-This is charybdis 3.2, Copyright (c) 2005-2010 Charybdis team.
+This is ShadowIRCd 6.1, Copyright (c) 2005-2010 ShadowIRCd team.
See LICENSE for licensing details (GPL v2).
+-- shadowircd-6.1.0
+
+new configuration options
+- general::static_quit - Quit message to display for all users (not opers).
+- general::no_part_messages - If this option is set to no, the ircd will not
+ display PART messages/reasons from users.
+- general::true_no_oper_flood - Turns off *ALL* flood protection for opers.
+ Instead of command flooding being 4x what it is for a user with no_oper_flood,
+ there is no limit at all. This option also allows opers to flood channels/users
+ so if you do set it, be extremely careful.
+- serverinfo::helpchan and helpurl - These are 2 config options that tell users,
+ when they do /quote help (with no extra parameters) the official network help
+ channel and a special URL for help. If these options are disabled, the users
+ will just get the help index and that's it on /quote help.
+
+new commands
+- /CYCLE - server-side /CYCLE, also called /HOP in some clients/servers.
+
+opers
+- Override no longer alows overriding opers to talk through +q, +m, etc.
+ If you need to talk through one of these modes, its recommended to remove
+ the offending mode or give yourself voice/ops.
+- OLIST now shows channel modes so opers can easily see which channels are
+ +s and see which channels have oper-only channel modes set.
+- RESTART and DIE now can be executed remotely. See the appropriate helpfiles
+ for details.
+- All module management commands (MODLOAD, MODLIST, MODUNLOAD, MODRELOAD and
+ MODRESTART) can be executed remotely. See the appropriate helpfile for
+ details.
+
+other
+- Added a strip_unprintable function to make evasion of cmodes +G and +K
+ less trivial.
+- Massive helpfile updates.
+- Added BAN stuff (propogated bans on burst) from charybdis trunk. This
+ can be disabled and the old behavior can be used by setting the
+ general::use_propogated_bans option to no.
+
+-- shadowircd-6.0.0
+
+new modes
+- Add umode +C (no CTCP).
+- Add umode +V, users with this mode set will never recieve channel invites
+ from other users.
+- Add umode +B which identifies users as being bots in /whois.
+- Add umode +G which disallows users from messaging you unless you're both
+ on at least one channel together. This can be "overridden" with /accept.
+- Add cmode +T which blocks all notices to the channel.
+- Add cmode +D which blocks all actions (/me's) from being sent to the channel.
+- Add cmode +E which disallows channel ops from kicking users.
+- Add cmode +N which disallows users from changing their nick while they're on
+ a channel with this mode set.
+- Add cmode +K (norepeat) which will block repeated messages, regardless of
+ who they're from.
+- Add cmode +G which blocks messages containing 50% or more capital letters
+ from being sent to the channel.
+- Add cmode +J which disallows a kicked user from rejoining within 'X' seconds
+ of them being kicked, where 'X' is the variable of the channel::kick_no_rejoin_time
+ configuration option.
+- Add cmodes +a and +h (admin and halfop, respectively). There are 2 extra
+ prefixes to more finely-grain the status of staff members in your channels.
+ They can be enabled or disabled in the configuration file with the options
+ channel::use_halfop and channel::use_admin.
+
+new configuration options
+- auth::autojoin - This option will specify what channels users in a matching
+ auth {} block will automatically join on connect to your server/network.
+- auth::autojoin_opers - This option will specify what channels opers in a
+ matching auth {} block will automatically join on oper up (/oper).
+- channel::cycle_host_change - This option defines whether or not users
+ will cycle (part and rejoin) the channels they're in when their host changes.
+ This can be annoying to some people, but disabling it can cause client desyncs.
+- channel::host_in_topic - This option defines whether or not a host setter's
+ full host or just their nick will be shown on /TOPIC.
+- channel::use_local_channels - With this option, you can enable/disable
+ support for local channels on your server/network.
+- channel::exemptchanops - This option defines what channel modes channel
+ operators are exempt from, channel modes usable in this option are: cCDTNGK.
+- general::secret_channels_in_whois - This option defines whether or not opers
+ can see secret channels that a user is in when whoising them. Secret channels
+ will show up in the whois prefixed with *. If this option is disabled, opers
+ will still be able to see secret channels a user is in with the /SPYWHOIS
+ command.
+- Enabled a few popular extensions by default, added a few extensions to the
+ example config files that were missing, add a few more services aliases
+ by default, enable ip_cloaking by default and get rid of all the old
+ ip_cloaking modules.
+
+opers
+- Users' umodes are shown when you whois them.
+- swhois support - Adds a mostly free-form line of text to opers' whois
+ if one is set in their operator {} block.
+- custom operstring - Instead of showing the IRC operator or IRC administrator
+ oper strings, you can customize what it shows in each oper's operator {}
+ block.
+- host-on-oper - Give a vhost to operators upon oper up. Can be defined
+ generally, then the general option may be overridden by each operator {}
+ block.
+- operoverride - Oper override works very differently in ShadowIRCd compared
+ to all other IRCd's which support oper override. In ShadowIRCd, to be able
+ to override, you must have the oper:override privledge and you must then
+ set umode +p on yourself. The p umode will automatically expire and un-set
+ itself after a time set in the configuration option general::expire_override_time.
+- immune - Adds cmode +M. Opers can set this on a channel (even if they don't
+ have ops) without the channel's ops or other users seeing (only opers see
+ this mode at all.) It disallows anyone in the channel from kicking opers.
+- OACCEPT/callerid override - In ShadowIRCd 6, opers no longer can simply PM
+ users that have umodes +g or +G set and the oper is not on their accept list.
+ To allow opers to still be able to PM users in this situation, OACCEPT has been
+ added. OACCEPT is a new extension that enables the command /oaccept <user>
+ which adds a piece of metadata to that use which will allow you to PM them.
+
+other
+- Changed default NICKLEN to 31 (from 15) to fit more closely with other
+ IRCd's.
+- Rebrand many things from Charybdis to ShadowIRCd.
+- Move the m_force module to extensions.
+- Add a metadata framework. Currently used for swhois, custom operstring,
+ OACCEPT, cmode +J, cmode +K.
+
-- charybdis-3.2.0
server protocol
- SCAN UMODES: default list-max to 500, like a global WHO.
- Ignore directory names in MODRELOAD to avoid crashing if it is a core
module and the path is incorrect.
+- Tweaks to spambot checks.
config
- Add channel::only_ascii_channels config option to restrict channel names
to printable ascii only.
projects / irc / rqf / shadowircd.git / blobdiff