*
* Written by ejb, wcampbel, db, leeh and others
*
- * $Id: reference.conf 3478 2007-05-24 15:10:06Z jilles $
+ * $Id: reference.conf 3582 2007-11-17 21:55:48Z jilles $
*/
/* IMPORTANT NOTES:
* that matches a user will be used. So place spoofs first, then specials,
* then general access, then restricted.
*
+ * privset {} blocks MUST be specified before anything that uses them. That
+ * means they must be defined before operator {}.
+ *
* Both shell style (#) and C style comments are supported.
*
* Files may be included by either:
* Charybdis contains several extensions that are not enabled by default.
* To use them, uncomment the lines below.
*
- * Restrict channel creation to logged in users -- createauthonly.so
- * Account bans (+b $a[:mask]) -- extb_account.so
- * Banned from another channel (+b $j:mask) -- extb_canjoin.so
- * Other-channel bans (+b $c:mask) -- extb_channel.so
- * Extended ban (+b $x:mask) -- extb_extgecos.so
- * Oper bans (+b $o) -- extb_oper.so
- * Realname (gecos) bans (+b $r:mask) -- extb_realname.so
- * Server bans (+b $s:mask) -- extb_server.so
- * HURT system -- hurt.so
- * Host mangling (umode +h) -- ip_cloaking.so
- * Find channel forwards -- m_findforwards.so
- * /identify support -- m_identify.so
- * Opers cannot be invisible (umode +i) -- no_oper_invis.so
- * Far connection notices (snomask +F) -- sno_farconnect.so
- * Remote k/d/g/x line active notices -- sno_globalkline.so
- * Remote oper up notices -- sno_globaloper.so
- * /whois notifications (snomask +W) -- sno_whois.so
+ * Channel mode +-A (admin only) -- chm_adminonly.so
+ * Channel mode +-O (oper only) -- chm_operonly.so
+ * Channel mode +-S (ssl only) -- chm_sslonly.so
+ * Emulates channel mode +-O (oper only) (+-iI $o) -- chm_operonly_compat.so
+ * Emulates channel mode +-R (quiet unreg) (+-q $~a) -- chm_quietunreg_compat.so
+ * Emulates channel mode +-S (ssl only) (+-b $~z) -- chm_sslonly_compat.so
+ * Restrict channel creation to logged in users -- createauthonly.so
+ * Account bans (+b $a[:mask]) -- extb_account.so
+ * Banned from another channel (+b $j:mask) -- extb_canjoin.so
+ * Other-channel bans (+b $c:mask) -- extb_channel.so
+ * Extended ban (+b $x:mask) -- extb_extgecos.so
+ * Oper bans (+b $o) -- extb_oper.so
+ * Realname (gecos) bans (+b $r:mask) -- extb_realname.so
+ * Server bans (+b $s:mask) -- extb_server.so
+ * SSL bans (+b $z) -- extb_ssl.so
+ * HURT system -- hurt.so
+ * Host mangling (umode +h) -- ip_cloaking.so
+ * Find channel forwards -- m_findforwards.so
+ * /identify support -- m_identify.so
+ * Opers cannot be invisible (umode +i) -- no_oper_invis.so
+ * Far connection notices (snomask +F) -- sno_farconnect.so
+ * Remote k/d/x line active notices -- sno_globalkline.so
+ * Remote oper up notices -- sno_globaloper.so
+ * /whois notifications (snomask +W) -- sno_whois.so
*/
+#loadmodule "extensions/chm_adminonly.so";
+#loadmodule "extensions/chm_operonly.so";
+#loadmodule "extensions/chm_sslonly.so";
+#loadmodule "extensions/chm_operonly_compat.so";
+#loadmodule "extensions/chm_quietunreg_compat.so";
+#loadmodule "extensions/chm_sslonly_compat.so";
#loadmodule "extensions/createauthonly.so";
#loadmodule "extensions/extb_account.so";
#loadmodule "extensions/extb_canjoin.so";
#loadmodule "extensions/extb_oper.so";
#loadmodule "extensions/extb_realname.so";
#loadmodule "extensions/extb_server.so";
+#loadmodule "extensions/extb_ssl.so";
#loadmodule "extensions/hurt.so";
#loadmodule "extensions/ip_cloaking.so";
#loadmodule "extensions/m_findforwards.so";
/* name: the name of our server */
name = "hades.arpa";
- /* use ts6: whether we want to use the TS6 protocol to other servers
- * or not.
- */
- use_ts6 = yes;
-
/* sid: the unique server id of our server. This must be three
* characters long. The first character must be a digit [0-9], the
* remaining two chars may be letters [A-Z] or digits [0-9].
*
- * This must be specified even if use_ts6 is set to no.
+ * This parameter must be specified for the server to start.
*/
sid = "42X";
* This should be an ipv6 IP only.
*/
#vhost6 = "3ffe:80e8:546::2";
+
+ /* ssl_private_key: our ssl private key */
+ ssl_private_key = "etc/test.key";
+
+ /* ssl_cert: certificate for our ssl server */
+ ssl_cert = "etc/test.cert";
+
+ /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
+ ssl_dh_params = "etc/dh.pem";
- /* max_clients: this should be set to the maximum amount of clients
- * that the server should support. Note that you should leave some
- * file descriptors free for log files, server connections, ident
- * lookups (if enabled), exceed_limit clients, etc.
+ /* ssld_count: number of ssld processes you want to start, if you have a really busy
+ * server, using N-1 where N is the number of cpu/cpu cores you have might be useful
*/
- max_clients = 1024;
+ ssld_count = 1;
+
+ /* default max clients: the default maximum number of clients
+ * allowed to connect. This can be changed once ircd has started by
+ * issuing:
+ * /quote set maxclients <limit>
+ */
+ default_max_clients = 1024;
};
/* admin {}: contains admin information about the server. (OLD A:) */
* - operlog: /oper usage
* - foperlog: failed /oper usage
* - serverlog: server connects/disconnects
- * - glinelog: glines
* - klinelog: klines, etc
* - killlog: kills
* - operspylog: operspy usage
fname_operlog = "logs/operlog";
#fname_foperlog = "logs/foperlog";
fname_serverlog = "logs/serverlog";
- fname_glinelog = "logs/glinelog";
#fname_klinelog = "logs/klinelog";
fname_killlog = "logs/killlog";
fname_operspylog = "logs/operspylog";
/* port: the specific port to listen on. if no host is specified
* before, it will listen on all available IPs.
*
+ * sslport: the specific port to listen ssl connections on. if no
+ * host is specified before, it will listen on all available IPs.
+ *
* ports are seperated via a comma, a range may be specified using ".."
*/
/* port: listen on all available IPs, ports 5000 and 6665 to 6669 */
port = 5000, 6665 .. 6669;
+
+ /* sslport: listen for ssl connections on all available IPs, port 9999 */
+ sslport = 9999;
/* host: set a specific IP/host the ports after the line will listen
* on. This may be ipv4 or ipv6.
*/
host = "1.2.3.4";
port = 7000, 7001;
+ sslport = 9000, 9001;
host = "3ffe:1234:a:b:c::d";
port = 7002;
+ sslport = 9002;
};
/* auth {}: allow users to connect to the ircd (OLD I:) */
auth {
- /* user: the user@host allowed to connect. multiple IPv4/IPv6 user
- * lines are permitted per auth block.
+ /* user: the user@host allowed to connect. Multiple IPv4/IPv6 user
+ * lines are permitted per auth block. This is matched against the
+ * hostname and IP address (using :: shortening for IPv6 and
+ * prepending a 0 if it starts with a colon) and can also use CIDR
+ * masks.
*/
user = "*@172.16.0.0/12";
user = "*test@123D:B567:*";
* exceed_limit (old > flag) | allow user to exceed class user limits
* kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls
* dnsbl_exempt | exempt this user from dnsbls
- * gline_exempt (old _ flag) | exempt this user from glines
* spambot_exempt | exempt this user from spambot checks
* shide_exempt | exempt this user from serverhiding
* jupe_exempt | exempt this user from generating
* USE WITH CAUTION.
* no_tilde (old - flag) | don't prefix ~ to username if no ident
* need_ident (old + flag) | require ident for user in this class
+ * need_ssl | require SSL/TLS for user in this class
* need_sasl | require SASL id for user in this class
*/
flags = kline_exempt, exceed_limit;
flags = need_ident;
};
-/* operator {}: defines ircd operators. (OLD O:)
- * charybdis no longer supports local operators, privileges are
- * controlled via flags.
- */
+/* privset{}: defines operator privilege sets. */
+privset "local_op" {
+ /* privs: controls the activities and commands an oper is
+ * allowed to do on the server
+ *
+ * Available options:
+ *
+ * oper:local_kill: allows local users to be /KILL'd
+ * oper:global_kill: allows local and remote users to be /KILL'd
+ * oper:routing: allows remote SQUIT and CONNECT
+ * oper:kline: allows KLINE and DLINE
+ * oper:unkline: allows UNKLINE and UNDLINE
+ * snomask:nick_changes: allows oper to see nickchanges via snomask +n
+ * oper:rehash: allows oper to REHASH config
+ * oper:die: allows DIE and RESTART
+ * oper:admin: gives admin privileges. admins
+ * may (un)load modules and see various
+ * additional information.
+ * oper:hidden_admin: gives admin privileges except
+ * will not have the admin lines in
+ * whois.
+ * oper:xline: allows use of /quote xline/unxline
+ * oper:resv: allows /quote resv/unresv and cmode +LP
+ * oper:operwall: allows the oper to send/receive operwalls
+ * oper:spy: allows 'operspy' features to see through +s
+ * channels etc. see /quote help operspy
+ * oper:hidden: hides the oper from /stats p
+ * oper:remoteban: allows remote kline etc
+ * oper:mass_notice: allows sending wallops and mass notices
+ */
+ privs = oper:local_kill, oper:operwall;
+};
+
+privset "server_bot" {
+ /* extends: a privset to inherit in this privset */
+ extends = "local_op";
+ privs = oper:global_kill, oper:kline, oper:remoteban, snomask:nick_changes;
+};
+
+privset "global_op" {
+ extends = "local_op";
+ privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
+ oper:resv, oper:mass_notice, oper:remoteban;
+};
+
+privset "admin" {
+ extends = "global_op";
+ privs = oper:admin, oper:die, oper:rehash, oper:spy;
+};
+
+/* operator {}: defines ircd operators. (OLD O:) */
operator "god" {
/* name: the name of the oper must go above */
*/
snomask = "+Zbfkrsuy";
- /* privileges: controls the activities and commands an oper is
- * allowed to do on the server. You may prefix an option with ~ to
- * disable it, ie ~operwall
+ /* flags: misc options for the operator. You may prefix an option
+ * with ~ to disable it, e.g. ~encrypted.
*
- * Default flags are operwall, remoteban and encrypted.
+ * Default flags are encrypted.
*
* Available options:
*
* encrypted: the password above is encrypted [DEFAULT]
- * local_kill: allows local users to be /KILL'd
- * global_kill: allows local and remote users to be
- * /KILL'd (OLD 'O' flag)
- * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
- * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
- * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
- * gline: allows GLINE (OLD 'G' flag)
- * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
- * via usermode +n
- * rehash: allows oper to REHASH config (OLD 'H' flag)
- * die: allows DIE and RESTART (OLD 'D' flag)
- * admin: gives admin privileges. admins
- * may (un)load modules and see the
- * real IPs of servers.
- * hidden_admin: gives admin privileges except
- * will not have the admin lines in
- * stats p and whois.
- * xline: allows use of /quote xline/unxline
- * operwall: allows the oper to send operwalls [DEFAULT]
- * oper_spy: allows 'operspy' features to see through +s
- * channels etc. see /quote help operspy
- * hidden_oper: hides the oper from /stats p (OLD UMODE +p)
- * remoteban: allows remote kline etc [DEFAULT]
+ * need_ssl: must be using SSL/TLS to oper up
*/
- flags = global_kill, remote, kline, unkline, gline,
- die, rehash, admin, xline, operwall;
+ flags = encrypted;
+
+ /* privset: privileges set to grant */
+ privset = "admin";
};
/* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
* autoconn - automatically connect to this server
* compressed - compress traffic via ziplinks
* topicburst - burst topics between servers
+ * ssl - ssl/tls encrypted server connections
*/
flags = compressed, topicburst;
};
connect "ipv6.some.server" {
+ /* Hosts that are IPv6 addresses must be in :: shortened form
+ * if applicable. Addresses starting with a colon get an extra
+ * zero prepended, for example: 0::1
+ */
host = "3ffd:dead:beef::1";
send_password = "password";
accept_password = "password";
class = "server";
};
+connect "ssl.uplink.com" {
+ /* Example of ssl server-to-server connection, ssl flag doesn't need
+ * compressed flag, 'cause it uses own compression
+ */
+ host = "192.168.0.1";
+ send_password = "password";
+ accept_password = "anotherpassword";
+ port = 9999;
+ hub_mask = "*";
+ class = "server";
+ flags = ssl, topicburst;
+};
+
/* cluster {}; servers that we propagate things to automatically.
* NOTE: This does NOT grant them privileges to apply anything locally,
* you must add a seperate shared block for that. Clustering will
* all - allow oper/server to do all of above.
* locops - allow locops - only used for servers who cluster
* rehash - allow rehashing
+ * dline - allow setting perm/temp dlines
+ * tdline - allow setting temp dlines
+ * undline - allow removing dlines
* none - disallow everything
*/
/* The serverhide block contains the options regarding serverhiding */
serverhide {
- /* flatten links: this option will show all servers in /links appear
- * that they are linked to this current server
+ /* flatten links: this option will hide various routing information
+ * and make all servers in /links appear that they are linked to
+ * this server.
*/
flatten_links = no;
- /* links delay: how often to update the links file when it is
- * flattened.
+ /* links delay: how long to wait before showing splits or new
+ * servers in a flattened /links output.
*/
links_delay = 5 minutes;
- /* hidden: hide this server from a /links output on servers that
- * support it. this allows hub servers to be hidden etc.
+ /* hidden: hide this server from a /links output on servers with
+ * flatten_links enabled. this allows hub servers to be hidden etc.
*/
hidden = no;
* ${nick} - the user's nickname
* ${network-name} - the name of the network
*
- * Note: AHBL (the providers of the below BLs) request that they be
+ * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be
* contacted, via email, at admins@2mbit.com before using these BLs.
* See <http://www.ahbl.org/services.php> for more information.
*/
-#blacklist {
+blacklist {
+ host = "dnsbl.dronebl.org";
+ reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
+
# host = "ircbl.ahbl.org";
# reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect.";
#
# host = "tor.ahbl.org";
# reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network.";
-#};
+};
/*
* Alias blocks allow you to define custom commands. (Old m_sshortcut.c)
*/
general {
/* hide error messages: defines whether error messages from
- * servers are hidden or not. These can sometimes contain IPs and
- * can have an adverse effect on server ip hiding. Set to:
+ * servers that are not deemed fully safe are hidden or not.
+ * These can sometimes contain IPs and can have an adverse
+ * effect on server ip hiding. Set to:
* yes: hide from opers and admin
* opers: hide from opers only
* no: do not hide error messages
+ * Admins on other servers count as opers.
*/
hide_error_messages = opers;
*/
dots_in_ident=2;
- /* dot in ipv6: ircd-hybrid-6.0 and earlier will disallow hosts
- * without a '.' in them. this will add one to the end. only needed
- * for older servers.
- */
- dot_in_ip6_addr = no;
-
/* min nonwildcard: the minimum non wildcard characters in k/d/g lines
* placed via the server. klines hand placed are exempt from limits.
* wildcard chars: '.' '*' '?' '@'
*/
kline_delay = 0 seconds;
- /* kline reason: show the user the reason why they are k/d/glined
+ /* kline reason: show the user the reason why they are k/dlined
* on exit. may give away who set k/dline when set via tcm.
*/
kline_with_reason = yes;
/* no oper flood: increase flood limits for opers. */
no_oper_flood = yes;
- /* glines: enable glines, network wide temp klines */
- glines = no;
-
- /* gline time: the amount of time a gline will remain before expiring */
- gline_time = 1 day;
-
- /* gline_min_cidr: If using a CIDR gline, the minimum length the
- * mask must be
- */
- gline_min_cidr = 16;
-
- /* idletime: the maximum amount of time a user may idle before
- * they are disconnected
- */
- idletime = 0;
-
/* REMOVE ME. The following line checks you've been reading. */
havent_read_conf = yes;
* provided they have umode +s set */
oper_snomask = "+s";
- /* servlink path: path to 'servlink' program used by ircd to handle
- * encrypted/compressed server <-> server links.
- *
- * only define if servlink is not in same directory as ircd itself.
- */
- #servlink_path = "/usr/local/ircd/bin/servlink";
-
/* use egd: if your system does not have *random devices yet you
* want to use OpenSSL and encrypted links, enable this. Beware -
* EGD is *very* CPU intensive when gathering data for its pool
/* reject duration: the amount of time to cache the rejection */
reject_duration = 5 minutes;
- /* max_unknown_ip: maximum number of pending connections to the server
- * that are allowed per IP address
+ /* throttle_duration: Amount of time that throttling will be applied to an IP
+ * address.
*/
- max_unknown_ip = 2;
+ throttle_duration = 60;
+
+ /* throttle_count: Number of connections within throttle_duration that it takes
+ * for throttling to take effect */
+ throttle_count = 4;
};
modules {