X-Git-Url: https://jfr.im/git/solanum.git/blobdiff_plain/1c99c4a4b832beeee89aeda5860d53dd3c2099a8..4a8bd0b2fb32e1b0672c765615867f94cf328761:/doc/reference.conf diff --git a/doc/reference.conf b/doc/reference.conf index 98f20931..22ba0160 100644 --- a/doc/reference.conf +++ b/doc/reference.conf @@ -1,4 +1,4 @@ -/* doc/reference.conf - charybdis Example configuration file +/* doc/reference.conf - solanum example configuration file * * Copyright (C) 2000-2002 Hybrid Development Team * Copyright (C) 2002-2005 ircd-ratbox development team @@ -63,7 +63,7 @@ * Server bans (+b $s:mask) -- extb_server * SSL bans (+b $z) -- extb_ssl * User mode bans (+b $u:modes) -- extb_usermode - * Helpops system (umode +H) -- helpops + * Helpops system (umode +h) -- helpops * HURT system -- hurt * New host mangling (umode +x) -- ip_cloaking_4.0 * Old host mangling (umode +h) -- ip_cloaking @@ -290,14 +290,17 @@ class "server" { */ connectfreq = 5 minutes; - /* max number: the amount of servers to autoconnect to. if the number + /* max_autoconn: the amount of servers to autoconnect to. if the number * of servers in the class is or exceeds this, no more servers in the * class are autoconnected. oper initiated connects are unaffected. * this should usually be set to either 0 or 1. (autoconnecting from * hubs to leaves may cause leaves to function as hubs by having * multiple servers connected to them.) */ - max_number = 1; + max_autoconn = 1; + + /* max_number: the maximum number of servers allowed in this class */ + max_number = 100; /* sendq: servers need a higher sendq as they are sent more data */ sendq = 2 megabytes; @@ -430,8 +433,15 @@ privset "local_op" { * * Available options: * - * oper:local_kill: allows local users to be /KILL'd - * oper:global_kill: allows local and remote users to be /KILL'd + * oper:general: enable most general oper privileges that came + * with +o in older releases + * auspex:oper: allows the oper to see through oper hiding + * auspex:umodes: allows viewing other users' modes + * auspex:cmodes: shows privileged cmodes + * auspex:hostname: shows hidden hostnames/ips + * oper:privs: allows /stats o/O and seeing privset in /whois + * oper:testline: allows /testline and /testgecos + * oper:kill: allows local and remote users to be /KILL'd * oper:routing: allows remote SQUIT and CONNECT * oper:kline: allows KLINE and DLINE * oper:unkline: allows UNKLINE and UNDLINE @@ -442,19 +452,30 @@ privset "local_op" { * may (un)load modules and see various * additional information. * oper:hidden_admin: gives admin privileges except - * will not have the admin lines in - * whois. - * oper:xline: allows use of /quote xline/unxline - * oper:resv: allows /quote resv/unresv and cmode +LP + * will not have the admin lines in + * whois. + * oper:xline: allows use of /quote xline/unxline + * oper:resv: allows /quote resv/unresv + * oper:cmodes: allows cmode +LP * oper:operwall: allows the oper to send/receive operwalls - * oper:spy: allows 'operspy' features to see through +s - * channels etc. see /quote help operspy + * oper:spy: allows 'operspy' features to see through +s + * channels etc. see /quote help operspy * oper:hidden: hides the oper from /stats p * oper:remoteban: allows remote kline etc * oper:mass_notice: allows sending wallops and mass notices - * oper:grant: allows using the GRANT command - */ - privs = oper:local_kill, oper:operwall; + * oper:grant: allows using the GRANT command + * usermode:servnotice: allows setting +s + * + * Privileges provided by extensions include: + * + * oper:dehelper: allows the DEHELPER command (from extensions/helpops) + * oper:override: enables oper override via umode +p (from extensions/override) + * oper:receive_immunity: + * confers the benefits of chmode +M (operpeace) (from extensions/chm_operpeace) + * usermode:helpops allows setting +h (from extensions/helpops) + */ + privs = oper:general, oper:privs, oper:testline, oper:kill, oper:operwall, usermode:servnotice, + auspex:oper, auspex:hostname, auspex:umodes, auspex:cmodes; }; privset "server_bot" { @@ -465,8 +486,8 @@ privset "server_bot" { privset "global_op" { extends = "local_op"; - privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline, - oper:resv, oper:mass_notice, oper:remoteban; + privs = oper:routing, oper:kline, oper:unkline, oper:xline, + oper:resv, oper:cmodes, oper:mass_notice, oper:remoteban; }; privset "admin" { @@ -610,12 +631,7 @@ connect "ssl.uplink.com" { flags = ssl, topicburst; }; -/* cluster {}; servers that we propagate things to automatically. - * NOTE: This does NOT grant them privileges to apply anything locally, - * you must add a seperate shared block for that. Clustering will - * only be done for actions by LOCAL opers, that arent directed - * remotely. - */ +/* cluster {}; servers that we propagate things to automatically. */ cluster { /* name: the server to share with, this can be a wildcard and may be * stacked. @@ -648,8 +664,7 @@ cluster { /* service{}: privileged servers (services). These servers have extra * privileges such as setting login names on users and introducing clients - * with umode +S (unkickable, hide channels, etc). This does not allow them - * to set bans, you need a separate shared{} for that. + * with umode +S (unkickable, hide channels, etc). * Do not place normal servers here. * There may be only one service{} block. */ @@ -658,59 +673,6 @@ service { name = "services.int"; }; -/* shared {}: users that are allowed to place remote bans on our server. - * NOTE: These are ordered top down. The first one the user@host and server - * matches will be used. Their access will then be decided on that - * block and will not fall back to another block that matches. - */ -shared { - /* oper: the user@host and server the user must be on to set klines. - * The first field must be a user@host, the second field is an - * optional server. These may be stacked. - */ - /* flags: list of what to allow them to place, all the oper lines - * above this (up until another flags entry) will receive these - * flags. This *must* be present. - * - * kline - allow setting perm/temp klines - * tkline - allow setting temp klines - * unkline - allow removing klines - * xline - allow setting perm/temp xlines - * txline - allow setting temp xlines - * unxline - allow removing xlines - * resv - allow setting perm/temp resvs - * tresv - allow setting temp resvs - * unresv - allow removing xlines - * all - allow oper/server to do all of above. - * locops - allow locops - only used for servers who cluster - * rehash - allow rehashing - * dline - allow setting perm/temp dlines - * tdline - allow setting temp dlines - * undline - allow removing dlines - * grant - allow granting operator status - * die - allow remote DIE/RESTART - * module - allow remote module commands - * none - disallow everything - */ - - /* allow flame@*.leeh.co.uk on server irc.ircd-ratbox.org and - * allow leeh@*.leeh.co.uk on server ircd.ircd-ratbox.org to kline - */ - oper = "flame@*.leeh.co.uk", "irc.ircd-ratbox.org"; - oper = "leeh@*.leeh.co.uk", "ircd.ircd-ratbox.org"; - flags = kline; - - /* you may forbid certain opers/servers from doing anything */ - oper = "irc@vanity.oper", "*"; - oper = "*@*", "irc.vanity.server"; - oper = "irc@another.vanity.oper", "bigger.vanity.server"; - flags = none; - - /* or allow everyone to place temp klines */ - oper = "*@*"; - flags = tkline; -}; - /* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */ exempt { ip = "192.0.2.0/24"; @@ -719,6 +681,12 @@ exempt { ip = "127.0.0.1"; }; +/* secure {}: IPs that are considered to be secure networks, and get + * +Z without using TLS */ +secure { + ip = "127.0.0.1"; +}; + /* The channel block contains options pertaining to channels */ channel { /* invex: Enable/disable channel mode +I, a n!u@h list of masks @@ -837,6 +805,11 @@ channel { /* strip_topic_colors: whether or not color codes in TOPIC should be stripped. */ strip_topic_colors = no; + + /* opmod_send_statusmsg: format messages sent to ops due to +z + * as PRIVMSG @#channel when sent to clients. + */ + opmod_send_statusmsg = no; }; @@ -1312,6 +1285,12 @@ general { */ max_targets = 4; + /* post-registration delay: wait this long before processing commands from a newly + * registered user. Used to allow network utility bots to perform any actions + * (such as host changes or proxy scanning) before the user can join channels. + */ + post_registration_delay = 2 seconds; + /* use_whois_actually: send clients requesting a whois a numeric * giving the real IP of non-spoofed clients to prevent DNS abuse. */ @@ -1319,7 +1298,7 @@ general { /* usermodes configurable: a list of usermodes for the options below * - * +g - callerid - Server Side Ignore + * +g - callerid - Server-side private message allow list * +D - deaf - Don't see channel messages * +i - invisible - Not shown in NAMES or WHO unless you share a * a channel @@ -1430,6 +1409,12 @@ general { /* hide_opers_in_whois: if set to YES, then oper status will be hidden in /WHOIS output. */ hide_opers_in_whois = no; + + /* tls_ciphers_oper_only: show the TLS cipher string in /WHOIS only to opers and self */ + tls_ciphers_oper_only = no; + + /* hidden_caps: client capabilities we'll pretend we don't support until they're requested */ + #hidden_caps = "userhost-in-names"; }; modules {