-/* doc/reference.conf - charybdis Example configuration file
+/* doc/reference.conf - shadowircd Example configuration file
*
* Copyright (C) 2000-2002 Hybrid Development Team
* Copyright (C) 2002-2005 ircd-ratbox development team
* Copyright (C) 2005-2006 charybdis development team
*
- * Written by ejb, wcampbel, db, leeh and others
+ * Written by ejb, wcampbel, db, leeh, Taros, jdhore and others
*
* $Id: reference.conf 3582 2007-11-17 21:55:48Z jilles $
*/
* New host mangling (umode +x) -- ip_cloaking.so
* Find channel forwards -- m_findforwards.so
* /identify support -- m_identify.so
+ * /mkpassword support -- m_mkpasswd.so
+ * WEBIRC support -- m_webirc.so
+ * Server-side /CYCLE -- m_cycle.so
+ * /oaccept - add to target's accept list, oper only -- m_oaccept.so
+ * /opme - op self in opless channels, admin only -- m_opme.so
+ * /ojoin - join despite restrictions, admin only -- m_ojoin.so
+ * /omode - force modes in channels, admin only -- m_omode.so
+ * /olist - see all channels in /list, oper only -- m_olist.so
+ * /okick - kick users without having ops, oper only -- m_okick.so
+ * /forcejoin - force join users, admin only -- m_force.so
* Opers cannot be invisible (umode +i) -- no_oper_invis.so
* Far connection notices (snomask +F) -- sno_farconnect.so
* Remote k/d/x line active notices -- sno_globalkline.so
* Remote oper up notices -- sno_globaloper.so
* /whois notifications (snomask +W) -- sno_whois.so
- * Force join users to channels -- m_force.so
*/
#loadmodule "extensions/chm_adminonly.so";
loadmodule "extensions/chm_operonly.so";
loadmodule "extensions/ip_cloaking.so";
#loadmodule "extensions/m_findforwards.so";
loadmodule "extensions/m_identify.so";
+loadmodule "extensions/m_mkpasswd.so";
+loadmodule "extensions/m_webirc.so";
+#loadmodule "extensions/m_cycle.so";
+#loadmodule "extensions/m_oaccept.so";
+#loadmodule "extensions/m_opme.so";
+#loadmodule "extensions/m_ojoin.so";
+#loadmodule "extensions/m_omode.so";
+#loadmodule "extensions/m_olist.so";
+#loadmodule "extensions/m_okick.so";
+#loadmodule "extensions/m_force.so";
#loadmodule "extensions/no_oper_invis.so";
loadmodule "extensions/sno_farconnect.so";
loadmodule "extensions/sno_globalkline.so";
loadmodule "extensions/sno_globaloper.so";
#loadmodule "extensions/sno_whois.so";
-#loadmodule "extensions/m_force.so";
+
/* serverinfo {}: Contains information about the server. (OLD M:) */
serverinfo {
network_name = "MyNet";
network_desc = "This is My Network";
+ /* helpchan/helpurl: These 2 items are shown when a user does
+ * /quote help with no additional parameters to direct them
+ * to a channel/URL where they can get more or network-specific help.
+ * They can be commented out and will not show to users if they are.
+ */
+ helpchan = "#help";
+ helpurl = "http://www.mynet.net/help";
+
/* hub: allow this server to act as a hub and have multiple servers
* connected to it.
*/
#vhost6 = "3ffe:80e8:546::2";
/* ssl_private_key: our ssl private key */
- ssl_private_key = "etc/test.key";
+ ssl_private_key = "etc/ssl.key";
/* ssl_cert: certificate for our ssl server */
- ssl_cert = "etc/test.cert";
+ ssl_cert = "etc/ssl.cert";
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
ssl_dh_params = "etc/dh.pem";
class = "opers";
};
+/* Example WEBIRC authblock */
+auth {
+ /* user: webirc@IP.OF.YOUR.WEBIRC . the webirc@ part is required */
+ user = "webirc@192.168.1.1";
+
+ /* password: password the webirc client sends in the WEBIRC command.
+ * You can use a encrypted password here (see above auth block).
+ */
+ password = "<password>";
+
+ /* spoof: This is required to keep it what it is currently if you
+ * want the webirc client to show the users' real host as their
+ * host on IRC.
+ */
+ spoof = "webirc.";
+ class = "users";
+};
+
auth {
/* redirect: the server and port to redirect a user to. A user does
* not have to obey the redirection, the ircd just suggests to them
* oper:xline: allows use of /quote xline/unxline
* oper:resv: allows /quote resv/unresv and cmode +LP
* oper:operwall: allows the oper to send/receive operwalls
+ * oper:override: allows the oper to set umode +p on themself
+ which grants the ability to have implicit
+ operator access in all channels.
* oper:spy: allows 'operspy' features to see through +s
* channels etc. see /quote help operspy
* oper:hidden: hides the oper from /stats p
privset "admin" {
extends = "global_op";
- privs = oper:admin, oper:die, oper:rehash, oper:spy;
+ privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:override;
};
/* operator {}: defines ircd operators. (OLD O:) */
/* snomask: specific server notice mask on oper up.
* If this is specified an oper will not be given oper_snomask.
*/
- snomask = "+Zbfkrsuy";
+ snomask = "+FZbcfkrsuy";
+
+ /* vhost: defines the vhost that this oper will get on oper up.
+ * this must be a valid hostmask. If this is specified the oper
+ * will not be given default_operhost.
+ */
+ vhost = "is.an.oper";
+
+ /* swhois: defines an additional line that will be displayed
+ * whenever someone does /whois on the oper in question.
+ */
+ swhois = "is wearing pants.";
+
+ /* operstring: defines a custom operstring for this oper,
+ * which will be shown in whois instead of default_operstring
+ * or default_adminstring.
+ */
+ operstring = "is a lazy IRC Operator";
/* flags: misc options for the operator. You may prefix an option
* with ~ to disable it, e.g. ~encrypted.
* resv - allow setting perm/temp resvs
* tresv - allow setting temp resvs
* unresv - allow removing xlines
+ * rehash - allow rehashing
* all - allow oper/server to do all of above.
* locops - allow locops - only used for servers who cluster
- * rehash - allow rehashing
+ * die - allow restarting/dying of servers
+ * modules - allow loading/unloading/reloading of modules
* dline - allow setting perm/temp dlines
* tdline - allow setting temp dlines
* undline - allow removing dlines
/* The channel block contains options pertaining to channels */
channel {
- /* invex: Enable/disable channel mode +I, a n!u@h list of masks
- * that can join a +i channel without an invite.
+ /* disabledmodes: Modes that will be disabled, users will not be
+ * able to set them. This is only read on startup, you need to
+ * restart the ircd for this to have any effect. This only prevents
+ * local users/opers from setting these modes. This does not prevent
+ * remote servers/users (ex: services) from setting them. Make sure
+ * your services and remote servers are properly configured when
+ * using this option!
+ * Valid parameters are: CLPFQITDENGJKMrczgqefj
+ */
+ #disabledmodes = "ME";
+
+ /* autochanmodes: Modes that will be set on a unregistered channel
+ * when the first user joins it.
+ */
+ autochanmodes = "nt";
+
+ /* admin_on_channel_create: If set to yes, users joining new channels
+ * will be given +ao instead of just +o. Requires use_admin.
*/
- use_invex = yes;
+ admin_on_channel_create = no;
- /* except: Enable/disable channel mode +e, a n!u@h list of masks
- * that can join a channel through a ban (+b).
+ /* exemptchanops: Channel modes that any form of channel ops (+aoh)
+ * will be exempt from. Even if the mode is set, it will not apply to the
+ * channel ops if it is listed in this option. Valid modes are cCDTNGK.
*/
- use_except = yes;
+ exemptchanops = "NT";
- /* forward: Enable/disable channel mode +f, a channel to forward
- * users to if they can't join because of +i etc.
+ /* halfop: Enable/disable channel mode +h, which adds halfop,
+ * a channel status below op that has op powers (kick, ban, mode, etc.)
+ * halfops can only kick/devoice/etc people who are +v or
+ * do not have any channel status. Disabling this via rehash will
+ * cause things which are rather confusing to occur, it is highly
+ * recommended to restart if you wish to disable this option, though
+ * it may be enabled by rehash with no problems.
*/
- use_forward = yes;
+ use_halfop = yes;
+
+ /* admin: Enable/disable channel mode +a, which adds admin,
+ * a channel status above op that has op powers (kick, ban, mode, etc.)
+ * admins can only be kicked/deadmined by other admins, and may kick
+ * or deop anyone. Disabling this via rehash will cause things which
+ * are rather confusing to occur, it is highly recommended to restart
+ * if you wish to disable this option, though it may be enabled
+ * by rehash with no problems.
+ */
+ use_admin = yes;
/* knock: Allows users to request an invite to a channel that
* is locked somehow (+ikl). If the channel is +p or you are banned
*/
use_knock = yes;
+ /* local channels: &Channel - a channel that exists only on one server
+ * people on other servers will not be able to see or join local channels
+ * from another server.
+ */
+ use_local_channels = yes;
+
/* knock delay: The amount of time a user must wait between issuing
* the knock command.
*/
* when a RESV is issued.
*/
resv_forcepart = yes;
+
+ /* channel target change: restrict how many channels users can
+ * message per unit of time. IRC operators, channel operators and
+ * voiced users are exempt.
+ */
+ channel_target_change = yes;
};
serverhide {
/* flatten links: this option will hide various routing information
* and make all servers in /links appear that they are linked to
- * this server.
+ * this server. This option also disallows non-opers from using /map
*/
flatten_links = no;
* See <http://www.ahbl.org/services.php> for more information.
*/
blacklist {
+ host = "rbl.efnetrbl.org";
+ reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
+
host = "dnsbl.dronebl.org";
reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}";
target = "BotServ";
};
+alias "InfoServ" {
+ target = "InfoServ";
+};
+
+alias "GroupServ" {
+ target = "GroupServ";
+};
+
alias "NS" {
target = "NickServ";
};
target = "BotServ";
};
+alias "IS" {
+ target = "InfoServ";
+};
+
+alias "GS" {
+ target = "GroupServ";
+};
+
/* The general block contains many of the options that were once compiled
* in options in config.h. The general block is read at start time.
*/
*/
default_adminstring = "is a Server Administrator";
+ /* default operhost: defines the default virtual host that
+ * operators will receiving upon opering up. Can be overriden
+ * by the vhost option in individual operator blocks. This
+ * must be a valid hostmask.
+ */
+ default_operhost = "staff.testnet.net";
+
+ /* static quit: Quit message to display for all users (not opers)
+ * on QUIT.
+ */
+ #static_quit = "I like turtles!";
+
/* servicestring: defines the response for opered services (+S)
* in /whois queries, eg "is a Network Service".
* This is updated on rehash.
*/
disable_fake_channels = no;
+ /* hide_channel_below_users: Amount of users a channel must have in it
+ * before it is shown in a standard LIST. This can be overridden by
+ * invoking LIST like: /LIST <3
+ */
+ hide_channel_below_users = 3;
+
/* tkline_expire_notices: give a notice to opers when a tkline
* expires
*/
*/
min_nonwildcard_simple = 3;
- /* max accept: maximum allowed /accept's for +g usermode */
+ /* max accept: maximum allowed /accept's for +gGR usermodes */
max_accept = 20;
/* max monitor: the maximum amount of nicknames a client may have in
max_nick_time = 20 seconds;
max_nick_changes = 5;
- /* anti spam time: the minimum time a user must be connected before
+ /* anti spam time: the minimum time a user must be connected before
* custom quit messages are allowed.
*/
- anti_spam_exit_message_time = 5 minutes;
+ anti_spam_exit_message_time = 5 minutes;
+
+ /* use part messages: This option controls whether users should be
+ * allowed to send PART messages to channels. It should probably
+ * be set to no if static_quit is set.
+ */
+ use_part_messages = yes;
/* ts delta: the time delta allowed between server clocks before
* a warning is given, or before the link is dropped. all servers
/* kline reason: make the users quit message on channels this
* reason instead of the oper's reason.
*/
- kline_reason = "Connection closed";
+ kline_reason = "K-Lined";
/* identify to services via server password
* if auth{} block had no password but the user specified a
*/
warn_no_nline = yes;
+ /* use propagated bans: KLINE, XLINE and RESV set fully propagated bans.
+ * That means the bans are part of the netburst and restarted/split
+ * servers will get them, but they will not apply to 3.2 and older
+ * servers at all.
+ */
+ use_propagated_bans = yes;
+
/* stats e disabled: disable stats e. useful if server ips are
* exempted and you dont want them listing on irc.
*/
*/
connect_timeout = 30 seconds;
+ /* ident timeout: Amount of time (in seconds) that the IRCd will
+ * wait for a user to respond to an ident request.
+ */
+ default_ident_timeout = 5;
+
/* disable auth: disables identd checking */
disable_auth = no;
- /* no oper flood: increase flood limits for opers. */
+ /* no oper flood: increase flood limits for opers.
+ * This option quadruples the user command flood limits, it
+ * DOES NOT affect PRIVMSG/NOTICE usage.
+ */
no_oper_flood = yes;
+ /* true no oper flood: Allow opers to NEVER hit flood limits.
+ * With the above setting, flood limits are set to 4x what they
+ * are for normal users. With this setting, they're removed entirely.
+ * For this setting to work, you need to have no_oper_flood enabled as well.
+ * This option DOES allow PRIVMSG/NOTICE flooding.
+ * ENABLE THIS SETTING WITH CAUTION.
+ */
+ true_no_oper_flood = no;
+
/* REMOVE ME. The following line checks you've been reading. */
havent_read_conf = yes;
* +C - noctcp - Block CTCPs to user.
* +V - noinvite - Block INVITE to user.
* +B - bot - Marks as a bot.
+ * +p - override - Implicit operator access in all channels.
+ * This is oper-only and requires the oper:override priv.
*/
/* oper only umodes: usermodes only opers may set */
/* throttle_count: Number of connections within throttle_duration that it takes
* for throttling to take effect */
throttle_count = 4;
+
+ /* expire_override_time: User mode +p will be automatically unset
+ * this long after it is set. 0 disables this. Default is 5 minutes.
+ */
+ expire_override_time = 5 minutes;
};
modules {
projects / irc / rqf / shadowircd.git / blobdiff