* that matches a user will be used. So place spoofs first, then specials,
* then general access, then restricted.
*
+ * privset {} blocks MUST be specified before anything that uses them. That
+ * means they must be defined before operator {}.
+ *
* Both shell style (#) and C style comments are supported.
*
* Files may be included by either:
* Server bans (+b $s:mask) -- extb_server.so
* SSL bans (+b $z) -- extb_ssl.so
* HURT system -- hurt.so
- * Host mangling (umode +h) -- ip_cloaking.so
+ * New host mangling (umode +x) -- ip_cloaking_4.0.so
+ * Old host mangling (umode +h) -- ip_cloaking.so
* Find channel forwards -- m_findforwards.so
* /identify support -- m_identify.so
* Opers cannot be invisible (umode +i) -- no_oper_invis.so
#loadmodule "extensions/extb_server.so";
#loadmodule "extensions/extb_ssl.so";
#loadmodule "extensions/hurt.so";
+#loadmodule "extensions/ip_cloaking_4.0.so";
#loadmodule "extensions/ip_cloaking.so";
#loadmodule "extensions/m_findforwards.so";
#loadmodule "extensions/m_identify.so";
/* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 1024 */
ssl_dh_params = "etc/dh.pem";
- /* ssld_count: number of ssld processes you want to start, if you have a really busy
- * server, using N-1 where N is the number of cpu/cpu cores you have might be useful
+ /* ssld_count: number of ssld processes you want to start, if you
+ * have a really busy server, using N-1 where N is the number of
+ * cpu/cpu cores you have might be useful. A number greater than one
+ * can also be useful in case of bugs in ssld and because ssld needs
+ * two file descriptors per SSL connection.
*/
ssld_count = 1;
*/
number_per_ip_global = 5;
- /* cidr_bitlen: Limits numbers of connections from a subnet size
+ /* cidr_ipv4_bitlen: Limits numbers of connections from a subnet size
+ */
+ cidr_ipv4_bitlen = 24;
+
+ /* cidr_ipv6_bitlen: Limits numbers of connections from a subnet size
* the following example makes the subnet /64 this is useful
* for IPv6 connections in particular
- * Also note that the way charybdis is written if you have
- * compiled support for IPv6, IPv4 cidr bitlens need to be modified
- * Basically to get the approriate length add 96 to the IPv4 length
- * For example for a /24 do 96+24 = 120
- *
*/
- cidr_bitlen = 64;
+ cidr_ipv6_bitlen = 64;
/* number_per_cidr: Number of connections to allow from a subnet of the
- * size given in cidr_bitlen. 4 seems to be a good default to me.
+ * size given in cidr_ipv4_bitlen/cidr_ipv6_bitlen.
+ * 4 seems to be a good default to me.
*/
number_per_cidr = 4;
*/
spoof = "I.still.hate.packets";
+ /* autojoin: Channel (or channels, comma-seperated) to join users
+ * in this auth block to on connect. Note that this won't join
+ * the user through any bans or otherwise restrictive chmodes.
+ */
+ autojoin = "#shadowircd,#test";
+
+ /* autojoin_opers : Channel (or channels, comma-seperated) to join
+ * opers to on oper-up.
+ */
+ autojoin_opers = "#opers,#help";
+
/* Possible flags in auth:
*
* encrypted | password is encrypted with mkpasswd
flags = need_ident;
};
-/* operator {}: defines ircd operators. (OLD O:)
- * charybdis no longer supports local operators, privileges are
- * controlled via flags.
- */
+/* privset{}: defines operator privilege sets. */
+privset "local_op" {
+ /* privs: controls the activities and commands an oper is
+ * allowed to do on the server
+ *
+ * Available options:
+ *
+ * oper:local_kill: allows local users to be /KILL'd
+ * oper:global_kill: allows local and remote users to be /KILL'd
+ * oper:routing: allows remote SQUIT and CONNECT
+ * oper:kline: allows KLINE and DLINE
+ * oper:unkline: allows UNKLINE and UNDLINE
+ * snomask:nick_changes: allows oper to see nickchanges via snomask +n
+ * oper:rehash: allows oper to REHASH config
+ * oper:die: allows DIE and RESTART
+ * oper:admin: gives admin privileges. admins
+ * may (un)load modules and see various
+ * additional information.
+ * oper:hidden_admin: gives admin privileges except
+ * will not have the admin lines in
+ * whois.
+ * oper:xline: allows use of /quote xline/unxline
+ * oper:resv: allows /quote resv/unresv and cmode +LP
+ * oper:operwall: allows the oper to send/receive operwalls
+ * oper:spy: allows 'operspy' features to see through +s
+ * channels etc. see /quote help operspy
+ * oper:hidden: hides the oper from /stats p
+ * oper:remoteban: allows remote kline etc
+ * oper:mass_notice: allows sending wallops and mass notices
+ */
+ privs = oper:local_kill, oper:operwall;
+};
+
+privset "server_bot" {
+ /* extends: a privset to inherit in this privset */
+ extends = "local_op";
+ privs = oper:kline, oper:remoteban, snomask:nick_changes;
+};
+
+privset "global_op" {
+ extends = "local_op";
+ privs = oper:global_kill, oper:routing, oper:kline, oper:unkline, oper:xline,
+ oper:resv, oper:mass_notice, oper:remoteban;
+};
+
+privset "admin" {
+ extends = "global_op";
+ privs = oper:admin, oper:die, oper:rehash, oper:spy;
+};
+
+/* operator {}: defines ircd operators. (OLD O:) */
operator "god" {
/* name: the name of the oper must go above */
*/
#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
+ /* fingerprint: if specified, the oper's client certificate
+ * fingerprint will be checked against the specified fingerprint
+ * below.
+ */
+ #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
+
/* umodes: the specific umodes this oper gets when they oper.
* If this is specified an oper will not be given oper_umodes
* These are described above oper_only_umodes in general {};
*/
snomask = "+Zbfkrsuy";
- /* privileges: controls the activities and commands an oper is
- * allowed to do on the server. You may prefix an option with ~ to
- * disable it, ie ~operwall
+ /* flags: misc options for the operator. You may prefix an option
+ * with ~ to disable it, e.g. ~encrypted.
*
- * Default flags are operwall, remoteban and encrypted.
+ * Default flags are encrypted.
*
* Available options:
*
* encrypted: the password above is encrypted [DEFAULT]
* need_ssl: must be using SSL/TLS to oper up
*/
- flags = global_kill, remote, kline, unkline,
- die, rehash, admin, xline, operwall;
+ flags = encrypted;
+
+ /* privset: privileges set to grant */
+ privset = "admin";
};
/* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
* ratbox-services does.
*/
kick_on_split_riding = no;
+
+ /* only ascii channels: disable local users joining channels
+ * containing characters outside the range 33-126 (non-printable
+ * or non-ASCII).
+ */
+ only_ascii_channels = no;
+
+ /* resv_forcepart: force any local users to part a channel
+ * when a RESV is issued.
+ */
+ resv_forcepart = yes;
};
/* These are the blacklist settings.
* You can have multiple combinations of host and rejection reasons.
- * They are used in pairs of one host/rejection reason, or multiple hosts/rejection reason.
+ * They are used in pairs of one host/rejection reason.
*
* These settings should be adequate for most networks, and are (presently)
* required for use on AthemeNet.
/* default umodes: umodes to set upon connection
* If you have enabled the ip_cloaking extension, and you wish for
- * incoming clients to be set +h upon connection, add +h to the umode
+ * incoming clients to be set +h or +x upon connection, add +h or +x to the umode
* string below.
*/
default_umodes = "+i";
projects / irc / rqf / shadowircd.git / blobdiff