X-Git-Url: https://jfr.im/git/irc/rqf/shadowircd.git/blobdiff_plain/e2ec3f7d01ab9759baf7ec3642d52e6d746710a1..b7ec30945180fc81ef6747c5a33d3182f7e9fc95:/doc/reference.conf diff --git a/doc/reference.conf b/doc/reference.conf index d5d3365..6c8fbb0 100755 --- a/doc/reference.conf +++ b/doc/reference.conf @@ -18,6 +18,9 @@ * that matches a user will be used. So place spoofs first, then specials, * then general access, then restricted. * + * privset {} blocks MUST be specified before anything that uses them. That + * means they must be defined before operator {}. + * * Both shell style (#) and C style comments are supported. * * Files may be included by either: @@ -38,9 +41,13 @@ /* Extensions: * - * Charybdis contains several extensions that are not enabled by default. - * To use them, uncomment the lines below. + * ShadowIRCd contains several extensions that are not enabled by default. + * To use them, uncomment the lines below. More information on each extension + * can be found in extensions/README * + * Channel mode +-A (admin only) -- chm_adminonly.so + * Channel mode +-O (oper only) -- chm_operonly.so + * Channel mode +-S (ssl only) -- chm_sslonly.so * Emulates channel mode +-O (oper only) (+-iI $o) -- chm_operonly_compat.so * Emulates channel mode +-R (quiet unreg) (+-q $~a) -- chm_quietunreg_compat.so * Emulates channel mode +-S (ssl only) (+-b $~z) -- chm_sslonly_compat.so @@ -54,7 +61,7 @@ * Server bans (+b $s:mask) -- extb_server.so * SSL bans (+b $z) -- extb_ssl.so * HURT system -- hurt.so - * Host mangling (umode +h) -- ip_cloaking.so + * New host mangling (umode +x) -- ip_cloaking.so * Find channel forwards -- m_findforwards.so * /identify support -- m_identify.so * Opers cannot be invisible (umode +i) -- no_oper_invis.so @@ -62,28 +69,33 @@ * Remote k/d/x line active notices -- sno_globalkline.so * Remote oper up notices -- sno_globaloper.so * /whois notifications (snomask +W) -- sno_whois.so + * Force join users to channels -- m_force.so */ +#loadmodule "extensions/chm_adminonly.so"; +loadmodule "extensions/chm_operonly.so"; +#loadmodule "extensions/chm_sslonly.so"; #loadmodule "extensions/chm_operonly_compat.so"; #loadmodule "extensions/chm_quietunreg_compat.so"; #loadmodule "extensions/chm_sslonly_compat.so"; #loadmodule "extensions/createauthonly.so"; -#loadmodule "extensions/extb_account.so"; -#loadmodule "extensions/extb_canjoin.so"; -#loadmodule "extensions/extb_channel.so"; -#loadmodule "extensions/extb_extgecos.so"; -#loadmodule "extensions/extb_oper.so"; -#loadmodule "extensions/extb_realname.so"; +loadmodule "extensions/extb_account.so"; +loadmodule "extensions/extb_canjoin.so"; +loadmodule "extensions/extb_channel.so"; +loadmodule "extensions/extb_extgecos.so"; +loadmodule "extensions/extb_oper.so"; +loadmodule "extensions/extb_realname.so"; #loadmodule "extensions/extb_server.so"; #loadmodule "extensions/extb_ssl.so"; #loadmodule "extensions/hurt.so"; -#loadmodule "extensions/ip_cloaking.so"; +loadmodule "extensions/ip_cloaking.so"; #loadmodule "extensions/m_findforwards.so"; -#loadmodule "extensions/m_identify.so"; +loadmodule "extensions/m_identify.so"; #loadmodule "extensions/no_oper_invis.so"; -#loadmodule "extensions/sno_farconnect.so"; -#loadmodule "extensions/sno_globalkline.so"; -#loadmodule "extensions/sno_globaloper.so"; +loadmodule "extensions/sno_farconnect.so"; +loadmodule "extensions/sno_globalkline.so"; +loadmodule "extensions/sno_globaloper.so"; #loadmodule "extensions/sno_whois.so"; +#loadmodule "extensions/m_force.so"; /* serverinfo {}: Contains information about the server. (OLD M:) */ serverinfo { @@ -101,7 +113,7 @@ serverinfo { /* description: the description of our server. '[' and ']' may not * be used here for compatibility with older servers. */ - description = "charybdis test server"; + description = "shadowircd test server"; /* network info: the name and description of the network this server * is on. Shown in the 005 reply and used with serverhiding. @@ -133,8 +145,11 @@ serverinfo { /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */ ssl_dh_params = "etc/dh.pem"; - /* ssld_count: number of ssld processes you want to start, if you have a really busy - * server, using N-1 where N is the number of cpu/cpu cores you have might be useful + /* ssld_count: number of ssld processes you want to start, if you + * have a really busy server, using N-1 where N is the number of + * cpu/cpu cores you have might be useful. A number greater than one + * can also be useful in case of bugs in ssld and because ssld needs + * two file descriptors per SSL connection. */ ssld_count = 1; @@ -204,19 +219,19 @@ class "users" { */ number_per_ip_global = 5; - /* cidr_bitlen: Limits numbers of connections from a subnet size + /* cidr_ipv4_bitlen: Limits numbers of connections from a subnet size + */ + cidr_ipv4_bitlen = 24; + + /* cidr_ipv6_bitlen: Limits numbers of connections from a subnet size * the following example makes the subnet /64 this is useful * for IPv6 connections in particular - * Also note that the way charybdis is written if you have - * compiled support for IPv6, IPv4 cidr bitlens need to be modified - * Basically to get the approriate length add 96 to the IPv4 length - * For example for a /24 do 96+24 = 120 - * */ - cidr_bitlen = 64; + cidr_ipv6_bitlen = 64; /* number_per_cidr: Number of connections to allow from a subnet of the - * size given in cidr_bitlen. 4 seems to be a good default to me. + * size given in cidr_ipv4_bitlen/cidr_ipv6_bitlen. + * 4 seems to be a good default to me. */ number_per_cidr = 4; @@ -310,6 +325,17 @@ auth { */ spoof = "I.still.hate.packets"; + /* autojoin: Channel (or channels, comma-seperated) to join users + * in this auth block to on connect. Note that this won't join + * the user through any bans or otherwise restrictive chmodes. + */ + autojoin = "#shadowircd,#test"; + + /* autojoin_opers : Channel (or channels, comma-seperated) to join + * opers to on oper-up. + */ + autojoin_opers = "#opers,#help"; + /* Possible flags in auth: * * encrypted | password is encrypted with mkpasswd @@ -326,6 +352,7 @@ auth { * USE WITH CAUTION. * no_tilde (old - flag) | don't prefix ~ to username if no ident * need_ident (old + flag) | require ident for user in this class + * need_ssl | require SSL/TLS for user in this class * need_sasl | require SASL id for user in this class */ flags = kline_exempt, exceed_limit; @@ -355,10 +382,57 @@ auth { flags = need_ident; }; -/* operator {}: defines ircd operators. (OLD O:) - * charybdis no longer supports local operators, privileges are - * controlled via flags. - */ +/* privset{}: defines operator privilege sets. */ +privset "local_op" { + /* privs: controls the activities and commands an oper is + * allowed to do on the server + * + * Available options: + * + * oper:local_kill: allows local users to be /KILL'd + * oper:global_kill: allows local and remote users to be /KILL'd + * oper:routing: allows remote SQUIT and CONNECT + * oper:kline: allows KLINE and DLINE + * oper:unkline: allows UNKLINE and UNDLINE + * snomask:nick_changes: allows oper to see nickchanges via snomask +n + * oper:rehash: allows oper to REHASH config + * oper:die: allows DIE and RESTART + * oper:admin: gives admin privileges. admins + * may (un)load modules and see various + * additional information. + * oper:hidden_admin: gives admin privileges except + * will not have the admin lines in + * whois. + * oper:xline: allows use of /quote xline/unxline + * oper:resv: allows /quote resv/unresv and cmode +LP + * oper:operwall: allows the oper to send/receive operwalls + * oper:spy: allows 'operspy' features to see through +s + * channels etc. see /quote help operspy + * oper:hidden: hides the oper from /stats p + * oper:remoteban: allows remote kline etc + * oper:mass_notice: allows sending wallops and mass notices + */ + privs = oper:local_kill, oper:operwall; +}; + +privset "server_bot" { + /* extends: a privset to inherit in this privset */ + extends = "local_op"; + privs = oper:kline, oper:remoteban, snomask:nick_changes; +}; + +privset "global_op" { + extends = "local_op"; + privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline, + oper:resv, oper:mass_notice, oper:remoteban; +}; + +privset "admin" { + extends = "global_op"; + privs = oper:admin, oper:die, oper:rehash, oper:spy; +}; + +/* operator {}: defines ircd operators. (OLD O:) */ operator "god" { /* name: the name of the oper must go above */ @@ -381,6 +455,12 @@ operator "god" { */ #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub"; + /* fingerprint: if specified, the oper's client certificate + * fingerprint will be checked against the specified fingerprint + * below. + */ + #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b"; + /* umodes: the specific umodes this oper gets when they oper. * If this is specified an oper will not be given oper_umodes * These are described above oper_only_umodes in general {}; @@ -392,42 +472,20 @@ operator "god" { */ snomask = "+Zbfkrsuy"; - /* privileges: controls the activities and commands an oper is - * allowed to do on the server. You may prefix an option with ~ to - * disable it, ie ~operwall + /* flags: misc options for the operator. You may prefix an option + * with ~ to disable it, e.g. ~encrypted. * - * Default flags are operwall, remoteban and encrypted. + * Default flags are encrypted. * * Available options: * * encrypted: the password above is encrypted [DEFAULT] - * local_kill: allows local users to be /KILL'd - * global_kill: allows local and remote users to be - * /KILL'd (OLD 'O' flag) - * remote: allows remote SQUIT and CONNECT (OLD 'R' flag) - * kline: allows KLINE and DLINE (OLD 'K' flag) - * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag) - * nick_changes: allows oper to see nickchanges (OLD 'N' flag) - * via snomask +n - * rehash: allows oper to REHASH config (OLD 'H' flag) - * die: allows DIE and RESTART (OLD 'D' flag) - * admin: gives admin privileges. admins - * may (un)load modules and see the - * real IPs of servers. - * hidden_admin: gives admin privileges except - * will not have the admin lines in - * stats p and whois. - * xline: allows use of /quote xline/unxline - * resv: allows /quote resv/unresv and cmode +LP [DEFAULT] - * operwall: allows the oper to send/receive operwalls [DEFAULT] - * oper_spy: allows 'operspy' features to see through +s - * channels etc. see /quote help operspy - * hidden_oper: hides the oper from /stats p (OLD UMODE +p) - * remoteban: allows remote kline etc [DEFAULT] - * mass_notice: allows sending wallops and mass notices [DEFAULT] + * need_ssl: must be using SSL/TLS to oper up */ - flags = global_kill, remote, kline, unkline, - die, rehash, admin, xline, operwall; + flags = encrypted; + + /* privset: privileges set to grant */ + privset = "admin"; }; /* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */ @@ -580,6 +638,9 @@ shared { * all - allow oper/server to do all of above. * locops - allow locops - only used for servers who cluster * rehash - allow rehashing + * dline - allow setting perm/temp dlines + * tdline - allow setting temp dlines + * undline - allow removing dlines * none - disallow everything */ @@ -695,6 +756,29 @@ channel { * ratbox-services does. */ kick_on_split_riding = no; + + /* only ascii channels: disable local users joining channels + * containing characters outside the range 33-126 (non-printable + * or non-ASCII). + */ + only_ascii_channels = no; + + /* cycle_host_change: Should a user be cycled in the channels + * they're in when their host changes. If set to no, this may + * cause client desyncs. + */ + cycle_host_change = yes; + + /* host_in_topic: Defines whether or not the topicsetter's + * host is shown when users request the TOPIC. If this option + * is set to no, it will only show the nick of the topicsetter. + */ + host_in_topic = yes; + + /* resv_forcepart: force any local users to part a channel + * when a RESV is issued. + */ + resv_forcepart = yes; }; @@ -724,7 +808,7 @@ serverhide { /* These are the blacklist settings. * You can have multiple combinations of host and rejection reasons. - * They are used in pairs of one host/rejection reason, or multiple hosts/rejection reason. + * They are used in pairs of one host/rejection reason. * * These settings should be adequate for most networks, and are (presently) * required for use on AthemeNet. @@ -784,6 +868,14 @@ alias "MemoServ" { target = "MemoServ"; }; +alias "HostServ" { + target = "HostServ"; +}; + +alias "BotServ" { + target = "BotServ"; +}; + alias "NS" { target = "NickServ"; }; @@ -800,6 +892,14 @@ alias "MS" { target = "MemoServ"; }; +alias "HS" { + target = "HostServ"; +}; + +alias "BS" { + target = "BotServ"; +}; + /* The general block contains many of the options that were once compiled * in options in config.h. The general block is read at start time. */ @@ -826,10 +926,10 @@ general { /* default umodes: umodes to set upon connection * If you have enabled the ip_cloaking extension, and you wish for - * incoming clients to be set +h upon connection, add +h to the umode - * string below. + * incoming clients to be cloaked upon connection, +x must be in + * the umode string below. */ - default_umodes = "+i"; + default_umodes = "+ix"; /* default operstring: defines the default oper response * in /whois queries, eg "is an IRC Operator". @@ -1019,6 +1119,12 @@ general { * protected. */ operspy_dont_care_user_info = no; + /* secret channels in whois: display secret channels in /whois + * even if operspy was not used, as long as the oper doing the + * whois has the oper:spy priv. this will not send any kind of + * server notice. */ + secret_channels_in_whois = no; + /* caller id wait: time between notifying a +g user that somebody * is messaging them. */ @@ -1097,13 +1203,6 @@ general { * provided they have umode +s set */ oper_snomask = "+s"; - /* servlink path: path to 'servlink' program used by ircd to handle - * encrypted/compressed server <-> server links. - * - * only define if servlink is not in same directory as ircd itself. - */ - #servlink_path = "/usr/local/ircd/bin/servlink"; - /* use egd: if your system does not have *random devices yet you * want to use OpenSSL and encrypted links, enable this. Beware - * EGD is *very* CPU intensive when gathering data for its pool @@ -1150,10 +1249,14 @@ general { /* reject duration: the amount of time to cache the rejection */ reject_duration = 5 minutes; - /* max_unknown_ip: maximum number of pending connections to the server - * that are allowed per IP address + /* throttle_duration: Amount of time that throttling will be applied to an IP + * address. */ - max_unknown_ip = 2; + throttle_duration = 60; + + /* throttle_count: Number of connections within throttle_duration that it takes + * for throttling to take effect */ + throttle_count = 4; }; modules {