" $bUNBANALL$b Remove all bans from a channel.",
" $bINVITE$b Admit a user to pass through +ib modes in your channel.",
"$b$b",
- " $bINFO$b Show numerical information about the users in a channel.",
+ " $bINFO$b Show information about a channel.",
" $bEVENTS$b View a list of events relevant to a channel."
);
"INFORMATION" ("$bInformative Commands:$b",
" $bIRCOPS$b Get a list of all the current IRC operators.",
" $bHELPERS$b Get a list of all the current support helpers.",
" $bPEEK$b Reveal information on a channel's modes, topic and ops.",
- " $bCOMMAND$b Display some information about a command."
+ " $bCOMMAND$b Display some information about a command.",
+ " $bINFO$b Gets channel information about a channel.",
+ " $bEVENTS$b View a list of events relevant to a channel.",
+ " $b$b ",
+ " $bUSERS$b Show the channels userlist.",
+ " $bCLIST$b Show all COOWNERs of a channel.",
+ " $bMLIST$b Show all MANAGERs of a channel.",
+ " $bOLIST$b Show all OPs of a channel.",
+ " $bHLIST$b Show all HALFOPs of a channel.",
+ " $bPLIST$b Show all PEONs of a channel.",
+ " $bLAMERS$b Show all LAMERs of a channel.",
+ " $bACCESS$b Check someone's access level in a channel.",
+ " $bMYACCESS$b Show all channels where you have access.",
);
"OPER" ("$bHelper/IRC Operator commands:$b",
" $bGOD$b Turn security override on/off.",
" in a channel which $C is in. These two ",
" ways are demonstrated below:",
" $b/MSG $C OP #chatzone Locke$b",
- " $b,OP #chatzone locke$b",
+ " $b.OP #chatzone locke$b",
"$b$b",
" If a command is given in a channel, and ",
" the channel parameter is not given, the ",
" o AutoOp is active.",
" v AutoVoice is active.",
" i AutoInvite is active.",
+ " j AutoJoin is active.",
"$uSee Also:$u access, users");
"ACCESS" ("/msg $S ACCESS <#channel> [<nick|*account>]",
"Reports various pieces of information about a channel user, including channel and network access level, and the user's info line. If no nick or account is provided, $S returns your own information.",
"USERGREETING: A greeting message for users on the channel's userlist.",
"MODES: The channel's default modes.",
"PUBCMD: Restrictions to use commands in public.",
- "INVITEME: Minimum level for users to use INVITEME or AUTOINVITE.",
+ "INVITEME: Minimum level for users to use INVITEME, AUTOINVITE or AUTOJOIN.",
"USERINFO: Minimum level for users to show an infoline on join.",
"ENFOPS: Who can op users.",
"ENFHALFOPS: Who can half-op users.",
"SETTERS: Who may change channel settings (using $bSET$b).",
"CTCPREACTION: What happens when a CTCP is sent to the channel.",
"AUTOMODE: Who should be auto-voice/hop/oped in the channel.",
+ "BANTIMEOUT: Removes old bans.",
"PROTECT: The protection level $b$C$b provides.",
"TOYS: Toggles how $b$C$b will respond to toy commands (!8ball etc).",
"TOPICREFRESH: Controls if (and how often) $b$C$b will reset the topic.",
+ "RESYNC: Controls if (and how often) $b$C$b will reset the userlist.",
"DYNLIMIT: Adjusts user limit (+l channel mode) to prevent join floods.",
"$bIRCOP ONLY$b:",
"NODELETE: Prevents channel deletion.",
"If you wish to reset your channel to the default settings, you can use the $bSET DEFAULTS$b command.",
- "$uSee Also:$u set pubcmd, set enfops, set enfhalfops, set enfmodes, set enftopic, set protect, set toys, set setters, set topicrefresh, set ctcpreaction, set defaults");
+ "$uSee Also:$u set pubcmd, set enfops, set enfhalfops, set enfmodes, set enftopic, set protect, set toys, set setters, set topicrefresh, set resync, set ctcpreaction, set defaults");
"SET DEFAULTTOPIC" ("/msg $C SET <#channel> DEFAULTTOPIC <New default topic>",
"This changes the default topic for the channel. $C will set the IRC topic to this value when the $btopic$b command is used with no arguments, when the topic refresh happens (if you have $bset topicrefresh$b), or when an unauthorized user changes the topic to something else.",
" $b5$b Give half-op to halfops, and op to ops only, but peons do not get voice. ",
"$uSee Also:$u set, up, uset autoop, resync");
+"SET BANTIMEOUT" ("/msg $C SET <#channel> BANTIMEOUT <value>",
+ "This setting configures $C to automatically remove bans older than the set age. It is useful for avoiding buildup of old bans, eventually running out of ban slots.",
+ "Valid settings are:",
+ " $b0$b Does not remove bans",
+ " $b1$b Bans will be removed after 10 minutes",
+ " $b2$b Bans will be removed after 2 hours",
+ " $b3$b Bans will be removed after 4 hours",
+ " $b4$b Bans will be removed after 24 hours",
+ " $b5$b Bans will be removed after 1 week",
+ "It should be noted that this setting expires channel bans (mode +b) NOT perminantly banned \"LAMERs\", although it will expire the individual host-bans $C sets on those who match LAMER entries.",
+ "$uSee Also:$u unban, addlamer, addtimedlamer");
+
"SET PROTECT" ("/msg $C SET <#channel> PROTECT <value>",
"This setting restricts the protection that $C enforces. Valid settings are:",
"$b0$b Non-users and users will be protected from those of equal or lower access",
"$b4$b Refresh every 24 hours.",
"$uSee Also:$u set, set topic");
+"SET RESYNC" ("/msg $C SET <#channel> RESYNC <value>",
+ "This setting controls if (and how often) $C refreshes the userlist to the current list. Valid settings are:",
+ "$b0$b Never refresh userlist.",
+ "$b1$b Refresh every 3 hours.",
+ "$b2$b Refresh every 6 hours.",
+ "$b3$b Refresh every 12 hours.",
+ "$b4$b Refresh every 24 hours.",
+ "$uSee Also:$u set");
+
"SET CTCPREACTION" ("/msg $C SET <#channel> CTCPREACTION <value>",
"This setting controls what happens to those who send disallowed CTCPs to the channel:",
"$b0$b CTCPs are allowed. Do nothing.",
"With no confirmation string, displays the appropriate confirmation string.",
"$uSee Also:$u set");
+"SET GREETING" ("/msg $C SET <#channel> GREETING <message>",
+ "Sets a message X3 will send to everyone who joins your channel, unless they are on your userlist.",
+ "This feature should be used sparingly, as many people find it annoying.",
+ "Another set command, SET USERGREETING, is shown to people who ARE on your userlist.",
+ "$uSee Also:$u set usergreeting");
+
+"SET USERGREETING" ("/msg $C SET <#channel> USERGREETING <message>",
+ "Sets a message X3 will send to your users (PEONs, OPs, etc) when they join your channel.",
+ "This feature should be used sparingly, as many people find it annoying.",
+ "Another set command, SET GREETING, is shown to people who are NOT on your userlist.",
+ "$uSee Also:$u set greeting");
+
"STAFF" ("/msg $C STAFF",
"Lists all the IRC operators and helpers currently online. Nicknames enclosed in parentheses are away, and likely unavailable.",
"$uSee Also:$u helpers, ircops, netinfo");
-"SUSPEND" ("/msg $C SUSPEND <#channel> <nick|*account>",
+"SUSPEND" ("/msg $C SUSPEND <#channel> <nick|*account> <duration>",
"This disables the target's access to the channel. That access can be restored using the unsuspend command.",
- "$uSee Also:$u unsuspend, deluser");
+ "The duration may be \"0\" to make it never expire; otherwise, $C will automatically unsuspend the user after the duration",
+ "$uSee Also:$u durations, unsuspend, deluser");
"TOPIC" ("/msg $C TOPIC <#channel> [topic]",
"Sets the current topic for the specified channel. If no topic is specified, then set the current topic to the default topic.");
-"TRIM" ("/msg $C TRIM <#channel> <target> <duration>",
+"TRIM" ("/msg $C TRIM <#channel> <target> <duration> [vacation]",
"The trim command removes target objects inactive for more than a certain duration from a channel. The target must be a channel access level, a range of access levels (for example, \"300-399\"), \"users\" or \"lamers\". The duration argument specifies the amount of time the target has been inactive for to be removed.",
+ "If the vacation argument is given for the users target, users who are on vacation will be trimmed. By default they are skipped.",
"$uSee Also:$u durations");
"UNBAN" ("/msg $C UNBAN <#channel> <mask|nick>",
"INFO: Sets the infoline that $C sends when you join the channel.",
"AUTOOP: Enable or disable $C automatically opping you upon joining or authenticating.",
"AUTOINVITE: $C will invite you to this channel if you have access to and are not in when you authenticate if this setting is on.",
+ "AUTOJOIN: $C will forcibly join you into this channel if you have access to and are not in it when you authenticate if this setting is on.",
"$uSee Also:$u set");
"USET INFO" ("/msg $C USET <#channel> INFO <info>",
"This command will set a user defined information message to be displayed when you join the channel. Set to '*' to clear the message.",