" For example: $b/msg $C HELP UBM$b ",
" shows help with the Un-Ban Me command. ",
"=---------------------------------------=",
- " GENERAL - How to use $C ",
+ " GENERAL - How to get and communicate with $C ",
" USER - Commands to add and remove",
" bans, ops and managers from ",
" your channel.",
" $bMLIST$b Show all MANAGERs of a channel.",
" $bOLIST$b Show all OPs of a channel.",
" $bHLIST$b Show all HALFOPs of a channel.",
- " $bPLIST$b Show all PEONs of a channel.",
+ " $bPLIST$b Show all PALs of a channel.",
" $bLAMERS$b Show all LAMERs of a channel.",
" $bACCESS$b Check someone's access level in a channel.",
" $bCLVL$b Change a person's access level in a channel.",
" $bUSET$b Set a channel user's options (autos, info).",
" $bSEEN$b Find out the last time a user was in a channel.",
"$b$b",
- " $bADDPEON$b Add a user as a PEON in a channel.",
+ " $bADDPAL$b Add a user as a PAL in a channel.",
" $bADDHOP$b Add a user as an HALFOP in a channel.",
" $bADDOP$b Add a user as an OP in a channel.",
" $bADDMANAGER$b Add a user as a MANAGER in a channel.",
" $bMDELMANAGER$b Mass-delete managers with accounts matching a mask.",
" $bMDELOP$b Mass-delete ops with accounts matching a mask.",
" $bMDELHOP$b Mass-delete halfops with accounts matching a mask.",
- " $bMDELPEON$b Mass-delete peons with accounts matching a mask.",
+ " $bMDELPAL$b Mass-delete pals with accounts matching a mask.",
" $bDELLAMER$b Remove the specified lamer from the lamer list.",
" $bWIPEINFO$b Remove a lower-ranked user's infoline.",
" $bTRIM$b Delete users who are inactive.",
" $bDEHOP$b Remove halfops from the specified user.",
" $bVOICE$b Give voice to the specified user.",
" $bDEVOICE$b Remove voice from the specified user.",
- " $bRESYNC$b Synchronize ops and voice with the channel userlist.",
+ " $bRESYNC$b Synchronize (half)ops and voice with the channel userlist.",
"$b$b",
" $bKICK$b Kick a user from a channel.",
" $bBAN$b Ban a user from a channel.",
" $bUNBANALL$b Remove all bans from a channel.",
" $bINVITE$b Admit a user to pass through +ib modes in your channel.",
"$b$b",
- " $bINFO$b Show numerical information about the users in a channel.",
+ " $bINFO$b Show information about a channel.",
" $bEVENTS$b View a list of events relevant to a channel."
);
"INFORMATION" ("$bInformative Commands:$b",
+ " $bMYACCESS$b Show all the channels you have access to.",
" $bVERSION$b Check the current running version of $C.",
" $bNETINFO$b Check current network-wide information.",
" $bSTAFF$b Get a list of all the current staff.",
" $bIRCOPS$b Get a list of all the current IRC operators.",
" $bHELPERS$b Get a list of all the current support helpers.",
" $bPEEK$b Reveal information on a channel's modes, topic and ops.",
- " $bCOMMAND$b Display some information about a command."
+ " $bCOMMAND$b Display some information about a command.",
+ " $bINFO$b Gets channel information about a channel.",
+ " $bEVENTS$b View a list of events relevant to a channel.",
+ " $b$b ",
+ " $bUSERS$b Show the channels userlist.",
+ " $bCLIST$b Show all COOWNERs of a channel.",
+ " $bMLIST$b Show all MANAGERs of a channel.",
+ " $bOLIST$b Show all OPs of a channel.",
+ " $bHLIST$b Show all HALFOPs of a channel.",
+ " $bPLIST$b Show all PALs of a channel.",
+ " $bLAMERS$b Show all LAMERs of a channel.",
+ " $bACCESS$b Check someone's access level in a channel.",
);
"OPER" ("$bHelper/IRC Operator commands:$b",
" $bGOD$b Turn security override on/off.",
);
"GENERAL" (
- " NOTE: Before using $C or being added ",
- " to channel userlists, users must ",
- " register an account with $b$N$b. ",
- " $b/MSG $N help$b for more information ",
+ "$b-$N Accounts$b-",
+ " Before using $C or being added to ",
+ " channel userlists, you and your users ",
+ " must register an account with $b$N$b. ",
+ " $b/MSG $N help$b to learn how. ",
"$b$b",
+ "$b-Talking to $C-$b",
" $C uses a standard interface for each ",
" command in its command list. Commands ",
" can be issued either in /MSG format or ",
" in a channel which $C is in. These two ",
" ways are demonstrated below:",
" $b/MSG $C OP #chatzone Locke$b",
- " $b.OP #chatzone locke$b",
+ " $b$!OP #chatzone locke$b",
"$b$b",
" If a command is given in a channel, and ",
" the channel parameter is not given, the ",
" channel that the command was issued in ",
" will be used:",
- " $b.OP locke$b",
+ " $b$!OP locke$b",
"$b$b",
- " Some commands, such as $bNETSTATS$b ",
+ " Some commands, such as $bNETINFO$b ",
" don't require a channel. If one is ",
" supplied it will be ignored.",
"$b$b",
" See $b/msg $C HELP <COMMAND>$b for the ",
" exact syntax of each command. ",
"=---------- For more info see: ---------=",
- " http://www.afternet.org/support "
+ " http://www.afternet.org/support ",
+ " http://evilnet.sf.net/x3/x3help.php "
);
"LOGIN" (
" or the shortcut:",
" /AUTH <account> <password>"
);
+"LEVELS" ("/msg $S LEVELS",
+ "Lists the numerical level equivelents for channel access levels.",
+ "$b$b",
+ "$S can use either the names (OWNER, COOWNER, MANAGER, OP, HALFOP, and PAL) or numerical values from 1 to 500 to indicate channel access levels. The LEVELS command prints out all the levels and their numerical ranges.",
+ "Advanced users can change their style with $N's set style command to view the numerical version in commands like USERS, and may use numbers instead of names for fine-tuning access.",
+ "$uSee Also:$u ($N) set style, access, myaccess, adduser");
"MYACCESS" ("/msg $S MYACCESS [<nick|*account>]",
"Lists channels where you have access and infolines in each.",
" o AutoOp is active.",
" v AutoVoice is active.",
" i AutoInvite is active.",
- "$uSee Also:$u access, users");
+ " j AutoJoin is active.",
+ "$uSee Also:$u access, users, levels");
+
"ACCESS" ("/msg $S ACCESS <#channel> [<nick|*account>]",
"Reports various pieces of information about a channel user, including channel and network access level, and the user's info line. If no nick or account is provided, $S returns your own information.",
- "$uSee Also:$u myaccess, users");
+ "$uSee Also:$u myaccess, users, levels");
+
"ADDLAMER" ("/msg $C ADDLAMER <#channel> <mask|nick> [Reason]",
"Adds a lamer to the channels lamer list, remaining in effect until removed with the DELLAMER command. ",
"Lamers are nick!user@host masks which $C watches for, and keeps out of your channel.",
"If it exactly matches an existing lamer already in the list, the reason will be updated. If the existing lamer was a timed lamer, it will be extended into a permanent lamer.",
"$uSee Also:$u llist, dellamer, mdellamer");
-"ADDUSER" ("/msg $C ADDUSER <#channel> <nick|*account> <level>",
+
+"ADDUSER" ("/msg $C ADDUSER <#channel> <nick|*account> <level> [duration]",
"This command adds someone to the channel user list with the specified access level. (You may only add users to levels less than your own.)",
- "The level may be one of $bpeon$b, $bop$b, $bmanager$b, $bcoowner$b, $bowner$b, or a number between 1 and 500. Only network staff may add level 500 users (owners).",
- "$uSee Also:$u deluser, users");
-"ADDOP" ("/msg $C ADDOP <#channel> <nick|*account>",
+ "The level may be one of $bpal$b, $bop$b, $bmanager$b, $bcoowner$b, $bowner$b, or a number between 1 and 500. Only network staff may add level 500 users (owners).",
+ "An optional duration can be specified, if specified then the after the given duration has expired the person will be automatically removed from the channel.",
+ "$uSee Also:$u deluser, users, levels, durations");
+
+"ADDPAL" ("/msg $C ADDPAL <#channel> <nick|*account> [duration]",
+ "This command adds someone to the channel user list with hPAL access level. (You may only add users to levels less than your own.)",
+ "An optional duration can be specified, if specified then the after the given duration has expired the person will be automatically removed from the channel.",
+ "$uSee Also:$u adduser, deluser, users, durations");
+
+"ADDOP" ("/msg $C ADDOP <#channel> <nick|*account> [duration]",
"This command adds someone to the channel user list with OP access level. (You may only add users to levels less than your own.)",
- "$uSee Also:$u adduser, deluser, users");
-"ADDHOP" ("/msg $C ADDHOP <#channel> <nick|*account>",
+ "An optional duration can be specified, if specified then the after the given duration has expired the person will be automatically removed from the channel.",
+ "$uSee Also:$u adduser, deluser, users, durations");
+
+"ADDHOP" ("/msg $C ADDHOP <#channel> <nick|*account> [duration]",
"This command adds someone to the channel user list with HALFOP access level. (You may only add users to levels less than your own.)",
- "$uSee Also:$u adduser, deluser, users");
+ "An optional duration can be specified, if specified then the after the given duration has expired the person will be automatically removed from the channel.",
+ "$uSee Also:$u adduser, deluser, users, durations");
+
+"ADDMANAGER" ("/msg $C ADDMANAGER <#channel> <nick|*account> [duration]",
+ "This command adds someone to the channel user list with MANAGER access level. (You may only add users to levels less than your own.)",
+ "An optional duration can be specified, if specified then the after the given duration has expired the person will be automatically removed from the channel.",
+ "$uSee Also:$u adduser, deluser, users, durations");
+
+"ADDCOOWNER" ("/msg $C ADDCOOWNER <#channel> <nick|*account> [duration]",
+ "This command adds someone to the channel user list with COOWNER access level. (You may only add users to levels less than your own.)",
+ "An optional duration can be specified, if specified then the after the given duration has expired the person will be automatically removed from the channel.",
+ "$uSee Also:$u adduser, deluser, users, durations");
+
"ADDTIMEDLAMER" ("/msg $C ADDTIMEDLAMER <#channel> <mask|nick> <Duration> [Reason]",
"Adds an automatically expiring lamer to the channel lamer list.",
"This command behaves in the exact same fashion as $bADDLAMER$b with the exception that the lamers are automatically removed after the user-supplied duration. ",
"For example: CALC sqrt [5 + .43 * (tan[75])] / 2",
"If you do not have access in the channel, the answer may be reported",
"to you privately (via MSG or NOTICE) instead of in the channel.",
- "CALC can be used by all users.",
"$uSee Also:$u dice, 8ball");
+"8BALL" ("/msg $C 8BALL [yes no question|what color is..|how many..|where is..]?",
+ "8BALL answers yes or no questions, color queistions, numerical questions, and location questions.",
+ "If you do not have access in the channel, the answer may be reported to you privately instead of in the channel.",
+ "$uSee Also:$u dice, calc");
+"ROULETTE" ("/msg $C ROULETTE",
+ "ROULETTE loads the gun for a game of russion roulette. Use FIRE to shoot it",
+ "$uSee Also:$u fire, spin");
+"FIRE" ("/msg $C FIRE",
+ "FIRE the gun (after you load it with ROULETTE). WARNING: this may kill you.",
+ "$uSee Also:$u roulette, spin");
+"SPIN" ("/msg $C SPIN",
+ "This plas a game of Wheel-Of-Misfortune. WARNING: this will result in serious injury or death. Do not play this game if you are faint of heart!",
+ "$uSee Also:$u roulette");
"CLIST" ("/msg $C CLIST <#channel> [mask]",
"This command lists all users of level $bCoowner$b on a channel's userlist. If a mask is supplied, only coowners matching the mask will be shown.",
"$uSee Also:$u addcoowner, delcoowner, mdelcoowner, users");
-"CLVL" ("/msg $C CLVL <#channel> <nick|*account> <level>",
+"CLVL" ("/msg $C CLVL <#channel> <nick|*account> <level> [duration]",
"Modifies a channel user's access level. You cannot give users access greater than or equal to your own.",
"You may use *Account instead of Nick as the name argument; the * makes $C use the name of a account directly (useful if the user is not online).",
- "$uSee Also:$u access, users, giveownership");
+ "An optional duration can be specified, if specified then the after the given duration has expired the person will be automatically reverted back to their previous access level.",
+ "$uSee Also:$u access, users, giveownership, durations");
"CREATENOTE" ("/msg $S CREATENOTE <typename> <set-access> [access-arg] <view-access> <max-length>",
"Defines a new note type. $btypename$b is the name of the note type. $bset-access$b is one of:",
" $bPRIVILEGED$b with required $baccess-arg$b being the minimum OpServ level to set",
"$uSee Also:$u down, hop");
"DEVOICE" ("/msg $C DEVOICE <#channel> <nick> [nick]...",
"This command will make $C devoice the selected user[s].",
- "$uSee Also:$u addpeon, delpeon, deop, voice");
+ "$uSee Also:$u addpal, delpal, deop, voice");
"DOWN" ("/msg $C DOWN <#channel>",
"This command will devoice/dehalfop/deop you in the selected channel.",
"$uSee Also:$u downall, up, upall");
"DOWNALL" ("/msg $C DOWNALL",
"Executes the $bdown$b command for each channel you have access to.",
"$uSee Also:$u down, up, upall");
-"DURATIONS" ("[<n>y][<n>M][<n>w][<n>d][<n>h][<n>m][<n>[s]]",
- "There is a standard syntax for durations that let you easily specify longer periods of time. A duration consists of one or more \"duration parts\", which are sequences of digits, separated by duration letters.",
- "The valid duration letters are $by$b (for year, or 365 days), $bM$b (for month, or 31 days), $bw$b (for week, or 7 days), $bd$b (for day, or 24 hours), $bh$b (for hour, or 60 minutes), $bm$b (for minute, or 60 seconds), and $bs$b (for second). We know not all years are 365 days and not all months are 31 days, but we pretend they are for parsing durations.",
- "If the last duration part does not have any letter to indicate the units, seconds are assumed.",
- "$uExamples$u: 1y1M is 365 days plus 31 days; 1y1m is 365 days plus 1 minute; 1h30m45 is ninety minutes and forty-five seconds; and so forth.");
+"DURATIONS" (
+ "This is the syntax used for commands that require time durations. A time duration is made up of numbers and units. Multiple units may be used in a row.",
+ "The valid unit letters are:",
+ "$by$b - years (365 days)",
+ "$bM$b - months (30 days)",
+ "$bw$b - weeks (7 days)",
+ "$bd$b - days (24 hours)",
+ "$bh$b - hours (60 minutes)",
+ "$bm$b - minutes (60 seconds)",
+ "$bs$b - seconds",
+ "If the unit letter is not givin, seconds are assumed.",
+ "$b$b",
+ "$uExamples$u:",
+ "$b5d$b is 5 days.",
+ "$b1y2M$b is 1 year and 2 months (425 days.)",
+ "$b1d1h$b is 1 day and 1 hour (25 hours.)",
+ "$b1h25m30s$b is 1 hour, 25 minutes and 30 seconds."
+ );
"EMOTE" ("/msg $C EMOTE <#channel> <text>",
"Makes $b$C$b send a CTCP ACTION message to the specified channel.",
"$uSee Also:$u say");
"Deletes all halfops with accounts matching the given pattern from the channel user list.");
"MDELMANAGER" ("/msg $C MDELMANAGER <#channel> <pattern>",
"Deletes all managers with accounts matching the given pattern from the channel user list.",
- "$uSee Also:$u mdelban, mdelcoowner, mdelop, mdelowner, mdelpeon");
+ "$uSee Also:$u mdelban, mdelcoowner, mdelop, mdelowner, mdelpal");
"MDELOP" ("/msg $C MDELOP <#channel> <pattern>",
- "Deletes all ops with accounts matching the given pattern from the channel user list.");
+ "Deletes all ops with accounts matching the given pattern from the channel user list.",
+ "$uSee Also:$u addop, mdelowner, mdelcoowner, mdelmanager");
"MDELOWNER" ("/msg $C MDELOWNER <#channel> <pattern>",
"Deletes all owners with accounts matching the given pattern from the channel user list.",
- "$uSee Also:$u addowner, mdelcoowner, mdelmanager, mdelop, mdelpeon");
-"MDELPEON" ("/msg $C MDELPEON <#channel> <pattern>",
- "Deletes all peons with accounts matching the given pattern from the channel user list.",
- "$uSee Also:$u addpeon, mdelcoowner, mdelmanager, mdelop");
+ "$uSee Also:$u addowner, mdelcoowner, mdelmanager, mdelop, mdelpal");
+"MDELPAL" ("/msg $C MDELPAL <#channel> <pattern>",
+ "Deletes all pals with accounts matching the given pattern from the channel user list.",
+ "$uSee Also:$u addpal, mdelcoowner, mdelmanager, mdelop");
"MERGE" ("/msg $C MERGE <#channel> <destination>",
"Merges the source channel's registration, users, lamers, and other data into the target channel. Users with access to both the source and target channels will retain the higher access level; if the access levels are the same, the more recent seen time is kept. Lamers are also merged, with lamers expiring later taking precedence.",
"$uSee Also:$u register, move, unregister");
"$uSee Also:$u note, delnote");
"OLIST" ("/msg $C OLIST <#channel> [mask]",
"This command lists all users of level $bOp$b on a channel's userlist. If a mask is supplied, only ops matching the mask will be shown.",
- "$uSee Also:$u addop, delop, mdelop, users");
+ "$uSee Also:$u addop, deluser, mdelop, users");
"OP" ("/msg $C OP <#channel> <nick> [nick]...",
"This command makes $C op the specified user.",
- "$uSee Also:$u addop, delop, deop");
+ "$uSee Also:$u addop, deluser, deop");
"OPCHAN" ("/msg $C OPCHAN <#channel>",
"This command makes $C op itself in the specified channel.");
"OPEN" ("/msg $C OPEN <#channel>",
"Displays the current topic, modes, and ops of the specified channel. Unlike $binfo$b, $bpeek$b displays channel information unrelated to $b$C$b.",
"$uSee Also:$u info");
"PLIST" ("/msg $C PLIST <#channel>",
- "This command lists all users of level $bPeon$b on a channel's userlist. If a mask is supplied, only peons matching the mask will be shown.",
- "$uSee Also:$u addpeon, delpeon, mdelpeon, users");
+ "This command lists all users of level $bpal$b on a channel's userlist. If a mask is supplied, only pals matching the mask will be shown.",
+ "$uSee Also:$u addpal, delpal, mdelpal, users");
"REGISTER" (
"/msg $C REGISTER <#channel>",
"REMOVENOTE" ("/msg $S REMOVENOTE <typename> [FORCE]",
"Permanently deletes a note type. Without the argument $bFORCE$b, it will only delete an unused note type. With the argument $bFORCE$b, it will delete the note from all channels and then delete the note type.",
"$uSee Also:$u createnote");
+
"RESYNC" ("/msg $S RESYNC <#channel>",
- "Synchronizes users in the channel with the userlist. This means that if the user can normally get ops, $S makes sure the user has ops. Otherwise, if the user normally gets voice, $S makes sure the user has voice but not ops. Otherwise, $S makes sure the user has neither voice nor ops.");
+ "Synchronizes users in the channel with the userlist, according to the SET AUTOMODE setting.",
+ "It will give and take ops, halfops, and voice modes to users to make the channel match the userlist and automode setting.",
+ "$uSee Also:$u set automode, up, op, hop, voice");
+
"SAY" ("/msg $C SAY <#channel> <text>",
"Makes $b$C$b send a message to the specified channel.",
"$uSee Also:$u emote");
"USERGREETING: A greeting message for users on the channel's userlist.",
"MODES: The channel's default modes.",
"PUBCMD: Restrictions to use commands in public.",
- "INVITEME: Minimum level for users to use INVITEME or AUTOINVITE.",
+ "INVITEME: Minimum level for users to use INVITEME, AUTOINVITE or AUTOJOIN.",
"USERINFO: Minimum level for users to show an infoline on join.",
- "ENFOPS: Restrictions for opping users.",
- "ENFHALFOPS: Restrictions for halfopping users.",
- "ENFMODES: Restrictions to change the default modes.",
- "ENFTOPIC: Restrictions on changing the topic.",
+ "ENFOPS: Who can op users.",
+ "ENFHALFOPS: Who can half-op users.",
+ "ENFMODES: Who can change the channel modes.",
+ "ENFTOPIC: Who can chang the topic.",
"TOPICSNARF: Manual topics changes (by /TOPIC) from users this level and above will change the default $b$C$b topic.",
"SETTERS: Who may change channel settings (using $bSET$b).",
- "CTCPUSERS: Who is allowed to send CTCPs to the channel.",
- "CTCPREACTION: What happens when a disallowed CTCP is sent to the channel.",
- "VOICE: Who should be auto-voiced in the channel.",
+ "CTCPREACTION: What happens when a CTCP is sent to the channel.",
+ "AUTOMODE: Who should be auto-voice/hop/oped in the channel.",
+ "BANTIMEOUT: Removes old bans.",
"PROTECT: The protection level $b$C$b provides.",
"TOYS: Toggles how $b$C$b will respond to toy commands (!8ball etc).",
"TOPICREFRESH: Controls if (and how often) $b$C$b will reset the topic.",
+ "RESYNC: Controls if (and how often) $b$C$b will reset the userlist.",
"DYNLIMIT: Adjusts user limit (+l channel mode) to prevent join floods.",
+ "MAXSETINFO: Maximum amount of characters in a SETINFO line.",
"$bIRCOP ONLY$b:",
"NODELETE: Prevents channel deletion.",
"If you wish to reset your channel to the default settings, you can use the $bSET DEFAULTS$b command.",
- "$uSee Also:$u set pubcmd, set enfops, set enfhalfops, set enfmodes, set enftopic, set protect, set toys, set setters, set topicrefresh, set ctcpusers, set ctcpreaction, set defaults");
+ "$uSee Also:$u set pubcmd, set enfops, set enfhalfops, set enfmodes, set enftopic, set protect, set toys, set setters, set topicrefresh, set resync, set ctcpreaction, set maxsetinfo, set defaults");
+
"SET DEFAULTTOPIC" ("/msg $C SET <#channel> DEFAULTTOPIC <New default topic>",
"This changes the default topic for the channel. $C will set the IRC topic to this value when the $btopic$b command is used with no arguments, when the topic refresh happens (if you have $bset topicrefresh$b), or when an unauthorized user changes the topic to something else.",
"$uSee Also:$u set, set topicrefresh, set enftopic, set topicmask");
+
"SET TOPICMASK" ("/msg $C SET <#channel> TOPICMASK <Topic mask with * and ?>",
"This sets a pattern that $C forces all topics to match. A $b*$b will match any number of characters (including 0); a $b?$b will match any single character -- the same as with IRC hostmasks.",
"For example, $b!set topicmask Hello *$b allows the topic to be set to $bHello world$b, but not $bGoodbye world$b.",
" $btopic something$b",
"will replace the * with the text $bsomething$b.",
"$uSee Also:$u set, set topic, set enftopic");
+
"SET TOYS" ("/msg $C SET <#channel> TOYS <value>",
"This setting changes how $C will respond to commands like 8ball, or whether it responds at all. Valid settings are:",
"$b0$b Toys are completely disabled.",
"$b1$b Toys will only reply privately.",
"$b2$b Toys will reply publicly.",
"$uSee Also:$u set");
+
"SET PUBCMD" ("/msg $C SET <#channel> PUBCMD <value>",
"This setting restricts the access necessary to use in-channel commands. It is a numeric user level, or 501 to mean no one may use public commands.",
"$uSee Also:$u set");
+
"SET ENFOPS" ("/msg $C SET <#channel> ENFOPS <value>",
- "This setting restricts who may op users who are not at least ops on the userlist. If $C sees someone with access below the specified access op someone not on the userlist (or who is a peon), it will deop the second user. It is a numeric user level, or 501 to mean no one may op unrecognized users.",
+ "This setting restricts who may op users who are not at least ops on the userlist. If $C sees someone with access below the specified access op someone not on the userlist (or who is a pal), it will deop the second user. It is a numeric user level, or 501 to mean no one may op unrecognized users.",
"$uSee Also:$u set");
+
"SET ENFHALFOPS" ("/msg $C SET <#channel> ENFHALFOPS <value>",
- "This setting restricts who may halfop users who are not at least halfops on the userlist. If $C sees someone with access below the specified access halfop someone not on the userlist (or who is a peon), it will dehalfop the second user. It is a numeric user level, or 501 to mean no one may op unrecognized users.",
- "$uSee Also:$u set");
-"SET GIVEOPS" ("/msg $C SET <#channel> GIVEOPS <value>",
- "This setting restricts the minimum access someone must be to be automatically op'ed by $C. It is a numeric user level.",
- "$uSee Also:$u set");
-"SET GIVEHOPS" ("/msg $C SET <#channel> GIVEHOPS <value>",
- "This setting restricts the minimum access someone must be to be automatically halfop'ed by $C. It is a numeric user level.",
+ "This setting restricts who may halfop users who are not at least halfops on the userlist. If $C sees someone with access below the specified access halfop someone not on the userlist (or who is a pal), it will dehalfop the second user. It is a numeric user level, or 501 to mean no one may op unrecognized users.",
"$uSee Also:$u set");
+
"SET ENFMODES" ("/msg $C SET <#channel> ENFMODES <value>",
"This setting restricts the minimum access someone must have to change the channel modes from what is specified in the channel settings. It is a numeric user level, or 501 to mean no one may override the default modes.",
"$uSee Also:$u set");
+
"SET ENFTOPIC" ("/msg $C SET <#channel> ENFTOPIC <value>",
"This setting restricts the minimum access someone must have to change the channel topic. It is a numeric user level, or 501 to mean no one may override the default topic.",
"If a topic mask is set, then a person may change the topic as long as it matches that mask $bor$b they have the above access.",
"If no topic mask is set, then a person must have the above access to change the topic from the default.",
"$uSee Also:$u set, set topic, set topicmask");
-"SET VOICE" ("/msg $C SET <#channel> VOICE <value>",
- "This setting configures who $C auto-voices. Valid settings are:",
- "$b0$b Noone will get voice",
- "$b1$b PEONs will get voice (default).",
- "$b2$b Everyone will get voice.",
- "$uSee Also:$u set, uset autoop");
+
+"SET MAXSETINFO" ("/msg $C SET <$channel> MAXSETINFO <value>",
+ "This setting restricts the length of user info lines.",
+ "$uSee Also:$u set");
+
+"SET AUTOMODE" ("/msg $C SET <#channel> AUTOMODE <value>",
+ "This setting configures who $C gives different channel modes to on join or RESYNC. ",
+ "Valid settings are:",
+ " $b0$b Noone will be automatically oped, half-oped, or voiced.",
+ " $b1$b Give voice to pals, half-op to halfops, and op to ops.",
+ " $b2$b #1 Plus Give voice to everyone.",
+ " $b3$b #1 Plus give halfops to everyone.",
+ " $b4$b #1 Plus give ops to everyone (not advised.)",
+ " $b5$b Give half-op to halfops, and op to ops only, but pals do not get voice. ",
+ "$uSee Also:$u set, up, uset autoop, resync");
+
+"SET BANTIMEOUT" ("/msg $C SET <#channel> BANTIMEOUT <value>",
+ "This setting configures $C to automatically remove bans older than the set age. It is useful for avoiding buildup of old bans, eventually running out of ban slots.",
+ "Valid settings are:",
+ " $b0$b Does not remove bans",
+ " $b1$b Bans will be removed after 10 minutes",
+ " $b2$b Bans will be removed after 2 hours",
+ " $b3$b Bans will be removed after 4 hours",
+ " $b4$b Bans will be removed after 24 hours",
+ " $b5$b Bans will be removed after 1 week",
+ "It should be noted that this setting expires channel bans (mode +b) NOT perminantly banned \"LAMERs\", although it will expire the individual host-bans $C sets on those who match LAMER entries.",
+ "$uSee Also:$u unban, addlamer, addtimedlamer");
+
"SET PROTECT" ("/msg $C SET <#channel> PROTECT <value>",
"This setting restricts the protection that $C enforces. Valid settings are:",
"$b0$b Non-users and users will be protected from those of equal or lower access",
"$b2$b Users will be protected from those of lower access.",
"$b3$b No users will be protected.",
"$uSee Also:$u set");
+
"SET SETTERS" ("/msg $C SET <#channel> SETTERS <value>",
"Users with at least this user level can use the $bset$b command for $C.",
"$uSee Also:$u set");
+
"SET TOPICREFRESH" ("/msg $C SET <#channel> TOPICREFRESH <value>",
"This setting controls if (and how often) $C refreshes the topic to the default value. Valid settings are:",
"$b0$b Never refresh topic.",
"$b3$b Refresh every 12 hours.",
"$b4$b Refresh every 24 hours.",
"$uSee Also:$u set, set topic");
-"SET CTCPUSERS" ("/msg $C SET <#channel> CTCPUSERS <value>",
- "This setting controls who is allowed to send CTCPs to the channel. CTCP ACTION, the way that /me is implemented, are always allowed. For any other CTCP, the user must have this access level. 501 indicates no users may use CTCPs in the channel.",
- "If a user below the specified level sends a CTCP (besides ACTION) to the channel, the enforcement is specified by the $bCTCPReaction$b setting.",
- "$uSee Also:$u set, set ctcpreaction");
+
+"SET RESYNC" ("/msg $C SET <#channel> RESYNC <value>",
+ "This setting controls if (and how often) $C refreshes the userlist to the current list. Valid settings are:",
+ "$b0$b Never refresh userlist.",
+ "$b1$b Refresh every 3 hours.",
+ "$b2$b Refresh every 6 hours.",
+ "$b3$b Refresh every 12 hours.",
+ "$b4$b Refresh every 24 hours.",
+ "$uSee Also:$u set");
+
"SET CTCPREACTION" ("/msg $C SET <#channel> CTCPREACTION <value>",
"This setting controls what happens to those who send disallowed CTCPs to the channel:",
- "$b0$b Kick on disallowed CTCPs.",
- "$b1$b Kickban on disallowed CTCPs.",
- "$b2$b Short timed ban (defaults to 3 minutes) on disallowed CTCPs.",
- "$b3$b Long timed ban (defaults to 1 hour) on disallowed CTCPs.",
- "$uSee Also:$u set, set ctcpusers");
+ "$b0$b CTCPs are allowed. Do nothing.",
+ "$b1$b Kick on disallowed CTCPs.",
+ "$b2$b Kickban on disallowed CTCPs.",
+ "$b3$b Short timed ban (defaults to 3 minutes) on disallowed CTCPs.",
+ "$b4$b Long timed ban (defaults to 1 hour) on disallowed CTCPs.",
+ "$uSee Also:$u set");
+
"SET DEFAULTS" ("/msg $C SET <#channel> DEFAULTS [<confirmation>]",
"With the proper confirmation string, resets all the options for the channel to their default values.",
"With no confirmation string, displays the appropriate confirmation string.",
"$uSee Also:$u set");
+
+"SET GREETING" ("/msg $C SET <#channel> GREETING <message>",
+ "Sets a message X3 will send to everyone who joins your channel, unless they are on your userlist.",
+ "This feature should be used sparingly, as many people find it annoying.",
+ "Another set command, SET USERGREETING, is shown to people who ARE on your userlist.",
+ "$uSee Also:$u set usergreeting");
+
+"SET USERGREETING" ("/msg $C SET <#channel> USERGREETING <message>",
+ "Sets a message X3 will send to your users (PALs, OPs, etc) when they join your channel.",
+ "This feature should be used sparingly, as many people find it annoying.",
+ "Another set command, SET GREETING, is shown to people who are NOT on your userlist.",
+ "$uSee Also:$u set greeting");
+
"STAFF" ("/msg $C STAFF",
"Lists all the IRC operators and helpers currently online. Nicknames enclosed in parentheses are away, and likely unavailable.",
"$uSee Also:$u helpers, ircops, netinfo");
-"SUSPEND" ("/msg $C SUSPEND <#channel> <nick|*account>",
+
+"SUSPEND" ("/msg $C SUSPEND <#channel> <nick|*account> <duration>",
"This disables the target's access to the channel. That access can be restored using the unsuspend command.",
- "$uSee Also:$u unsuspend, deluser");
+ "The duration may be \"0\" to make it never expire; otherwise, $C will automatically unsuspend the user after the duration",
+ "$uSee Also:$u durations, unsuspend, deluser");
+
"TOPIC" ("/msg $C TOPIC <#channel> [topic]",
"Sets the current topic for the specified channel. If no topic is specified, then set the current topic to the default topic.");
-"TRIM" ("/msg $C TRIM <#channel> <target> <duration>",
+
+"TRIM" ("/msg $C TRIM <#channel> <target> <duration> [vacation]",
"The trim command removes target objects inactive for more than a certain duration from a channel. The target must be a channel access level, a range of access levels (for example, \"300-399\"), \"users\" or \"lamers\". The duration argument specifies the amount of time the target has been inactive for to be removed.",
+ "If the vacation argument is given for the users target, users who are on vacation will be trimmed. By default they are skipped.",
"$uSee Also:$u durations");
+
"UNBAN" ("/msg $C UNBAN <#channel> <mask|nick>",
"Unbans the specified nick or hostmask. If a nick is given, $b$C$b determines what hostmask(s) to unban.",
"$uSee Also:$u ban, kick, kickban");
+
"UNBANALL" ("/msg $C UNBANALL <#channel>",
"Clears the specified channel's banlist. If the channel is omitted, then $bunbanall$b will be done in the channel where the command was given.",
"$uSee Also:$u ban, unban, unbanme");
"Displays up to a certain limit, all channels registered with $b$C$b that have not been visited within a certain duration. If a duration is not provided, a default will be used.",
"$uSee Also:$u expire, search, durations");
"UP" ("/msg $C UP <#channel>",
- "Grants you your normal channel privileges. Ops for OPs, HalfOps for HALFOPs, and Voice for PEONs.");
+ "Grants you your normal channel privileges. Ops for OPs, HalfOps for HALFOPs, and Voice for PALs.");
"UPALL" ("/msg $C UPALL",
"Executes the $bup$b command for each channel you have access in.",
"$uSee Also:$u up, down, downall");
"INFO: Sets the infoline that $C sends when you join the channel.",
"AUTOOP: Enable or disable $C automatically opping you upon joining or authenticating.",
"AUTOINVITE: $C will invite you to this channel if you have access to and are not in when you authenticate if this setting is on.",
+ "AUTOJOIN: $C will forcibly join you into this channel if you have access to and are not in it when you authenticate if this setting is on.",
"$uSee Also:$u set");
"USET INFO" ("/msg $C USET <#channel> INFO <info>",
"This command will set a user defined information message to be displayed when you join the channel. Set to '*' to clear the message.",
"$uSee Also:$u addcoowner, delcoowner, mdelcoowner, users");
"ME" "I am at your service. /msg $C help command, or /join #help ";
+
"thanks" ("AfterNET's own X3 is based on the hard work of the origional srvx developers. They would like to thank the following people for their help in making the origional srvx:",
" $bGameSurge IRC Network$b - All the users and staff there bear with our shortcomings and bugs and let us know what needs to be fixed.",
" $bIC5 Networks$b (and JohnM in particular) - Never afraid to critique things, even if we are the 800 pound gorilla.",
"Futher, the X3 team would like to thank:",
" $breed$b - who tirelessly nagged us to upgrade our services",
"$bAfterNET Users and Opers$b - who faught both for and against the change, for the better of Afternet.");
+
+"MODES" (
+ "/msg $C HELP MODES <option>",
+ "This command will return information for either:",
+ "CHANNEL: Channel mode(s).",
+ "USER: User mode(s).",
+ "$b$b",
+ "See MODES USER, and MODES CHANNEL for the meaning of modes.",
+ "$uSee also:$u set",
+ );
+
+"MODES USER" (
+ "*a - IRC administrator.",
+ " d - Deaf mode. All #channel messages are ignored.",
+ "*f - Fake host mode. ($bInvisible mode, will not be visibly set. Can only be set by a U:lined service.$b)",
+ " g - Allows you to see desynch wallops.",
+ "*h - Sethost mode. ($bInvisible mode, will not be visibly set.$b)",
+ " i - Invisible. A user will not be able to see you in /names or /who list(s). They $bmust$b know your exact nick.",
+ " k - Network service. You cannot be deopped, kicked or killed.",
+ "*n - Channels will not be shown in a user(s) /whois reply.",
+ " o - Global IRC operator.",
+ " r - Registered user. ($bInvisible mode, will not be visibly set. Can only be set by a U:lined service.$b)",
+ " s - Server notices.",
+ " w - See wallops and wallusers messages.",
+ " x - Real host will be obfuscated if authed to $N. ($bFixed mode, cannot be unset.$b)",
+ "*B - User is a bot.",
+ "*I - Idle time will not be shown in a user(s) /whois reply.",
+ "*O - Local IRC operator. ($bDeprecated and disabled. *ALL* IRC operators are global.$b)",
+ "*R - Only registered user(s) are allowed to message you.",
+ "*W - /whois paranoia. IRC operators are informed of a /whois taking place on them. ($bDisabled.$b)",
+ "*X - Extra oper. Gives extra abilities and privileges to IRC operators.",
+ "$b$b",
+ "$bNote:$b * indicates that the mode is only available on some networks."
+ );
+
+"MODES CHANNEL" (
+ "*a - IRC administrators only. ($bCan only be set by IRC administrators/operators. Can be overriden by /invite.$b)",
+ " b - Bans a user from a channel. ($bCan be overriden by /invite.$b)",
+ "*c - Incoming colour messages to the channel are blocked.",
+ "*e - Excludes a user from being banned from a channel. If they're +b'd and +e'd, they will still be able to join.",
+ "*h - Gives a user hop status. ($b%%$b)",
+ " i - Invite only. A user must be /invite'd to the channel in order to join.",
+ " k - Channel requires a key in order to join. ($bCan be overriden by /invite.$b)",
+ " l - Limit. Only a certain number of user(s) are allowed to join the channel. ($bCan be overriden by /invite.$b)",
+ " m - Moderated. Nobody other than hops ($b%%$b), ops ($b@$b) or voices ($b+$b) can talk.",
+ " n - All external messages will be blocked. ($bMust be in the channel in order to talk.$b)",
+ " o - Gives a user op status. ($b@$b)",
+ " p - Private. The channel will not appear in /list but will appear in /whois replies.",
+ " r - A user must be registered in order to join the channel. ($bCan be overriden by /invite.$b)",
+ " s - Secret. The channel will not appear in /list and /whois replies.",
+ " t - Only op(s) can change the topic.",
+ " v - Gives a user voice status. ($b+$b)",
+ "*z - Persistant channel. Once the last user has left, the channel will not be destroyed. ($bDisabled.$b)",
+ "*C - /ctcp messages to the channel are blocked.",
+ "*L - Mode(s) will not be displayed in /list.",
+ "*M - Only registered user(s) are allowed to talk in a channel. (Excludes hops ($b%%$b), ops ($b@$b) and voices. ($b+$b))",
+ "*N - /notices to the channel are blocked.",
+ "*O - IRC operators only. ($bCan only be set by either $C or IRC adminstrators/operators. Can be overriden by /invite.$b)",
+ "*Q - Part and quit messages will not be displayed in a channel.",
+ "*S - Bold, colour, reverse and underline code(s) are stripped from incoming messages.",
+ "*T - /amsgs to the channel are blocked.",
+ "*Z - SSL user(s) only. ($bCan only be set by either $C or those on an SSL connection.$b)",
+ "$b$b",
+ "$bNote:$b * indicates that the mode is only available on some networks."
+ );