X-Git-Url: https://jfr.im/git/solanum.git/blobdiff_plain/98c645cadb1ae46f2e77a2cf0b5391b13ab10f34..22ebfd257e7f6959dda7253f8f39d27e8c118924:/doc/reference.conf diff --git a/doc/reference.conf b/doc/reference.conf old mode 100755 new mode 100644 index 894c284f..368c5a70 --- a/doc/reference.conf +++ b/doc/reference.conf @@ -1,4 +1,4 @@ -/* doc/reference.conf - charybdis Example configuration file +/* doc/reference.conf - solanum example configuration file * * Copyright (C) 2000-2002 Hybrid Development Team * Copyright (C) 2002-2005 ircd-ratbox development team @@ -6,7 +6,6 @@ * * Written by ejb, wcampbel, db, leeh and others * - * $Id: reference.conf 3582 2007-11-17 21:55:48Z jilles $ */ /* IMPORTANT NOTES: @@ -27,82 +26,90 @@ * .include "filename" * .include * + * Flags variables are comma-separated sets of predefined values, + * specific to each block. For example in operator {} blocks: + * flags = encrypted, encrypted; + * * Times/durations are written as: * 12 hours 30 minutes 1 second - * + * * Valid units of time: * month, week, day, hour, minute, second * * Valid units of size: * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte * - * Sizes and times may be singular or plural. - */ + * Sizes and times may be singular or plural. + */ /* Extensions: * * Charybdis contains several extensions that are not enabled by default. * To use them, uncomment the lines below. * - * Channel mode +-A (admin only) -- chm_adminonly.so - * Channel mode +-O (oper only) -- chm_operonly.so - * Channel mode +-S (ssl only) -- chm_sslonly.so - * Emulates channel mode +-O (oper only) (+-iI $o) -- chm_operonly_compat.so - * Emulates channel mode +-R (quiet unreg) (+-q $~a) -- chm_quietunreg_compat.so - * Emulates channel mode +-S (ssl only) (+-b $~z) -- chm_sslonly_compat.so - * Restrict channel creation to logged in users -- createauthonly.so - * Account bans (+b $a[:mask]) -- extb_account.so - * Banned from another channel (+b $j:mask) -- extb_canjoin.so - * Other-channel bans (+b $c:mask) -- extb_channel.so - * Combination extbans -- extb_combi.so - * Extended ban (+b $x:mask) -- extb_extgecos.so - * Hostmask bans (for combination extbans) -- extb_hostmask.so - * Oper bans (+b $o) -- extb_oper.so - * Realname (gecos) bans (+b $r:mask) -- extb_realname.so - * Server bans (+b $s:mask) -- extb_server.so - * SSL bans (+b $z) -- extb_ssl.so - * HURT system -- hurt.so - * New host mangling (umode +x) -- ip_cloaking_4.0.so - * Old host mangling (umode +h) -- ip_cloaking.so - * Find channel forwards -- m_findforwards.so - * /identify support -- m_identify.so - * Opers cannot be invisible (umode +i) -- no_oper_invis.so - * Far connection notices (snomask +F) -- sno_farconnect.so - * Remote k/d/x line active notices -- sno_globalkline.so - * Remote oper up notices -- sno_globaloper.so - * /whois notifications (snomask +W) -- sno_whois.so - * Oper-override (modehacking only) -- override.so - * Stop services kills -- no_kill_services.so + * Channel mode +-A (admin only) -- chm_adminonly + * Channel mode +-T (blocks notices) -- chm_nonotice + * Channel mode +-O (oper only) -- chm_operonly + * Channel mode +-S (ssl only) -- chm_sslonly + * Channel mode +-M (disallow KICK on IRC ops) -- chm_operpeace + * Restrict channel creation to logged in users -- createauthonly + * Account bans (+b $a[:mask]) -- extb_account + * Banned from another channel (+b $j:mask) -- extb_canjoin + * Other-channel bans (+b $c:mask) -- extb_channel + * Combination extbans -- extb_combi + * Extended ban (+b $x:mask) -- extb_extgecos + * Hostmask bans (for combination extbans) -- extb_hostmask + * Oper bans (+b $o) -- extb_oper + * Realname (gecos) bans (+b $r:mask) -- extb_realname + * Server bans (+b $s:mask) -- extb_server + * SSL bans (+b $z) -- extb_ssl + * User mode bans (+b $u:modes) -- extb_usermode + * Helpops system (umode +h) -- helpops + * HURT system -- hurt + * New host mangling (umode +x) -- ip_cloaking_4.0 + * Old host mangling (umode +h) -- ip_cloaking + * Dynamically extend channel limits -- m_extendchans + * Find channel forwards -- m_findforwards + * /identify support -- m_identify + * /locops support -- m_locops + * Opers cannot be invisible (umode +i) -- no_oper_invis + * Far connection notices (snomask +F) -- sno_farconnect + * Remote oper up notices -- sno_globaloper + * Global nick-change notices -- sno_globalnickchange + * Oper-override (modehacking only) -- override + * Stop services kills -- no_kill_services */ -#loadmodule "extensions/chm_adminonly.so"; -#loadmodule "extensions/chm_operonly.so"; -#loadmodule "extensions/chm_sslonly.so"; -#loadmodule "extensions/chm_operonly_compat.so"; -#loadmodule "extensions/chm_quietunreg_compat.so"; -#loadmodule "extensions/chm_sslonly_compat.so"; -#loadmodule "extensions/createauthonly.so"; -#loadmodule "extensions/extb_account.so"; -#loadmodule "extensions/extb_canjoin.so"; -#loadmodule "extensions/extb_channel.so"; -#loadmodule "extensions/extb_combi.so"; -#loadmodule "extensions/extb_extgecos.so"; -#loadmodule "extensions/extb_hostmask.so"; -#loadmodule "extensions/extb_oper.so"; -#loadmodule "extensions/extb_realname.so"; -#loadmodule "extensions/extb_server.so"; -#loadmodule "extensions/extb_ssl.so"; -#loadmodule "extensions/hurt.so"; -#loadmodule "extensions/ip_cloaking_4.0.so"; -#loadmodule "extensions/ip_cloaking.so"; -#loadmodule "extensions/m_findforwards.so"; -#loadmodule "extensions/m_identify.so"; -#loadmodule "extensions/no_oper_invis.so"; -#loadmodule "extensions/sno_farconnect.so"; -#loadmodule "extensions/sno_globalkline.so"; -#loadmodule "extensions/sno_globaloper.so"; -#loadmodule "extensions/sno_whois.so"; -#loadmodule "extensions/override.so"; -#loadmodule "extensions/no_kill_services.so"; +#loadmodule "extensions/chm_adminonly"; +#loadmodule "extensions/chm_nonotice"; +#loadmodule "extensions/chm_operonly"; +#loadmodule "extensions/chm_sslonly"; +#loadmodule "extensions/chm_operpeace"; +#loadmodule "extensions/createauthonly"; +#loadmodule "extensions/extb_account"; +#loadmodule "extensions/extb_canjoin"; +#loadmodule "extensions/extb_channel"; +#loadmodule "extensions/extb_combi"; +#loadmodule "extensions/extb_extgecos"; +#loadmodule "extensions/extb_hostmask"; +#loadmodule "extensions/extb_oper"; +#loadmodule "extensions/extb_realname"; +#loadmodule "extensions/extb_server"; +#loadmodule "extensions/extb_ssl"; +#loadmodule "extensions/extb_usermode"; +#loadmodule "extensions/helpops"; +#loadmodule "extensions/hurt"; +#loadmodule "extensions/ip_cloaking_4.0"; +#loadmodule "extensions/ip_cloaking"; +#loadmodule "extensions/m_extendchans"; +#loadmodule "extensions/m_findforwards"; +#loadmodule "extensions/m_identify"; +#loadmodule "extensions/m_locops"; +#loadmodule "extensions/no_oper_invis"; +#loadmodule "extensions/sno_farconnect"; +#loadmodule "extensions/sno_globalnickchange"; +#loadmodule "extensions/sno_globaloper"; +#loadmodule "extensions/override"; +#loadmodule "extensions/no_kill_services"; /* serverinfo {}: Contains information about the server. (OLD M:) */ serverinfo { @@ -127,11 +134,6 @@ serverinfo { */ network_name = "MyNet"; - /* hub: allow this server to act as a hub and have multiple servers - * connected to it. - */ - hub = no; - /* vhost: the IP to bind to when we connect outward to ipv4 servers. * This should be an ipv4 IP only. */ @@ -140,17 +142,22 @@ serverinfo { /* vhost6: the IP to bind to when we connect outward to ipv6 servers. * This should be an ipv6 IP only. */ - #vhost6 = "2001:db7:2::6"; - - /* ssl_private_key: our ssl private key */ - ssl_private_key = "etc/ssl.key"; + #vhost6 = "2001:db8:2::6"; - /* ssl_cert: certificate for our ssl server */ + /* ssl_cert: certificate (and optionally key) for our ssl server */ ssl_cert = "etc/ssl.pem"; - /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */ + /* ssl_private_key: our ssl private key (if not contained in ssl_cert file) */ + #ssl_private_key = "etc/ssl.key"; + + /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 2048 */ + /* If you do not provide parameters, some TLS backends will fail on DHE- ciphers, + and some will succeed but use weak, common DH groups! */ ssl_dh_params = "etc/dh.pem"; + /* ssl_cipher_list: A list of ciphers, dependent on your TLS backend */ + #ssl_cipher_list = "TLS_CHACHA20_POLY1305_SHA256:EECDH+HIGH:EDH+HIGH:HIGH:!aNULL"; + /* ssld_count: number of ssld processes you want to start, if you * have a really busy server, using N-1 where N is the number of * cpu/cpu cores you have might be useful. A number greater than one @@ -240,7 +247,7 @@ class "users" { */ cidr_ipv6_bitlen = 64; - /* number_per_cidr: Number of connections to allow from a subnet of the + /* number_per_cidr: Number of connections to allow from a subnet of the * size given in cidr_ipv4_bitlen/cidr_ipv6_bitlen. * 4 seems to be a good default to me. */ @@ -277,17 +284,20 @@ class "server" { */ connectfreq = 5 minutes; - /* max number: the amount of servers to autoconnect to. if the number + /* max_autoconn: the amount of servers to autoconnect to. if the number * of servers in the class is or exceeds this, no more servers in the * class are autoconnected. oper initiated connects are unaffected. * this should usually be set to either 0 or 1. (autoconnecting from * hubs to leaves may cause leaves to function as hubs by having * multiple servers connected to them.) */ - max_number = 1; + max_autoconn = 1; + + /* max_number: the maximum number of servers allowed in this class */ + max_number = 100; /* sendq: servers need a higher sendq as they are sent more data */ - sendq=2 megabytes; + sendq = 2 megabytes; }; /* listen {}: contain information about the ports ircd listens on (OLD P:) */ @@ -302,19 +312,19 @@ listen { /* port: the specific port to listen on. if no host is specified * before, it will listen on all available IPs. * - * sslport: the specific port to listen ssl connections on. if no + * sslport: the specific port to listen ssl connections on. if no * host is specified before, it will listen on all available IPs. * * ports are seperated via a comma, a range may be specified using ".." */ - + /* port: listen on all available IPs, ports 5000 and 6665 to 6669 */ port = 5000, 6665 .. 6669; - - /* sslport: listen for ssl connections on all available IPs, port 9999 */ - sslport = 9999; - /* host: set a specific IP/host the ports after the line will listen + /* sslport: listen for ssl connections on all available IPs, port 6697 */ + sslport = 6697; + + /* host: set a specific IP/host the ports after the line will listen * on. This may be ipv4 or ipv6. */ host = "192.0.2.6"; @@ -324,6 +334,12 @@ listen { host = "2001:db8:2::6"; port = 7002; sslport = 9002; + + /* wsock: listeners defined with this option enabled will be websocket listeners, + * and will not accept normal clients. + */ + wsock = yes; + sslport = 9999; }; /* auth {}: allow users to connect to the ircd (OLD I:) */ @@ -348,7 +364,7 @@ auth { * flags = ...; below if it is. */ password = "letmein"; - + /* spoof: fake the users user@host to be be this. You may either * specify a host or a user@host to spoof to. This is free-form, * just do everyone a favour and dont abuse it. (OLD I: = flag) @@ -356,26 +372,31 @@ auth { spoof = "I.still.hate.packets"; /* Possible flags in auth: - * + * * encrypted | password is encrypted with mkpasswd * spoof_notice | give a notice when spoofing hosts * exceed_limit (old > flag) | allow user to exceed class user limits - * kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls - * dnsbl_exempt | exempt this user from dnsbls - * spambot_exempt | exempt this user from spambot checks - * shide_exempt | exempt this user from serverhiding + * kline_exempt (old ^ flag) | exempt this user from k/g/xlines, + * | dnsbls, and proxies + * dnsbl_exempt | exempt this user from dnsbls + * proxy_exempt | exempt this user from proxies + * spambot_exempt | exempt this user from spambot checks + * shide_exempt | exempt this user from serverhiding * jupe_exempt | exempt this user from generating * warnings joining juped channels - * resv_exempt | exempt this user from resvs + * resv_exempt | exempt this user from resvs * flood_exempt | exempt this user from flood limits * USE WITH CAUTION. * no_tilde (old - flag) | don't prefix ~ to username if no ident * need_ident (old + flag) | require ident for user in this class * need_ssl | require SSL/TLS for user in this class * need_sasl | require SASL id for user in this class + * extend_chans | allow this user to join more channels than normal + * kline_spoof_ip | if this block has a spoof host, klines match only + * | the spoof and not the underlying IP */ flags = kline_exempt, exceed_limit; - + /* class: the class the user is placed in */ class = "opers"; }; @@ -387,7 +408,7 @@ auth { */ redirserv = "irc.example.net"; redirport = 6667; - + user = "*.example.com"; /* class: a class is required even though it is not used */ @@ -406,8 +427,15 @@ privset "local_op" { * * Available options: * - * oper:local_kill: allows local users to be /KILL'd - * oper:global_kill: allows local and remote users to be /KILL'd + * oper:general: enable most general oper privileges that came + * with +o in older releases + * auspex:oper: allows the oper to see through oper hiding + * auspex:umodes: allows viewing other users' modes + * auspex:cmodes: shows privileged cmodes + * auspex:hostname: shows hidden hostnames/ips + * oper:privs: allows /stats o/O and seeing privset in /whois + * oper:testline: allows /testline and /testgecos + * oper:kill: allows local and remote users to be /KILL'd * oper:routing: allows remote SQUIT and CONNECT * oper:kline: allows KLINE and DLINE * oper:unkline: allows UNKLINE and UNDLINE @@ -418,18 +446,32 @@ privset "local_op" { * may (un)load modules and see various * additional information. * oper:hidden_admin: gives admin privileges except - * will not have the admin lines in - * whois. - * oper:xline: allows use of /quote xline/unxline - * oper:resv: allows /quote resv/unresv and cmode +LP + * will not have the admin lines in + * whois. + * oper:xline: allows use of /quote xline/unxline + * oper:resv: allows /quote resv/unresv + * oper:cmodes: allows cmode +LP * oper:operwall: allows the oper to send/receive operwalls - * oper:spy: allows 'operspy' features to see through +s - * channels etc. see /quote help operspy + * oper:spy: allows 'operspy' features to see through +s + * channels etc. see /quote help operspy * oper:hidden: hides the oper from /stats p * oper:remoteban: allows remote kline etc - * oper:mass_notice: allows sending wallops and mass notices - */ - privs = oper:local_kill, oper:operwall; + * oper:mass_notice: allows sending mass notices + * oper:wallops: allows sending wallops messages + * oper:grant: allows using the GRANT command + * usermode:servnotice: allows setting +s + * oper:message: allows opers to bypass CALLERID (usermode +g) + * + * Privileges provided by extensions include: + * + * oper:dehelper: allows the DEHELPER command (from extensions/helpops) + * oper:override: enables oper override via umode +p (from extensions/override) + * oper:receive_immunity: + * confers the benefits of chmode +M (operpeace) (from extensions/chm_operpeace) + * usermode:helpops allows setting +h (from extensions/helpops) + */ + privs = oper:general, oper:privs, oper:testline, oper:kill, oper:operwall, oper:message, + usermode:servnotice, auspex:oper, auspex:hostname, auspex:umodes, auspex:cmodes; }; privset "server_bot" { @@ -440,13 +482,14 @@ privset "server_bot" { privset "global_op" { extends = "local_op"; - privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline, - oper:resv, oper:mass_notice, oper:remoteban; + privs = oper:routing, oper:kline, oper:unkline, oper:xline, + oper:resv, oper:cmodes, oper:mass_notice, oper:wallops, + oper:remoteban; }; privset "admin" { extends = "global_op"; - privs = oper:admin, oper:die, oper:rehash, oper:spy; + privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant; }; /* operator {}: defines ircd operators. (OLD O:) */ @@ -461,13 +504,13 @@ operator "god" { user = "*@127.0.0.1"; /* password: the password required to oper. Unless ~encrypted is - * contained in flags = ...; this will need to be encrypted using + * contained in flags = ...; this will need to be encrypted using * mkpasswd, MD5 is supported */ password = "etcnjl8juSU1E"; /* rsa key: the public key for this oper when using Challenge. - * A password should not be defined when this is used, see + * A password should not be defined when this is used, see * doc/challenge.txt for more information. */ #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub"; @@ -505,12 +548,21 @@ operator "god" { privset = "admin"; }; -/* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */ +/* connect {}: controls servers we connect with (OLD C:, N:, H:, L:). + * + * This configuration is used whether connections are incoming or + * outgoing. + */ connect "irc.uplink.com" { - /* the name must go above */ + /* the name of the other server must go above. It should match the + * other server's name in its serverinfo {} block, and does not + * need to be an actual hostname. + */ - /* host: the host or IP to connect to. If a hostname is used it - * must match the reverse dns of the server. + /* host: the host or IP to connect to. + * + * It is also used to validate incoming connections. If a hostname + * is used, it must match the reverse dns of the server. */ host = "203.0.113.3"; @@ -525,74 +577,52 @@ connect "irc.uplink.com" { send_password = "password"; accept_password = "anotherpassword"; - /* fingerprint: if specified, the server's client certificate - * fingerprint will be checked against the specified fingerprint - * below. + /* fingerprint: if flags = ssl is specified, the server's + * certificate fingerprint will be checked against the fingerprint + * specified below. required if using flags = ssl. */ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b"; /* port: the port to connect to this server on */ port = 6666; - /* hub mask: the mask of servers that this server may hub. Multiple - * entries are permitted - */ - hub_mask = "*"; - - /* leaf mask: the mask of servers this server may not hub. Multiple - * entries are permitted. Useful for forbidding EU -> US -> EU routes. - */ - #leaf_mask = "*.uk"; - /* class: the class this server is in */ class = "server"; /* flags: controls special options for this server - * encrypted - marks the accept_password as being crypt()'d - * autoconn - automatically connect to this server - * compressed - compress traffic via ziplinks - * topicburst - burst topics between servers - * ssl - ssl/tls encrypted server connections + * encrypted - marks the accept_password as being crypt()'d + * autoconn - automatically connect to this server + * topicburst - burst topics between servers + * ssl - ssl/tls encrypted server connections + * no-export - marks the link as a no-export link (not exported to other links) */ - flags = compressed, topicburst; + flags = topicburst; }; -connect "ipv6.some.server" { - /* Hosts that are IPv6 addresses must be in :: shortened form - * if applicable. Addresses starting with a colon get an extra - * zero prepended, for example: 0::1 - */ +connect "ipv6.lame.server" { + host = "192.0.2.1"; host = "2001:db8:3::8"; send_password = "password"; accept_password = "password"; port = 6666; - /* aftype: controls whether the connection uses "ipv4" or "ipv6". - * Default is ipv4. + /* aftype: controls whether the outgoing connection uses "ipv4" or "ipv6". + * Default is to try either at random. */ aftype = ipv6; class = "server"; }; connect "ssl.uplink.com" { - /* Example of ssl server-to-server connection, ssl flag doesn't need - * compressed flag, 'cause it uses own compression - */ host = "203.0.113.129"; send_password = "password"; accept_password = "anotherpassword"; port = 9999; - hub_mask = "*"; class = "server"; flags = ssl, topicburst; }; -/* cluster {}; servers that we propagate things to automatically. - * NOTE: This does NOT grant them privileges to apply anything locally, - * you must add a seperate shared block for that. Clustering will - * only be done for actions by LOCAL opers, that arent directed - * remotely. - */ +/* cluster {}; servers that we propagate things to automatically. */ cluster { /* name: the server to share with, this can be a wildcard and may be * stacked. @@ -625,8 +655,7 @@ cluster { /* service{}: privileged servers (services). These servers have extra * privileges such as setting login names on users and introducing clients - * with umode +S (unkickable, hide channels, etc). This does not allow them - * to set bans, you need a separate shared{} for that. + * with umode +S (unkickable, hide channels, etc). * Do not place normal servers here. * There may be only one service{} block. */ @@ -635,56 +664,6 @@ service { name = "services.int"; }; -/* shared {}: users that are allowed to place remote bans on our server. - * NOTE: These are ordered top down. The first one the user@host and server - * matches will be used. Their access will then be decided on that - * block and will not fall back to another block that matches. - */ -shared { - /* oper: the user@host and server the user must be on to set klines. - * The first field must be a user@host, the second field is an - * optional server. These may be stacked. - */ - /* flags: list of what to allow them to place, all the oper lines - * above this (up until another flags entry) will receive these - * flags. This *must* be present. - * - * kline - allow setting perm/temp klines - * tkline - allow setting temp klines - * unkline - allow removing klines - * xline - allow setting perm/temp xlines - * txline - allow setting temp xlines - * unxline - allow removing xlines - * resv - allow setting perm/temp resvs - * tresv - allow setting temp resvs - * unresv - allow removing xlines - * all - allow oper/server to do all of above. - * locops - allow locops - only used for servers who cluster - * rehash - allow rehashing - * dline - allow setting perm/temp dlines - * tdline - allow setting temp dlines - * undline - allow removing dlines - * none - disallow everything - */ - - /* allow flame@*.leeh.co.uk on server irc.ircd-ratbox.org and - * allow leeh@*.leeh.co.uk on server ircd.ircd-ratbox.org to kline - */ - oper = "flame@*.leeh.co.uk", "irc.ircd-ratbox.org"; - oper = "leeh@*.leeh.co.uk", "ircd.ircd-ratbox.org"; - flags = kline; - - /* you may forbid certain opers/servers from doing anything */ - oper = "irc@vanity.oper", "*"; - oper = "*@*", "irc.vanity.server"; - oper = "irc@another.vanity.oper", "bigger.vanity.server"; - flags = none; - - /* or allow everyone to place temp klines */ - oper = "*@*"; - flags = tkline; -}; - /* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */ exempt { ip = "192.0.2.0/24"; @@ -693,6 +672,12 @@ exempt { ip = "127.0.0.1"; }; +/* secure {}: IPs that are considered to be secure networks, and get + * +Z without using TLS */ +secure { + ip = "127.0.0.1"; +}; + /* The channel block contains options pertaining to channels */ channel { /* invex: Enable/disable channel mode +I, a n!u@h list of masks @@ -730,6 +715,9 @@ channel { /* max chans: The maximum number of channels a user can join/be on. */ max_chans_per_user = 15; + /* max chans (large): The extended maximum number of channels a user can join. */ + max_chans_per_user_large = 60; + /* max bans: maximum number of +b/e/I/q modes in a channel */ max_bans = 100; @@ -750,7 +738,7 @@ channel { default_split_user_count = 0; /* split servers: when the amount of servers that have acknowledged - * theyve finished bursting is lower than this, consider ourselves + * theyve finished bursting is lower than this, consider ourselves * split. this must be set for automatic splitmode */ default_split_server_count = 0; @@ -794,6 +782,28 @@ channel { * supported. */ disable_local_channels = no; + + /* autochanmodes: the channel modes that should be automatically set + * when a channel is created. + */ + autochanmodes = "+nt"; + + /* displayed_usercount: the minimum amount of users on a channel before it + * is displayed in LIST. this parameter can be overridden using ELIST parameters, + * such as LIST >0. + */ + displayed_usercount = 3; + + /* strip_topic_colors: whether or not color codes in TOPIC should be stripped. */ + strip_topic_colors = no; + + /* opmod_send_statusmsg: format messages sent to ops due to +z + * as PRIVMSG @#channel when sent to clients. + */ + opmod_send_statusmsg = no; + + /* ip_bans_through_vhost: should channel IP bans see through dynamic spoofed hosts? */ + ip_bans_through_vhost = yes; }; @@ -825,8 +835,7 @@ serverhide { * You can have multiple combinations of host and rejection reasons. * They are used in pairs of one host/rejection reason. * - * These settings should be adequate for most networks, and are (presently) - * required for use on StaticBox. + * These settings should be adequate for most networks. * * Word to the wise: Do not use blacklists like SPEWS for blocking IRC * connections. @@ -851,7 +860,7 @@ serverhide { * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match * an A record. The blacklist is only applied if it matches anything in the * list. You may freely mix full IP's and final octets. - * + * * Consult your blacklist provider for the meaning of these parameters; they * are usually used to denote different ban types. */ @@ -867,6 +876,78 @@ blacklist { # reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect"; }; +/* These are the OPM settings. + * This is similar to the functionality provided by BOPM. It will scan incoming + * connections for open proxies by connecting to clients and attempting several + * different open proxy handshakes. If they connect back to us (via a dedicated + * listening port), and send back the data we send them, they are considered + * an open proxy. For politeness reasons (users may be confused by the incoming + * connection attempts if they are logging incoming connections), the user is + * notified upon connect if they are being scanned. + * + * WARNING: + * These settings are considered experimental. Only the most common proxy types + * are checked for (Charybdis is immune from POST and GET proxies). If you are + * not comfortable with experimental code, do not use this feature. + */ +#opm { + /* IPv4 address to listen on. This must be a publicly facing IP address + * to be effective. + * If omitted, it defaults to serverinfo::vhost. + */ + #listen_ipv4 = "127.0.0.1"; + + /* IPv4 port to listen on. + * This should not be the same as any existing listeners. + */ + #port_v4 = 32000; + + /* IPv6 address to listen on. This must be a publicly facing IP address + * to be effective. + * If omitted, it defaults to serverinfo::vhost6. + */ + #listen_ipv6 = "::1"; + + /* IPv6 port to listen on. + * This should not be the same as any existing listeners. + */ + #port_v6 = 32000; + + /* You can also set the listen_port directive which will set both the + * IPv4 and IPv6 ports at once. + */ + #listen_port = 32000; + + /* This sets the timeout in seconds before ending open proxy scans. + * Values less than 1 or greater than 60 are ignored. + * It is advisable to keep it as short as feasible, so clients do not + * get held up by excessively long scan times. + */ + #timeout = 5; + + /* These are the ports to scan for SOCKS4 proxies on. They may overlap + * with other scan types. Sensible defaults are given below. + */ + #socks4_ports = 80, 443, 1080, 8000, 8080, 10800; + + /* These are the ports to scan for SOCKS5 proxies on. They may overlap + * with other scan types. Sensible defaults are given below. + */ + #socks5_ports = 80, 443, 1080, 8000, 8080, 10800; + + /* These are the ports to scan for HTTP CONNECT proxies on (plaintext). + * They may overlap with other scan types. Sensible defaults are given + * below. + */ + #httpconnect_ports = 80, 8080, 8000; + + /* These are the ports to scan for HTTPS CONNECT proxies on (SSL). + * They may overlap with other scan types. Sensible defaults are given + * below. + */ + #httpsconnect_ports = 443, 4443; +#}; + /* * Alias blocks allow you to define custom commands. (Old m_sshortcut.c) * They send PRIVMSG to the given target. A real command takes @@ -983,7 +1064,7 @@ general { */ default_floodcount = 10; - /* failed oper notice: send a notice to all opers on the server when + /* failed oper notice: send a notice to all opers on the server when * someone tries to OPER and uses the wrong password, host or ident. */ failed_oper_notice = yes; @@ -991,7 +1072,7 @@ general { /* dots in ident: the amount of '.' characters permitted in an ident * reply before the user is rejected. */ - dots_in_ident=2; + dots_in_ident = 2; /* min nonwildcard: the minimum non wildcard characters in k/d/g lines * placed via the server. klines hand placed are exempt from limits. @@ -1055,28 +1136,73 @@ general { * displayed unconditionally. */ global_snotices = yes; - - /* dline reason: show the user the dline reason when they connect + + /* dline reason: show the user the dline reason when they connect * and are dlined. */ dline_with_reason = yes; - - /* kline delay: delay the checking of klines until a specified time. - * Useful if large kline lists are applied often to prevent the - * server eating CPU. - */ - kline_delay = 0 seconds; - /* kline reason: show the user the reason why they are k/dlined + /* kline reason: show the user the reason why they are k/dlined * on exit. may give away who set k/dline when set via tcm. */ kline_with_reason = yes; + /* tkline duration: when showing users their k/dline reason (see + * kline_with_reason), don't add "Temporary K-line 123 min." + */ + hide_tkdline_duration = no; + /* kline reason: make the users quit message on channels this * reason instead of the oper's reason. */ kline_reason = "Connection closed"; + /* SASL access only client message: give users a message that + * informs them + */ + sasl_only_client_message = "You need to identify via SASL to use this server."; + + /* Identd access only client message: give users a message that + * informs them + */ + identd_only_client_message = "You need to install identd to use this server."; + + /* SCTP forbidden client message: give users a message that + * informs them + */ + sctp_forbidden_client_message = "You are not allowed to use SCTP on this server."; + + /* SSL/TLS access only client message: give users a message that + * informs them + */ + ssltls_only_client_message = "You need to use SSL/TLS to use this server."; + + /* Not authorised client message: tell users that they are not + * authorised + */ + not_authorised_client_message = "You are not authorised to access this server."; + + /* Illegal hostname client message: tell users that they have illegal + * chars in their hostname + */ + illegal_hostname_client_message = "You have an illegal character in your hostname."; + + /* Server full client message: tell users that the server they're connecting + * to is full + */ + server_full_client_message = "Sorry, server is full - try later"; + + /* illegal name long client message: long-form explanation that their username + * contains illegal characters + */ + illegal_name_long_client_message = "Your username is invalid. Please make sure that your username contains " + "only alphanumeric characters."; + + /* illegal name short client message: short-form notification that their username + * contains illegal characters; will be followed by ": their_username" + */ + illegal_name_short_client_message = "Invalid username"; + /* identify to services via server password * if auth{} block had no password but the user specified a * server password anyway, send a PRIVMSG to @@ -1089,7 +1215,7 @@ general { non_redundant_klines = yes; /* warn no nline: warn opers about servers that try to connect but - * we dont have a connect {} block for. Twits with misconfigured + * we dont have a connect {} block for. Twits with misconfigured * servers can get really annoying with this enabled. */ warn_no_nline = yes; @@ -1107,36 +1233,40 @@ general { stats_e_disabled = no; /* stats c oper only: make stats c (connect {}) oper only */ - stats_c_oper_only=no; - - /* stats h oper only: make stats h (hub_mask/leaf_mask) oper only */ - stats_h_oper_only=no; + stats_c_oper_only = no; /* stats y oper only: make stats y (class {}) oper only */ - stats_y_oper_only=no; + stats_y_oper_only = no; /* stats o oper only: make stats o (opers) oper only */ - stats_o_oper_only=yes; + stats_o_oper_only = yes; /* stats P oper only: make stats P (ports) oper only - * NOTE: users doing stats P will never be given the ips that the + * NOTE: users doing stats P will never be given the ips that the * server listens on, simply the ports. */ - stats_P_oper_only=no; + stats_P_oper_only = no; /* stats i oper only: make stats i (auth {}) oper only. set to: * yes: show users no auth blocks, made oper only. * masked: show users first matching auth block * no: show users all auth blocks. */ - stats_i_oper_only=masked; + stats_i_oper_only = masked; /* stats k/K oper only: make stats k/K (klines) oper only. set to: * yes: show users no auth blocks, made oper only * masked: show users first matching auth block * no: show users all auth blocks. */ - stats_k_oper_only=masked; + stats_k_oper_only = masked; + + /* stats l/L oper only: + * yes: non-opers can't use this at all + * self: non-opers see only themselves + * no: show targeted users or non-hidden opers to everyone + */ + stats_l_oper_only = self; /* map oper only: make /map oper only */ map_oper_only = no; @@ -1193,12 +1323,18 @@ general { /* REMOVE ME. The following line checks you've been reading. */ havent_read_conf = yes; - - /* max targets: the maximum amount of targets in a single + + /* max targets: the maximum amount of targets in a single * PRIVMSG/NOTICE. set to 999 NOT 0 for unlimited. */ max_targets = 4; + /* post-registration delay: wait this long before processing commands from a newly + * registered user. Used to allow network utility bots to perform any actions + * (such as host changes or proxy scanning) before the user can join channels. + */ + post_registration_delay = 2 seconds; + /* use_whois_actually: send clients requesting a whois a numeric * giving the real IP of non-spoofed clients to prevent DNS abuse. */ @@ -1206,9 +1342,9 @@ general { /* usermodes configurable: a list of usermodes for the options below * - * +g - callerid - Server Side Ignore + * +g - callerid - Server-side private message allow list * +D - deaf - Don't see channel messages - * +i - invisible - Not shown in NAMES or WHO unless you share a + * +i - invisible - Not shown in NAMES or WHO unless you share a * a channel * +l - locops - See LOCOPS messages * +Q - noforward - Unaffected by channel forwarding @@ -1217,7 +1353,7 @@ general { * +w - wallop - See oper and server generated WALLOPS * +z - operwall - See operwalls */ - + /* oper only umodes: usermodes only opers may set */ oper_only_umodes = operwall, locops, servnotice; @@ -1228,14 +1364,6 @@ general { * provided they have umode +s set */ oper_snomask = "+s"; - /* compression level: level of compression for compressed links between - * servers. - * - * values are between: 1 (least compression, fastest) - * and: 9 (most compression, slowest). - */ - #compression_level = 6; - /* burst_away: This enables bursting away messages to servers. * With this disabled, we will only propogate AWAY messages * as users send them, but never burst them. Be warned though @@ -1300,19 +1428,46 @@ general { away_interval = 30; /* certfp_method: the method that should be used for computing certificate fingerprints. - * Acceptable options are sha1, sha256 and sha512. Networks running versions of charybdis - * prior to charybdis 3.5 MUST use sha1 for certfp_method. + * Acceptable options are sha1, sha256, spki_sha256, sha512 and spki_sha512. Networks + * running versions of charybdis prior to charybdis 3.5 MUST use sha1 for certfp_method. + * + * The spki_* variants operate on the SubjectPublicKeyInfo of the certificate, which does + * not change unless the private key is changed. This allows the fingerprint to stay + * constant even if the certificate is reissued. These fingerprints will be prefixed with + * "SPKI:SHA2-256:" or "SPKI:SHA2-512:" depending on the hash type. These fingerprints + * are not supported on servers running charybdis 3.5.3 or earlier. + * + * To generate a fingerprint from a certificate file, please use the mkfingerprint utility + * program located in the bin/ subdirectory of your IRCd installation. Running it with no + * arguments will give you a brief usage message; it takes method and filename arguments. + */ + certfp_method = spki_sha256; + + /* hide_opers_in_whois: if set to YES, then oper status will be hidden in /WHOIS output. */ + hide_opers_in_whois = no; + + /* tls_ciphers_oper_only: show the TLS cipher string in /WHOIS only to opers and self */ + tls_ciphers_oper_only = no; + + /* hidden_caps: client capabilities we'll pretend we don't support until they're requested */ + #hidden_caps = "userhost-in-names"; + + /* oper_secure_only: require TLS on any connection trying to oper up */ + oper_secure_only = no; + + /* drain_reason: Message shown to users when they are rejected from a draining server. + * requires extensions/drain to be loaded. */ - certfp_method = sha1; + drain_reason = "This server is not accepting connections."; }; modules { - /* module path: paths to search for modules specified below and + /* module path: paths to search for modules specified below and * in /modload. */ path = "/usr/local/ircd/modules"; path = "/usr/local/ircd/modules/autoload"; /* module: the name of a module to load on startup/rehash */ - #module = "some_module.so"; + #module = "some_module"; };