#loadmodule "extensions/extb_server.so";
#loadmodule "extensions/extb_ssl.so";
#loadmodule "extensions/hurt.so";
-#loadmodule "extensions/ip_cloaking.so";
#loadmodule "extensions/m_findforwards.so";
#loadmodule "extensions/m_identify.so";
#loadmodule "extensions/no_oper_invis.so";
#loadmodule "extensions/sno_globaloper.so";
#loadmodule "extensions/sno_whois.so";
+/*
+ * IP cloaking extensions: use ip_cloaking_4.0
+ * if you're linking 3.2 and later, otherwise use
+ * ip_cloaking.so, for compatibility with older 3.x
+ * releases.
+ */
+
+#loadmodule "extensions/ip_cloaking_4.0.so";
+#loadmodule "extensions/ip_cloaking.so";
+
serverinfo {
name = "hades.arpa";
sid = "42X";
- description = "charybdis test server";
+ description = "shadowircd test server";
network_name = "AthemeNET";
network_desc = "Your IRC network.";
hub = yes;
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
ssl_dh_params = "etc/dh.pem";
- /* ssld_count: number of ssld processes you want to start, if you have a really busy
- * server, using N-1 where N is the number of cpu/cpu cores you have might be useful
+ /* ssld_count: number of ssld processes you want to start, if you
+ * have a really busy server, using N-1 where N is the number of
+ * cpu/cpu cores you have might be useful. A number greater than one
+ * can also be useful in case of bugs in ssld and because ssld needs
+ * two file descriptors per SSL connection.
*/
ssld_count = 1;
*/
class "users" {
ping_time = 2 minutes;
- number_per_ident = 10;
+ number_per_ident = 10;
number_per_ip = 10;
- number_per_ip_global = 50;
- cidr_bitlen = 64;
- number_per_cidr = 8;
+ number_per_ip_global = 50;
+ cidr_ipv4_bitlen = 24;
+ cidr_ipv6_bitlen = 64;
+ number_per_cidr = 200;
max_number = 3000;
sendq = 400 kbytes;
};
*/
spoof = "I.still.hate.packets";
+ /* autojoin: Channel (or channels, comma-seperated) to join users
+ * in this auth block to on connect. Note that this won't join
+ * the user through any bans or otherwise restrictive chmodes.
+ */
+ autojoin = "#shadowircd,#test";
+
+ /* autojoin_opers : Channel (or channels, comma-seperated) to join
+ * opers to on oper-up.
+ */
+ autojoin_opers = "#opers,#help";
+
/* Possible flags in auth:
*
* encrypted | password is encrypted with mkpasswd
privset "server_bot" {
extends = "local_op";
- privs = oper:global_kill, oper:kline, oper:remoteban, snomask:nick_changes;
+ privs = oper:kline, oper:remoteban, snomask:nick_changes;
};
privset "global_op" {
*/
#umodes = locops, servnotice, operwall, wallop;
+ /* fingerprint: if specified, the oper's client certificate
+ * fingerprint will be checked against the specified fingerprint
+ * below.
+ */
+ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
/* snomask: specific server notice mask on oper up.
* If this is specified an oper will not be given oper_snomask.
*/
no_join_on_split = no;
burst_topicwho = yes;
kick_on_split_riding = no;
+ only_ascii_channels = no;
+ cycle_host_change = yes;
+ resv_forcepart = yes;
};
serverhide {
/* These are the blacklist settings.
* You can have multiple combinations of host and rejection reasons.
- * They are used in pairs of one host/rejection reason, or multiple hosts/rejection reason.
+ * They are used in pairs of one host/rejection reason.
*
* These settings should be adequate for most networks, and are (presently)
* required for use on AthemeNet.
/*
* default_umodes: umodes to enable on connect.
- * If you have enabled the ip_cloaking module, and you want
+ * If you have enabled the new ip_cloaking_4.0 module, and you want
+ * to make use of it, add +x to this option, i.e.:
+ * default_umodes = "+ix";
+ *
+ * If you have enabled the old ip_cloaking module, and you want
* to make use of it, add +h to this option, i.e.:
* default_umodes = "+ih";
*/