/* doc/example.conf - brief example configuration file * * Copyright (C) 2000-2002 Hybrid Development Team * Copyright (C) 2002-2005 ircd-ratbox development team * Copyright (C) 2005-2006 charybdis development team * * $Id: example.conf 3582 2007-11-17 21:55:48Z jilles $ * * See reference.conf for more information. */ /* Extensions */ #loadmodule "extensions/createauthonly.so"; #loadmodule "extensions/extb_account.so"; #loadmodule "extensions/extb_canjoin.so"; #loadmodule "extensions/extb_channel.so"; #loadmodule "extensions/extb_extgecos.so"; #loadmodule "extensions/extb_oper.so"; #loadmodule "extensions/extb_realname.so"; #loadmodule "extensions/extb_server.so"; #loadmodule "extensions/hurt.so"; #loadmodule "extensions/ip_cloaking.so"; #loadmodule "extensions/m_findforwards.so"; #loadmodule "extensions/m_identify.so"; #loadmodule "extensions/no_oper_invis.so"; #loadmodule "extensions/sno_farconnect.so"; #loadmodule "extensions/sno_globalkline.so"; #loadmodule "extensions/sno_globaloper.so"; #loadmodule "extensions/sno_whois.so"; serverinfo { name = "hades.arpa"; sid = "42X"; description = "charybdis test server"; network_name = "AthemeNET"; network_desc = "Your IRC network."; hub = yes; /* On multi-homed hosts you may need the following. These define * the addresses we connect from to other servers. */ /* for IPv4 */ #vhost = "192.169.0.1"; /* for IPv6 */ #vhost6 = "3ffe:80e8:546::2"; /* max_clients: This should be set to the maximum amount of clients * that the server should support. Note that you should leave some * file descriptors free for log files, server connections, ident * lookups (if enabled), exceed_limit clients, etc. */ max_clients = 1024; }; admin { name = "Lazy admin (lazya)"; description = "AthemeNET client server"; email = "nobody@127.0.0.1"; }; log { fname_userlog = "logs/userlog"; #fname_fuserlog = "logs/fuserlog"; fname_operlog = "logs/operlog"; #fname_foperlog = "logs/foperlog"; fname_serverlog = "logs/serverlog"; fname_glinelog = "logs/glinelog"; #fname_klinelog = "logs/klinelog"; fname_killlog = "logs/killlog"; fname_operspylog = "logs/operspylog"; #fname_ioerrorlog = "logs/ioerror"; }; /* class {} blocks MUST be specified before anything that uses them. That * means they must be defined before auth {} and before connect {}. */ class "users" { ping_time = 2 minutes; number_per_ident = 10; number_per_ip = 10; number_per_ip_global = 50; cidr_bitlen = 64; number_per_cidr = 8; max_number = 3000; sendq = 400 kbytes; }; class "opers" { ping_time = 5 minutes; number_per_ip = 10; max_number = 1000; sendq = 1 megabyte; }; class "server" { ping_time = 5 minutes; connectfreq = 5 minutes; max_number = 1; sendq = 4 megabytes; }; listen { /* If you want to listen on a specific IP only, specify host. * host definitions apply only to the following port line. */ #host = "192.169.0.1"; port = 5000, 6665 .. 6669; /* Listen on IPv6 (if you used host= above). */ #host = "3ffe:1234:a:b:c::d"; #port = 5000, 6665 .. 6669; }; /* auth {}: allow users to connect to the ircd (OLD I:) * auth {} blocks MUST be specified in order of precedence. The first one * that matches a user will be used. So place spoofs first, then specials, * then general access, then restricted. */ auth { /* user: the user@host allowed to connect. Multiple IPv4/IPv6 user * lines are permitted per auth block. This is matched against the * hostname and IP address (using :: shortening for IPv6 and * prepending a 0 if it starts with a colon) and can also use CIDR * masks. */ user = "*@172.16.0.0/12"; user = "*test@123D:B567:*"; /* password: an optional password that is required to use this block. * By default this is not encrypted, specify the flag "encrypted" in * flags = ...; below if it is. */ password = "letmein"; /* spoof: fake the users user@host to be be this. You may either * specify a host or a user@host to spoof to. This is free-form, * just do everyone a favour and dont abuse it. (OLD I: = flag) */ spoof = "I.still.hate.packets"; /* Possible flags in auth: * * encrypted | password is encrypted with mkpasswd * spoof_notice | give a notice when spoofing hosts * exceed_limit (old > flag) | allow user to exceed class user limits * kline_exempt (old ^ flag) | exempt this user from k/g/xlines&dnsbls * dnsbl_exempt | exempt this user from dnsbls * gline_exempt (old _ flag) | exempt this user from glines * spambot_exempt | exempt this user from spambot checks * shide_exempt | exempt this user from serverhiding * jupe_exempt | exempt this user from generating * warnings joining juped channels * resv_exempt | exempt this user from resvs * flood_exempt | exempt this user from flood limits * USE WITH CAUTION. * no_tilde (old - flag) | don't prefix ~ to username if no ident * need_ident (old + flag) | require ident for user in this class * need_sasl | require SASL id for user in this class */ flags = kline_exempt, exceed_limit; /* class: the class the user is placed in */ class = "opers"; }; auth { user = "*@*"; class = "users"; }; operator "god" { /* name: the name of the oper must go above */ /* user: the user@host required for this operator. CIDR *is* * supported now. auth{} spoofs work here, other spoofs do not. * multiple user="" lines are supported. */ user = "*god@127.0.0.1"; /* password: the password required to oper. Unless ~encrypted is * contained in flags = ...; this will need to be encrypted using * mkpasswd, MD5 is supported */ password = "etcnjl8juSU1E"; /* rsa key: the public key for this oper when using Challenge. * A password should not be defined when this is used, see * doc/challenge.txt for more information. */ #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub"; /* umodes: the specific umodes this oper gets when they oper. * If this is specified an oper will not be given oper_umodes * These are described above oper_only_umodes in general {}; */ #umodes = locops, servnotice, operwall, wallop; /* snomask: specific server notice mask on oper up. * If this is specified an oper will not be given oper_snomask. */ snomask = "+Zbfkrsuy"; /* privileges: controls the activities and commands an oper is * allowed to do on the server. You may prefix an option with ~ to * disable it, ie ~operwall * * Default flags are operwall, remoteban and encrypted. * * Available options: * * encrypted: the password above is encrypted [DEFAULT] * local_kill: allows local users to be /KILL'd * global_kill: allows local and remote users to be * /KILL'd (OLD 'O' flag) * remote: allows remote SQUIT and CONNECT (OLD 'R' flag) * kline: allows KLINE and DLINE (OLD 'K' flag) * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag) * gline: allows GLINE (OLD 'G' flag) * nick_changes: allows oper to see nickchanges (OLD 'N' flag) * via snomask +n * rehash: allows oper to REHASH config (OLD 'H' flag) * die: allows DIE and RESTART (OLD 'D' flag) * admin: gives admin privileges. admins * may (un)load modules and see the * real IPs of servers. * hidden_admin: gives admin privileges except * will not have the admin lines in * stats p and whois. * xline: allows use of /quote xline/unxline * resv: allows use of /quote resv/unresv [DEFAULT] * operwall: allows the oper to send/receive operwalls [DEFAULT] * oper_spy: allows 'operspy' features to see through +s * channels etc. see /quote help operspy * hidden_oper: hides the oper from /stats p (OLD UMODE +p) * remoteban: allows remote kline etc [DEFAULT] */ flags = global_kill, remote, kline, unkline, gline, die, rehash, admin, xline, operwall; }; connect "irc.uplink.com" { host = "192.168.0.1"; send_password = "password"; accept_password = "anotherpassword"; port = 6666; hub_mask = "*"; class = "server"; flags = compressed, topicburst; /* If the connection is IPv6, uncomment below. * Use 0::1, not ::1, for IPv6 localhost. */ #aftype = ipv6; }; service { name = "services.int"; }; cluster { name = "*"; flags = kline, tkline, unkline, xline, txline, unxline, resv, tresv, unresv; }; shared { oper = "*@*", "*"; flags = all, rehash; }; /* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */ exempt { ip = "127.0.0.1"; }; channel { use_invex = yes; use_except = yes; use_knock = yes; use_forward = yes; knock_delay = 5 minutes; knock_delay_channel = 1 minute; max_chans_per_user = 15; max_bans = 100; max_bans_large = 500; default_split_user_count = 0; default_split_server_count = 0; no_create_on_split = no; no_join_on_split = no; burst_topicwho = yes; kick_on_split_riding = no; }; serverhide { flatten_links = yes; links_delay = 5 minutes; hidden = no; disable_hidden = no; }; /* These are the blacklist settings. * You can have multiple combinations of host and rejection reasons. * They are used in pairs of one host/rejection reason, or multiple hosts/rejection reason. * * These settings should be adequate for most networks, and are (presently) * required for use on AthemeNet. * * Word to the wise: Do not use blacklists like SPEWS for blocking IRC * connections. * * As of charybdis 2.1.3, you can do some keyword substitution on the rejection * reason. The available keyword substitutions are: * * ${ip} - the user's IP * ${host} - the user's canonical hostname * ${dnsbl-host} - the dnsbl hostname the lookup was done against * ${nick} - the user's nickname * ${network-name} - the name of the network * * Note: AHBL (the providers of the below *.ahbl.org BLs) request that they be * contacted, via email, at admins@2mbit.com before using these BLs. * See for more information. */ blacklist { host = "dnsbl.dronebl.org"; reject_reason = "${nick}, your IP (${ip}) is listed in DroneBL. For assistance, see http://dronebl.org/lookup_branded.do?ip=${ip}&network=${network-name}"; # host = "ircbl.ahbl.org"; # reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for having an open proxy. In order to protect ${network-name} from abuse, we are not allowing connections with open proxies to connect."; # # host = "tor.ahbl.org"; # reject_reason = "${nick}, your IP (${ip}) is listed as a TOR exit node. In order to protect ${network-name} from tor-based abuse, we are not allowing TOR exit nodes to connect to our network."; }; alias "NickServ" { target = "NickServ"; }; alias "ChanServ" { target = "ChanServ"; }; alias "OperServ" { target = "OperServ"; }; alias "MemoServ" { target = "MemoServ"; }; alias "NS" { target = "NickServ"; }; alias "CS" { target = "ChanServ"; }; alias "OS" { target = "OperServ"; }; alias "MS" { target = "MemoServ"; }; general { hide_error_messages = opers; hide_spoof_ips = yes; /* * default_umodes: umodes to enable on connect. * If you have enabled the ip_cloaking module, and you want * to make use of it, add +h to this option, i.e.: * default_umodes = "+ih"; */ default_umodes = "+i"; default_operstring = "is an IRC Operator"; default_adminstring = "is a Server Administrator"; servicestring = "is a Network Service"; disable_fake_channels = no; tkline_expire_notices = no; default_floodcount = 10; failed_oper_notice = yes; dots_in_ident=2; dot_in_ip6_addr = no; min_nonwildcard = 4; min_nonwildcard_simple = 3; max_accept = 100; max_monitor = 100; anti_nick_flood = yes; max_nick_time = 20 seconds; max_nick_changes = 5; anti_spam_exit_message_time = 5 minutes; ts_warn_delta = 30 seconds; ts_max_delta = 5 minutes; client_exit = yes; collision_fnc = yes; global_snotices = yes; dline_with_reason = yes; kline_delay = 0 seconds; kline_with_reason = yes; kline_reason = "K-Lined"; identify_service = "NickServ@services.int"; identify_command = "IDENTIFY"; non_redundant_klines = yes; warn_no_nline = yes; stats_e_disabled = no; stats_c_oper_only=no; stats_h_oper_only=no; stats_y_oper_only=no; stats_o_oper_only=yes; stats_P_oper_only=no; stats_i_oper_only=masked; stats_k_oper_only=masked; map_oper_only = no; operspy_admin_only = no; operspy_dont_care_user_info = no; caller_id_wait = 1 minute; pace_wait_simple = 1 second; pace_wait = 10 seconds; short_motd = no; ping_cookie = no; connect_timeout = 30 seconds; disable_auth = no; no_oper_flood = yes; glines = no; gline_time = 1 day; gline_min_cidr = 16; idletime = 0; max_targets = 4; client_flood = 20; use_whois_actually = no; oper_only_umodes = operwall, locops, servnotice; oper_umodes = locops, servnotice, operwall, wallop; oper_snomask = "+s"; burst_away = yes; nick_delay = 0 seconds; # 15 minutes if you want to enable this reject_ban_time = 1 minute; reject_after_count = 3; reject_duration = 5 minutes; max_unknown_ip = 2; }; modules { path = "modules"; path = "modules/autoload"; };