*/
/* Extensions */
-#loadmodule "extensions/chm_operonly_compat.la";
-#loadmodule "extensions/chm_quietunreg_compat.la";
-#loadmodule "extensions/chm_sslonly_compat.la";
-#loadmodule "extensions/chm_operpeace.la";
-#loadmodule "extensions/createauthonly.la";
-#loadmodule "extensions/extb_account.la";
-#loadmodule "extensions/extb_canjoin.la";
-#loadmodule "extensions/extb_channel.la";
-#loadmodule "extensions/extb_combi.la";
-#loadmodule "extensions/extb_extgecos.la";
-#loadmodule "extensions/extb_hostmask.la";
-#loadmodule "extensions/extb_oper.la";
-#loadmodule "extensions/extb_realname.la";
-#loadmodule "extensions/extb_server.la";
-#loadmodule "extensions/extb_ssl.la";
-#loadmodule "extensions/hurt.la";
-#loadmodule "extensions/m_extendchans.la";
-#loadmodule "extensions/m_findforwards.la";
-#loadmodule "extensions/m_identify.la";
-#loadmodule "extensions/no_oper_invis.la";
-#loadmodule "extensions/sno_farconnect.la";
-#loadmodule "extensions/sno_globalkline.la";
-#loadmodule "extensions/sno_globalnickchange.la";
-#loadmodule "extensions/sno_globaloper.la";
-#loadmodule "extensions/sno_whois.la";
-#loadmodule "extensions/override.la";
-#loadmodule "extensions/no_kill_services.la";
+#loadmodule "extensions/chm_operonly_compat";
+#loadmodule "extensions/chm_quietunreg_compat";
+#loadmodule "extensions/chm_sslonly_compat";
+#loadmodule "extensions/chm_operpeace";
+#loadmodule "extensions/createauthonly";
+#loadmodule "extensions/extb_account";
+#loadmodule "extensions/extb_canjoin";
+#loadmodule "extensions/extb_channel";
+#loadmodule "extensions/extb_combi";
+#loadmodule "extensions/extb_extgecos";
+#loadmodule "extensions/extb_hostmask";
+#loadmodule "extensions/extb_oper";
+#loadmodule "extensions/extb_realname";
+#loadmodule "extensions/extb_server";
+#loadmodule "extensions/extb_ssl";
+#loadmodule "extensions/extb_usermode";
+#loadmodule "extensions/hurt";
+#loadmodule "extensions/m_extendchans";
+#loadmodule "extensions/m_findforwards";
+#loadmodule "extensions/m_identify";
+#loadmodule "extensions/m_locops";
+#loadmodule "extensions/no_oper_invis";
+#loadmodule "extensions/sno_farconnect";
+#loadmodule "extensions/sno_globalkline";
+#loadmodule "extensions/sno_globalnickchange";
+#loadmodule "extensions/sno_globaloper";
+#loadmodule "extensions/sno_whois";
+#loadmodule "extensions/override";
+#loadmodule "extensions/no_kill_services";
/*
* IP cloaking extensions: use ip_cloaking_4.0
* releases.
*/
-#loadmodule "extensions/ip_cloaking_4.0.la";
-#loadmodule "extensions/ip_cloaking.la";
+#loadmodule "extensions/ip_cloaking_4.0";
+#loadmodule "extensions/ip_cloaking";
serverinfo {
name = "hades.arpa";
sid = "42X";
description = "charybdis test server";
network_name = "StaticBox";
- hub = yes;
/* On multi-homed hosts you may need the following. These define
* the addresses we connect from to other servers. */
#vhost = "192.0.2.6";
/* for IPv6 */
#vhost6 = "2001:db8:2::6";
-
+
/* ssl_private_key: our ssl private key */
ssl_private_key = "etc/ssl.key";
* flags = ...; below if it is.
*/
password = "letmein";
-
+
/* spoof: fake the users user@host to be be this. You may either
* specify a host or a user@host to spoof to. This is free-form,
* just do everyone a favour and dont abuse it. (OLD I: = flag)
spoof = "I.still.hate.packets";
/* Possible flags in auth:
- *
+ *
* encrypted | password is encrypted with mkpasswd
* spoof_notice | give a notice when spoofing hosts
* exceed_limit (old > flag) | allow user to exceed class user limits
- * kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
- * dnsbl_exempt | exempt this user from dnsbls
- * spambot_exempt | exempt this user from spambot checks
- * shide_exempt | exempt this user from serverhiding
+ * kline_exempt (old ^ flag) | exempt this user from k/g/xlines,
+ * | dnsbls, and proxies
+ * proxy_exempt | exempt this user from proxies
+ * dnsbl_exempt | exempt this user from dnsbls
+ * spambot_exempt | exempt this user from spambot checks
+ * shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* warnings joining juped channels
- * resv_exempt | exempt this user from resvs
+ * resv_exempt | exempt this user from resvs
* flood_exempt | exempt this user from flood limits
- * USE WITH CAUTION.
+ * USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
* need_ssl | require SSL/TLS for user in this class
* need_sasl | require SASL id for user in this class
*/
flags = kline_exempt, exceed_limit;
-
+
/* class: the class the user is placed in */
class = "opers";
};
user = "*god@127.0.0.1";
/* password: the password required to oper. Unless ~encrypted is
- * contained in flags = ...; this will need to be encrypted using
+ * contained in flags = ...; this will need to be encrypted using
* mkpasswd, MD5 is supported
*/
password = "etcnjl8juSU1E";
/* rsa key: the public key for this oper when using Challenge.
- * A password should not be defined when this is used, see
+ * A password should not be defined when this is used, see
* doc/challenge.txt for more information.
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
* You can have multiple combinations of host and rejection reasons.
* They are used in pairs of one host/rejection reason.
*
- * These settings should be adequate for most networks, and are (presently)
- * required for use on StaticBox.
+ * These settings should be adequate for most networks.
*
* Word to the wise: Do not use blacklists like SPEWS for blocking IRC
* connections.
* as of this writing.
*
* As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
- * is considered a match. If included, a comma-separated list of *quoted*
+ * is considered a match. If included, a comma-separated list of *quoted*
* strings is allowed to match queries. They may be of the format "0" to "255"
* to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
- * an A record. The blacklist is only applied if it matches anything in the
+ * an A record. The blacklist is only applied if it matches anything in the
* list. You may freely mix full IP's and final octets.
*
* Consult your blacklist provider for the meaning of these parameters; they
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
};
+/* These are the OPM settings.
+ * This is similar to the functionality provided by BOPM. It will scan incoming
+ * connections for open proxies by connecting to clients and attempting several
+ * different open proxy handshakes. If they connect back to us (via a dedicated
+ * listening port), and send back the data we send them, they are considered
+ * an open proxy. For politeness reasons (users may be confused by the incoming
+ * connection attempts if they are logging incoming connections), the user is
+ * notified upon connect if they are being scanned.
+ *
+ * WARNING:
+ * These settings are considered experimental, and as of this writing, the
+ * Charybdis scanner is not as comprehensive as the one available in HOPM. Only
+ * basic SOCKS4 and SOCKS5 scanning is performed on a few well-known ports. You
+ * may disable the open proxy scanning feature by deleting this block if you are
+ * uncomfortable with this.
+ */
+opm {
+ /* IPv4 address to listen on. This must be a publicly facing IP address
+ * to be effective.
+ * If omitted, it defaults to serverinfo::vhost.
+ */
+ #listen_ipv4 = "127.0.0.1";
+
+ /* IPv4 port to listen on.
+ * This should not be the same as any existing listeners.
+ */
+ #port_ipv4 = 32000;
+
+ /* IPv6 address to listen on. This must be a publicly facing IP address
+ * to be effective.
+ * If omitted, it defaults to serverinfo::vhost6.
+ */
+ #listen_ipv6 = "0::1";
+
+ /* IPv6 port to listen on.
+ * This should not be the same as any existing listeners.
+ */
+ #port_ipv6 = 32000;
+
+ /* You can also set a port directive which will set both the IPv4 and
+ * IPv6 ports at once.
+ */
+ port = 32000;
+
+ /* This sets the timeout in seconds before ending open proxy scans.
+ * Values less than 1 or greater than 60 are ignored.
+ * It is advisable to keep it as short as feasible, so clients do not
+ * get held up by excessively long scan times.
+ */
+ timeout = 5;
+
+ /* These are the ports to scan for SOCKS4 proxies on. They may overlap
+ * with other scan types. Sensible defaults are given below.
+ */
+ socks4_ports = 1080, 10800, 443, 80, 8080, 8000;
+
+ /* These are the ports to scan for SOCKS5 proxies on. They may overlap
+ * with other scan types. Sensible defaults are given below.
+ */
+ socks5_ports = 1080, 10800, 443, 80, 8080, 8000;
+
+ /* These are the ports to scan for HTTP connect proxies on (plaintext).
+ * They may overlap with other scan types. Sensible defaults are given
+ * below.
+ */
+ httpconnect_ports = 80, 8080, 8000;
+
+ /* These are the ports to scan for HTTPS CONNECT proxies on (SSL).
+ * They may overlap with other scan types. Sensible defaults are given
+ * below.
+ */
+ httpsconnect_ports = 443, 4443;
+};
+
alias "NickServ" {
target = "NickServ";
};
projects / solanum.git / blobdiff