for +gGR usermodes */
max_accept = 20;
/* max monitor: the maximum amount of nicknames a client may have in
max_nick_time = 20 seconds;
max_nick_changes = 5;
- /* anti spam time: the minimum time a user must be connected before
+ /* anti spam time: the minimum time a user must be connected before
* custom quit messages are allowed.
*/
- anti_spam_exit_message_time = 5 minutes;
+ anti_spam_exit_message_time = 5 minutes;
+
+ /* use part messages: This option controls whether users should be
+ * allowed to send PART messages to channels. It should probably
+ * be set to no if static_quit is set.
+ */
+ use_part_messages = yes;
/* ts delta: the time delta allowed between server clocks before
* a warning is given, or before the link is dropped. all servers
/* kline reason: make the users quit message on channels this
* reason instead of the oper's reason.
*/
- kline_reason = "Connection closed";
+ kline_reason = "K-Lined";
/* identify to services via server password
* if auth{} block had no password but the user specified a
*/
warn_no_nline = yes;
+ /* use propagated bans: KLINE, XLINE and RESV set fully propagated bans.
+ * That means the bans are part of the netburst and restarted/split
+ * servers will get them, but they will not apply to 3.2 and older
+ * servers at all.
+ */
+ use_propagated_bans = yes;
+
/* stats e disabled: disable stats e. useful if server ips are
* exempted and you dont want them listing on irc.
*/
*/
connect_timeout = 30 seconds;
+ /* ident timeout: Amount of time (in seconds) that the IRCd will
+ * wait for a user to respond to an ident request.
+ */
+ default_ident_timeout = 5;
+
/* disable auth: disables identd checking */
disable_auth = no;
- /* no oper flood: increase flood limits for opers. */
+ /* no oper flood: increase flood limits for opers.
+ * This option quadruples the user command flood limits, it
+ * DOES NOT affect PRIVMSG/NOTICE usage.
+ */
no_oper_flood = yes;
+ /* true no oper flood: Allow opers to NEVER hit flood limits.
+ * With the above setting, flood limits are set to 4x what they
+ * are for normal users. With this setting, they're removed entirely.
+ * For this setting to work, you need to have no_oper_flood enabled as well.
+ * This option DOES allow PRIVMSG/NOTICE flooding.
+ * ENABLE THIS SETTING WITH CAUTION.
+ */
+ true_no_oper_flood = no;
+
/* REMOVE ME. The following line checks you've been reading. */
havent_read_conf = yes;
* +C - noctcp - Block CTCPs to user.
* +V - noinvite - Block INVITE to user.
* +B - bot - Marks as a bot.
+ * +p - override - Implicit operator access in all channels.
+ * This is oper-only and requires the oper:override priv.
*/
/* oper only umodes: usermodes only opers may set */
/* throttle_count: Number of connections within throttle_duration that it takes
* for throttling to take effect */
throttle_count = 4;
+
+ /* expire_override_time: User mode +p will be automatically unset
+ * this long after it is set. 0 disables this. Default is 5 minutes.
+ */
+ expire_override_time = 5 minutes;
};
modules {