/*
-** 2001 September 15
+** 2001-09-15
**
** The author disclaims copyright to this source code. In place of
** a legal notice, here is a blessing:
** Some of the definitions that are in this file are marked as
** "experimental". Experimental interfaces are normally new
** features recently added to SQLite. We do not anticipate changes
-** to experimental interfaces but reserve to make minor changes if
-** experience from use "in the wild" suggest such changes are prudent.
+** to experimental interfaces but reserve the right to make minor changes
+** if experience from use "in the wild" suggest such changes are prudent.
**
** The official C-language API documentation for SQLite is derived
** from comments in this file. This file is the authoritative source
-** on how SQLite interfaces are suppose to operate.
+** on how SQLite interfaces are supposed to operate.
**
** The name of this file under configuration management is "sqlite.h.in".
** The makefile makes some minor changes to this file (such as inserting
** the version number) and changes its name to "sqlite3.h" as
** part of the build process.
-**
-** @(#) $Id: sqlite.h.in,v 1.394 2008/08/25 21:23:02 drh Exp $
*/
-#ifndef _SQLITE3_H_
-#define _SQLITE3_H_
+#ifndef SQLITE3_H
+#define SQLITE3_H
#include <stdarg.h> /* Needed for the definition of va_list */
/*
/*
-** Add the ability to override 'extern'
+** Provide the ability to override linkage features of the interface.
*/
#ifndef SQLITE_EXTERN
# define SQLITE_EXTERN extern
#endif
-
-/*
-** Add the ability to mark interfaces as deprecated.
-*/
-#if (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1))
- /* GCC added the deprecated attribute in version 3.1 */
- #define SQLITE_DEPRECATED __attribute__ ((deprecated))
-#elif defined(_MSC_VER)
- #define SQLITE_DEPRECATED __declspec(deprecated)
-#else
- #define SQLITE_DEPRECATED
+#ifndef SQLITE_API
+# define SQLITE_API
+#endif
+#ifndef SQLITE_CDECL
+# define SQLITE_CDECL
+#endif
+#ifndef SQLITE_APICALL
+# define SQLITE_APICALL
+#endif
+#ifndef SQLITE_STDCALL
+# define SQLITE_STDCALL SQLITE_APICALL
+#endif
+#ifndef SQLITE_CALLBACK
+# define SQLITE_CALLBACK
+#endif
+#ifndef SQLITE_SYSAPI
+# define SQLITE_SYSAPI
#endif
/*
-** Add the ability to mark interfaces as experimental.
+** These no-op macros are used in front of interfaces to mark those
+** interfaces as either deprecated or experimental. New applications
+** should not use deprecated interfaces - they are supported for backwards
+** compatibility only. Application writers should be aware that
+** experimental interfaces are subject to change in point releases.
+**
+** These macros used to resolve to various kinds of compiler magic that
+** would generate warning messages when they were used. But that
+** compiler magic ended up generating such a flurry of bug reports
+** that we have taken it all out and gone back to using simple
+** noop macros.
*/
-#if (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))
- /* I can confirm that it does not work on version 4.1.0... */
- /* First appears in GCC docs for version 4.3.0 */
- #define SQLITE_EXPERIMENTAL __attribute__ ((warning ("is experimental")))
-#elif defined(_MSC_VER)
- #define SQLITE_EXPERIMENTAL __declspec(deprecated("was declared experimental"))
-#else
- #define SQLITE_EXPERIMENTAL
-#endif
+#define SQLITE_DEPRECATED
+#define SQLITE_EXPERIMENTAL
/*
** Ensure these symbols were not defined by some previous header file.
#endif
/*
-** CAPI3REF: Compile-Time Library Version Numbers {H10010} <S60100>
-**
-** The SQLITE_VERSION and SQLITE_VERSION_NUMBER #defines in
-** the sqlite3.h file specify the version of SQLite with which
-** that header file is associated.
-**
-** The "version" of SQLite is a string of the form "X.Y.Z".
-** The phrase "alpha" or "beta" might be appended after the Z.
-** The X value is major version number always 3 in SQLite3.
-** The X value only changes when backwards compatibility is
-** broken and we intend to never break backwards compatibility.
-** The Y value is the minor version number and only changes when
-** there are major feature enhancements that are forwards compatible
-** but not backwards compatible.
-** The Z value is the release number and is incremented with
-** each release but resets back to 0 whenever Y is incremented.
-**
-** See also: [sqlite3_libversion()] and [sqlite3_libversion_number()].
+** CAPI3REF: Compile-Time Library Version Numbers
+**
+** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header
+** evaluates to a string literal that is the SQLite version in the
+** format "X.Y.Z" where X is the major version number (always 3 for
+** SQLite3) and Y is the minor version number and Z is the release number.)^
+** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer
+** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same
+** numbers used in [SQLITE_VERSION].)^
+** The SQLITE_VERSION_NUMBER for any given release of SQLite will also
+** be larger than the release from which it is derived. Either Y will
+** be held constant and Z will be incremented or else Y will be incremented
+** and Z will be reset to zero.
+**
+** Since [version 3.6.18] ([dateof:3.6.18]),
+** SQLite source code has been stored in the
+** <a href="http://www.fossil-scm.org/">Fossil configuration management
+** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to
+** a string which identifies a particular check-in of SQLite
+** within its configuration management system. ^The SQLITE_SOURCE_ID
+** string contains the date and time of the check-in (UTC) and a SHA1
+** or SHA3-256 hash of the entire source tree. If the source code has
+** been edited in any way since it was last checked in, then the last
+** four hexadecimal digits of the hash may be modified.
+**
+** See also: [sqlite3_libversion()],
+** [sqlite3_libversion_number()], [sqlite3_sourceid()],
+** [sqlite_version()] and [sqlite_source_id()].
+*/
+#define SQLITE_VERSION "3.21.0"
+#define SQLITE_VERSION_NUMBER 3021000
+#define SQLITE_SOURCE_ID "2017-10-24 18:55:49 1a584e499906b5c87ec7d43d4abce641fdf017c42125b083109bc77c4de48827"
+
+/*
+** CAPI3REF: Run-Time Library Version Numbers
+** KEYWORDS: sqlite3_version sqlite3_sourceid
+**
+** These interfaces provide the same information as the [SQLITE_VERSION],
+** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
+** but are associated with the library instead of the header file. ^(Cautious
+** programmers might include assert() statements in their application to
+** verify that values returned by these interfaces match the macros in
+** the header, and thus ensure that the application is
+** compiled with matching library and header files.
**
-** INVARIANTS:
-**
-** {H10011} The SQLITE_VERSION #define in the sqlite3.h header file shall
-** evaluate to a string literal that is the SQLite version
-** with which the header file is associated.
-**
-** {H10014} The SQLITE_VERSION_NUMBER #define shall resolve to an integer
-** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z
-** are the major version, minor version, and release number.
-*/
-#define SQLITE_VERSION "3.6.2"
-#define SQLITE_VERSION_NUMBER 3006002
+** <blockquote><pre>
+** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
+** assert( strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,80)==0 );
+** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
+** </pre></blockquote>)^
+**
+** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION]
+** macro. ^The sqlite3_libversion() function returns a pointer to the
+** to the sqlite3_version[] string constant. The sqlite3_libversion()
+** function is provided for use in DLLs since DLL users usually do not have
+** direct access to string constants within the DLL. ^The
+** sqlite3_libversion_number() function returns an integer equal to
+** [SQLITE_VERSION_NUMBER]. ^(The sqlite3_sourceid() function returns
+** a pointer to a string constant whose value is the same as the
+** [SQLITE_SOURCE_ID] C preprocessor macro. Except if SQLite is built
+** using an edited copy of [the amalgamation], then the last four characters
+** of the hash might be different from [SQLITE_SOURCE_ID].)^
+**
+** See also: [sqlite_version()] and [sqlite_source_id()].
+*/
+SQLITE_API SQLITE_EXTERN const char sqlite3_version[];
+SQLITE_API const char *sqlite3_libversion(void);
+SQLITE_API const char *sqlite3_sourceid(void);
+SQLITE_API int sqlite3_libversion_number(void);
+
+/*
+** CAPI3REF: Run-Time Library Compilation Options Diagnostics
+**
+** ^The sqlite3_compileoption_used() function returns 0 or 1
+** indicating whether the specified option was defined at
+** compile time. ^The SQLITE_ prefix may be omitted from the
+** option name passed to sqlite3_compileoption_used().
+**
+** ^The sqlite3_compileoption_get() function allows iterating
+** over the list of options that were defined at compile time by
+** returning the N-th compile time option string. ^If N is out of range,
+** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_
+** prefix is omitted from any strings returned by
+** sqlite3_compileoption_get().
+**
+** ^Support for the diagnostic functions sqlite3_compileoption_used()
+** and sqlite3_compileoption_get() may be omitted by specifying the
+** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time.
+**
+** See also: SQL functions [sqlite_compileoption_used()] and
+** [sqlite_compileoption_get()] and the [compile_options pragma].
+*/
+#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
+SQLITE_API const char *sqlite3_compileoption_get(int N);
+#endif
/*
-** CAPI3REF: Run-Time Library Version Numbers {H10020} <S60100>
-** KEYWORDS: sqlite3_version
-**
-** These features provide the same information as the [SQLITE_VERSION]
-** and [SQLITE_VERSION_NUMBER] #defines in the header, but are associated
-** with the library instead of the header file. Cautious programmers might
-** include a check in their application to verify that
-** sqlite3_libversion_number() always returns the value
-** [SQLITE_VERSION_NUMBER].
-**
-** The sqlite3_libversion() function returns the same information as is
-** in the sqlite3_version[] string constant. The function is provided
-** for use in DLLs since DLL users usually do not have direct access to string
-** constants within the DLL.
-**
-** INVARIANTS:
+** CAPI3REF: Test To See If The Library Is Threadsafe
**
-** {H10021} The [sqlite3_libversion_number()] interface shall return
-** an integer equal to [SQLITE_VERSION_NUMBER].
-**
-** {H10022} The [sqlite3_version] string constant shall contain
-** the text of the [SQLITE_VERSION] string.
-**
-** {H10023} The [sqlite3_libversion()] function shall return
-** a pointer to the [sqlite3_version] string constant.
-*/
-SQLITE_EXTERN const char sqlite3_version[];
-const char *sqlite3_libversion(void);
-int sqlite3_libversion_number(void);
-
-/*
-** CAPI3REF: Test To See If The Library Is Threadsafe {H10100} <S60100>
+** ^The sqlite3_threadsafe() function returns zero if and only if
+** SQLite was compiled with mutexing code omitted due to the
+** [SQLITE_THREADSAFE] compile-time option being set to 0.
**
** SQLite can be compiled with or without mutexes. When
-** the [SQLITE_THREADSAFE] C preprocessor macro is true, mutexes
-** are enabled and SQLite is threadsafe. When that macro is false,
+** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
+** are enabled and SQLite is threadsafe. When the
+** [SQLITE_THREADSAFE] macro is 0,
** the mutexes are omitted. Without the mutexes, it is not safe
** to use SQLite concurrently from more than one thread.
**
** Enabling mutexes incurs a measurable performance penalty.
** So if speed is of utmost importance, it makes sense to disable
** the mutexes. But for maximum safety, mutexes should be enabled.
-** The default behavior is for mutexes to be enabled.
+** ^The default behavior is for mutexes to be enabled.
**
-** This interface can be used by a program to make sure that the
+** This interface can be used by an application to make sure that the
** version of SQLite that it is linking against was compiled with
** the desired setting of the [SQLITE_THREADSAFE] macro.
**
** This interface only reports on the compile-time mutex setting
** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with
-** SQLITE_THREADSAFE=1 then mutexes are enabled by default but
+** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but
** can be fully or partially disabled using a call to [sqlite3_config()]
** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
-** or [SQLITE_CONFIG_MUTEX]. The return value of this function shows
-** only the default compile-time setting, not any run-time changes
-** to that setting.
-**
-** INVARIANTS:
+** or [SQLITE_CONFIG_SERIALIZED]. ^(The return value of the
+** sqlite3_threadsafe() function shows only the compile-time setting of
+** thread safety, not any run-time changes to that setting made by
+** sqlite3_config(). In other words, the return value from sqlite3_threadsafe()
+** is unchanged by calls to sqlite3_config().)^
**
-** {H10101} The [sqlite3_threadsafe()] function shall return nonzero if
-** SQLite was compiled with the its mutexes enabled by default
-** or zero if SQLite was compiled such that mutexes are
-** permanently disabled.
-**
-** {H10102} The value returned by the [sqlite3_threadsafe()] function
-** shall not change when mutex setting are modified at
-** runtime using the [sqlite3_config()] interface and
-** especially the [SQLITE_CONFIG_SINGLETHREAD],
-** [SQLITE_CONFIG_MULTITHREAD], [SQLITE_CONFIG_SERIALIZED],
-** and [SQLITE_CONFIG_MUTEX] verbs.
+** See the [threading mode] documentation for additional information.
*/
-int sqlite3_threadsafe(void);
+SQLITE_API int sqlite3_threadsafe(void);
/*
-** CAPI3REF: Database Connection Handle {H12000} <S40200>
+** CAPI3REF: Database Connection Handle
** KEYWORDS: {database connection} {database connections}
**
** Each open SQLite database is represented by a pointer to an instance of
** the opaque structure named "sqlite3". It is useful to think of an sqlite3
** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and
** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()]
-** is its destructor. There are many other interfaces (such as
+** and [sqlite3_close_v2()] are its destructors. There are many other
+** interfaces (such as
** [sqlite3_prepare_v2()], [sqlite3_create_function()], and
** [sqlite3_busy_timeout()] to name but three) that are methods on an
** sqlite3 object.
typedef struct sqlite3 sqlite3;
/*
-** CAPI3REF: 64-Bit Integer Types {H10200} <S10110>
+** CAPI3REF: 64-Bit Integer Types
** KEYWORDS: sqlite_int64 sqlite_uint64
**
** Because there is no cross-platform way to specify 64-bit integer types
** The sqlite_int64 and sqlite_uint64 types are supported for backwards
** compatibility only.
**
-** INVARIANTS:
-**
-** {H10201} The [sqlite_int64] and [sqlite3_int64] type shall specify
-** a 64-bit signed integer.
-**
-** {H10202} The [sqlite_uint64] and [sqlite3_uint64] type shall specify
-** a 64-bit unsigned integer.
+** ^The sqlite3_int64 and sqlite_int64 types can store integer values
+** between -9223372036854775808 and +9223372036854775807 inclusive. ^The
+** sqlite3_uint64 and sqlite_uint64 types can store integer values
+** between 0 and +18446744073709551615 inclusive.
*/
#ifdef SQLITE_INT64_TYPE
typedef SQLITE_INT64_TYPE sqlite_int64;
- typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+# ifdef SQLITE_UINT64_TYPE
+ typedef SQLITE_UINT64_TYPE sqlite_uint64;
+# else
+ typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+# endif
#elif defined(_MSC_VER) || defined(__BORLANDC__)
typedef __int64 sqlite_int64;
typedef unsigned __int64 sqlite_uint64;
#endif
/*
-** CAPI3REF: Closing A Database Connection {H12010} <S30100><S40200>
-**
-** This routine is the destructor for the [sqlite3] object.
-**
-** Applications should [sqlite3_finalize | finalize] all [prepared statements]
-** and [sqlite3_blob_close | close] all [BLOB handles] associated with
-** the [sqlite3] object prior to attempting to close the object.
-** The [sqlite3_next_stmt()] interface can be used to locate all
-** [prepared statements] associated with a [database connection] if desired.
-** Typical code might look like this:
-**
-** <blockquote><pre>
-** sqlite3_stmt *pStmt;
-** while( (pStmt = sqlite3_next_stmt(db, 0))!=0 ){
-** sqlite3_finalize(pStmt);
-** }
-** </pre></blockquote>
-**
-** If [sqlite3_close()] is invoked while a transaction is open,
+** CAPI3REF: Closing A Database Connection
+** DESTRUCTOR: sqlite3
+**
+** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors
+** for the [sqlite3] object.
+** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if
+** the [sqlite3] object is successfully destroyed and all associated
+** resources are deallocated.
+**
+** ^If the database connection is associated with unfinalized prepared
+** statements or unfinished sqlite3_backup objects then sqlite3_close()
+** will leave the database connection open and return [SQLITE_BUSY].
+** ^If sqlite3_close_v2() is called with unfinalized prepared statements
+** and/or unfinished sqlite3_backups, then the database connection becomes
+** an unusable "zombie" which will automatically be deallocated when the
+** last prepared statement is finalized or the last sqlite3_backup is
+** finished. The sqlite3_close_v2() interface is intended for use with
+** host languages that are garbage collected, and where the order in which
+** destructors are called is arbitrary.
+**
+** Applications should [sqlite3_finalize | finalize] all [prepared statements],
+** [sqlite3_blob_close | close] all [BLOB handles], and
+** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated
+** with the [sqlite3] object prior to attempting to close the object. ^If
+** sqlite3_close_v2() is called on a [database connection] that still has
+** outstanding [prepared statements], [BLOB handles], and/or
+** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation
+** of resources is deferred until all [prepared statements], [BLOB handles],
+** and [sqlite3_backup] objects are also destroyed.
+**
+** ^If an [sqlite3] object is destroyed while a transaction is open,
** the transaction is automatically rolled back.
**
-** INVARIANTS:
-**
-** {H12011} A successful call to [sqlite3_close(C)] shall destroy the
-** [database connection] object C.
-**
-** {H12012} A successful call to [sqlite3_close(C)] shall return SQLITE_OK.
-**
-** {H12013} A successful call to [sqlite3_close(C)] shall release all
-** memory and system resources associated with [database connection]
-** C.
-**
-** {H12014} A call to [sqlite3_close(C)] on a [database connection] C that
-** has one or more open [prepared statements] shall fail with
-** an [SQLITE_BUSY] error code.
-**
-** {H12015} A call to [sqlite3_close(C)] where C is a NULL pointer shall
-** return SQLITE_OK.
-**
-** {H12019} When [sqlite3_close(C)] is invoked on a [database connection] C
-** that has a pending transaction, the transaction shall be
-** rolled back.
-**
-** ASSUMPTIONS:
-**
-** {A12016} The C parameter to [sqlite3_close(C)] must be either a NULL
-** pointer or an [sqlite3] object pointer obtained
-** from [sqlite3_open()], [sqlite3_open16()], or
-** [sqlite3_open_v2()], and not previously closed.
+** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)]
+** must be either a NULL
+** pointer or an [sqlite3] object pointer obtained
+** from [sqlite3_open()], [sqlite3_open16()], or
+** [sqlite3_open_v2()], and not previously closed.
+** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
+** argument is a harmless no-op.
*/
-int sqlite3_close(sqlite3 *);
+SQLITE_API int sqlite3_close(sqlite3*);
+SQLITE_API int sqlite3_close_v2(sqlite3*);
/*
** The type for a callback function.
typedef int (*sqlite3_callback)(void*,int,char**, char**);
/*
-** CAPI3REF: One-Step Query Execution Interface {H12100} <S10000>
-**
-** The sqlite3_exec() interface is a convenient way of running one or more
-** SQL statements without having to write a lot of C code. The UTF-8 encoded
-** SQL statements are passed in as the second parameter to sqlite3_exec().
-** The statements are evaluated one by one until either an error or
-** an interrupt is encountered, or until they are all done. The 3rd parameter
-** is an optional callback that is invoked once for each row of any query
-** results produced by the SQL statements. The 5th parameter tells where
-** to write any error messages.
-**
-** The error message passed back through the 5th parameter is held
-** in memory obtained from [sqlite3_malloc()]. To avoid a memory leak,
-** the calling application should call [sqlite3_free()] on any error
-** message returned through the 5th parameter when it has finished using
-** the error message.
-**
-** If the SQL statement in the 2nd parameter is NULL or an empty string
-** or a string containing only whitespace and comments, then no SQL
-** statements are evaluated and the database is not changed.
-**
-** The sqlite3_exec() interface is implemented in terms of
-** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
-** The sqlite3_exec() routine does nothing to the database that cannot be done
-** by [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
-**
-** INVARIANTS:
-**
-** {H12101} A successful invocation of [sqlite3_exec(D,S,C,A,E)]
-** shall sequentially evaluate all of the UTF-8 encoded,
-** semicolon-separated SQL statements in the zero-terminated
-** string S within the context of the [database connection] D.
-**
-** {H12102} If the S parameter to [sqlite3_exec(D,S,C,A,E)] is NULL then
-** the actions of the interface shall be the same as if the
-** S parameter were an empty string.
-**
-** {H12104} The return value of [sqlite3_exec()] shall be [SQLITE_OK] if all
-** SQL statements run successfully and to completion.
-**
-** {H12105} The return value of [sqlite3_exec()] shall be an appropriate
-** non-zero [error code] if any SQL statement fails.
-**
-** {H12107} If one or more of the SQL statements handed to [sqlite3_exec()]
-** return results and the 3rd parameter is not NULL, then
-** the callback function specified by the 3rd parameter shall be
-** invoked once for each row of result.
-**
-** {H12110} If the callback returns a non-zero value then [sqlite3_exec()]
-** shall abort the SQL statement it is currently evaluating,
-** skip all subsequent SQL statements, and return [SQLITE_ABORT].
-**
-** {H12113} The [sqlite3_exec()] routine shall pass its 4th parameter through
-** as the 1st parameter of the callback.
-**
-** {H12116} The [sqlite3_exec()] routine shall set the 2nd parameter of its
-** callback to be the number of columns in the current row of
-** result.
-**
-** {H12119} The [sqlite3_exec()] routine shall set the 3rd parameter of its
-** callback to be an array of pointers to strings holding the
-** values for each column in the current result set row as
-** obtained from [sqlite3_column_text()].
-**
-** {H12122} The [sqlite3_exec()] routine shall set the 4th parameter of its
-** callback to be an array of pointers to strings holding the
-** names of result columns as obtained from [sqlite3_column_name()].
-**
-** {H12125} If the 3rd parameter to [sqlite3_exec()] is NULL then
-** [sqlite3_exec()] shall silently discard query results.
-**
-** {H12131} If an error occurs while parsing or evaluating any of the SQL
-** statements in the S parameter of [sqlite3_exec(D,S,C,A,E)] and if
-** the E parameter is not NULL, then [sqlite3_exec()] shall store
-** in *E an appropriate error message written into memory obtained
-** from [sqlite3_malloc()].
+** CAPI3REF: One-Step Query Execution Interface
+** METHOD: sqlite3
+**
+** The sqlite3_exec() interface is a convenience wrapper around
+** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],
+** that allows an application to run multiple statements of SQL
+** without having to use a lot of C code.
+**
+** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
+** semicolon-separate SQL statements passed into its 2nd argument,
+** in the context of the [database connection] passed in as its 1st
+** argument. ^If the callback function of the 3rd argument to
+** sqlite3_exec() is not NULL, then it is invoked for each result row
+** coming out of the evaluated SQL statements. ^The 4th argument to
+** sqlite3_exec() is relayed through to the 1st argument of each
+** callback invocation. ^If the callback pointer to sqlite3_exec()
+** is NULL, then no callback is ever invoked and result rows are
+** ignored.
+**
+** ^If an error occurs while evaluating the SQL statements passed into
+** sqlite3_exec(), then execution of the current statement stops and
+** subsequent statements are skipped. ^If the 5th parameter to sqlite3_exec()
+** is not NULL then any error message is written into memory obtained
+** from [sqlite3_malloc()] and passed back through the 5th parameter.
+** To avoid memory leaks, the application should invoke [sqlite3_free()]
+** on error message strings returned through the 5th parameter of
+** sqlite3_exec() after the error message string is no longer needed.
+** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
+** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
+** NULL before returning.
+**
+** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec()
+** routine returns SQLITE_ABORT without invoking the callback again and
+** without running any subsequent SQL statements.
+**
+** ^The 2nd argument to the sqlite3_exec() callback function is the
+** number of columns in the result. ^The 3rd argument to the sqlite3_exec()
+** callback is an array of pointers to strings obtained as if from
+** [sqlite3_column_text()], one for each column. ^If an element of a
+** result row is NULL then the corresponding string pointer for the
+** sqlite3_exec() callback is a NULL pointer. ^The 4th argument to the
+** sqlite3_exec() callback is an array of pointers to strings where each
+** entry represents the name of corresponding result column as obtained
+** from [sqlite3_column_name()].
+**
+** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer
+** to an empty string, or a pointer that contains only whitespace and/or
+** SQL comments, then no SQL statements are evaluated and the database
+** is not changed.
+**
+** Restrictions:
**
-** {H12134} The [sqlite3_exec(D,S,C,A,E)] routine shall set the value of
-** *E to NULL if E is not NULL and there are no errors.
-**
-** {H12137} The [sqlite3_exec(D,S,C,A,E)] function shall set the [error code]
-** and message accessible via [sqlite3_errcode()],
-** [sqlite3_errmsg()], and [sqlite3_errmsg16()].
-**
-** {H12138} If the S parameter to [sqlite3_exec(D,S,C,A,E)] is NULL or an
-** empty string or contains nothing other than whitespace, comments,
-** and/or semicolons, then results of [sqlite3_errcode()],
-** [sqlite3_errmsg()], and [sqlite3_errmsg16()]
-** shall reset to indicate no errors.
-**
-** ASSUMPTIONS:
-**
-** {A12141} The first parameter to [sqlite3_exec()] must be an valid and open
-** [database connection].
-**
-** {A12142} The database connection must not be closed while
-** [sqlite3_exec()] is running.
-**
-** {A12143} The calling function should use [sqlite3_free()] to free
-** the memory that *errmsg is left pointing at once the error
-** message is no longer needed.
-**
-** {A12145} The SQL statement text in the 2nd parameter to [sqlite3_exec()]
-** must remain unchanged while [sqlite3_exec()] is running.
+** <ul>
+** <li> The application must ensure that the 1st parameter to sqlite3_exec()
+** is a valid and open [database connection].
+** <li> The application must not close the [database connection] specified by
+** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
+** <li> The application must not modify the SQL statement text passed into
+** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
+** </ul>
*/
-int sqlite3_exec(
+SQLITE_API int sqlite3_exec(
sqlite3*, /* An open database */
const char *sql, /* SQL to be evaluated */
int (*callback)(void*,int,char**,char**), /* Callback function */
);
/*
-** CAPI3REF: Result Codes {H10210} <S10700>
-** KEYWORDS: SQLITE_OK {error code} {error codes}
-** KEYWORDS: {result code} {result codes}
+** CAPI3REF: Result Codes
+** KEYWORDS: {result code definitions}
**
** Many SQLite functions return an integer result code from the set shown
-** here in order to indicates success or failure.
+** here in order to indicate success or failure.
**
** New error codes may be added in future versions of SQLite.
**
-** See also: [SQLITE_IOERR_READ | extended result codes]
+** See also: [extended result code definitions]
*/
#define SQLITE_OK 0 /* Successful result */
/* beginning-of-error-codes */
-#define SQLITE_ERROR 1 /* SQL error or missing database */
+#define SQLITE_ERROR 1 /* Generic error */
#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */
#define SQLITE_PERM 3 /* Access permission denied */
#define SQLITE_ABORT 4 /* Callback routine requested an abort */
#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/
#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */
#define SQLITE_CORRUPT 11 /* The database disk image is malformed */
-#define SQLITE_NOTFOUND 12 /* NOT USED. Table or record not found */
+#define SQLITE_NOTFOUND 12 /* Unknown opcode in sqlite3_file_control() */
#define SQLITE_FULL 13 /* Insertion failed because database is full */
#define SQLITE_CANTOPEN 14 /* Unable to open the database file */
-#define SQLITE_PROTOCOL 15 /* NOT USED. Database lock protocol error */
-#define SQLITE_EMPTY 16 /* Database is empty */
+#define SQLITE_PROTOCOL 15 /* Database lock protocol error */
+#define SQLITE_EMPTY 16 /* Internal use only */
#define SQLITE_SCHEMA 17 /* The database schema changed */
#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */
#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */
#define SQLITE_MISUSE 21 /* Library used incorrectly */
#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */
#define SQLITE_AUTH 23 /* Authorization denied */
-#define SQLITE_FORMAT 24 /* Auxiliary database format error */
+#define SQLITE_FORMAT 24 /* Not used */
#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */
#define SQLITE_NOTADB 26 /* File opened that is not a database file */
+#define SQLITE_NOTICE 27 /* Notifications from sqlite3_log() */
+#define SQLITE_WARNING 28 /* Warnings from sqlite3_log() */
#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */
#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */
/* end-of-error-codes */
/*
-** CAPI3REF: Extended Result Codes {H10220} <S10700>
-** KEYWORDS: {extended error code} {extended error codes}
-** KEYWORDS: {extended result code} {extended result codes}
+** CAPI3REF: Extended Result Codes
+** KEYWORDS: {extended result code definitions}
**
-** In its default configuration, SQLite API routines return one of 26 integer
-** [SQLITE_OK | result codes]. However, experience has shown that many of
+** In its default configuration, SQLite API routines return one of 30 integer
+** [result codes]. However, experience has shown that many of
** these result codes are too coarse-grained. They do not provide as
** much information about problems as programmers might like. In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
+** address this, newer versions of SQLite (version 3.3.8 [dateof:3.3.8]
+** and later) include
** support for additional result codes that provide more detailed information
-** about errors. The extended result codes are enabled or disabled
+** about errors. These [extended result codes] are enabled or disabled
** on a per database connection basis using the
-** [sqlite3_extended_result_codes()] API.
-**
-** Some of the available extended result codes are listed here.
-** One may expect the number of extended result codes will be expand
-** over time. Software that uses extended result codes should expect
-** to see new result codes in future releases of SQLite.
-**
-** The SQLITE_OK result code will never be extended. It will always
-** be exactly zero.
-**
-** INVARIANTS:
-**
-** {H10223} The symbolic name for an extended result code shall contains
-** a related primary result code as a prefix.
-**
-** {H10224} Primary result code names shall contain a single "_" character.
-**
-** {H10225} Extended result code names shall contain two or more "_" characters.
-**
-** {H10226} The numeric value of an extended result code shall contain the
-** numeric value of its corresponding primary result code in
-** its least significant 8 bits.
+** [sqlite3_extended_result_codes()] API. Or, the extended code for
+** the most recent error can be obtained using
+** [sqlite3_extended_errcode()].
*/
#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8))
#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8))
#define SQLITE_IOERR_ACCESS (SQLITE_IOERR | (13<<8))
#define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8))
#define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8))
-
-/*
-** CAPI3REF: Flags For File Open Operations {H10230} <H11120> <H12700>
+#define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8))
+#define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8))
+#define SQLITE_IOERR_SHMOPEN (SQLITE_IOERR | (18<<8))
+#define SQLITE_IOERR_SHMSIZE (SQLITE_IOERR | (19<<8))
+#define SQLITE_IOERR_SHMLOCK (SQLITE_IOERR | (20<<8))
+#define SQLITE_IOERR_SHMMAP (SQLITE_IOERR | (21<<8))
+#define SQLITE_IOERR_SEEK (SQLITE_IOERR | (22<<8))
+#define SQLITE_IOERR_DELETE_NOENT (SQLITE_IOERR | (23<<8))
+#define SQLITE_IOERR_MMAP (SQLITE_IOERR | (24<<8))
+#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR | (25<<8))
+#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
+#define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8))
+#define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8))
+#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8))
+#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8))
+#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8))
+#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
+#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
+#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
+#define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8))
+#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8))
+#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8))
+#define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8))
+#define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8))
+#define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8))
+#define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8))
+#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8))
+#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8))
+#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8))
+#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8))
+#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8))
+#define SQLITE_CONSTRAINT_FOREIGNKEY (SQLITE_CONSTRAINT | (3<<8))
+#define SQLITE_CONSTRAINT_FUNCTION (SQLITE_CONSTRAINT | (4<<8))
+#define SQLITE_CONSTRAINT_NOTNULL (SQLITE_CONSTRAINT | (5<<8))
+#define SQLITE_CONSTRAINT_PRIMARYKEY (SQLITE_CONSTRAINT | (6<<8))
+#define SQLITE_CONSTRAINT_TRIGGER (SQLITE_CONSTRAINT | (7<<8))
+#define SQLITE_CONSTRAINT_UNIQUE (SQLITE_CONSTRAINT | (8<<8))
+#define SQLITE_CONSTRAINT_VTAB (SQLITE_CONSTRAINT | (9<<8))
+#define SQLITE_CONSTRAINT_ROWID (SQLITE_CONSTRAINT |(10<<8))
+#define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE | (1<<8))
+#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
+#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8))
+#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8))
+#define SQLITE_OK_LOAD_PERMANENTLY (SQLITE_OK | (1<<8))
+
+/*
+** CAPI3REF: Flags For File Open Operations
**
** These bit values are intended for use in the
** 3rd parameter to the [sqlite3_open_v2()] interface and
-** in the 4th parameter to the xOpen method of the
-** [sqlite3_vfs] object.
-*/
-#define SQLITE_OPEN_READONLY 0x00000001
-#define SQLITE_OPEN_READWRITE 0x00000002
-#define SQLITE_OPEN_CREATE 0x00000004
-#define SQLITE_OPEN_DELETEONCLOSE 0x00000008
-#define SQLITE_OPEN_EXCLUSIVE 0x00000010
-#define SQLITE_OPEN_MAIN_DB 0x00000100
-#define SQLITE_OPEN_TEMP_DB 0x00000200
-#define SQLITE_OPEN_TRANSIENT_DB 0x00000400
-#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800
-#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000
-#define SQLITE_OPEN_SUBJOURNAL 0x00002000
-#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000
-#define SQLITE_OPEN_NOMUTEX 0x00008000
-#define SQLITE_OPEN_FULLMUTEX 0x00010000
-
-/*
-** CAPI3REF: Device Characteristics {H10240} <H11120>
-**
-** The xDeviceCapabilities method of the [sqlite3_io_methods]
-** object returns an integer which is a vector of the these
+** in the 4th parameter to the [sqlite3_vfs.xOpen] method.
+*/
+#define SQLITE_OPEN_READONLY 0x00000001 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_READWRITE 0x00000002 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_CREATE 0x00000004 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_DELETEONCLOSE 0x00000008 /* VFS only */
+#define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */
+#define SQLITE_OPEN_AUTOPROXY 0x00000020 /* VFS only */
+#define SQLITE_OPEN_URI 0x00000040 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_MEMORY 0x00000080 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */
+#define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */
+#define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */
+#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800 /* VFS only */
+#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000 /* VFS only */
+#define SQLITE_OPEN_SUBJOURNAL 0x00002000 /* VFS only */
+#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000 /* VFS only */
+#define SQLITE_OPEN_NOMUTEX 0x00008000 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_FULLMUTEX 0x00010000 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_SHAREDCACHE 0x00020000 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_PRIVATECACHE 0x00040000 /* Ok for sqlite3_open_v2() */
+#define SQLITE_OPEN_WAL 0x00080000 /* VFS only */
+
+/* Reserved: 0x00F00000 */
+
+/*
+** CAPI3REF: Device Characteristics
+**
+** The xDeviceCharacteristics method of the [sqlite3_io_methods]
+** object returns an integer which is a vector of these
** bit values expressing I/O characteristics of the mass storage
** device that holds the file that the [sqlite3_io_methods]
** refers to.
** first then the size of the file is extended, never the other
** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
** information is written to disk in the same order as calls
-** to xWrite().
-*/
-#define SQLITE_IOCAP_ATOMIC 0x00000001
-#define SQLITE_IOCAP_ATOMIC512 0x00000002
-#define SQLITE_IOCAP_ATOMIC1K 0x00000004
-#define SQLITE_IOCAP_ATOMIC2K 0x00000008
-#define SQLITE_IOCAP_ATOMIC4K 0x00000010
-#define SQLITE_IOCAP_ATOMIC8K 0x00000020
-#define SQLITE_IOCAP_ATOMIC16K 0x00000040
-#define SQLITE_IOCAP_ATOMIC32K 0x00000080
-#define SQLITE_IOCAP_ATOMIC64K 0x00000100
-#define SQLITE_IOCAP_SAFE_APPEND 0x00000200
-#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
-
-/*
-** CAPI3REF: File Locking Levels {H10250} <H11120> <H11310>
+** to xWrite(). The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that
+** after reboot following a crash or power loss, the only bytes in a
+** file that were written at the application level might have changed
+** and that adjacent bytes, even bytes within the same sector are
+** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
+** flag indicates that a file cannot be deleted when open. The
+** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
+** read-only media and cannot be changed even by processes with
+** elevated privileges.
+**
+** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying
+** filesystem supports doing multiple write operations atomically when those
+** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and
+** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].
+*/
+#define SQLITE_IOCAP_ATOMIC 0x00000001
+#define SQLITE_IOCAP_ATOMIC512 0x00000002
+#define SQLITE_IOCAP_ATOMIC1K 0x00000004
+#define SQLITE_IOCAP_ATOMIC2K 0x00000008
+#define SQLITE_IOCAP_ATOMIC4K 0x00000010
+#define SQLITE_IOCAP_ATOMIC8K 0x00000020
+#define SQLITE_IOCAP_ATOMIC16K 0x00000040
+#define SQLITE_IOCAP_ATOMIC32K 0x00000080
+#define SQLITE_IOCAP_ATOMIC64K 0x00000100
+#define SQLITE_IOCAP_SAFE_APPEND 0x00000200
+#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
+#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
+#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000
+#define SQLITE_IOCAP_IMMUTABLE 0x00002000
+#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000
+
+/*
+** CAPI3REF: File Locking Levels
**
** SQLite uses one of these integer values as the second
** argument to calls it makes to the xLock() and xUnlock() methods
#define SQLITE_LOCK_EXCLUSIVE 4
/*
-** CAPI3REF: Synchronization Type Flags {H10260} <H11120>
+** CAPI3REF: Synchronization Type Flags
**
** When SQLite invokes the xSync() method of an
** [sqlite3_io_methods] object it uses a combination of
**
** When the SQLITE_SYNC_DATAONLY flag is used, it means that the
** sync operation only needs to flush data to mass storage. Inode
-** information need not be flushed. The SQLITE_SYNC_NORMAL flag means
-** to use normal fsync() semantics. The SQLITE_SYNC_FULL flag means
-** to use Mac OS-X style fullsync instead of fsync().
+** information need not be flushed. If the lower four bits of the flag
+** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics.
+** If the lower four bits equal SQLITE_SYNC_FULL, that means
+** to use Mac OS X style fullsync instead of fsync().
+**
+** Do not confuse the SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags
+** with the [PRAGMA synchronous]=NORMAL and [PRAGMA synchronous]=FULL
+** settings. The [synchronous pragma] determines when calls to the
+** xSync VFS method occur and applies uniformly across all platforms.
+** The SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags determine how
+** energetic or rigorous or forceful the sync operations are and
+** only make a difference on Mac OSX for the default SQLite code.
+** (Third-party VFS implementations might also make the distinction
+** between SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL, but among the
+** operating systems natively supported by SQLite, only Mac OSX
+** cares about the difference.)
*/
#define SQLITE_SYNC_NORMAL 0x00002
#define SQLITE_SYNC_FULL 0x00003
#define SQLITE_SYNC_DATAONLY 0x00010
/*
-** CAPI3REF: OS Interface Open File Handle {H11110} <S20110>
+** CAPI3REF: OS Interface Open File Handle
**
-** An [sqlite3_file] object represents an open file in the OS
-** interface layer. Individual OS interface implementations will
+** An [sqlite3_file] object represents an open file in the
+** [sqlite3_vfs | OS interface layer]. Individual OS interface
+** implementations will
** want to subclass this object by appending additional fields
** for their own use. The pMethods entry is a pointer to an
** [sqlite3_io_methods] object that defines methods for performing
};
/*
-** CAPI3REF: OS Interface File Virtual Methods Object {H11120} <S20110>
+** CAPI3REF: OS Interface File Virtual Methods Object
**
-** Every file opened by the [sqlite3_vfs] xOpen method populates an
+** Every file opened by the [sqlite3_vfs.xOpen] method populates an
** [sqlite3_file] object (or, more commonly, a subclass of the
** [sqlite3_file] object) with a pointer to an instance of this object.
** This object defines the methods used to perform various operations
** against the open file represented by the [sqlite3_file] object.
**
+** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element
+** to a non-NULL pointer, then the sqlite3_io_methods.xClose method
+** may be invoked even if the [sqlite3_vfs.xOpen] reported that it failed. The
+** only way to prevent a call to xClose following a failed [sqlite3_vfs.xOpen]
+** is for the [sqlite3_vfs.xOpen] to set the sqlite3_file.pMethods element
+** to NULL.
+**
** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or
** [SQLITE_SYNC_FULL]. The first choice is the normal fsync().
-** The second choice is a Mac OS-X style fullsync. The [SQLITE_SYNC_DATAONLY]
+** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY]
** flag may be ORed in to indicate that only the data of the file
** and not its inode needs to be synced.
**
** locking strategy (for example to use dot-file locks), to inquire
** about the status of a lock, or to break stale locks. The SQLite
** core reserves all opcodes less than 100 for its own use.
-** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available.
+** A [file control opcodes | list of opcodes] less than 100 is available.
** Applications that define a custom xFileControl method should use opcodes
-** greater than 100 to avoid conflicts.
+** greater than 100 to avoid conflicts. VFS implementations should
+** return [SQLITE_NOTFOUND] for file control opcodes that they do not
+** recognize.
**
** The xSectorSize() method returns the sector size of the
** device that underlies the file. The sector size is the
** <li> [SQLITE_IOCAP_ATOMIC64K]
** <li> [SQLITE_IOCAP_SAFE_APPEND]
** <li> [SQLITE_IOCAP_SEQUENTIAL]
+** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
+** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
+** <li> [SQLITE_IOCAP_IMMUTABLE]
+** <li> [SQLITE_IOCAP_BATCH_ATOMIC]
** </ul>
**
** The SQLITE_IOCAP_ATOMIC property means that all writes of
** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
** information is written to disk in the same order as calls
** to xWrite().
+**
+** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill
+** in the unread portions of the buffer with zeros. A VFS that
+** fails to zero-fill short reads might seem to work. However,
+** failure to zero-fill short reads will eventually lead to
+** database corruption.
*/
typedef struct sqlite3_io_methods sqlite3_io_methods;
struct sqlite3_io_methods {
int (*xFileControl)(sqlite3_file*, int op, void *pArg);
int (*xSectorSize)(sqlite3_file*);
int (*xDeviceCharacteristics)(sqlite3_file*);
+ /* Methods above are valid for version 1 */
+ int (*xShmMap)(sqlite3_file*, int iPg, int pgsz, int, void volatile**);
+ int (*xShmLock)(sqlite3_file*, int offset, int n, int flags);
+ void (*xShmBarrier)(sqlite3_file*);
+ int (*xShmUnmap)(sqlite3_file*, int deleteFlag);
+ /* Methods above are valid for version 2 */
+ int (*xFetch)(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp);
+ int (*xUnfetch)(sqlite3_file*, sqlite3_int64 iOfst, void *p);
+ /* Methods above are valid for version 3 */
/* Additional methods may be added in future releases */
};
/*
-** CAPI3REF: Standard File Control Opcodes {H11310} <S30800>
+** CAPI3REF: Standard File Control Opcodes
+** KEYWORDS: {file control opcodes} {file control opcode}
**
** These integer constants are opcodes for the xFileControl method
** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
** interface.
**
+** <ul>
+** <li>[[SQLITE_FCNTL_LOCKSTATE]]
** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This
** opcode causes the xFileControl method to write the current state of
** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
** into an integer that the pArg argument points to. This capability
-** is used during testing and only needs to be supported when SQLITE_TEST
-** is defined.
+** is used during testing and is only available when the SQLITE_TEST
+** compile-time option is used.
+**
+** <li>[[SQLITE_FCNTL_SIZE_HINT]]
+** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
+** layer a hint of how large the database file will grow to be during the
+** current transaction. This hint is not guaranteed to be accurate but it
+** is often close. The underlying VFS might choose to preallocate database
+** file space based on this hint in order to help writes to the database
+** file run faster.
+**
+** <li>[[SQLITE_FCNTL_CHUNK_SIZE]]
+** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
+** extends and truncates the database file in chunks of a size specified
+** by the user. The fourth argument to [sqlite3_file_control()] should
+** point to an integer (type int) containing the new chunk-size to use
+** for the nominated database. Allocating database file space in large
+** chunks (say 1MB at a time), may reduce file-system fragmentation and
+** improve performance on some systems.
+**
+** <li>[[SQLITE_FCNTL_FILE_POINTER]]
+** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
+** to the [sqlite3_file] object associated with a particular database
+** connection. See also [SQLITE_FCNTL_JOURNAL_POINTER].
+**
+** <li>[[SQLITE_FCNTL_JOURNAL_POINTER]]
+** The [SQLITE_FCNTL_JOURNAL_POINTER] opcode is used to obtain a pointer
+** to the [sqlite3_file] object associated with the journal file (either
+** the [rollback journal] or the [write-ahead log]) for a particular database
+** connection. See also [SQLITE_FCNTL_FILE_POINTER].
+**
+** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
+** No longer in use.
+**
+** <li>[[SQLITE_FCNTL_SYNC]]
+** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and
+** sent to the VFS immediately before the xSync method is invoked on a
+** database file descriptor. Or, if the xSync method is not invoked
+** because the user has configured SQLite with
+** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place
+** of the xSync method. In most cases, the pointer argument passed with
+** this file-control is NULL. However, if the database file is being synced
+** as part of a multi-database commit, the argument points to a nul-terminated
+** string containing the transactions master-journal file name. VFSes that
+** do not need this signal should silently ignore this opcode. Applications
+** should not call [sqlite3_file_control()] with this opcode as doing so may
+** disrupt the operation of the specialized VFSes that do require it.
+**
+** <li>[[SQLITE_FCNTL_COMMIT_PHASETWO]]
+** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite
+** and sent to the VFS after a transaction has been committed immediately
+** but before the database is unlocked. VFSes that do not need this signal
+** should silently ignore this opcode. Applications should not call
+** [sqlite3_file_control()] with this opcode as doing so may disrupt the
+** operation of the specialized VFSes that do require it.
+**
+** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]]
+** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic
+** retry counts and intervals for certain disk I/O operations for the
+** windows [VFS] in order to provide robustness in the presence of
+** anti-virus programs. By default, the windows VFS will retry file read,
+** file write, and file delete operations up to 10 times, with a delay
+** of 25 milliseconds before the first retry and with the delay increasing
+** by an additional 25 milliseconds with each subsequent retry. This
+** opcode allows these two values (10 retries and 25 milliseconds of delay)
+** to be adjusted. The values are changed for all database connections
+** within the same process. The argument is a pointer to an array of two
+** integers where the first integer is the new retry count and the second
+** integer is the delay. If either integer is negative, then the setting
+** is not changed but instead the prior value of that setting is written
+** into the array entry, allowing the current retry settings to be
+** interrogated. The zDbName parameter is ignored.
+**
+** <li>[[SQLITE_FCNTL_PERSIST_WAL]]
+** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the
+** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary
+** write ahead log and shared memory files used for transaction control
+** are automatically deleted when the latest connection to the database
+** closes. Setting persistent WAL mode causes those files to persist after
+** close. Persisting the files is useful when other processes that do not
+** have write permission on the directory containing the database file want
+** to read the database file, as the WAL and shared memory files must exist
+** in order for the database to be readable. The fourth parameter to
+** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
+** That integer is 0 to disable persistent WAL mode or 1 to enable persistent
+** WAL mode. If the integer is -1, then it is overwritten with the current
+** WAL persistence setting.
+**
+** <li>[[SQLITE_FCNTL_POWERSAFE_OVERWRITE]]
+** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the
+** persistent "powersafe-overwrite" or "PSOW" setting. The PSOW setting
+** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the
+** xDeviceCharacteristics methods. The fourth parameter to
+** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
+** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage
+** mode. If the integer is -1, then it is overwritten with the current
+** zero-damage mode setting.
+**
+** <li>[[SQLITE_FCNTL_OVERWRITE]]
+** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening
+** a write transaction to indicate that, unless it is rolled back for some
+** reason, the entire database file will be overwritten by the current
+** transaction. This is used by VACUUM operations.
+**
+** <li>[[SQLITE_FCNTL_VFSNAME]]
+** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of
+** all [VFSes] in the VFS stack. The names are of all VFS shims and the
+** final bottom-level VFS are written into memory obtained from
+** [sqlite3_malloc()] and the result is stored in the char* variable
+** that the fourth parameter of [sqlite3_file_control()] points to.
+** The caller is responsible for freeing the memory when done. As with
+** all file-control actions, there is no guarantee that this will actually
+** do anything. Callers should initialize the char* variable to a NULL
+** pointer in case this file-control is not implemented. This file-control
+** is intended for diagnostic use only.
+**
+** <li>[[SQLITE_FCNTL_VFS_POINTER]]
+** ^The [SQLITE_FCNTL_VFS_POINTER] opcode finds a pointer to the top-level
+** [VFSes] currently in use. ^(The argument X in
+** sqlite3_file_control(db,SQLITE_FCNTL_VFS_POINTER,X) must be
+** of type "[sqlite3_vfs] **". This opcodes will set *X
+** to a pointer to the top-level VFS.)^
+** ^When there are multiple VFS shims in the stack, this opcode finds the
+** upper-most shim only.
+**
+** <li>[[SQLITE_FCNTL_PRAGMA]]
+** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]
+** file control is sent to the open [sqlite3_file] object corresponding
+** to the database file to which the pragma statement refers. ^The argument
+** to the [SQLITE_FCNTL_PRAGMA] file control is an array of
+** pointers to strings (char**) in which the second element of the array
+** is the name of the pragma and the third element is the argument to the
+** pragma or NULL if the pragma has no argument. ^The handler for an
+** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element
+** of the char** argument point to a string obtained from [sqlite3_mprintf()]
+** or the equivalent and that string will become the result of the pragma or
+** the error message if the pragma fails. ^If the
+** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal
+** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA]
+** file control returns [SQLITE_OK], then the parser assumes that the
+** VFS has handled the PRAGMA itself and the parser generates a no-op
+** prepared statement if result string is NULL, or that returns a copy
+** of the result string if the string is non-NULL.
+** ^If the [SQLITE_FCNTL_PRAGMA] file control returns
+** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means
+** that the VFS encountered an error while handling the [PRAGMA] and the
+** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA]
+** file control occurs at the beginning of pragma statement analysis and so
+** it is able to override built-in [PRAGMA] statements.
+**
+** <li>[[SQLITE_FCNTL_BUSYHANDLER]]
+** ^The [SQLITE_FCNTL_BUSYHANDLER]
+** file-control may be invoked by SQLite on the database file handle
+** shortly after it is opened in order to provide a custom VFS with access
+** to the connections busy-handler callback. The argument is of type (void **)
+** - an array of two (void *) values. The first (void *) actually points
+** to a function of type (int (*)(void *)). In order to invoke the connections
+** busy-handler, this function should be invoked with the second (void *) in
+** the array as the only argument. If it returns non-zero, then the operation
+** should be retried. If it returns zero, the custom VFS should abandon the
+** current operation.
+**
+** <li>[[SQLITE_FCNTL_TEMPFILENAME]]
+** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control
+** to have SQLite generate a
+** temporary filename using the same algorithm that is followed to generate
+** temporary filenames for TEMP tables and other internal uses. The
+** argument should be a char** which will be filled with the filename
+** written into memory obtained from [sqlite3_malloc()]. The caller should
+** invoke [sqlite3_free()] on the result to avoid a memory leak.
+**
+** <li>[[SQLITE_FCNTL_MMAP_SIZE]]
+** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the
+** maximum number of bytes that will be used for memory-mapped I/O.
+** The argument is a pointer to a value of type sqlite3_int64 that
+** is an advisory maximum number of bytes in the file to memory map. The
+** pointer is overwritten with the old value. The limit is not changed if
+** the value originally pointed to is negative, and so the current limit
+** can be queried by passing in a pointer to a negative number. This
+** file-control is used internally to implement [PRAGMA mmap_size].
+**
+** <li>[[SQLITE_FCNTL_TRACE]]
+** The [SQLITE_FCNTL_TRACE] file control provides advisory information
+** to the VFS about what the higher layers of the SQLite stack are doing.
+** This file control is used by some VFS activity tracing [shims].
+** The argument is a zero-terminated string. Higher layers in the
+** SQLite stack may generate instances of this file control if
+** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled.
+**
+** <li>[[SQLITE_FCNTL_HAS_MOVED]]
+** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a
+** pointer to an integer and it writes a boolean into that integer depending
+** on whether or not the file has been renamed, moved, or deleted since it
+** was first opened.
+**
+** <li>[[SQLITE_FCNTL_WIN32_GET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_GET_HANDLE] opcode can be used to obtain the
+** underlying native file handle associated with a file handle. This file
+** control interprets its argument as a pointer to a native file handle and
+** writes the resulting value there.
+**
+** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This
+** opcode causes the xFileControl method to swap the file handle with the one
+** pointed to by the pArg argument. This capability is used during testing
+** and only needs to be supported when SQLITE_TEST is defined.
+**
+** <li>[[SQLITE_FCNTL_WAL_BLOCK]]
+** The [SQLITE_FCNTL_WAL_BLOCK] is a signal to the VFS layer that it might
+** be advantageous to block on the next WAL lock if the lock is not immediately
+** available. The WAL subsystem issues this signal during rare
+** circumstances in order to fix a problem with priority inversion.
+** Applications should <em>not</em> use this file-control.
+**
+** <li>[[SQLITE_FCNTL_ZIPVFS]]
+** The [SQLITE_FCNTL_ZIPVFS] opcode is implemented by zipvfs only. All other
+** VFS should return SQLITE_NOTFOUND for this opcode.
+**
+** <li>[[SQLITE_FCNTL_RBU]]
+** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
+** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
+** this opcode.
+**
+** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
+** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
+** the file descriptor is placed in "batch write mode", which
+** means all subsequent write operations will be deferred and done
+** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems
+** that do not support batch atomic writes will return SQLITE_NOTFOUND.
+** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to
+** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or
+** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make
+** no VFS interface calls on the same [sqlite3_file] file descriptor
+** except for calls to the xWrite method and the xFileControl method
+** with [SQLITE_FCNTL_SIZE_HINT].
+**
+** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
+** This file control returns [SQLITE_OK] if and only if the writes were
+** all performed successfully and have been committed to persistent storage.
+** ^Regardless of whether or not it is successful, this file control takes
+** the file descriptor out of batch write mode so that all subsequent
+** write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
+** ^This file control takes the file descriptor out of batch write mode
+** so that all subsequent write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+** </ul>
*/
-#define SQLITE_FCNTL_LOCKSTATE 1
-
-/*
-** CAPI3REF: Mutex Handle {H17110} <S20130>
+#define SQLITE_FCNTL_LOCKSTATE 1
+#define SQLITE_FCNTL_GET_LOCKPROXYFILE 2
+#define SQLITE_FCNTL_SET_LOCKPROXYFILE 3
+#define SQLITE_FCNTL_LAST_ERRNO 4
+#define SQLITE_FCNTL_SIZE_HINT 5
+#define SQLITE_FCNTL_CHUNK_SIZE 6
+#define SQLITE_FCNTL_FILE_POINTER 7
+#define SQLITE_FCNTL_SYNC_OMITTED 8
+#define SQLITE_FCNTL_WIN32_AV_RETRY 9
+#define SQLITE_FCNTL_PERSIST_WAL 10
+#define SQLITE_FCNTL_OVERWRITE 11
+#define SQLITE_FCNTL_VFSNAME 12
+#define SQLITE_FCNTL_POWERSAFE_OVERWRITE 13
+#define SQLITE_FCNTL_PRAGMA 14
+#define SQLITE_FCNTL_BUSYHANDLER 15
+#define SQLITE_FCNTL_TEMPFILENAME 16
+#define SQLITE_FCNTL_MMAP_SIZE 18
+#define SQLITE_FCNTL_TRACE 19
+#define SQLITE_FCNTL_HAS_MOVED 20
+#define SQLITE_FCNTL_SYNC 21
+#define SQLITE_FCNTL_COMMIT_PHASETWO 22
+#define SQLITE_FCNTL_WIN32_SET_HANDLE 23
+#define SQLITE_FCNTL_WAL_BLOCK 24
+#define SQLITE_FCNTL_ZIPVFS 25
+#define SQLITE_FCNTL_RBU 26
+#define SQLITE_FCNTL_VFS_POINTER 27
+#define SQLITE_FCNTL_JOURNAL_POINTER 28
+#define SQLITE_FCNTL_WIN32_GET_HANDLE 29
+#define SQLITE_FCNTL_PDB 30
+#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31
+#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32
+#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33
+
+/* deprecated names */
+#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
+#define SQLITE_SET_LOCKPROXYFILE SQLITE_FCNTL_SET_LOCKPROXYFILE
+#define SQLITE_LAST_ERRNO SQLITE_FCNTL_LAST_ERRNO
+
+
+/*
+** CAPI3REF: Mutex Handle
**
** The mutex module within SQLite defines [sqlite3_mutex] to be an
** abstract type for a mutex object. The SQLite core never looks
typedef struct sqlite3_mutex sqlite3_mutex;
/*
-** CAPI3REF: OS Interface Object {H11140} <S20100>
+** CAPI3REF: Loadable Extension Thunk
+**
+** A pointer to the opaque sqlite3_api_routines structure is passed as
+** the third parameter to entry points of [loadable extensions]. This
+** structure must be typedefed in order to work around compiler warnings
+** on some platforms.
+*/
+typedef struct sqlite3_api_routines sqlite3_api_routines;
+
+/*
+** CAPI3REF: OS Interface Object
**
** An instance of the sqlite3_vfs object defines the interface between
** the SQLite core and the underlying operating system. The "vfs"
-** in the name of the object stands for "virtual file system".
+** in the name of the object stands for "virtual file system". See
+** the [VFS | VFS documentation] for further information.
**
** The value of the iVersion field is initially 1 but may be larger in
** future versions of SQLite. Additional fields may be appended to this
** The zName field holds the name of the VFS module. The name must
** be unique across all VFS modules.
**
-** {H11141} SQLite will guarantee that the zFilename parameter to xOpen
+** [[sqlite3_vfs.xOpen]]
+** ^SQLite guarantees that the zFilename parameter to xOpen
** is either a NULL pointer or string obtained
-** from xFullPathname(). SQLite further guarantees that
+** from xFullPathname() with an optional suffix added.
+** ^If a suffix is added to the zFilename parameter, it will
+** consist of a single "-" character followed by no more than
+** 11 alphanumeric and/or "-" characters.
+** ^SQLite further guarantees that
** the string will be valid and unchanged until xClose() is
-** called. {END} Because of the previous sentense,
+** called. Because of the previous sentence,
** the [sqlite3_file] can safely store a pointer to the
** filename if it needs to remember the filename for some reason.
-** If the zFilename parameter is xOpen is a NULL pointer then xOpen
-** must invite its own temporary name for the file. Whenever the
+** If the zFilename parameter to xOpen is a NULL pointer then xOpen
+** must invent its own temporary name for the file. ^Whenever the
** xFilename parameter is NULL it will also be the case that the
** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
**
-** {H11142} The flags argument to xOpen() includes all bits set in
+** The flags argument to xOpen() includes all bits set in
** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()]
** or [sqlite3_open16()] is used, then flags includes at least
-** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]. {END}
+** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE].
** If xOpen() opens a file read-only then it sets *pOutFlags to
** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set.
**
-** {H11143} SQLite will also add one of the following flags to the xOpen()
+** ^(SQLite will also add one of the following flags to the xOpen()
** call, depending on the object being opened:
**
** <ul>
** <li> [SQLITE_OPEN_TRANSIENT_DB]
** <li> [SQLITE_OPEN_SUBJOURNAL]
** <li> [SQLITE_OPEN_MASTER_JOURNAL]
-** </ul> {END}
+** <li> [SQLITE_OPEN_WAL]
+** </ul>)^
**
** The file I/O implementation can use the object type flags to
** change the way it deals with files. For example, an application
** <li> [SQLITE_OPEN_EXCLUSIVE]
** </ul>
**
-** {H11145} The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
-** deleted when it is closed. {H11146} The [SQLITE_OPEN_DELETEONCLOSE]
-** will be set for TEMP databases, journals and for subjournals.
-**
-** {H11147} The [SQLITE_OPEN_EXCLUSIVE] flag means the file should be opened
-** for exclusive access. This flag is set for all files except
-** for the main database file.
-**
-** {H11148} At least szOsFile bytes of memory are allocated by SQLite
+** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
+** deleted when it is closed. ^The [SQLITE_OPEN_DELETEONCLOSE]
+** will be set for TEMP databases and their journals, transient
+** databases, and subjournals.
+**
+** ^The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction
+** with the [SQLITE_OPEN_CREATE] flag, which are both directly
+** analogous to the O_EXCL and O_CREAT flags of the POSIX open()
+** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the
+** SQLITE_OPEN_CREATE, is used to indicate that file should always
+** be created, and that it is an error if it already exists.
+** It is <i>not</i> used to indicate the file should be opened
+** for exclusive access.
+**
+** ^At least szOsFile bytes of memory are allocated by SQLite
** to hold the [sqlite3_file] structure passed as the third
-** argument to xOpen. {END} The xOpen method does not have to
-** allocate the structure; it should just fill it in.
-**
-** {H11149} The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
+** argument to xOpen. The xOpen method does not have to
+** allocate the structure; it should just fill it in. Note that
+** the xOpen method must set the sqlite3_file.pMethods to either
+** a valid [sqlite3_io_methods] object or to NULL. xOpen must do
+** this even if the open fails. SQLite expects that the sqlite3_file.pMethods
+** element will be valid after xOpen returns regardless of the success
+** or failure of the xOpen call.
+**
+** [[sqlite3_vfs.xAccess]]
+** ^The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to
** test whether a file is readable and writable, or [SQLITE_ACCESS_READ]
-** to test whether a file is at least readable. {END} The file can be a
+** to test whether a file is at least readable. The file can be a
** directory.
**
-** {H11150} SQLite will always allocate at least mxPathname+1 bytes for the
-** output buffer xFullPathname. {H11151} The exact size of the output buffer
-** is also passed as a parameter to both methods. {END} If the output buffer
+** ^SQLite will always allocate at least mxPathname+1 bytes for the
+** output buffer xFullPathname. The exact size of the output buffer
+** is also passed as a parameter to both methods. If the output buffer
** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is
** handled as a fatal error by SQLite, vfs implementations should endeavor
** to prevent this by setting mxPathname to a sufficiently large value.
**
-** The xRandomness(), xSleep(), and xCurrentTime() interfaces
-** are not strictly a part of the filesystem, but they are
+** The xRandomness(), xSleep(), xCurrentTime(), and xCurrentTimeInt64()
+** interfaces are not strictly a part of the filesystem, but they are
** included in the VFS structure for completeness.
** The xRandomness() function attempts to return nBytes bytes
** of good-quality randomness into zOut. The return value is
** the actual number of bytes of randomness obtained.
** The xSleep() method causes the calling thread to sleep for at
-** least the number of microseconds given. The xCurrentTime()
-** method returns a Julian Day Number for the current date and time.
+** least the number of microseconds given. ^The xCurrentTime()
+** method returns a Julian Day Number for the current date and time as
+** a floating point value.
+** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
+** Day Number multiplied by 86400000 (the number of milliseconds in
+** a 24-hour day).
+** ^SQLite will use the xCurrentTimeInt64() method to get the current
+** date and time if that method is available (if iVersion is 2 or
+** greater and the function pointer is not NULL) and will fall back
+** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
+**
+** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
+** are not used by the SQLite core. These optional interfaces are provided
+** by some VFSes to facilitate testing of the VFS code. By overriding
+** system calls with functions under its control, a test program can
+** simulate faults and error conditions that would otherwise be difficult
+** or impossible to induce. The set of system calls that can be overridden
+** varies from one VFS to another, and from one version of the same VFS to the
+** next. Applications that use these interfaces must be prepared for any
+** or all of these interfaces to be NULL or for their behavior to change
+** from one release to the next. Applications must not attempt to access
+** any of these methods if the iVersion of the VFS is less than 3.
*/
typedef struct sqlite3_vfs sqlite3_vfs;
+typedef void (*sqlite3_syscall_ptr)(void);
struct sqlite3_vfs {
- int iVersion; /* Structure version number */
+ int iVersion; /* Structure version number (currently 3) */
int szOsFile; /* Size of subclassed sqlite3_file */
int mxPathname; /* Maximum file pathname length */
sqlite3_vfs *pNext; /* Next registered VFS */
int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut);
void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename);
void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg);
- void *(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol);
+ void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void);
void (*xDlClose)(sqlite3_vfs*, void*);
int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut);
int (*xSleep)(sqlite3_vfs*, int microseconds);
int (*xCurrentTime)(sqlite3_vfs*, double*);
int (*xGetLastError)(sqlite3_vfs*, int, char *);
- /* New fields may be appended in figure versions. The iVersion
- ** value will increment whenever this happens. */
+ /*
+ ** The methods above are in version 1 of the sqlite_vfs object
+ ** definition. Those that follow are added in version 2 or later
+ */
+ int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*);
+ /*
+ ** The methods above are in versions 1 and 2 of the sqlite_vfs object.
+ ** Those below are for version 3 and greater.
+ */
+ int (*xSetSystemCall)(sqlite3_vfs*, const char *zName, sqlite3_syscall_ptr);
+ sqlite3_syscall_ptr (*xGetSystemCall)(sqlite3_vfs*, const char *zName);
+ const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
+ /*
+ ** The methods above are in versions 1 through 3 of the sqlite_vfs object.
+ ** New fields may be appended in future versions. The iVersion
+ ** value will increment whenever this happens.
+ */
};
/*
-** CAPI3REF: Flags for the xAccess VFS method {H11190} <H11140>
+** CAPI3REF: Flags for the xAccess VFS method
**
-** {H11191} These integer constants can be used as the third parameter to
-** the xAccess method of an [sqlite3_vfs] object. {END} They determine
+** These integer constants can be used as the third parameter to
+** the xAccess method of an [sqlite3_vfs] object. They determine
** what kind of permissions the xAccess method is looking for.
-** {H11192} With SQLITE_ACCESS_EXISTS, the xAccess method
+** With SQLITE_ACCESS_EXISTS, the xAccess method
** simply checks whether the file exists.
-** {H11193} With SQLITE_ACCESS_READWRITE, the xAccess method
-** checks whether the file is both readable and writable.
-** {H11194} With SQLITE_ACCESS_READ, the xAccess method
-** checks whether the file is readable.
+** With SQLITE_ACCESS_READWRITE, the xAccess method
+** checks whether the named directory is both readable and writable
+** (in other words, if files can be added, removed, and renamed within
+** the directory).
+** The SQLITE_ACCESS_READWRITE constant is currently used only by the
+** [temp_store_directory pragma], though this could change in a future
+** release of SQLite.
+** With SQLITE_ACCESS_READ, the xAccess method
+** checks whether the file is readable. The SQLITE_ACCESS_READ constant is
+** currently unused, though it might be used in a future release of
+** SQLite.
*/
#define SQLITE_ACCESS_EXISTS 0
-#define SQLITE_ACCESS_READWRITE 1
-#define SQLITE_ACCESS_READ 2
+#define SQLITE_ACCESS_READWRITE 1 /* Used by PRAGMA temp_store_directory */
+#define SQLITE_ACCESS_READ 2 /* Unused */
+
+/*
+** CAPI3REF: Flags for the xShmLock VFS method
+**
+** These integer constants define the various locking operations
+** allowed by the xShmLock method of [sqlite3_io_methods]. The
+** following are the only legal combinations of flags to the
+** xShmLock method:
+**
+** <ul>
+** <li> SQLITE_SHM_LOCK | SQLITE_SHM_SHARED
+** <li> SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE
+** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED
+** <li> SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE
+** </ul>
+**
+** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as
+** was given on the corresponding lock.
+**
+** The xShmLock method can transition between unlocked and SHARED or
+** between unlocked and EXCLUSIVE. It cannot transition between SHARED
+** and EXCLUSIVE.
+*/
+#define SQLITE_SHM_UNLOCK 1
+#define SQLITE_SHM_LOCK 2
+#define SQLITE_SHM_SHARED 4
+#define SQLITE_SHM_EXCLUSIVE 8
+
+/*
+** CAPI3REF: Maximum xShmLock index
+**
+** The xShmLock method on [sqlite3_io_methods] may use values
+** between 0 and this upper bound as its "offset" argument.
+** The SQLite core will never attempt to acquire or release a
+** lock outside of this range
+*/
+#define SQLITE_SHM_NLOCK 8
+
/*
-** CAPI3REF: Initialize The SQLite Library {H10130} <S20000><S30100>
+** CAPI3REF: Initialize The SQLite Library
**
-** The sqlite3_initialize() routine initializes the
-** SQLite library. The sqlite3_shutdown() routine
+** ^The sqlite3_initialize() routine initializes the
+** SQLite library. ^The sqlite3_shutdown() routine
** deallocates any resources that were allocated by sqlite3_initialize().
+** These routines are designed to aid in process initialization and
+** shutdown on embedded systems. Workstation applications using
+** SQLite normally do not need to invoke either of these routines.
**
** A call to sqlite3_initialize() is an "effective" call if it is
** the first time sqlite3_initialize() is invoked during the lifetime of
** the process, or if it is the first time sqlite3_initialize() is invoked
-** following a call to sqlite3_shutdown(). Only an effective call
+** following a call to sqlite3_shutdown(). ^(Only an effective call
** of sqlite3_initialize() does any initialization. All other calls
-** are harmless no-ops.
+** are harmless no-ops.)^
+**
+** A call to sqlite3_shutdown() is an "effective" call if it is the first
+** call to sqlite3_shutdown() since the last sqlite3_initialize(). ^(Only
+** an effective call to sqlite3_shutdown() does any deinitialization.
+** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^
**
-** Among other things, sqlite3_initialize() shall invoke
-** sqlite3_os_init(). Similarly, sqlite3_shutdown()
-** shall invoke sqlite3_os_end().
+** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown()
+** is not. The sqlite3_shutdown() interface must only be called from a
+** single thread. All open [database connections] must be closed and all
+** other SQLite resources must be deallocated prior to invoking
+** sqlite3_shutdown().
**
-** The sqlite3_initialize() routine returns SQLITE_OK on success.
-** If for some reason, sqlite3_initialize() is unable to initialize
+** Among other things, ^sqlite3_initialize() will invoke
+** sqlite3_os_init(). Similarly, ^sqlite3_shutdown()
+** will invoke sqlite3_os_end().
+**
+** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success.
+** ^If for some reason, sqlite3_initialize() is unable to initialize
** the library (perhaps it is unable to allocate a needed resource such
-** as a mutex) it returns an [error code] other than SQLITE_OK.
+** as a mutex) it returns an [error code] other than [SQLITE_OK].
**
-** The sqlite3_initialize() routine is called internally by many other
+** ^The sqlite3_initialize() routine is called internally by many other
** SQLite interfaces so that an application usually does not need to
** invoke sqlite3_initialize() directly. For example, [sqlite3_open()]
** calls sqlite3_initialize() so the SQLite library will be automatically
** initialized when [sqlite3_open()] is called if it has not be initialized
-** already. However, if SQLite is compiled with the SQLITE_OMIT_AUTOINIT
+** already. ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT]
** compile-time option, then the automatic calls to sqlite3_initialize()
** are omitted and the application must call sqlite3_initialize() directly
** prior to using any other SQLite interface. For maximum portability,
** it is recommended that applications always invoke sqlite3_initialize()
** directly prior to using any other SQLite interface. Future releases
** of SQLite may require this. In other words, the behavior exhibited
-** when SQLite is compiled with SQLITE_OMIT_AUTOINIT might become the
+** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the
** default behavior in some future release of SQLite.
**
** The sqlite3_os_init() routine does operating-system specific
** interface is called automatically by sqlite3_initialize() and
** sqlite3_os_end() is called by sqlite3_shutdown(). Appropriate
** implementations for sqlite3_os_init() and sqlite3_os_end()
-** are built into SQLite when it is compiled for unix, windows, or os/2.
-** When built for other platforms (using the SQLITE_OS_OTHER=1 compile-time
+** are built into SQLite when it is compiled for Unix, Windows, or OS/2.
+** When [custom builds | built for other platforms]
+** (using the [SQLITE_OS_OTHER=1] compile-time
** option) the application must supply a suitable implementation for
** sqlite3_os_init() and sqlite3_os_end(). An application-supplied
** implementation of sqlite3_os_init() or sqlite3_os_end()
-** must return SQLITE_OK on success and some other [error code] upon
+** must return [SQLITE_OK] on success and some other [error code] upon
** failure.
*/
-int sqlite3_initialize(void);
-int sqlite3_shutdown(void);
-int sqlite3_os_init(void);
-int sqlite3_os_end(void);
+SQLITE_API int sqlite3_initialize(void);
+SQLITE_API int sqlite3_shutdown(void);
+SQLITE_API int sqlite3_os_init(void);
+SQLITE_API int sqlite3_os_end(void);
/*
-** CAPI3REF: Configuring The SQLite Library {H10145} <S20000><S30200>
-** EXPERIMENTAL
+** CAPI3REF: Configuring The SQLite Library
**
** The sqlite3_config() interface is used to make global configuration
** changes to SQLite in order to tune SQLite to the specific needs of
** applications and so this routine is usually not necessary. It is
** provided to support rare applications with unusual needs.
**
-** The sqlite3_config() interface is not threadsafe. The application
-** must insure that no other SQLite interfaces are invoked by other
-** threads while sqlite3_config() is running. Furthermore, sqlite3_config()
+** <b>The sqlite3_config() interface is not threadsafe. The application
+** must ensure that no other SQLite interfaces are invoked by other
+** threads while sqlite3_config() is running.</b>
+**
+** The sqlite3_config() interface
** may only be invoked prior to library initialization using
** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
-** Note, however, that sqlite3_config() can be called as part of the
+** ^If sqlite3_config() is called after [sqlite3_initialize()] and before
+** [sqlite3_shutdown()] then it will return SQLITE_MISUSE.
+** Note, however, that ^sqlite3_config() can be called as part of the
** implementation of an application-defined [sqlite3_os_init()].
**
** The first argument to sqlite3_config() is an integer
-** [SQLITE_CONFIG_SINGLETHREAD | configuration option] that determines
+** [configuration option] that determines
** what property of SQLite is to be configured. Subsequent arguments
-** vary depending on the [SQLITE_CONFIG_SINGLETHREAD | configuration option]
+** vary depending on the [configuration option]
** in the first argument.
**
-** When a configuration option is set, sqlite3_config() returns SQLITE_OK.
-** If the option is unknown or SQLite is unable to set the option
+** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
+** ^If the option is unknown or SQLite is unable to set the option
** then this routine returns a non-zero [error code].
*/
-SQLITE_EXPERIMENTAL int sqlite3_config(int, ...);
+SQLITE_API int sqlite3_config(int, ...);
/*
-** CAPI3REF: Configure database connections {H10180} <S20000>
-** EXPERIMENTAL
+** CAPI3REF: Configure database connections
+** METHOD: sqlite3
**
** The sqlite3_db_config() interface is used to make configuration
** changes to a [database connection]. The interface is similar to
** [sqlite3_config()] except that the changes apply to a single
-** [database connection] (specified in the first argument). The
-** sqlite3_db_config() interface can only be used immediately after
-** the database connection is created using [sqlite3_open()],
-** [sqlite3_open16()], or [sqlite3_open_v2()].
+** [database connection] (specified in the first argument).
**
** The second argument to sqlite3_db_config(D,V,...) is the
-** configuration verb - an integer code that indicates what
-** aspect of the [database connection] is being configured.
-** The only choice for this value is [SQLITE_DBCONFIG_LOOKASIDE].
-** New verbs are likely to be added in future releases of SQLite.
-** Additional arguments depend on the verb.
+** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code
+** that indicates what aspect of the [database connection] is being configured.
+** Subsequent arguments vary depending on the configuration verb.
+**
+** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
+** the call is considered successful.
*/
-SQLITE_EXPERIMENTAL int sqlite3_db_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
/*
-** CAPI3REF: Memory Allocation Routines {H10155} <S20120>
-** EXPERIMENTAL
+** CAPI3REF: Memory Allocation Routines
**
** An instance of this object defines the interface between SQLite
** and low-level memory allocation routines.
** This object is used in only one place in the SQLite interface.
** A pointer to an instance of this object is the argument to
** [sqlite3_config()] when the configuration option is
-** [SQLITE_CONFIG_MALLOC]. By creating an instance of this object
-** and passing it to [sqlite3_config()] during configuration, an
-** application can specify an alternative memory allocation subsystem
-** for SQLite to use for all of its dynamic memory needs.
-**
-** Note that SQLite comes with a built-in memory allocator that is
-** perfectly adequate for the overwhelming majority of applications
+** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC].
+** By creating an instance of this object
+** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC])
+** during configuration, an application can specify an alternative
+** memory allocation subsystem for SQLite to use for all of its
+** dynamic memory needs.
+**
+** Note that SQLite comes with several [built-in memory allocators]
+** that are perfectly adequate for the overwhelming majority of applications
** and that this object is only useful to a tiny minority of applications
** with specialized memory allocation requirements. This object is
** also used during testing of SQLite in order to specify an alternative
** order to verify that SQLite recovers gracefully from such
** conditions.
**
-** The xMalloc, xFree, and xRealloc methods must work like the
-** malloc(), free(), and realloc() functions from the standard library.
+** The xMalloc, xRealloc, and xFree methods must work like the
+** malloc(), realloc() and free() functions from the standard C library.
+** ^SQLite guarantees that the second argument to
+** xRealloc is always a value returned by a prior call to xRoundup.
**
** xSize should return the allocated size of a memory allocation
** previously obtained from xMalloc or xRealloc. The allocated size
** a memory allocation given a particular requested size. Most memory
** allocators round up memory allocations at least to the next multiple
** of 8. Some allocators round up to a larger multiple or to a power of 2.
+** Every memory allocation request coming in through [sqlite3_malloc()]
+** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0,
+** that causes the corresponding memory allocation to fail.
**
-** The xInit method initializes the memory allocator. (For example,
+** The xInit method initializes the memory allocator. For example,
** it might allocate any require mutexes or initialize internal data
** structures. The xShutdown method is invoked (indirectly) by
** [sqlite3_shutdown()] and should deallocate any resources acquired
** by xInit. The pAppData pointer is used as the only parameter to
** xInit and xShutdown.
+**
+** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes
+** the xInit method, so the xInit method need not be threadsafe. The
+** xShutdown method is only called from [sqlite3_shutdown()] so it does
+** not need to be threadsafe either. For all other methods, SQLite
+** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the
+** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which
+** it is by default) and so the methods are automatically serialized.
+** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other
+** methods must be threadsafe or else make their own arrangements for
+** serialization.
+**
+** SQLite will never invoke xInit() more than once without an intervening
+** call to xShutdown().
*/
typedef struct sqlite3_mem_methods sqlite3_mem_methods;
struct sqlite3_mem_methods {
};
/*
-** CAPI3REF: Configuration Options {H10160} <S20000>
-** EXPERIMENTAL
+** CAPI3REF: Configuration Options
+** KEYWORDS: {configuration option}
**
** These constants are the available integer configuration options that
** can be passed as the first argument to the [sqlite3_config()] interface.
** is invoked.
**
** <dl>
-** <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
-** <dd>There are no arguments to this option. This option disables
+** [[SQLITE_CONFIG_SINGLETHREAD]] <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
+** <dd>There are no arguments to this option. ^This option sets the
+** [threading mode] to Single-thread. In other words, it disables
** all mutexing and puts SQLite into a mode where it can only be used
-** by a single thread.</dd>
-**
-** <dt>SQLITE_CONFIG_MULTITHREAD</dt>
-** <dd>There are no arguments to this option. This option disables
+** by a single thread. ^If SQLite is compiled with
+** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+** it is not possible to change the [threading mode] from its default
+** value of Single-thread and so [sqlite3_config()] will return
+** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD
+** configuration option.</dd>
+**
+** [[SQLITE_CONFIG_MULTITHREAD]] <dt>SQLITE_CONFIG_MULTITHREAD</dt>
+** <dd>There are no arguments to this option. ^This option sets the
+** [threading mode] to Multi-thread. In other words, it disables
** mutexing on [database connection] and [prepared statement] objects.
** The application is responsible for serializing access to
** [database connections] and [prepared statements]. But other mutexes
** are enabled so that SQLite will be safe to use in a multi-threaded
-** environment.</dd>
-**
-** <dt>SQLITE_CONFIG_SERIALIZED</dt>
-** <dd>There are no arguments to this option. This option enables
+** environment as long as no two threads attempt to use the same
+** [database connection] at the same time. ^If SQLite is compiled with
+** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+** it is not possible to set the Multi-thread [threading mode] and
+** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
+** SQLITE_CONFIG_MULTITHREAD configuration option.</dd>
+**
+** [[SQLITE_CONFIG_SERIALIZED]] <dt>SQLITE_CONFIG_SERIALIZED</dt>
+** <dd>There are no arguments to this option. ^This option sets the
+** [threading mode] to Serialized. In other words, this option enables
** all mutexes including the recursive
** mutexes on [database connection] and [prepared statement] objects.
** In this mode (which is the default when SQLite is compiled with
** to [database connections] and [prepared statements] so that the
** application is free to use the same [database connection] or the
** same [prepared statement] in different threads at the same time.
-**
-** <p>This configuration option merely sets the default mutex
-** behavior to serialize access to [database connections]. Individual
-** [database connections] can override this setting
-** using the [SQLITE_OPEN_NOMUTEX] flag to [sqlite3_open_v2()].</p></dd>
-**
-** <dt>SQLITE_CONFIG_MALLOC</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** instance of the [sqlite3_mem_methods] structure. The argument specifies
+** ^If SQLite is compiled with
+** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+** it is not possible to set the Serialized [threading mode] and
+** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
+** SQLITE_CONFIG_SERIALIZED configuration option.</dd>
+**
+** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt>
+** <dd> ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is
+** a pointer to an instance of the [sqlite3_mem_methods] structure.
+** The argument specifies
** alternative low-level memory allocation routines to be used in place of
-** the memory allocation routines built into SQLite.</dd>
-**
-** <dt>SQLITE_CONFIG_GETMALLOC</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** instance of the [sqlite3_mem_methods] structure. The [sqlite3_mem_methods]
-** structure is filled with the currently defined memory allocation routines.
+** the memory allocation routines built into SQLite.)^ ^SQLite makes
+** its own private copy of the content of the [sqlite3_mem_methods] structure
+** before the [sqlite3_config()] call returns.</dd>
+**
+** [[SQLITE_CONFIG_GETMALLOC]] <dt>SQLITE_CONFIG_GETMALLOC</dt>
+** <dd> ^(The SQLITE_CONFIG_GETMALLOC option takes a single argument which
+** is a pointer to an instance of the [sqlite3_mem_methods] structure.
+** The [sqlite3_mem_methods]
+** structure is filled with the currently defined memory allocation routines.)^
** This option can be used to overload the default memory allocation
** routines with a wrapper that simulations memory allocation failure or
-** tracks memory usage, for example.</dd>
+** tracks memory usage, for example. </dd>
+**
+** [[SQLITE_CONFIG_SMALL_MALLOC]] <dt>SQLITE_CONFIG_SMALL_MALLOC</dt>
+** <dd> ^The SQLITE_CONFIG_SMALL_MALLOC option takes single argument of
+** type int, interpreted as a boolean, which if true provides a hint to
+** SQLite that it should avoid large memory allocations if possible.
+** SQLite will run faster if it is free to make large memory allocations,
+** but some application might prefer to run slower in exchange for
+** guarantees about memory fragmentation that are possible if large
+** allocations are avoided. This hint is normally off.
+** </dd>
**
-** <dt>SQLITE_CONFIG_MEMSTATUS</dt>
-** <dd>This option takes single argument of type int, interpreted as a
-** boolean, which enables or disables the collection of memory allocation
-** statistics. When disabled, the following SQLite interfaces become
-** non-operational:
+** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt>
+** <dd> ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int,
+** interpreted as a boolean, which enables or disables the collection of
+** memory allocation statistics. ^(When memory allocation statistics are
+** disabled, the following SQLite interfaces become non-operational:
** <ul>
** <li> [sqlite3_memory_used()]
** <li> [sqlite3_memory_highwater()]
-** <li> [sqlite3_soft_heap_limit()]
-** <li> [sqlite3_status()]
-** </ul>
+** <li> [sqlite3_soft_heap_limit64()]
+** <li> [sqlite3_status64()]
+** </ul>)^
+** ^Memory allocation statistics are enabled by default unless SQLite is
+** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
+** allocation statistics are disabled by default.
+** </dd>
+**
+** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>
+** <dd> The SQLITE_CONFIG_SCRATCH option is no longer used.
** </dd>
**
-** <dt>SQLITE_CONFIG_SCRATCH</dt>
-** <dd>This option specifies a static memory buffer that SQLite can use for
-** scratch memory. There are three arguments: A pointer to the memory, the
-** size of each scratch buffer (sz), and the number of buffers (N). The sz
-** argument must be a multiple of 16. The sz parameter should be a few bytes
-** larger than the actual scratch space required due internal overhead.
-** The first
-** argument should point to an allocation of at least sz*N bytes of memory.
-** SQLite will use no more than one scratch buffer at once per thread, so
-** N should be set to the expected maximum number of threads. The sz
-** parameter should be 6 times the size of the largest database page size.
-** Scratch buffers are used as part of the btree balance operation. If
-** The btree balancer needs additional memory beyond what is provided by
-** scratch buffers or if no scratch buffer space is specified, then SQLite
-** goes to [sqlite3_malloc()] to obtain the memory it needs.</dd>
-**
-** <dt>SQLITE_CONFIG_PAGECACHE</dt>
-** <dd>This option specifies a static memory buffer that SQLite can use for
-** the database page cache. There are three arguments: A pointer to the
-** memory, the size of each page buffer (sz), and the number of pages (N).
-** The sz argument must be a power of two between 512 and 32768. The first
-** argument should point to an allocation of at least sz*N bytes of memory.
-** SQLite will use the memory provided by the first argument to satisfy its
-** memory needs for the first N pages that it adds to cache. If additional
-** page cache memory is needed beyond what is provided by this option, then
-** SQLite goes to [sqlite3_malloc()] for the additional storage space.
-** The implementation might use one or more of the N buffers to hold
-** memory accounting information. </dd>
-**
-** <dt>SQLITE_CONFIG_HEAP</dt>
-** <dd>This option specifies a static memory buffer that SQLite will use
-** for all of its dynamic memory allocation needs beyond those provided
-** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE].
-** There are three arguments: A pointer to the memory, the number of
-** bytes in the memory buffer, and the minimum allocation size. If
-** the first pointer (the memory pointer) is NULL, then SQLite reverts
+** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
+** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
+** that SQLite can use for the database page cache with the default page
+** cache implementation.
+** This configuration option is a no-op if an application-define page
+** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
+** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
+** 8-byte aligned memory (pMem), the size of each page cache line (sz),
+** and the number of cache lines (N).
+** The sz argument should be the size of the largest database page
+** (a power of two between 512 and 65536) plus some extra bytes for each
+** page header. ^The number of extra bytes needed by the page header
+** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ].
+** ^It is harmless, apart from the wasted memory,
+** for the sz parameter to be larger than necessary. The pMem
+** argument must be either a NULL pointer or a pointer to an 8-byte
+** aligned block of memory of at least sz*N bytes, otherwise
+** subsequent behavior is undefined.
+** ^When pMem is not NULL, SQLite will strive to use the memory provided
+** to satisfy page cache needs, falling back to [sqlite3_malloc()] if
+** a page cache line is larger than sz bytes or if all of the pMem buffer
+** is exhausted.
+** ^If pMem is NULL and N is non-zero, then each database connection
+** does an initial bulk allocation for page cache memory
+** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or
+** of -1024*N bytes if N is negative, . ^If additional
+** page cache memory is needed beyond what is provided by the initial
+** allocation, then SQLite goes to [sqlite3_malloc()] separately for each
+** additional cache line. </dd>
+**
+** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
+** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer
+** that SQLite will use for all of its dynamic memory allocation needs
+** beyond those provided for by [SQLITE_CONFIG_PAGECACHE].
+** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled
+** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns
+** [SQLITE_ERROR] if invoked otherwise.
+** ^There are three arguments to SQLITE_CONFIG_HEAP:
+** An 8-byte aligned pointer to the memory,
+** the number of bytes in the memory buffer, and the minimum allocation size.
+** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
** to using its default memory allocator (the system malloc() implementation),
-** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. If the
-** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or
-** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
-** allocator is engaged to handle all of SQLites memory allocation needs.</dd>
-**
-** <dt>SQLITE_CONFIG_MUTEX</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** instance of the [sqlite3_mutex_methods] structure. The argument specifies
-** alternative low-level mutex routines to be used in place
-** the mutex routines built into SQLite.</dd>
-**
-** <dt>SQLITE_CONFIG_GETMUTEX</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** instance of the [sqlite3_mutex_methods] structure. The
+** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the
+** memory pointer is not NULL then the alternative memory
+** allocator is engaged to handle all of SQLites memory allocation needs.
+** The first pointer (the memory pointer) must be aligned to an 8-byte
+** boundary or subsequent behavior of SQLite will be undefined.
+** The minimum allocation size is capped at 2**12. Reasonable values
+** for the minimum allocation size are 2**5 through 2**8.</dd>
+**
+** [[SQLITE_CONFIG_MUTEX]] <dt>SQLITE_CONFIG_MUTEX</dt>
+** <dd> ^(The SQLITE_CONFIG_MUTEX option takes a single argument which is a
+** pointer to an instance of the [sqlite3_mutex_methods] structure.
+** The argument specifies alternative low-level mutex routines to be used
+** in place the mutex routines built into SQLite.)^ ^SQLite makes a copy of
+** the content of the [sqlite3_mutex_methods] structure before the call to
+** [sqlite3_config()] returns. ^If SQLite is compiled with
+** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+** the entire mutexing subsystem is omitted from the build and hence calls to
+** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will
+** return [SQLITE_ERROR].</dd>
+**
+** [[SQLITE_CONFIG_GETMUTEX]] <dt>SQLITE_CONFIG_GETMUTEX</dt>
+** <dd> ^(The SQLITE_CONFIG_GETMUTEX option takes a single argument which
+** is a pointer to an instance of the [sqlite3_mutex_methods] structure. The
** [sqlite3_mutex_methods]
-** structure is filled with the currently defined mutex routines.
+** structure is filled with the currently defined mutex routines.)^
** This option can be used to overload the default mutex allocation
** routines with a wrapper used to track mutex usage for performance
-** profiling or testing, for example.</dd>
-**
-** <dt>SQLITE_CONFIG_LOOKASIDE</dt>
-** <dd>This option takes two arguments that determine the default
-** memory allcation lookaside optimization. The first argument is the
+** profiling or testing, for example. ^If SQLite is compiled with
+** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+** the entire mutexing subsystem is omitted from the build and hence calls to
+** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will
+** return [SQLITE_ERROR].</dd>
+**
+** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt>
+** <dd> ^(The SQLITE_CONFIG_LOOKASIDE option takes two arguments that determine
+** the default size of lookaside memory on each [database connection].
+** The first argument is the
** size of each lookaside buffer slot and the second is the number of
-** slots allocated to each database connection.</dd>
+** slots allocated to each database connection.)^ ^(SQLITE_CONFIG_LOOKASIDE
+** sets the <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
+** option to [sqlite3_db_config()] can be used to change the lookaside
+** configuration on individual connections.)^ </dd>
+**
+** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt>
+** <dd> ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is
+** a pointer to an [sqlite3_pcache_methods2] object. This object specifies
+** the interface to a custom page cache implementation.)^
+** ^SQLite makes a copy of the [sqlite3_pcache_methods2] object.</dd>
+**
+** [[SQLITE_CONFIG_GETPCACHE2]] <dt>SQLITE_CONFIG_GETPCACHE2</dt>
+** <dd> ^(The SQLITE_CONFIG_GETPCACHE2 option takes a single argument which
+** is a pointer to an [sqlite3_pcache_methods2] object. SQLite copies of
+** the current page cache implementation into that object.)^ </dd>
+**
+** [[SQLITE_CONFIG_LOG]] <dt>SQLITE_CONFIG_LOG</dt>
+** <dd> The SQLITE_CONFIG_LOG option is used to configure the SQLite
+** global [error log].
+** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
+** function with a call signature of void(*)(void*,int,const char*),
+** and a pointer to void. ^If the function pointer is not NULL, it is
+** invoked by [sqlite3_log()] to process each logging event. ^If the
+** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op.
+** ^The void pointer that is the second argument to SQLITE_CONFIG_LOG is
+** passed through as the first parameter to the application-defined logger
+** function whenever that function is invoked. ^The second parameter to
+** the logger function is a copy of the first parameter to the corresponding
+** [sqlite3_log()] call and is intended to be a [result code] or an
+** [extended result code]. ^The third parameter passed to the logger is
+** log message after formatting via [sqlite3_snprintf()].
+** The SQLite logging interface is not reentrant; the logger function
+** supplied by the application must not invoke any SQLite interface.
+** In a multi-threaded application, the application-defined logger
+** function must be threadsafe. </dd>
+**
+** [[SQLITE_CONFIG_URI]] <dt>SQLITE_CONFIG_URI
+** <dd>^(The SQLITE_CONFIG_URI option takes a single argument of type int.
+** If non-zero, then URI handling is globally enabled. If the parameter is zero,
+** then URI handling is globally disabled.)^ ^If URI handling is globally
+** enabled, all filenames passed to [sqlite3_open()], [sqlite3_open_v2()],
+** [sqlite3_open16()] or
+** specified as part of [ATTACH] commands are interpreted as URIs, regardless
+** of whether or not the [SQLITE_OPEN_URI] flag is set when the database
+** connection is opened. ^If it is globally disabled, filenames are
+** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the
+** database connection is opened. ^(By default, URI handling is globally
+** disabled. The default value may be changed by compiling with the
+** [SQLITE_USE_URI] symbol defined.)^
+**
+** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]] <dt>SQLITE_CONFIG_COVERING_INDEX_SCAN
+** <dd>^The SQLITE_CONFIG_COVERING_INDEX_SCAN option takes a single integer
+** argument which is interpreted as a boolean in order to enable or disable
+** the use of covering indices for full table scans in the query optimizer.
+** ^The default setting is determined
+** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on"
+** if that compile-time option is omitted.
+** The ability to disable the use of covering indices for full table scans
+** is because some incorrectly coded legacy applications might malfunction
+** when the optimization is enabled. Providing the ability to
+** disable the optimization allows the older, buggy application code to work
+** without change even with newer versions of SQLite.
+**
+** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
+** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
+** <dd> These options are obsolete and should not be used by new code.
+** They are retained for backwards compatibility but are now no-ops.
+** </dd>
**
+** [[SQLITE_CONFIG_SQLLOG]]
+** <dt>SQLITE_CONFIG_SQLLOG
+** <dd>This option is only available if sqlite is compiled with the
+** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should
+** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int).
+** The second should be of type (void*). The callback is invoked by the library
+** in three separate circumstances, identified by the value passed as the
+** fourth parameter. If the fourth parameter is 0, then the database connection
+** passed as the second argument has just been opened. The third argument
+** points to a buffer containing the name of the main database file. If the
+** fourth parameter is 1, then the SQL statement that the third parameter
+** points to has just been executed. Or, if the fourth parameter is 2, then
+** the connection being passed as the second parameter is being closed. The
+** third parameter is passed NULL In this case. An example of using this
+** configuration option can be seen in the "test_sqllog.c" source file in
+** the canonical SQLite source tree.</dd>
+**
+** [[SQLITE_CONFIG_MMAP_SIZE]]
+** <dt>SQLITE_CONFIG_MMAP_SIZE
+** <dd>^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values
+** that are the default mmap size limit (the default setting for
+** [PRAGMA mmap_size]) and the maximum allowed mmap size limit.
+** ^The default setting can be overridden by each database connection using
+** either the [PRAGMA mmap_size] command, or by using the
+** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size
+** will be silently truncated if necessary so that it does not exceed the
+** compile-time maximum mmap size set by the
+** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^
+** ^If either argument to this option is negative, then that argument is
+** changed to its compile-time default.
+**
+** [[SQLITE_CONFIG_WIN32_HEAPSIZE]]
+** <dt>SQLITE_CONFIG_WIN32_HEAPSIZE
+** <dd>^The SQLITE_CONFIG_WIN32_HEAPSIZE option is only available if SQLite is
+** compiled for Windows with the [SQLITE_WIN32_MALLOC] pre-processor macro
+** defined. ^SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value
+** that specifies the maximum size of the created heap.
+**
+** [[SQLITE_CONFIG_PCACHE_HDRSZ]]
+** <dt>SQLITE_CONFIG_PCACHE_HDRSZ
+** <dd>^The SQLITE_CONFIG_PCACHE_HDRSZ option takes a single parameter which
+** is a pointer to an integer and writes into that integer the number of extra
+** bytes per page required for each page in [SQLITE_CONFIG_PAGECACHE].
+** The amount of extra space required can change depending on the compiler,
+** target platform, and SQLite version.
+**
+** [[SQLITE_CONFIG_PMASZ]]
+** <dt>SQLITE_CONFIG_PMASZ
+** <dd>^The SQLITE_CONFIG_PMASZ option takes a single parameter which
+** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded
+** sorter to that integer. The default minimum PMA Size is set by the
+** [SQLITE_SORTER_PMASZ] compile-time option. New threads are launched
+** to help with sort operations when multithreaded sorting
+** is enabled (using the [PRAGMA threads] command) and the amount of content
+** to be sorted exceeds the page size times the minimum of the
+** [PRAGMA cache_size] setting and this value.
+**
+** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
+** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
+** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
+** becomes the [statement journal] spill-to-disk threshold.
+** [Statement journals] are held in memory until their size (in bytes)
+** exceeds this threshold, at which point they are written to disk.
+** Or if the threshold is -1, statement journals are always held
+** exclusively in memory.
+** Since many statement journals never become large, setting the spill
+** threshold to a value such as 64KiB can greatly reduce the amount of
+** I/O required to support statement rollback.
+** The default value for this setting is controlled by the
+** [SQLITE_STMTJRNL_SPILL] compile-time option.
** </dl>
*/
#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */
#define SQLITE_CONFIG_SERIALIZED 3 /* nil */
#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */
-#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */
+#define SQLITE_CONFIG_SCRATCH 6 /* No longer used */
#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */
#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */
#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */
#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */
#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */
-#define SQLITE_CONFIG_CHUNKALLOC 12 /* int threshold */
+/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */
#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */
-
-/*
-** CAPI3REF: Configuration Options {H10170} <S20000>
-** EXPERIMENTAL
+#define SQLITE_CONFIG_PCACHE 14 /* no-op */
+#define SQLITE_CONFIG_GETPCACHE 15 /* no-op */
+#define SQLITE_CONFIG_LOG 16 /* xFunc, void* */
+#define SQLITE_CONFIG_URI 17 /* int */
+#define SQLITE_CONFIG_PCACHE2 18 /* sqlite3_pcache_methods2* */
+#define SQLITE_CONFIG_GETPCACHE2 19 /* sqlite3_pcache_methods2* */
+#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */
+#define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */
+#define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */
+#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */
+#define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */
+#define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */
+#define SQLITE_CONFIG_STMTJRNL_SPILL 26 /* int nByte */
+#define SQLITE_CONFIG_SMALL_MALLOC 27 /* boolean */
+
+/*
+** CAPI3REF: Database Connection Configuration Options
**
** These constants are the available integer configuration options that
** can be passed as the second argument to the [sqlite3_db_config()] interface.
** New configuration options may be added in future releases of SQLite.
** Existing configuration options might be discontinued. Applications
** should check the return code from [sqlite3_db_config()] to make sure that
-** the call worked. The [sqlite3_db_config()] interface will return a
+** the call worked. ^The [sqlite3_db_config()] interface will return a
** non-zero [error code] if a discontinued or unsupported configuration option
** is invoked.
**
** <dl>
** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
-** <dd>This option takes three additional arguments that determine the
+** <dd> ^This option takes three additional arguments that determine the
** [lookaside memory allocator] configuration for the [database connection].
-** The first argument (the third parameter to [sqlite3_db_config()] is a
-** pointer to a memory buffer to use for lookaside memory. The first
-** argument may be NULL in which case SQLite will allocate the lookaside
-** buffer itself using [sqlite3_malloc()]. The second argument is the
-** size of each lookaside buffer slot and the third argument is the number of
+** ^The first argument (the third parameter to [sqlite3_db_config()] is a
+** pointer to a memory buffer to use for lookaside memory.
+** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb
+** may be NULL in which case SQLite will allocate the
+** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the
+** size of each lookaside buffer slot. ^The third argument is the number of
** slots. The size of the buffer in the first argument must be greater than
-** or equal to the product of the second and third arguments.</dd>
+** or equal to the product of the second and third arguments. The buffer
+** must be aligned to an 8-byte boundary. ^If the second argument to
+** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally
+** rounded down to the next smaller multiple of 8. ^(The lookaside memory
+** configuration for a database connection can only be changed when that
+** connection is not currently using lookaside memory, or in other words
+** when the "current value" returned by
+** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero.
+** Any attempt to change the lookaside memory configuration when lookaside
+** memory is in use leaves the configuration unchanged and returns
+** [SQLITE_BUSY].)^</dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt>
+** <dd> ^This option is used to enable or disable the enforcement of
+** [foreign key constraints]. There should be two additional arguments.
+** The first argument is an integer which is 0 to disable FK enforcement,
+** positive to enable FK enforcement or negative to leave FK enforcement
+** unchanged. The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether FK enforcement is off or on
+** following this call. The second parameter may be a NULL pointer, in
+** which case the FK enforcement setting is not reported back. </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_TRIGGER</dt>
+** <dd> ^This option is used to enable or disable [CREATE TRIGGER | triggers].
+** There should be two additional arguments.
+** The first argument is an integer which is 0 to disable triggers,
+** positive to enable triggers or negative to leave the setting unchanged.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether triggers are disabled or enabled
+** following this call. The second parameter may be a NULL pointer, in
+** which case the trigger setting is not reported back. </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
+** <dd> ^This option is used to enable or disable the two-argument
+** version of the [fts3_tokenizer()] function which is part of the
+** [FTS3] full-text search engine extension.
+** There should be two additional arguments.
+** The first argument is an integer which is 0 to disable fts3_tokenizer() or
+** positive to enable fts3_tokenizer() or negative to leave the setting
+** unchanged.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
+** following this call. The second parameter may be a NULL pointer, in
+** which case the new setting is not reported back. </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt>
+** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()]
+** interface independently of the [load_extension()] SQL function.
+** The [sqlite3_enable_load_extension()] API enables or disables both the
+** C-API [sqlite3_load_extension()] and the SQL function [load_extension()].
+** There should be two additional arguments.
+** When the first argument to this interface is 1, then only the C-API is
+** enabled and the SQL function remains disabled. If the first argument to
+** this interface is 0, then both the C-API and the SQL function are disabled.
+** If the first argument is -1, then no changes are made to state of either the
+** C-API or the SQL function.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface
+** is disabled or enabled following this call. The second parameter may
+** be a NULL pointer, in which case the new setting is not reported back.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
+** <dd> ^This option is used to change the name of the "main" database
+** schema. ^The sole argument is a pointer to a constant UTF8 string
+** which will become the new schema name in place of "main". ^SQLite
+** does not make a copy of the new main schema name string, so the application
+** must ensure that the argument passed into this DBCONFIG option is unchanged
+** until after the database connection closes.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE</dt>
+** <dd> Usually, when a database in wal mode is closed or detached from a
+** database handle, SQLite checks if this will mean that there are now no
+** connections at all to the database. If so, it performs a checkpoint
+** operation before closing the connection. This option may be used to
+** override this behaviour. The first parameter passed to this operation
+** is an integer - non-zero to disable checkpoints-on-close, or zero (the
+** default) to enable them. The second parameter is a pointer to an integer
+** into which is written 0 or 1 to indicate whether checkpoints-on-close
+** have been disabled - 0 if they are not disabled, 1 if they are.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_QPSG</dt>
+** <dd>^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates
+** the [query planner stability guarantee] (QPSG). When the QPSG is active,
+** a single SQL query statement will always use the same algorithm regardless
+** of values of [bound parameters].)^ The QPSG disables some query optimizations
+** that look at the values of bound parameters, which can make some queries
+** slower. But the QPSG has the advantage of more predictable behavior. With
+** the QPSG active, SQLite will always use the same query plan in the field as
+** was used during testing in the lab.
+** </dd>
**
** </dl>
*/
-#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
+#define SQLITE_DBCONFIG_MAINDBNAME 1000 /* const char* */
+#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
+#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
+#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE 1006 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_QPSG 1007 /* int int* */
/*
-** CAPI3REF: Enable Or Disable Extended Result Codes {H12200} <S10700>
-**
-** The sqlite3_extended_result_codes() routine enables or disables the
-** [extended result codes] feature of SQLite. The extended result
-** codes are disabled by default for historical compatibility considerations.
-**
-** INVARIANTS:
-**
-** {H12201} Each new [database connection] shall have the
-** [extended result codes] feature disabled by default.
+** CAPI3REF: Enable Or Disable Extended Result Codes
+** METHOD: sqlite3
**
-** {H12202} The [sqlite3_extended_result_codes(D,F)] interface shall enable
-** [extended result codes] for the [database connection] D
-** if the F parameter is true, or disable them if F is false.
+** ^The sqlite3_extended_result_codes() routine enables or disables the
+** [extended result codes] feature of SQLite. ^The extended result
+** codes are disabled by default for historical compatibility.
*/
-int sqlite3_extended_result_codes(sqlite3*, int onoff);
+SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
/*
-** CAPI3REF: Last Insert Rowid {H12220} <S10700>
+** CAPI3REF: Last Insert Rowid
+** METHOD: sqlite3
**
-** Each entry in an SQLite table has a unique 64-bit signed
-** integer key called the "rowid". The rowid is always available
+** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables)
+** has a unique 64-bit signed
+** integer key called the [ROWID | "rowid"]. ^The rowid is always available
** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
-** names are not also used by explicitly declared columns. If
-** the table has a column of type INTEGER PRIMARY KEY then that column
+** names are not also used by explicitly declared columns. ^If
+** the table has a column of type [INTEGER PRIMARY KEY] then that column
** is another alias for the rowid.
**
-** This routine returns the rowid of the most recent
-** successful INSERT into the database from the [database connection]
-** in the first argument. If no successful INSERTs
-** have ever occurred on that database connection, zero is returned.
-**
-** If an INSERT occurs within a trigger, then the rowid of the inserted
-** row is returned by this routine as long as the trigger is running.
-** But once the trigger terminates, the value returned by this routine
-** reverts to the last value inserted before the trigger fired.
-**
-** An INSERT that fails due to a constraint violation is not a
-** successful INSERT and does not change the value returned by this
-** routine. Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
+** ^The sqlite3_last_insert_rowid(D) interface usually returns the [rowid] of
+** the most recent successful [INSERT] into a rowid table or [virtual table]
+** on database connection D. ^Inserts into [WITHOUT ROWID] tables are not
+** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred
+** on the database connection D, then sqlite3_last_insert_rowid(D) returns
+** zero.
+**
+** As well as being set automatically as rows are inserted into database
+** tables, the value returned by this function may be set explicitly by
+** [sqlite3_set_last_insert_rowid()]
+**
+** Some virtual table implementations may INSERT rows into rowid tables as
+** part of committing a transaction (e.g. to flush data accumulated in memory
+** to disk). In this case subsequent calls to this function return the rowid
+** associated with these internal INSERT operations, which leads to
+** unintuitive results. Virtual table implementations that do write to rowid
+** tables in this way can avoid this problem by restoring the original
+** rowid value using [sqlite3_set_last_insert_rowid()] before returning
+** control to the user.
+**
+** ^(If an [INSERT] occurs within a trigger then this routine will
+** return the [rowid] of the inserted row as long as the trigger is
+** running. Once the trigger program ends, the value returned
+** by this routine reverts to what it was before the trigger was fired.)^
+**
+** ^An [INSERT] that fails due to a constraint violation is not a
+** successful [INSERT] and does not change the value returned by this
+** routine. ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
** and INSERT OR ABORT make no changes to the return value of this
-** routine when their insertion fails. When INSERT OR REPLACE
+** routine when their insertion fails. ^(When INSERT OR REPLACE
** encounters a constraint violation, it does not fail. The
** INSERT continues to completion after deleting rows that caused
** the constraint problem so INSERT OR REPLACE will always change
-** the return value of this interface.
+** the return value of this interface.)^
**
-** For the purposes of this routine, an INSERT is considered to
+** ^For the purposes of this routine, an [INSERT] is considered to
** be successful even if it is subsequently rolled back.
**
-** INVARIANTS:
-**
-** {H12221} The [sqlite3_last_insert_rowid()] function returns the rowid
-** of the most recent successful INSERT performed on the same
-** [database connection] and within the same or higher level
-** trigger context, or zero if there have been no qualifying inserts.
-**
-** {H12223} The [sqlite3_last_insert_rowid()] function returns the
-** same value when called from the same trigger context
-** immediately before and after a ROLLBACK.
-**
-** ASSUMPTIONS:
-**
-** {A12232} If a separate thread performs a new INSERT on the same
-** database connection while the [sqlite3_last_insert_rowid()]
-** function is running and thus changes the last insert rowid,
-** then the value returned by [sqlite3_last_insert_rowid()] is
-** unpredictable and might not equal either the old or the new
-** last insert rowid.
-*/
-sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
-
-/*
-** CAPI3REF: Count The Number Of Rows Modified {H12240} <S10600>
-**
-** This function returns the number of database rows that were changed
-** or inserted or deleted by the most recently completed SQL statement
-** on the [database connection] specified by the first parameter.
-** Only changes that are directly specified by the INSERT, UPDATE,
-** or DELETE statement are counted. Auxiliary changes caused by
-** triggers are not counted. Use the [sqlite3_total_changes()] function
-** to find the total number of changes including changes caused by triggers.
-**
-** A "row change" is a change to a single row of a single table
-** caused by an INSERT, DELETE, or UPDATE statement. Rows that
-** are changed as side effects of REPLACE constraint resolution,
-** rollback, ABORT processing, DROP TABLE, or by any other
-** mechanisms do not count as direct row changes.
-**
-** A "trigger context" is a scope of execution that begins and
-** ends with the script of a trigger. Most SQL statements are
-** evaluated outside of any trigger. This is the "top level"
-** trigger context. If a trigger fires from the top level, a
-** new trigger context is entered for the duration of that one
-** trigger. Subtriggers create subcontexts for their duration.
-**
-** Calling [sqlite3_exec()] or [sqlite3_step()] recursively does
-** not create a new trigger context.
+** This function is accessible to SQL statements via the
+** [last_insert_rowid() SQL function].
**
-** This function returns the number of direct row changes in the
-** most recent INSERT, UPDATE, or DELETE statement within the same
-** trigger context.
-**
-** Thus, when called from the top level, this function returns the
-** number of changes in the most recent INSERT, UPDATE, or DELETE
-** that also occurred at the top level. Within the body of a trigger,
-** the sqlite3_changes() interface can be called to find the number of
-** changes in the most recently completed INSERT, UPDATE, or DELETE
-** statement within the body of the same trigger.
-** However, the number returned does not include changes
-** caused by subtriggers since those have their own context.
+** If a separate thread performs a new [INSERT] on the same
+** database connection while the [sqlite3_last_insert_rowid()]
+** function is running and thus changes the last insert [rowid],
+** then the value returned by [sqlite3_last_insert_rowid()] is
+** unpredictable and might not equal either the old or the new
+** last insert [rowid].
+*/
+SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
+
+/*
+** CAPI3REF: Set the Last Insert Rowid value.
+** METHOD: sqlite3
**
-** SQLite implements the command "DELETE FROM table" without a WHERE clause
-** by dropping and recreating the table. (This is much faster than going
-** through and deleting individual elements from the table.) Because of this
-** optimization, the deletions in "DELETE FROM table" are not row changes and
-** will not be counted by the sqlite3_changes() or [sqlite3_total_changes()]
-** functions, regardless of the number of elements that were originally
-** in the table. To get an accurate count of the number of rows deleted, use
-** "DELETE FROM table WHERE 1" instead.
+** The sqlite3_set_last_insert_rowid(D, R) method allows the application to
+** set the value returned by calling sqlite3_last_insert_rowid(D) to R
+** without inserting a row into the database.
+*/
+SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3*,sqlite3_int64);
+
+/*
+** CAPI3REF: Count The Number Of Rows Modified
+** METHOD: sqlite3
**
-** INVARIANTS:
+** ^This function returns the number of rows modified, inserted or
+** deleted by the most recently completed INSERT, UPDATE or DELETE
+** statement on the database connection specified by the only parameter.
+** ^Executing any other type of SQL statement does not modify the value
+** returned by this function.
**
-** {H12241} The [sqlite3_changes()] function shall return the number of
-** row changes caused by the most recent INSERT, UPDATE,
-** or DELETE statement on the same database connection and
-** within the same or higher trigger context, or zero if there have
-** not been any qualifying row changes.
+** ^Only changes made directly by the INSERT, UPDATE or DELETE statement are
+** considered - auxiliary changes caused by [CREATE TRIGGER | triggers],
+** [foreign key actions] or [REPLACE] constraint resolution are not counted.
+**
+** Changes to a view that are intercepted by
+** [INSTEAD OF trigger | INSTEAD OF triggers] are not counted. ^The value
+** returned by sqlite3_changes() immediately after an INSERT, UPDATE or
+** DELETE statement run on a view is always zero. Only changes made to real
+** tables are counted.
**
-** {H12243} Statements of the form "DELETE FROM tablename" with no
-** WHERE clause shall cause subsequent calls to
-** [sqlite3_changes()] to return zero, regardless of the
-** number of rows originally in the table.
+** Things are more complicated if the sqlite3_changes() function is
+** executed while a trigger program is running. This may happen if the
+** program uses the [changes() SQL function], or if some other callback
+** function invokes sqlite3_changes() directly. Essentially:
+**
+** <ul>
+** <li> ^(Before entering a trigger program the value returned by
+** sqlite3_changes() function is saved. After the trigger program
+** has finished, the original value is restored.)^
+**
+** <li> ^(Within a trigger program each INSERT, UPDATE and DELETE
+** statement sets the value returned by sqlite3_changes()
+** upon completion as normal. Of course, this value will not include
+** any changes performed by sub-triggers, as the sqlite3_changes()
+** value will be saved and restored after each sub-trigger has run.)^
+** </ul>
+**
+** ^This means that if the changes() SQL function (or similar) is used
+** by the first INSERT, UPDATE or DELETE statement within a trigger, it
+** returns the value as set when the calling statement began executing.
+** ^If it is used by the second or subsequent such statement within a trigger
+** program, the value returned reflects the number of rows modified by the
+** previous INSERT, UPDATE or DELETE statement within the same trigger.
**
-** ASSUMPTIONS:
+** See also the [sqlite3_total_changes()] interface, the
+** [count_changes pragma], and the [changes() SQL function].
**
-** {A12252} If a separate thread makes changes on the same database connection
-** while [sqlite3_changes()] is running then the value returned
-** is unpredictable and not meaningful.
+** If a separate thread makes changes on the same database connection
+** while [sqlite3_changes()] is running then the value returned
+** is unpredictable and not meaningful.
*/
-int sqlite3_changes(sqlite3*);
+SQLITE_API int sqlite3_changes(sqlite3*);
/*
-** CAPI3REF: Total Number Of Rows Modified {H12260} <S10600>
-**
-** This function returns the number of row changes caused by INSERT,
-** UPDATE or DELETE statements since the [database connection] was opened.
-** The count includes all changes from all trigger contexts. However,
-** the count does not include changes used to implement REPLACE constraints,
-** do rollbacks or ABORT processing, or DROP table processing.
-** The changes are counted as soon as the statement that makes them is
-** completed (when the statement handle is passed to [sqlite3_reset()] or
-** [sqlite3_finalize()]).
-**
-** SQLite implements the command "DELETE FROM table" without a WHERE clause
-** by dropping and recreating the table. (This is much faster than going
-** through and deleting individual elements from the table.) Because of this
-** optimization, the deletions in "DELETE FROM table" are not row changes and
-** will not be counted by the sqlite3_changes() or [sqlite3_total_changes()]
-** functions, regardless of the number of elements that were originally
-** in the table. To get an accurate count of the number of rows deleted, use
-** "DELETE FROM table WHERE 1" instead.
-**
-** See also the [sqlite3_changes()] interface.
-**
-** INVARIANTS:
+** CAPI3REF: Total Number Of Rows Modified
+** METHOD: sqlite3
**
-** {H12261} The [sqlite3_total_changes()] returns the total number
-** of row changes caused by INSERT, UPDATE, and/or DELETE
-** statements on the same [database connection], in any
-** trigger context, since the database connection was created.
+** ^This function returns the total number of rows inserted, modified or
+** deleted by all [INSERT], [UPDATE] or [DELETE] statements completed
+** since the database connection was opened, including those executed as
+** part of trigger programs. ^Executing any other type of SQL statement
+** does not affect the value returned by sqlite3_total_changes().
+**
+** ^Changes made as part of [foreign key actions] are included in the
+** count, but those made as part of REPLACE constraint resolution are
+** not. ^Changes to a view that are intercepted by INSTEAD OF triggers
+** are not counted.
+**
+** See also the [sqlite3_changes()] interface, the
+** [count_changes pragma], and the [total_changes() SQL function].
**
-** {H12263} Statements of the form "DELETE FROM tablename" with no
-** WHERE clause shall not change the value returned
-** by [sqlite3_total_changes()].
-**
-** ASSUMPTIONS:
-**
-** {A12264} If a separate thread makes changes on the same database connection
-** while [sqlite3_total_changes()] is running then the value
-** returned is unpredictable and not meaningful.
+** If a separate thread makes changes on the same database connection
+** while [sqlite3_total_changes()] is running then the value
+** returned is unpredictable and not meaningful.
*/
-int sqlite3_total_changes(sqlite3*);
-
-/*
-** CAPI3REF: Interrupt A Long-Running Query {H12270} <S30500>
+SQLITE_API int sqlite3_total_changes(sqlite3*);
+
+/*
+** CAPI3REF: Interrupt A Long-Running Query
+** METHOD: sqlite3
**
-** This function causes any pending database operation to abort and
+** ^This function causes any pending database operation to abort and
** return at its earliest opportunity. This routine is typically
** called in response to a user action such as pressing "Cancel"
** or Ctrl-C where the user wants a long query operation to halt
** immediately.
**
-** It is safe to call this routine from a thread different from the
+** ^It is safe to call this routine from a thread different from the
** thread that is currently running the database operation. But it
** is not safe to call this routine with a [database connection] that
** is closed or might close before sqlite3_interrupt() returns.
**
-** If an SQL operation is very nearly finished at the time when
+** ^If an SQL operation is very nearly finished at the time when
** sqlite3_interrupt() is called, then it might not have an opportunity
** to be interrupted and might continue to completion.
**
-** An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
-** If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
+** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
+** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
** that is inside an explicit transaction, then the entire transaction
** will be rolled back automatically.
**
-** A call to sqlite3_interrupt() has no effect on SQL statements
-** that are started after sqlite3_interrupt() returns.
-**
-** INVARIANTS:
-**
-** {H12271} The [sqlite3_interrupt()] interface will force all running
-** SQL statements associated with the same database connection
-** to halt after processing at most one additional row of data.
-**
-** {H12272} Any SQL statement that is interrupted by [sqlite3_interrupt()]
-** will return [SQLITE_INTERRUPT].
-**
-** ASSUMPTIONS:
-**
-** {A12279} If the database connection closes while [sqlite3_interrupt()]
-** is running then bad things will likely happen.
+** ^The sqlite3_interrupt(D) call is in effect until all currently running
+** SQL statements on [database connection] D complete. ^Any new SQL statements
+** that are started after the sqlite3_interrupt() call and before the
+** running statements reaches zero are interrupted as if they had been
+** running prior to the sqlite3_interrupt() call. ^New SQL statements
+** that are started after the running statement count reaches zero are
+** not effected by the sqlite3_interrupt().
+** ^A call to sqlite3_interrupt(D) that occurs when there are no running
+** SQL statements is a no-op and has no effect on SQL statements
+** that are started after the sqlite3_interrupt() call returns.
*/
-void sqlite3_interrupt(sqlite3*);
+SQLITE_API void sqlite3_interrupt(sqlite3*);
/*
-** CAPI3REF: Determine If An SQL Statement Is Complete {H10510} <S70200>
+** CAPI3REF: Determine If An SQL Statement Is Complete
**
-** These routines are useful for command-line input to determine if the
-** currently entered text seems to form complete a SQL statement or
+** These routines are useful during command-line input to determine if the
+** currently entered text seems to form a complete SQL statement or
** if additional input is needed before sending the text into
-** SQLite for parsing. These routines return true if the input string
-** appears to be a complete SQL statement. A statement is judged to be
-** complete if it ends with a semicolon token and is not a fragment of a
-** CREATE TRIGGER statement. Semicolons that are embedded within
+** SQLite for parsing. ^These routines return 1 if the input string
+** appears to be a complete SQL statement. ^A statement is judged to be
+** complete if it ends with a semicolon token and is not a prefix of a
+** well-formed CREATE TRIGGER statement. ^Semicolons that are embedded within
** string literals or quoted identifier names or comments are not
** independent tokens (they are part of the token in which they are
-** embedded) and thus do not count as a statement terminator.
-**
-** These routines do not parse the SQL statements thus
-** will not detect syntactically incorrect SQL.
-**
-** INVARIANTS:
+** embedded) and thus do not count as a statement terminator. ^Whitespace
+** and comments that follow the final semicolon are ignored.
**
-** {H10511} A successful evaluation of [sqlite3_complete()] or
-** [sqlite3_complete16()] functions shall
-** return a numeric 1 if and only if the last non-whitespace
-** token in their input is a semicolon that is not in between
-** the BEGIN and END of a CREATE TRIGGER statement.
+** ^These routines return 0 if the statement is incomplete. ^If a
+** memory allocation fails, then SQLITE_NOMEM is returned.
**
-** {H10512} If a memory allocation error occurs during an invocation
-** of [sqlite3_complete()] or [sqlite3_complete16()] then the
-** routine shall return [SQLITE_NOMEM].
+** ^These routines do not parse the SQL statements thus
+** will not detect syntactically incorrect SQL.
**
-** ASSUMPTIONS:
+** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior
+** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked
+** automatically by sqlite3_complete16(). If that initialization fails,
+** then the return value from sqlite3_complete16() will be non-zero
+** regardless of whether or not the input SQL is complete.)^
**
-** {A10512} The input to [sqlite3_complete()] must be a zero-terminated
-** UTF-8 string.
+** The input to [sqlite3_complete()] must be a zero-terminated
+** UTF-8 string.
**
-** {A10513} The input to [sqlite3_complete16()] must be a zero-terminated
-** UTF-16 string in native byte order.
+** The input to [sqlite3_complete16()] must be a zero-terminated
+** UTF-16 string in native byte order.
*/
-int sqlite3_complete(const char *sql);
-int sqlite3_complete16(const void *sql);
+SQLITE_API int sqlite3_complete(const char *sql);
+SQLITE_API int sqlite3_complete16(const void *sql);
/*
-** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors {H12310} <S40400>
+** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
+** KEYWORDS: {busy-handler callback} {busy handler}
+** METHOD: sqlite3
**
-** This routine sets a callback function that might be invoked whenever
-** an attempt is made to open a database table that another thread
-** or process has locked.
+** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X
+** that might be invoked with argument P whenever
+** an attempt is made to access a database table associated with
+** [database connection] D when another thread
+** or process has the table locked.
+** The sqlite3_busy_handler() interface is used to implement
+** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout].
**
-** If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
-** is returned immediately upon encountering the lock. If the busy callback
-** is not NULL, then the callback will be invoked with two arguments.
+** ^If the busy callback is NULL, then [SQLITE_BUSY]
+** is returned immediately upon encountering the lock. ^If the busy callback
+** is not NULL, then the callback might be invoked with two arguments.
**
-** The first argument to the handler is a copy of the void* pointer which
-** is the third argument to sqlite3_busy_handler(). The second argument to
-** the handler callback is the number of times that the busy handler has
-** been invoked for this locking event. If the
+** ^The first argument to the busy handler is a copy of the void* pointer which
+** is the third argument to sqlite3_busy_handler(). ^The second argument to
+** the busy handler callback is the number of times that the busy handler has
+** been invoked previously for the same locking event. ^If the
** busy callback returns 0, then no additional attempts are made to
-** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.
-** If the callback returns non-zero, then another attempt
-** is made to open the database for reading and the cycle repeats.
+** access the database and [SQLITE_BUSY] is returned
+** to the application.
+** ^If the callback returns non-zero, then another attempt
+** is made to access the database and the cycle repeats.
**
** The presence of a busy handler does not guarantee that it will be invoked
-** when there is lock contention. If SQLite determines that invoking the busy
+** when there is lock contention. ^If SQLite determines that invoking the busy
** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
-** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler.
+** to the application instead of invoking the
+** busy handler.
** Consider a scenario where one process is holding a read lock that
** it is trying to promote to a reserved lock and
** a second process is holding a reserved lock that it is trying
** will induce the first process to release its read lock and allow
** the second process to proceed.
**
-** The default busy callback is NULL.
-**
-** The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
-** when SQLite is in the middle of a large transaction where all the
-** changes will not fit into the in-memory cache. SQLite will
-** already hold a RESERVED lock on the database file, but it needs
-** to promote this lock to EXCLUSIVE so that it can spill cache
-** pages into the database file without harm to concurrent
-** readers. If it is unable to promote the lock, then the in-memory
-** cache will be left in an inconsistent state and so the error
-** code is promoted from the relatively benign [SQLITE_BUSY] to
-** the more severe [SQLITE_IOERR_BLOCKED]. This error code promotion
-** forces an automatic rollback of the changes. See the
-** <a href="/cvstrac/wiki?p=CorruptionFollowingBusyError">
-** CorruptionFollowingBusyError</a> wiki page for a discussion of why
-** this is important.
-**
-** There can only be a single busy handler defined for each
-** [database connection]. Setting a new busy handler clears any
-** previously set handler. Note that calling [sqlite3_busy_timeout()]
-** will also set or clear the busy handler.
-**
-** INVARIANTS:
-**
-** {H12311} The [sqlite3_busy_handler(D,C,A)] function shall replace
-** busy callback in the [database connection] D with a new
-** a new busy handler C and application data pointer A.
-**
-** {H12312} Newly created [database connections] shall have a busy
-** handler of NULL.
-**
-** {H12314} When two or more [database connections] share a
-** [sqlite3_enable_shared_cache | common cache],
-** the busy handler for the database connection currently using
-** the cache shall be invoked when the cache encounters a lock.
+** ^The default busy callback is NULL.
**
-** {H12316} If a busy handler callback returns zero, then the SQLite interface
-** that provoked the locking event shall return [SQLITE_BUSY].
-**
-** {H12318} SQLite shall invokes the busy handler with two arguments which
-** are a copy of the pointer supplied by the 3rd parameter to
-** [sqlite3_busy_handler()] and a count of the number of prior
-** invocations of the busy handler for the same locking event.
-**
-** ASSUMPTIONS:
+** ^(There can only be a single busy handler defined for each
+** [database connection]. Setting a new busy handler clears any
+** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()]
+** or evaluating [PRAGMA busy_timeout=N] will change the
+** busy handler and thus clear any previously set busy handler.
**
-** {A12319} A busy handler must not close the database connection
-** or [prepared statement] that invoked the busy handler.
+** The busy callback should not take any actions which modify the
+** database connection that invoked the busy handler. In other words,
+** the busy handler is not reentrant. Any such actions
+** result in undefined behavior.
+**
+** A busy handler must not close the database connection
+** or [prepared statement] that invoked the busy handler.
*/
-int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
+SQLITE_API int sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
/*
-** CAPI3REF: Set A Busy Timeout {H12340} <S40410>
+** CAPI3REF: Set A Busy Timeout
+** METHOD: sqlite3
**
-** This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
-** for a specified amount of time when a table is locked. The handler
+** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
+** for a specified amount of time when a table is locked. ^The handler
** will sleep multiple times until at least "ms" milliseconds of sleeping
-** have accumulated. {H12343} After "ms" milliseconds of sleeping,
+** have accumulated. ^After at least "ms" milliseconds of sleeping,
** the handler returns 0 which causes [sqlite3_step()] to return
-** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
+** [SQLITE_BUSY].
**
-** Calling this routine with an argument less than or equal to zero
+** ^Calling this routine with an argument less than or equal to zero
** turns off all busy handlers.
**
-** There can only be a single busy handler for a particular
-** [database connection] any any given moment. If another busy handler
+** ^(There can only be a single busy handler for a particular
+** [database connection] at any given moment. If another busy handler
** was defined (using [sqlite3_busy_handler()]) prior to calling
-** this routine, that other busy handler is cleared.
-**
-** INVARIANTS:
+** this routine, that other busy handler is cleared.)^
**
-** {H12341} The [sqlite3_busy_timeout()] function shall override any prior
-** [sqlite3_busy_timeout()] or [sqlite3_busy_handler()] setting
-** on the same [database connection].
-**
-** {H12343} If the 2nd parameter to [sqlite3_busy_timeout()] is less than
-** or equal to zero, then the busy handler shall be cleared so that
-** all subsequent locking events immediately return [SQLITE_BUSY].
-**
-** {H12344} If the 2nd parameter to [sqlite3_busy_timeout()] is a positive
-** number N, then a busy handler shall be set that repeatedly calls
-** the xSleep() method in the [sqlite3_vfs | VFS interface] until
-** either the lock clears or until the cumulative sleep time
-** reported back by xSleep() exceeds N milliseconds.
+** See also: [PRAGMA busy_timeout]
*/
-int sqlite3_busy_timeout(sqlite3*, int ms);
+SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
/*
-** CAPI3REF: Convenience Routines For Running Queries {H12370} <S10000>
+** CAPI3REF: Convenience Routines For Running Queries
+** METHOD: sqlite3
+**
+** This is a legacy interface that is preserved for backwards compatibility.
+** Use of this interface is not recommended.
**
** Definition: A <b>result table</b> is memory data structure created by the
** [sqlite3_get_table()] interface. A result table records the
** It is not safe to pass a result table directly to [sqlite3_free()].
** A result table should be deallocated using [sqlite3_free_table()].
**
-** As an example of the result table format, suppose a query result
+** ^(As an example of the result table format, suppose a query result
** is as follows:
**
** <blockquote><pre>
** azResult[5] = "28";
** azResult[6] = "Cindy";
** azResult[7] = "21";
-** </pre></blockquote>
+** </pre></blockquote>)^
**
-** The sqlite3_get_table() function evaluates one or more
+** ^The sqlite3_get_table() function evaluates one or more
** semicolon-separated SQL statements in the zero-terminated UTF-8
-** string of its 2nd parameter. It returns a result table to the
+** string of its 2nd parameter and returns a result table to the
** pointer given in its 3rd parameter.
**
-** After the calling function has finished using the result, it should
-** pass the pointer to the result table to sqlite3_free_table() in order to
+** After the application has finished with the result from sqlite3_get_table(),
+** it must pass the result table pointer to sqlite3_free_table() in order to
** release the memory that was malloced. Because of the way the
** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling
** function must not try to call [sqlite3_free()] directly. Only
** to any internal data structures of SQLite. It uses only the public
** interface defined here. As a consequence, errors that occur in the
** wrapper layer outside of the internal [sqlite3_exec()] call are not
-** reflected in subsequent calls to [sqlite3_errcode()] or [sqlite3_errmsg()].
-**
-** INVARIANTS:
-**
-** {H12371} If a [sqlite3_get_table()] fails a memory allocation, then
-** it shall free the result table under construction, abort the
-** query in process, skip any subsequent queries, set the
-** *pazResult output pointer to NULL and return [SQLITE_NOMEM].
-**
-** {H12373} If the pnColumn parameter to [sqlite3_get_table()] is not NULL
-** then a successful invocation of [sqlite3_get_table()] shall
-** write the number of columns in the
-** result set of the query into *pnColumn.
-**
-** {H12374} If the pnRow parameter to [sqlite3_get_table()] is not NULL
-** then a successful invocation of [sqlite3_get_table()] shall
-** writes the number of rows in the
-** result set of the query into *pnRow.
-**
-** {H12376} A successful invocation of [sqlite3_get_table()] that computes
-** N rows of result with C columns per row shall make *pazResult
-** point to an array of pointers to (N+1)*C strings where the first
-** C strings are column names as obtained from
-** [sqlite3_column_name()] and the rest are column result values
-** obtained from [sqlite3_column_text()].
-**
-** {H12379} The values in the pazResult array returned by [sqlite3_get_table()]
-** shall remain valid until cleared by [sqlite3_free_table()].
-**
-** {H12382} When an error occurs during evaluation of [sqlite3_get_table()]
-** the function shall set *pazResult to NULL, write an error message
-** into memory obtained from [sqlite3_malloc()], make
-** **pzErrmsg point to that error message, and return a
-** appropriate [error code].
-*/
-int sqlite3_get_table(
+** reflected in subsequent calls to [sqlite3_errcode()] or
+** [sqlite3_errmsg()].
+*/
+SQLITE_API int sqlite3_get_table(
sqlite3 *db, /* An open database */
const char *zSql, /* SQL to be evaluated */
char ***pazResult, /* Results of the query */
int *pnColumn, /* Number of result columns written here */
char **pzErrmsg /* Error msg written here */
);
-void sqlite3_free_table(char **result);
+SQLITE_API void sqlite3_free_table(char **result);
/*
-** CAPI3REF: Formatted String Printing Functions {H17400} <S70000><S20000>
+** CAPI3REF: Formatted String Printing Functions
**
-** These routines are workalikes of the "printf()" family of functions
+** These routines are work-alikes of the "printf()" family of functions
** from the standard C library.
+** These routines understand most of the common K&R formatting options,
+** plus some additional non-standard formats, detailed below.
+** Note that some of the more obscure formatting options from recent
+** C-library standards are omitted from this implementation.
**
-** The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
+** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
** results into memory obtained from [sqlite3_malloc()].
** The strings returned by these two routines should be
-** released by [sqlite3_free()]. Both routines return a
+** released by [sqlite3_free()]. ^Both routines return a
** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
** memory to hold the resulting string.
**
-** In sqlite3_snprintf() routine is similar to "snprintf()" from
+** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from
** the standard C library. The result is written into the
** buffer supplied as the second parameter whose size is given by
** the first parameter. Note that the order of the
-** first two parameters is reversed from snprintf(). This is an
+** first two parameters is reversed from snprintf().)^ This is an
** historical accident that cannot be fixed without breaking
-** backwards compatibility. Note also that sqlite3_snprintf()
+** backwards compatibility. ^(Note also that sqlite3_snprintf()
** returns a pointer to its buffer instead of the number of
-** characters actually written into the buffer. We admit that
+** characters actually written into the buffer.)^ We admit that
** the number of characters written would be a more useful return
** value but we cannot change the implementation of sqlite3_snprintf()
** now without breaking compatibility.
**
-** As long as the buffer size is greater than zero, sqlite3_snprintf()
-** guarantees that the buffer is always zero-terminated. The first
+** ^As long as the buffer size is greater than zero, sqlite3_snprintf()
+** guarantees that the buffer is always zero-terminated. ^The first
** parameter "n" is the total size of the buffer, including space for
** the zero terminator. So the longest string that can be completely
** written will be n-1 characters.
**
+** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf().
+**
** These routines all implement some additional formatting
** options that are useful for constructing SQL statements.
** All of the usual printf() formatting options apply. In addition, there
-** is are "%q", "%Q", and "%z" options.
+** is are "%q", "%Q", "%w" and "%z" options.
**
-** The %q option works like %s in that it substitutes a null-terminated
+** ^(The %q option works like %s in that it substitutes a nul-terminated
** string from the argument list. But %q also doubles every '\'' character.
-** %q is designed for use inside a string literal. By doubling each '\''
+** %q is designed for use inside a string literal.)^ By doubling each '\''
** character it escapes that character and allows it to be inserted into
** the string.
**
** This second example is an SQL syntax error. As a general rule you should
** always use %q instead of %s when inserting text into a string literal.
**
-** The %Q option works like %q except it also adds single quotes around
+** ^(The %Q option works like %q except it also adds single quotes around
** the outside of the total string. Additionally, if the parameter in the
** argument list is a NULL pointer, %Q substitutes the text "NULL" (without
-** single quotes) in place of the %Q option. So, for example, one could say:
+** single quotes).)^ So, for example, one could say:
**
** <blockquote><pre>
** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
** The code above will render a correct SQL statement in the zSQL
** variable even if the zText variable is a NULL pointer.
**
-** The "%z" formatting option works exactly like "%s" with the
-** addition that after the string has been read and copied into
-** the result, [sqlite3_free()] is called on the input string. {END}
-**
-** INVARIANTS:
+** ^(The "%w" formatting option is like "%q" except that it expects to
+** be contained within double-quotes instead of single quotes, and it
+** escapes the double-quote character instead of the single-quote
+** character.)^ The "%w" formatting option is intended for safely inserting
+** table and column names into a constructed SQL statement.
**
-** {H17403} The [sqlite3_mprintf()] and [sqlite3_vmprintf()] interfaces
-** return either pointers to zero-terminated UTF-8 strings held in
-** memory obtained from [sqlite3_malloc()] or NULL pointers if
-** a call to [sqlite3_malloc()] fails.
-**
-** {H17406} The [sqlite3_snprintf()] interface writes a zero-terminated
-** UTF-8 string into the buffer pointed to by the second parameter
-** provided that the first parameter is greater than zero.
-**
-** {H17407} The [sqlite3_snprintf()] interface does not write slots of
-** its output buffer (the second parameter) outside the range
-** of 0 through N-1 (where N is the first parameter)
-** regardless of the length of the string
-** requested by the format specification.
+** ^(The "%z" formatting option works like "%s" but with the
+** addition that after the string has been read and copied into
+** the result, [sqlite3_free()] is called on the input string.)^
*/
-char *sqlite3_mprintf(const char*,...);
-char *sqlite3_vmprintf(const char*, va_list);
-char *sqlite3_snprintf(int,char*,const char*, ...);
+SQLITE_API char *sqlite3_mprintf(const char*,...);
+SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
+SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
+SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list);
/*
-** CAPI3REF: Memory Allocation Subsystem {H17300} <S20000>
+** CAPI3REF: Memory Allocation Subsystem
**
-** The SQLite core uses these three routines for all of its own
+** The SQLite core uses these three routines for all of its own
** internal memory allocation needs. "Core" in the previous sentence
** does not include operating-system specific VFS implementation. The
** Windows VFS uses native malloc() and free() for some operations.
**
-** The sqlite3_malloc() routine returns a pointer to a block
+** ^The sqlite3_malloc() routine returns a pointer to a block
** of memory at least N bytes in length, where N is the parameter.
-** If sqlite3_malloc() is unable to obtain sufficient free
-** memory, it returns a NULL pointer. If the parameter N to
+** ^If sqlite3_malloc() is unable to obtain sufficient free
+** memory, it returns a NULL pointer. ^If the parameter N to
** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
** a NULL pointer.
**
-** Calling sqlite3_free() with a pointer previously returned
+** ^The sqlite3_malloc64(N) routine works just like
+** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead
+** of a signed 32-bit integer.
+**
+** ^Calling sqlite3_free() with a pointer previously returned
** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
-** that it might be reused. The sqlite3_free() routine is
+** that it might be reused. ^The sqlite3_free() routine is
** a no-op if is called with a NULL pointer. Passing a NULL pointer
** to sqlite3_free() is harmless. After being freed, memory
** should neither be read nor written. Even reading previously freed
** memory might result in a segmentation fault or other severe error.
** Memory corruption, a segmentation fault, or other severe error
** might result if sqlite3_free() is called with a non-NULL pointer that
-** was not obtained from sqlite3_malloc() or sqlite3_free().
+** was not obtained from sqlite3_malloc() or sqlite3_realloc().
**
-** The sqlite3_realloc() interface attempts to resize a
-** prior memory allocation to be at least N bytes, where N is the
-** second parameter. The memory allocation to be resized is the first
-** parameter. If the first parameter to sqlite3_realloc()
+** ^The sqlite3_realloc(X,N) interface attempts to resize a
+** prior memory allocation X to be at least N bytes.
+** ^If the X parameter to sqlite3_realloc(X,N)
** is a NULL pointer then its behavior is identical to calling
-** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc().
-** If the second parameter to sqlite3_realloc() is zero or
+** sqlite3_malloc(N).
+** ^If the N parameter to sqlite3_realloc(X,N) is zero or
** negative then the behavior is exactly the same as calling
-** sqlite3_free(P) where P is the first parameter to sqlite3_realloc().
-** sqlite3_realloc() returns a pointer to a memory allocation
-** of at least N bytes in size or NULL if sufficient memory is unavailable.
-** If M is the size of the prior allocation, then min(N,M) bytes
+** sqlite3_free(X).
+** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation
+** of at least N bytes in size or NULL if insufficient memory is available.
+** ^If M is the size of the prior allocation, then min(N,M) bytes
** of the prior allocation are copied into the beginning of buffer returned
-** by sqlite3_realloc() and the prior allocation is freed.
-** If sqlite3_realloc() returns NULL, then the prior allocation
-** is not freed.
-**
-** The memory returned by sqlite3_malloc() and sqlite3_realloc()
-** is always aligned to at least an 8 byte boundary. {END}
-**
-** The default implementation of the memory allocation subsystem uses
-** the malloc(), realloc() and free() provided by the standard C library.
-** {H17382} However, if SQLite is compiled with the
-** SQLITE_MEMORY_SIZE=<i>NNN</i> C preprocessor macro (where <i>NNN</i>
-** is an integer), then SQLite create a static array of at least
-** <i>NNN</i> bytes in size and uses that array for all of its dynamic
-** memory allocation needs. {END} Additional memory allocator options
-** may be added in future releases.
+** by sqlite3_realloc(X,N) and the prior allocation is freed.
+** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the
+** prior allocation is not freed.
+**
+** ^The sqlite3_realloc64(X,N) interfaces works the same as
+** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead
+** of a 32-bit signed integer.
+**
+** ^If X is a memory allocation previously obtained from sqlite3_malloc(),
+** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then
+** sqlite3_msize(X) returns the size of that memory allocation in bytes.
+** ^The value returned by sqlite3_msize(X) might be larger than the number
+** of bytes requested when X was allocated. ^If X is a NULL pointer then
+** sqlite3_msize(X) returns zero. If X points to something that is not
+** the beginning of memory allocation, or if it points to a formerly
+** valid memory allocation that has now been freed, then the behavior
+** of sqlite3_msize(X) is undefined and possibly harmful.
+**
+** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(),
+** sqlite3_malloc64(), and sqlite3_realloc64()
+** is always aligned to at least an 8 byte boundary, or to a
+** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time
+** option is used.
**
** In SQLite version 3.5.0 and 3.5.1, it was possible to define
** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in
** implementation of these routines to be omitted. That capability
** is no longer provided. Only built-in memory allocators can be used.
**
-** The Windows OS interface layer calls
+** Prior to SQLite version 3.7.10, the Windows OS interface layer called
** the system malloc() and free() directly when converting
** filenames between the UTF-8 encoding used by SQLite
** and whatever filename encoding is used by the particular Windows
-** installation. Memory allocation errors are detected, but
-** they are reported back as [SQLITE_CANTOPEN] or
+** installation. Memory allocation errors were detected, but
+** they were reported back as [SQLITE_CANTOPEN] or
** [SQLITE_IOERR] rather than [SQLITE_NOMEM].
**
-** INVARIANTS:
-**
-** {H17303} The [sqlite3_malloc(N)] interface returns either a pointer to
-** a newly checked-out block of at least N bytes of memory
-** that is 8-byte aligned, or it returns NULL if it is unable
-** to fulfill the request.
-**
-** {H17304} The [sqlite3_malloc(N)] interface returns a NULL pointer if
-** N is less than or equal to zero.
-**
-** {H17305} The [sqlite3_free(P)] interface releases memory previously
-** returned from [sqlite3_malloc()] or [sqlite3_realloc()],
-** making it available for reuse.
-**
-** {H17306} A call to [sqlite3_free(NULL)] is a harmless no-op.
-**
-** {H17310} A call to [sqlite3_realloc(0,N)] is equivalent to a call
-** to [sqlite3_malloc(N)].
-**
-** {H17312} A call to [sqlite3_realloc(P,0)] is equivalent to a call
-** to [sqlite3_free(P)].
-**
-** {H17315} The SQLite core uses [sqlite3_malloc()], [sqlite3_realloc()],
-** and [sqlite3_free()] for all of its memory allocation and
-** deallocation needs.
-**
-** {H17318} The [sqlite3_realloc(P,N)] interface returns either a pointer
-** to a block of checked-out memory of at least N bytes in size
-** that is 8-byte aligned, or a NULL pointer.
-**
-** {H17321} When [sqlite3_realloc(P,N)] returns a non-NULL pointer, it first
-** copies the first K bytes of content from P into the newly
-** allocated block, where K is the lesser of N and the size of
-** the buffer P.
-**
-** {H17322} When [sqlite3_realloc(P,N)] returns a non-NULL pointer, it first
-** releases the buffer P.
-**
-** {H17323} When [sqlite3_realloc(P,N)] returns NULL, the buffer P is
-** not modified or released.
-**
-** ASSUMPTIONS:
+** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
+** must be either NULL or else pointers obtained from a prior
+** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
+** not yet been released.
**
-** {A17350} The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
-** must be either NULL or else pointers obtained from a prior
-** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
-** not yet been released.
-**
-** {A17351} The application must not read or write any part of
-** a block of memory after it has been released using
-** [sqlite3_free()] or [sqlite3_realloc()].
+** The application must not read or write any part of
+** a block of memory after it has been released using
+** [sqlite3_free()] or [sqlite3_realloc()].
*/
-void *sqlite3_malloc(int);
-void *sqlite3_realloc(void*, int);
-void sqlite3_free(void*);
+SQLITE_API void *sqlite3_malloc(int);
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
+SQLITE_API void *sqlite3_realloc(void*, int);
+SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64);
+SQLITE_API void sqlite3_free(void*);
+SQLITE_API sqlite3_uint64 sqlite3_msize(void*);
/*
-** CAPI3REF: Memory Allocator Statistics {H17370} <S30210>
+** CAPI3REF: Memory Allocator Statistics
**
** SQLite provides these two interfaces for reporting on the status
** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
** routines, which form the built-in memory allocation subsystem.
**
-** INVARIANTS:
-**
-** {H17371} The [sqlite3_memory_used()] routine returns the number of bytes
-** of memory currently outstanding (malloced but not freed).
-**
-** {H17373} The [sqlite3_memory_highwater()] routine returns the maximum
-** value of [sqlite3_memory_used()] since the high-water mark
-** was last reset.
-**
-** {H17374} The values returned by [sqlite3_memory_used()] and
-** [sqlite3_memory_highwater()] include any overhead
-** added by SQLite in its implementation of [sqlite3_malloc()],
-** but not overhead added by the any underlying system library
-** routines that [sqlite3_malloc()] may call.
+** ^The [sqlite3_memory_used()] routine returns the number of bytes
+** of memory currently outstanding (malloced but not freed).
+** ^The [sqlite3_memory_highwater()] routine returns the maximum
+** value of [sqlite3_memory_used()] since the high-water mark
+** was last reset. ^The values returned by [sqlite3_memory_used()] and
+** [sqlite3_memory_highwater()] include any overhead
+** added by SQLite in its implementation of [sqlite3_malloc()],
+** but not overhead added by the any underlying system library
+** routines that [sqlite3_malloc()] may call.
**
-** {H17375} The memory high-water mark is reset to the current value of
-** [sqlite3_memory_used()] if and only if the parameter to
-** [sqlite3_memory_highwater()] is true. The value returned
-** by [sqlite3_memory_highwater(1)] is the high-water mark
-** prior to the reset.
+** ^The memory high-water mark is reset to the current value of
+** [sqlite3_memory_used()] if and only if the parameter to
+** [sqlite3_memory_highwater()] is true. ^The value returned
+** by [sqlite3_memory_highwater(1)] is the high-water mark
+** prior to the reset.
*/
-sqlite3_int64 sqlite3_memory_used(void);
-sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
/*
-** CAPI3REF: Pseudo-Random Number Generator {H17390} <S20000>
+** CAPI3REF: Pseudo-Random Number Generator
**
** SQLite contains a high-quality pseudo-random number generator (PRNG) used to
-** select random ROWIDs when inserting new records into a table that
-** already uses the largest possible ROWID. The PRNG is also used for
+** select random [ROWID | ROWIDs] when inserting new records into a table that
+** already uses the largest possible [ROWID]. The PRNG is also used for
** the build-in random() and randomblob() SQL functions. This interface allows
** applications to access the same PRNG for other purposes.
**
-** A call to this routine stores N bytes of randomness into buffer P.
+** ^A call to this routine stores N bytes of randomness into buffer P.
+** ^The P parameter can be a NULL pointer.
**
-** The first time this routine is invoked (either internally or by
-** the application) the PRNG is seeded using randomness obtained
-** from the xRandomness method of the default [sqlite3_vfs] object.
-** On all subsequent invocations, the pseudo-randomness is generated
+** ^If this routine has not been previously called or if the previous
+** call had N less than one or a NULL pointer for P, then the PRNG is
+** seeded using randomness obtained from the xRandomness method of
+** the default [sqlite3_vfs] object.
+** ^If the previous call to this routine had an N of 1 or more and a
+** non-NULL P then the pseudo-randomness is generated
** internally and without recourse to the [sqlite3_vfs] xRandomness
** method.
-**
-** INVARIANTS:
-**
-** {H17392} The [sqlite3_randomness(N,P)] interface writes N bytes of
-** high-quality pseudo-randomness into buffer P.
*/
-void sqlite3_randomness(int N, void *P);
+SQLITE_API void sqlite3_randomness(int N, void *P);
/*
-** CAPI3REF: Compile-Time Authorization Callbacks {H12500} <S70100>
+** CAPI3REF: Compile-Time Authorization Callbacks
+** METHOD: sqlite3
+** KEYWORDS: {authorizer callback}
**
-** This routine registers a authorizer callback with a particular
+** ^This routine registers an authorizer callback with a particular
** [database connection], supplied in the first argument.
-** The authorizer callback is invoked as SQL statements are being compiled
+** ^The authorizer callback is invoked as SQL statements are being compiled
** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
-** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. At various
+** [sqlite3_prepare_v3()], [sqlite3_prepare16()], [sqlite3_prepare16_v2()],
+** and [sqlite3_prepare16_v3()]. ^At various
** points during the compilation process, as logic is being created
** to perform various actions, the authorizer callback is invoked to
-** see if those actions are allowed. The authorizer callback should
+** see if those actions are allowed. ^The authorizer callback should
** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the
** specific action but allow the SQL statement to continue to be
** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be
-** rejected with an error. If the authorizer callback returns
+** rejected with an error. ^If the authorizer callback returns
** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY]
** then the [sqlite3_prepare_v2()] or equivalent call that triggered
** the authorizer will fail with an error message.
**
** When the callback returns [SQLITE_OK], that means the operation
-** requested is ok. When the callback returns [SQLITE_DENY], the
+** requested is ok. ^When the callback returns [SQLITE_DENY], the
** [sqlite3_prepare_v2()] or equivalent call that triggered the
** authorizer will fail with an error message explaining that
-** access is denied. If the authorizer code is [SQLITE_READ]
+** access is denied.
+**
+** ^The first parameter to the authorizer callback is a copy of the third
+** parameter to the sqlite3_set_authorizer() interface. ^The second parameter
+** to the callback is an integer [SQLITE_COPY | action code] that specifies
+** the particular action to be authorized. ^The third through sixth parameters
+** to the callback are either NULL pointers or zero-terminated strings
+** that contain additional details about the action to be authorized.
+** Applications must always be prepared to encounter a NULL pointer in any
+** of the third through the sixth parameters of the authorization callback.
+**
+** ^If the action code is [SQLITE_READ]
** and the callback returns [SQLITE_IGNORE] then the
** [prepared statement] statement is constructed to substitute
** a NULL value in place of the table column that would have
** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE]
** return can be used to deny an untrusted user access to individual
** columns of a table.
-**
-** The first parameter to the authorizer callback is a copy of the third
-** parameter to the sqlite3_set_authorizer() interface. The second parameter
-** to the callback is an integer [SQLITE_COPY | action code] that specifies
-** the particular action to be authorized. The third through sixth parameters
-** to the callback are zero-terminated strings that contain additional
-** details about the action to be authorized.
+** ^When a table is referenced by a [SELECT] but no column values are
+** extracted from that table (for example in a query like
+** "SELECT count(*) FROM tab") then the [SQLITE_READ] authorizer callback
+** is invoked once for that table with a column name that is an empty string.
+** ^If the action code is [SQLITE_DELETE] and the callback returns
+** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the
+** [truncate optimization] is disabled and all rows are deleted individually.
**
** An authorizer is used when [sqlite3_prepare | preparing]
** SQL statements from an untrusted source, to ensure that the SQL statements
** and limiting database size using the [max_page_count] [PRAGMA]
** in addition to using an authorizer.
**
-** Only a single authorizer can be in place on a database connection
+** ^(Only a single authorizer can be in place on a database connection
** at a time. Each call to sqlite3_set_authorizer overrides the
-** previous call. Disable the authorizer by installing a NULL callback.
+** previous call.)^ ^Disable the authorizer by installing a NULL callback.
** The authorizer is disabled by default.
**
-** When [sqlite3_prepare_v2()] is used to prepare a statement, the
-** statement might be reprepared during [sqlite3_step()] due to a
+** The authorizer callback must not do anything that will modify
+** the database connection that invoked the authorizer callback.
+** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
+** database connections for the meaning of "modify" in this paragraph.
+**
+** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the
+** statement might be re-prepared during [sqlite3_step()] due to a
** schema change. Hence, the application should ensure that the
** correct authorizer callback remains in place during the [sqlite3_step()].
**
-** Note that the authorizer callback is invoked only during
+** ^Note that the authorizer callback is invoked only during
** [sqlite3_prepare()] or its variants. Authorization is not
-** performed during statement evaluation in [sqlite3_step()].
-**
-** INVARIANTS:
-**
-** {H12501} The [sqlite3_set_authorizer(D,...)] interface registers a
-** authorizer callback with database connection D.
-**
-** {H12502} The authorizer callback is invoked as SQL statements are
-** being parseed and compiled.
-**
-** {H12503} If the authorizer callback returns any value other than
-** [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY], then
-** the application interface call that caused
-** the authorizer callback to run shall fail with an
-** [SQLITE_ERROR] error code and an appropriate error message.
-**
-** {H12504} When the authorizer callback returns [SQLITE_OK], the operation
-** described is processed normally.
-**
-** {H12505} When the authorizer callback returns [SQLITE_DENY], the
-** application interface call that caused the
-** authorizer callback to run shall fail
-** with an [SQLITE_ERROR] error code and an error message
-** explaining that access is denied.
-**
-** {H12506} If the authorizer code (the 2nd parameter to the authorizer
-** callback) is [SQLITE_READ] and the authorizer callback returns
-** [SQLITE_IGNORE], then the prepared statement is constructed to
-** insert a NULL value in place of the table column that would have
-** been read if [SQLITE_OK] had been returned.
-**
-** {H12507} If the authorizer code (the 2nd parameter to the authorizer
-** callback) is anything other than [SQLITE_READ], then
-** a return of [SQLITE_IGNORE] has the same effect as [SQLITE_DENY].
-**
-** {H12510} The first parameter to the authorizer callback is a copy of
-** the third parameter to the [sqlite3_set_authorizer()] interface.
-**
-** {H12511} The second parameter to the callback is an integer
-** [SQLITE_COPY | action code] that specifies the particular action
-** to be authorized.
-**
-** {H12512} The third through sixth parameters to the callback are
-** zero-terminated strings that contain
-** additional details about the action to be authorized.
-**
-** {H12520} Each call to [sqlite3_set_authorizer()] overrides
-** any previously installed authorizer.
-**
-** {H12521} A NULL authorizer means that no authorization
-** callback is invoked.
-**
-** {H12522} The default authorizer is NULL.
+** performed during statement evaluation in [sqlite3_step()], unless
+** as stated in the previous paragraph, sqlite3_step() invokes
+** sqlite3_prepare_v2() to reprepare a statement after a schema change.
*/
-int sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
sqlite3*,
int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
void *pUserData
);
/*
-** CAPI3REF: Authorizer Return Codes {H12590} <H12500>
+** CAPI3REF: Authorizer Return Codes
**
** The [sqlite3_set_authorizer | authorizer callback function] must
** return either [SQLITE_OK] or one of these two constants in order
** to signal SQLite whether or not the action is permitted. See the
** [sqlite3_set_authorizer | authorizer documentation] for additional
** information.
+**
+** Note that SQLITE_IGNORE is also used as a [conflict resolution mode]
+** returned from the [sqlite3_vtab_on_conflict()] interface.
*/
#define SQLITE_DENY 1 /* Abort the SQL statement with an error */
#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */
/*
-** CAPI3REF: Authorizer Action Codes {H12550} <H12500>
+** CAPI3REF: Authorizer Action Codes
**
** The [sqlite3_set_authorizer()] interface registers a callback function
** that is invoked to authorize certain SQL statement actions. The
** These action code values signify what kind of operation is to be
** authorized. The 3rd and 4th parameters to the authorization
** callback function will be parameters or NULL depending on which of these
-** codes is used as the second parameter. The 5th parameter to the
+** codes is used as the second parameter. ^(The 5th parameter to the
** authorizer callback is the name of the database ("main", "temp",
-** etc.) if applicable. The 6th parameter to the authorizer callback
+** etc.) if applicable.)^ ^The 6th parameter to the authorizer callback
** is the name of the inner-most trigger or view that is responsible for
** the access attempt or NULL if this access attempt is directly from
** top-level SQL code.
-**
-** INVARIANTS:
-**
-** {H12551} The second parameter to an
-** [sqlite3_set_authorizer | authorizer callback] shall be an integer
-** [SQLITE_COPY | authorizer code] that specifies what action
-** is being authorized.
-**
-** {H12552} The 3rd and 4th parameters to the
-** [sqlite3_set_authorizer | authorization callback]
-** shall be parameters or NULL depending on which
-** [SQLITE_COPY | authorizer code] is used as the second parameter.
-**
-** {H12553} The 5th parameter to the
-** [sqlite3_set_authorizer | authorizer callback] shall be the name
-** of the database (example: "main", "temp", etc.) if applicable.
-**
-** {H12554} The 6th parameter to the
-** [sqlite3_set_authorizer | authorizer callback] shall be the name
-** of the inner-most trigger or view that is responsible for
-** the access attempt or NULL if this access attempt is directly from
-** top-level SQL code.
*/
/******************************************* 3rd ************ 4th ***********/
#define SQLITE_CREATE_INDEX 1 /* Index Name Table Name */
#define SQLITE_PRAGMA 19 /* Pragma Name 1st arg or NULL */
#define SQLITE_READ 20 /* Table Name Column Name */
#define SQLITE_SELECT 21 /* NULL NULL */
-#define SQLITE_TRANSACTION 22 /* NULL NULL */
+#define SQLITE_TRANSACTION 22 /* Operation NULL */
#define SQLITE_UPDATE 23 /* Table Name Column Name */
#define SQLITE_ATTACH 24 /* Filename NULL */
#define SQLITE_DETACH 25 /* Database Name NULL */
#define SQLITE_ANALYZE 28 /* Table Name NULL */
#define SQLITE_CREATE_VTABLE 29 /* Table Name Module Name */
#define SQLITE_DROP_VTABLE 30 /* Table Name Module Name */
-#define SQLITE_FUNCTION 31 /* Function Name NULL */
+#define SQLITE_FUNCTION 31 /* NULL Function Name */
+#define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */
#define SQLITE_COPY 0 /* No longer used */
+#define SQLITE_RECURSIVE 33 /* NULL NULL */
/*
-** CAPI3REF: Tracing And Profiling Functions {H12280} <S60400>
-** EXPERIMENTAL
+** CAPI3REF: Tracing And Profiling Functions
+** METHOD: sqlite3
+**
+** These routines are deprecated. Use the [sqlite3_trace_v2()] interface
+** instead of the routines described here.
**
** These routines register callback functions that can be used for
** tracing and profiling the execution of SQL statements.
**
-** The callback function registered by sqlite3_trace() is invoked at
+** ^The callback function registered by sqlite3_trace() is invoked at
** various times when an SQL statement is being run by [sqlite3_step()].
-** The callback returns a UTF-8 rendering of the SQL statement text
-** as the statement first begins executing. Additional callbacks occur
+** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the
+** SQL statement text as the statement first begins executing.
+** ^(Additional sqlite3_trace() callbacks might occur
** as each triggered subprogram is entered. The callbacks for triggers
-** contain a UTF-8 SQL comment that identifies the trigger.
+** contain a UTF-8 SQL comment that identifies the trigger.)^
**
-** The callback function registered by sqlite3_profile() is invoked
-** as each SQL statement finishes. The profile callback contains
-** the original statement text and an estimate of wall-clock time
-** of how long that statement took to run.
+** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit
+** the length of [bound parameter] expansion in the output of sqlite3_trace().
**
-** INVARIANTS:
+** ^The callback function registered by sqlite3_profile() is invoked
+** as each SQL statement finishes. ^The profile callback contains
+** the original statement text and an estimate of wall-clock time
+** of how long that statement took to run. ^The profile callback
+** time is in units of nanoseconds, however the current implementation
+** is only capable of millisecond resolution so the six least significant
+** digits in the time are meaningless. Future versions of SQLite
+** might provide greater resolution on the profiler callback. The
+** sqlite3_profile() function is considered experimental and is
+** subject to change in future versions of SQLite.
+*/
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_trace(sqlite3*,
+ void(*xTrace)(void*,const char*), void*);
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
+ void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
+
+/*
+** CAPI3REF: SQL Trace Event Codes
+** KEYWORDS: SQLITE_TRACE
**
-** {H12281} The callback function registered by [sqlite3_trace()]
-** shall be invoked
-** whenever an SQL statement first begins to execute and
-** whenever a trigger subprogram first begins to run.
+** These constants identify classes of events that can be monitored
+** using the [sqlite3_trace_v2()] tracing logic. The third argument
+** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of
+** the following constants. ^The first argument to the trace callback
+** is one of the following constants.
**
-** {H12282} Each call to [sqlite3_trace()] shall override the previously
-** registered trace callback.
+** New tracing constants may be added in future releases.
**
-** {H12283} A NULL trace callback shall disable tracing.
+** ^A trace callback has four arguments: xCallback(T,C,P,X).
+** ^The T argument is one of the integer type codes above.
+** ^The C argument is a copy of the context pointer passed in as the
+** fourth argument to [sqlite3_trace_v2()].
+** The P and X arguments are pointers whose meanings depend on T.
**
-** {H12284} The first argument to the trace callback shall be a copy of
-** the pointer which was the 3rd argument to [sqlite3_trace()].
+** <dl>
+** [[SQLITE_TRACE_STMT]] <dt>SQLITE_TRACE_STMT</dt>
+** <dd>^An SQLITE_TRACE_STMT callback is invoked when a prepared statement
+** first begins running and possibly at other times during the
+** execution of the prepared statement, such as at the start of each
+** trigger subprogram. ^The P argument is a pointer to the
+** [prepared statement]. ^The X argument is a pointer to a string which
+** is the unexpanded SQL text of the prepared statement or an SQL comment
+** that indicates the invocation of a trigger. ^The callback can compute
+** the same text that would have been returned by the legacy [sqlite3_trace()]
+** interface by using the X argument when X begins with "--" and invoking
+** [sqlite3_expanded_sql(P)] otherwise.
+**
+** [[SQLITE_TRACE_PROFILE]] <dt>SQLITE_TRACE_PROFILE</dt>
+** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same
+** information as is provided by the [sqlite3_profile()] callback.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument points to a 64-bit integer which is the estimated of
+** the number of nanosecond that the prepared statement took to run.
+** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes.
+**
+** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
+** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared
+** statement generates a single row of result.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument is unused.
+**
+** [[SQLITE_TRACE_CLOSE]] <dt>SQLITE_TRACE_CLOSE</dt>
+** <dd>^An SQLITE_TRACE_CLOSE callback is invoked when a database
+** connection closes.
+** ^The P argument is a pointer to the [database connection] object
+** and the X argument is unused.
+** </dl>
+*/
+#define SQLITE_TRACE_STMT 0x01
+#define SQLITE_TRACE_PROFILE 0x02
+#define SQLITE_TRACE_ROW 0x04
+#define SQLITE_TRACE_CLOSE 0x08
+
+/*
+** CAPI3REF: SQL Trace Hook
+** METHOD: sqlite3
**
-** {H12285} The second argument to the trace callback is a
-** zero-terminated UTF-8 string containing the original text
-** of the SQL statement as it was passed into [sqlite3_prepare_v2()]
-** or the equivalent, or an SQL comment indicating the beginning
-** of a trigger subprogram.
+** ^The sqlite3_trace_v2(D,M,X,P) interface registers a trace callback
+** function X against [database connection] D, using property mask M
+** and context pointer P. ^If the X callback is
+** NULL or if the M mask is zero, then tracing is disabled. The
+** M argument should be the bitwise OR-ed combination of
+** zero or more [SQLITE_TRACE] constants.
**
-** {H12287} The callback function registered by [sqlite3_profile()] is invoked
-** as each SQL statement finishes.
+** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides
+** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2().
**
-** {H12288} The first parameter to the profile callback is a copy of
-** the 3rd parameter to [sqlite3_profile()].
+** ^The X callback is invoked whenever any of the events identified by
+** mask M occur. ^The integer return value from the callback is currently
+** ignored, though this may change in future releases. Callback
+** implementations should return zero to ensure future compatibility.
**
-** {H12289} The second parameter to the profile callback is a
-** zero-terminated UTF-8 string that contains the complete text of
-** the SQL statement as it was processed by [sqlite3_prepare_v2()]
-** or the equivalent.
+** ^A trace callback is invoked with four arguments: callback(T,C,P,X).
+** ^The T argument is one of the [SQLITE_TRACE]
+** constants to indicate why the callback was invoked.
+** ^The C argument is a copy of the context pointer.
+** The P and X arguments are pointers whose meanings depend on T.
**
-** {H12290} The third parameter to the profile callback is an estimate
-** of the number of nanoseconds of wall-clock time required to
-** run the SQL statement from start to finish.
+** The sqlite3_trace_v2() interface is intended to replace the legacy
+** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which
+** are deprecated.
*/
-SQLITE_EXPERIMENTAL void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
-SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*,
- void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
+SQLITE_API int sqlite3_trace_v2(
+ sqlite3*,
+ unsigned uMask,
+ int(*xCallback)(unsigned,void*,void*,void*),
+ void *pCtx
+);
/*
-** CAPI3REF: Query Progress Callbacks {H12910} <S60400>
+** CAPI3REF: Query Progress Callbacks
+** METHOD: sqlite3
**
-** This routine configures a callback function - the
-** progress callback - that is invoked periodically during long
-** running calls to [sqlite3_exec()], [sqlite3_step()] and
-** [sqlite3_get_table()]. An example use for this
+** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
+** function X to be invoked periodically during long running calls to
+** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for
+** database connection D. An example use for this
** interface is to keep a GUI updated during a large query.
**
-** If the progress callback returns non-zero, the operation is
-** interrupted. This feature can be used to implement a
-** "Cancel" button on a GUI dialog box.
+** ^The parameter P is passed through as the only parameter to the
+** callback function X. ^The parameter N is the approximate number of
+** [virtual machine instructions] that are evaluated between successive
+** invocations of the callback X. ^If N is less than one then the progress
+** handler is disabled.
**
-** INVARIANTS:
+** ^Only a single progress handler may be defined at one time per
+** [database connection]; setting a new progress handler cancels the
+** old one. ^Setting parameter X to NULL disables the progress handler.
+** ^The progress handler is also disabled by setting N to a value less
+** than 1.
**
-** {H12911} The callback function registered by sqlite3_progress_handler()
-** is invoked periodically during long running calls to
-** [sqlite3_step()].
-**
-** {H12912} The progress callback is invoked once for every N virtual
-** machine opcodes, where N is the second argument to
-** the [sqlite3_progress_handler()] call that registered
-** the callback. If N is less than 1, sqlite3_progress_handler()
-** acts as if a NULL progress handler had been specified.
-**
-** {H12913} The progress callback itself is identified by the third
-** argument to sqlite3_progress_handler().
-**
-** {H12914} The fourth argument to sqlite3_progress_handler() is a
-** void pointer passed to the progress callback
-** function each time it is invoked.
-**
-** {H12915} If a call to [sqlite3_step()] results in fewer than N opcodes
-** being executed, then the progress callback is never invoked.
-**
-** {H12916} Every call to [sqlite3_progress_handler()]
-** overwrites any previously registered progress handler.
+** ^If the progress callback returns non-zero, the operation is
+** interrupted. This feature can be used to implement a
+** "Cancel" button on a GUI progress dialog box.
**
-** {H12917} If the progress handler callback is NULL then no progress
-** handler is invoked.
+** The progress handler callback must not do anything that will modify
+** the database connection that invoked the progress handler.
+** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
+** database connections for the meaning of "modify" in this paragraph.
**
-** {H12918} If the progress callback returns a result other than 0, then
-** the behavior is a if [sqlite3_interrupt()] had been called.
-** <S30500>
*/
-void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
/*
-** CAPI3REF: Opening A New Database Connection {H12700} <S40200>
+** CAPI3REF: Opening A New Database Connection
+** CONSTRUCTOR: sqlite3
**
-** These routines open an SQLite database file whose name is given by the
-** filename argument. The filename argument is interpreted as UTF-8 for
+** ^These routines open an SQLite database file as specified by the
+** filename argument. ^The filename argument is interpreted as UTF-8 for
** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
-** order for sqlite3_open16(). A [database connection] handle is usually
+** order for sqlite3_open16(). ^(A [database connection] handle is usually
** returned in *ppDb, even if an error occurs. The only exception is that
** if SQLite is unable to allocate memory to hold the [sqlite3] object,
** a NULL will be written into *ppDb instead of a pointer to the [sqlite3]
-** object. If the database is opened (and/or created) successfully, then
-** [SQLITE_OK] is returned. Otherwise an [error code] is returned. The
+** object.)^ ^(If the database is opened (and/or created) successfully, then
+** [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The
** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain
-** an English language description of the error.
+** an English language description of the error following a failure of any
+** of the sqlite3_open() routines.
**
-** The default encoding for the database will be UTF-8 if
-** sqlite3_open() or sqlite3_open_v2() is called and
-** UTF-16 in the native byte order if sqlite3_open16() is used.
+** ^The default encoding will be UTF-8 for databases created using
+** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases
+** created using sqlite3_open16() will be UTF-16 in the native byte order.
**
** Whether or not an error occurs when it is opened, resources
** associated with the [database connection] handle should be released by
**
** The sqlite3_open_v2() interface works like sqlite3_open()
** except that it accepts two additional parameters for additional control
-** over the new database connection. The flags parameter can take one of
+** over the new database connection. ^(The flags parameter to
+** sqlite3_open_v2() can take one of
** the following three values, optionally combined with the
-** [SQLITE_OPEN_NOMUTEX] flag:
+** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE],
+** [SQLITE_OPEN_PRIVATECACHE], and/or [SQLITE_OPEN_URI] flags:)^
**
** <dl>
-** <dt>[SQLITE_OPEN_READONLY]</dt>
+** ^(<dt>[SQLITE_OPEN_READONLY]</dt>
** <dd>The database is opened in read-only mode. If the database does not
-** already exist, an error is returned.</dd>
+** already exist, an error is returned.</dd>)^
**
-** <dt>[SQLITE_OPEN_READWRITE]</dt>
+** ^(<dt>[SQLITE_OPEN_READWRITE]</dt>
** <dd>The database is opened for reading and writing if possible, or reading
** only if the file is write protected by the operating system. In either
-** case the database must already exist, otherwise an error is returned.</dd>
+** case the database must already exist, otherwise an error is returned.</dd>)^
**
-** <dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
-** <dd>The database is opened for reading and writing, and is creates it if
+** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
+** <dd>The database is opened for reading and writing, and is created if
** it does not already exist. This is the behavior that is always used for
-** sqlite3_open() and sqlite3_open16().</dd>
+** sqlite3_open() and sqlite3_open16().</dd>)^
** </dl>
**
** If the 3rd parameter to sqlite3_open_v2() is not one of the
-** combinations shown above or one of the combinations shown above combined
-** with the [SQLITE_OPEN_NOMUTEX] flag, then the behavior is undefined.
-**
-** If the [SQLITE_OPEN_NOMUTEX] flag is set, then mutexes on the
-** opened [database connection] are disabled and the appliation must
-** insure that access to the [database connection] and its associated
-** [prepared statements] is serialized. The [SQLITE_OPEN_NOMUTEX] flag
-** is the default behavior is SQLite is configured using the
-** [SQLITE_CONFIG_MULTITHREAD] or [SQLITE_CONFIG_SINGLETHREAD] options
-** to [sqlite3_config()]. The [SQLITE_OPEN_NOMUTEX] flag only makes a
-** difference when SQLite is in its default [SQLITE_CONFIG_SERIALIZED] mode.
-**
-** If the filename is ":memory:", then a private, temporary in-memory database
-** is created for the connection. This in-memory database will vanish when
+** combinations shown above optionally combined with other
+** [SQLITE_OPEN_READONLY | SQLITE_OPEN_* bits]
+** then the behavior is undefined.
+**
+** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection
+** opens in the multi-thread [threading mode] as long as the single-thread
+** mode has not been set at compile-time or start-time. ^If the
+** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens
+** in the serialized [threading mode] unless single-thread was
+** previously selected at compile-time or start-time.
+** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be
+** eligible to use [shared cache mode], regardless of whether or not shared
+** cache is enabled using [sqlite3_enable_shared_cache()]. ^The
+** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not
+** participate in [shared cache mode] even if it is enabled.
+**
+** ^The fourth parameter to sqlite3_open_v2() is the name of the
+** [sqlite3_vfs] object that defines the operating system interface that
+** the new database connection should use. ^If the fourth parameter is
+** a NULL pointer then the default [sqlite3_vfs] object is used.
+**
+** ^If the filename is ":memory:", then a private, temporary in-memory database
+** is created for the connection. ^This in-memory database will vanish when
** the database connection is closed. Future versions of SQLite might
** make use of additional special filenames that begin with the ":" character.
** It is recommended that when a database filename actually does begin with
** a ":" character you should prefix the filename with a pathname such as
** "./" to avoid ambiguity.
**
-** If the filename is an empty string, then a private, temporary
-** on-disk database will be created. This private database will be
+** ^If the filename is an empty string, then a private, temporary
+** on-disk database will be created. ^This private database will be
** automatically deleted as soon as the database connection is closed.
**
-** The fourth parameter to sqlite3_open_v2() is the name of the
-** [sqlite3_vfs] object that defines the operating system interface that
-** the new database connection should use. If the fourth parameter is
-** a NULL pointer then the default [sqlite3_vfs] object is used.
+** [[URI filenames in sqlite3_open()]] <h3>URI Filenames</h3>
+**
+** ^If [URI filename] interpretation is enabled, and the filename argument
+** begins with "file:", then the filename is interpreted as a URI. ^URI
+** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
+** set in the third argument to sqlite3_open_v2(), or if it has
+** been enabled globally using the [SQLITE_CONFIG_URI] option with the
+** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
+** URI filename interpretation is turned off
+** by default, but future releases of SQLite might enable URI filename
+** interpretation by default. See "[URI filenames]" for additional
+** information.
+**
+** URI filenames are parsed according to RFC 3986. ^If the URI contains an
+** authority, then it must be either an empty string or the string
+** "localhost". ^If the authority is not an empty string or "localhost", an
+** error is returned to the caller. ^The fragment component of a URI, if
+** present, is ignored.
+**
+** ^SQLite uses the path component of the URI as the name of the disk file
+** which contains the database. ^If the path begins with a '/' character,
+** then it is interpreted as an absolute path. ^If the path does not begin
+** with a '/' (meaning that the authority section is omitted from the URI)
+** then the path is interpreted as a relative path.
+** ^(On windows, the first component of an absolute path
+** is a drive specification (e.g. "C:").)^
+**
+** [[core URI query parameters]]
+** The query component of a URI may contain parameters that are interpreted
+** either by SQLite itself, or by a [VFS | custom VFS implementation].
+** SQLite and its built-in [VFSes] interpret the
+** following query parameters:
+**
+** <ul>
+** <li> <b>vfs</b>: ^The "vfs" parameter may be used to specify the name of
+** a VFS object that provides the operating system interface that should
+** be used to access the database file on disk. ^If this option is set to
+** an empty string the default VFS object is used. ^Specifying an unknown
+** VFS is an error. ^If sqlite3_open_v2() is used and the vfs option is
+** present, then the VFS specified by the option takes precedence over
+** the value passed as the fourth parameter to sqlite3_open_v2().
+**
+** <li> <b>mode</b>: ^(The mode parameter may be set to either "ro", "rw",
+** "rwc", or "memory". Attempting to set it to any other value is
+** an error)^.
+** ^If "ro" is specified, then the database is opened for read-only
+** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the
+** third argument to sqlite3_open_v2(). ^If the mode option is set to
+** "rw", then the database is opened for read-write (but not create)
+** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had
+** been set. ^Value "rwc" is equivalent to setting both
+** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is
+** set to "memory" then a pure [in-memory database] that never reads
+** or writes from disk is used. ^It is an error to specify a value for
+** the mode parameter that is less restrictive than that specified by
+** the flags passed in the third parameter to sqlite3_open_v2().
+**
+** <li> <b>cache</b>: ^The cache parameter may be set to either "shared" or
+** "private". ^Setting it to "shared" is equivalent to setting the
+** SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to
+** sqlite3_open_v2(). ^Setting the cache parameter to "private" is
+** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit.
+** ^If sqlite3_open_v2() is used and the "cache" parameter is present in
+** a URI filename, its value overrides any behavior requested by setting
+** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.
+**
+** <li> <b>psow</b>: ^The psow parameter indicates whether or not the
+** [powersafe overwrite] property does or does not apply to the
+** storage media on which the database file resides.
+**
+** <li> <b>nolock</b>: ^The nolock parameter is a boolean query parameter
+** which if set disables file locking in rollback journal modes. This
+** is useful for accessing a database on a filesystem that does not
+** support locking. Caution: Database corruption might result if two
+** or more processes write to the same database and any one of those
+** processes uses nolock=1.
+**
+** <li> <b>immutable</b>: ^The immutable parameter is a boolean query
+** parameter that indicates that the database file is stored on
+** read-only media. ^When immutable is set, SQLite assumes that the
+** database file cannot be changed, even by a process with higher
+** privilege, and so the database is opened read-only and all locking
+** and change detection is disabled. Caution: Setting the immutable
+** property on a database file that does in fact change can result
+** in incorrect query results and/or [SQLITE_CORRUPT] errors.
+** See also: [SQLITE_IOCAP_IMMUTABLE].
+**
+** </ul>
+**
+** ^Specifying an unknown parameter in the query component of a URI is not an
+** error. Future versions of SQLite might understand additional query
+** parameters. See "[query parameters with special meaning to SQLite]" for
+** additional information.
+**
+** [[URI filename examples]] <h3>URI filename examples</h3>
+**
+** <table border="1" align=center cellpadding=5>
+** <tr><th> URI filenames <th> Results
+** <tr><td> file:data.db <td>
+** Open the file "data.db" in the current directory.
+** <tr><td> file:/home/fred/data.db<br>
+** file:///home/fred/data.db <br>
+** file://localhost/home/fred/data.db <br> <td>
+** Open the database file "/home/fred/data.db".
+** <tr><td> file://darkstar/home/fred/data.db <td>
+** An error. "darkstar" is not a recognized authority.
+** <tr><td style="white-space:nowrap">
+** file:///C:/Documents%20and%20Settings/fred/Desktop/data.db
+** <td> Windows only: Open the file "data.db" on fred's desktop on drive
+** C:. Note that the %20 escaping in this example is not strictly
+** necessary - space characters can be used literally
+** in URI filenames.
+** <tr><td> file:data.db?mode=ro&cache=private <td>
+** Open file "data.db" in the current directory for read-only access.
+** Regardless of whether or not shared-cache mode is enabled by
+** default, use a private cache.
+** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td>
+** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile"
+** that uses dot-files in place of posix advisory locking.
+** <tr><td> file:data.db?mode=readonly <td>
+** An error. "readonly" is not a valid option for the "mode" parameter.
+** </table>
+**
+** ^URI hexadecimal escape sequences (%HH) are supported within the path and
+** query components of a URI. A hexadecimal escape sequence consists of a
+** percent sign - "%" - followed by exactly two hexadecimal digits
+** specifying an octet value. ^Before the path or query components of a
+** URI filename are interpreted, they are encoded using UTF-8 and all
+** hexadecimal escape sequences replaced by a single byte containing the
+** corresponding octet. If this process generates an invalid UTF-8 encoding,
+** the results are undefined.
**
** <b>Note to Windows users:</b> The encoding used for the filename argument
** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever
** characters must be converted to UTF-8 prior to passing them into
** sqlite3_open() or sqlite3_open_v2().
**
-** INVARIANTS:
-**
-** {H12701} The [sqlite3_open()], [sqlite3_open16()], and
-** [sqlite3_open_v2()] interfaces create a new
-** [database connection] associated with
-** the database file given in their first parameter.
-**
-** {H12702} The filename argument is interpreted as UTF-8
-** for [sqlite3_open()] and [sqlite3_open_v2()] and as UTF-16
-** in the native byte order for [sqlite3_open16()].
-**
-** {H12703} A successful invocation of [sqlite3_open()], [sqlite3_open16()],
-** or [sqlite3_open_v2()] writes a pointer to a new
-** [database connection] into *ppDb.
-**
-** {H12704} The [sqlite3_open()], [sqlite3_open16()], and
-** [sqlite3_open_v2()] interfaces return [SQLITE_OK] upon success,
-** or an appropriate [error code] on failure.
-**
-** {H12706} The default text encoding for a new database created using
-** [sqlite3_open()] or [sqlite3_open_v2()] will be UTF-8.
-**
-** {H12707} The default text encoding for a new database created using
-** [sqlite3_open16()] will be UTF-16.
-**
-** {H12709} The [sqlite3_open(F,D)] interface is equivalent to
-** [sqlite3_open_v2(F,D,G,0)] where the G parameter is
-** [SQLITE_OPEN_READWRITE]|[SQLITE_OPEN_CREATE].
-**
-** {H12711} If the G parameter to [sqlite3_open_v2(F,D,G,V)] contains the
-** bit value [SQLITE_OPEN_READONLY] then the database is opened
-** for reading only.
-**
-** {H12712} If the G parameter to [sqlite3_open_v2(F,D,G,V)] contains the
-** bit value [SQLITE_OPEN_READWRITE] then the database is opened
-** reading and writing if possible, or for reading only if the
-** file is write protected by the operating system.
-**
-** {H12713} If the G parameter to [sqlite3_open_v2(F,D,G,V)] omits the
-** bit value [SQLITE_OPEN_CREATE] and the database does not
-** previously exist, an error is returned.
-**
-** {H12714} If the G parameter to [sqlite3_open_v2(F,D,G,V)] contains the
-** bit value [SQLITE_OPEN_CREATE] and the database does not
-** previously exist, then an attempt is made to create and
-** initialize the database.
+** <b>Note to Windows Runtime users:</b> The temporary directory must be set
+** prior to calling sqlite3_open() or sqlite3_open_v2(). Otherwise, various
+** features that require the use of temporary files may fail.
**
-** {H12717} If the filename argument to [sqlite3_open()], [sqlite3_open16()],
-** or [sqlite3_open_v2()] is ":memory:", then an private,
-** ephemeral, in-memory database is created for the connection.
-** <todo>Is SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE required
-** in sqlite3_open_v2()?</todo>
-**
-** {H12719} If the filename is NULL or an empty string, then a private,
-** ephemeral on-disk database will be created.
-** <todo>Is SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE required
-** in sqlite3_open_v2()?</todo>
-**
-** {H12721} The [database connection] created by [sqlite3_open_v2(F,D,G,V)]
-** will use the [sqlite3_vfs] object identified by the V parameter,
-** or the default [sqlite3_vfs] object if V is a NULL pointer.
-**
-** {H12723} Two [database connections] will share a common cache if both were
-** opened with the same VFS while [shared cache mode] was enabled and
-** if both filenames compare equal using memcmp() after having been
-** processed by the [sqlite3_vfs | xFullPathname] method of the VFS.
+** See also: [sqlite3_temp_directory]
*/
-int sqlite3_open(
+SQLITE_API int sqlite3_open(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb /* OUT: SQLite db handle */
);
-int sqlite3_open16(
+SQLITE_API int sqlite3_open16(
const void *filename, /* Database filename (UTF-16) */
sqlite3 **ppDb /* OUT: SQLite db handle */
);
-int sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
const char *filename, /* Database filename (UTF-8) */
sqlite3 **ppDb, /* OUT: SQLite db handle */
int flags, /* Flags */
);
/*
-** CAPI3REF: Error Codes And Messages {H12800} <S60200>
-**
-** The sqlite3_errcode() interface returns the numeric [result code] or
-** [extended result code] for the most recent failed sqlite3_* API call
-** associated with a [database connection]. If a prior API call failed
-** but the most recent API call succeeded, the return value from
-** sqlite3_errcode() is undefined.
-**
-** The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
+** CAPI3REF: Obtain Values For URI Parameters
+**
+** These are utility routines, useful to VFS implementations, that check
+** to see if a database file was a URI that contained a specific query
+** parameter, and if so obtains the value of that query parameter.
+**
+** If F is the database filename pointer passed into the xOpen() method of
+** a VFS implementation when the flags parameter to xOpen() has one or
+** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and
+** P is the name of the query parameter, then
+** sqlite3_uri_parameter(F,P) returns the value of the P
+** parameter if it exists or a NULL pointer if P does not appear as a
+** query parameter on F. If P is a query parameter of F
+** has no explicit value, then sqlite3_uri_parameter(F,P) returns
+** a pointer to an empty string.
+**
+** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean
+** parameter and returns true (1) or false (0) according to the value
+** of P. The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the
+** value of query parameter P is one of "yes", "true", or "on" in any
+** case or if the value begins with a non-zero number. The
+** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of
+** query parameter P is one of "no", "false", or "off" in any case or
+** if the value begins with a numeric zero. If P is not a query
+** parameter on F or if the value of P is does not match any of the
+** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0).
+**
+** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a
+** 64-bit signed integer and returns that integer, or D if P does not
+** exist. If the value of P is something other than an integer, then
+** zero is returned.
+**
+** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and
+** sqlite3_uri_boolean(F,P,B) returns B. If F is not a NULL pointer and
+** is not a database file pathname pointer that SQLite passed into the xOpen
+** VFS method, then the behavior of this routine is undefined and probably
+** undesirable.
+*/
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+
+
+/*
+** CAPI3REF: Error Codes And Messages
+** METHOD: sqlite3
+**
+** ^If the most recent sqlite3_* API call associated with
+** [database connection] D failed, then the sqlite3_errcode(D) interface
+** returns the numeric [result code] or [extended result code] for that
+** API call.
+** If the most recent API call was successful,
+** then the return value from sqlite3_errcode() is undefined.
+** ^The sqlite3_extended_errcode()
+** interface is the same except that it always returns the
+** [extended result code] even when extended result codes are
+** disabled.
+**
+** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
** text that describes the error, as either UTF-8 or UTF-16 respectively.
-** Memory to hold the error message string is managed internally.
+** ^(Memory to hold the error message string is managed internally.
** The application does not need to worry about freeing the result.
** However, the error string might be overwritten or deallocated by
-** subsequent calls to other SQLite interface functions.
+** subsequent calls to other SQLite interface functions.)^
+**
+** ^The sqlite3_errstr() interface returns the English-language text
+** that describes the [result code], as UTF-8.
+** ^(Memory to hold the error message string is managed internally
+** and must not be freed by the application)^.
+**
+** When the serialized [threading mode] is in use, it might be the
+** case that a second error occurs on a separate thread in between
+** the time of the first error and the call to these interfaces.
+** When that happens, the second error will be reported since these
+** interfaces always report the most recent result. To avoid
+** this, each thread can obtain exclusive use of the [database connection] D
+** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning
+** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after
+** all calls to the interfaces listed here are completed.
**
** If an interface fails with SQLITE_MISUSE, that means the interface
** was invoked incorrectly by the application. In that case, the
** error code and message may or may not be set.
-**
-** INVARIANTS:
-**
-** {H12801} The [sqlite3_errcode(D)] interface returns the numeric
-** [result code] or [extended result code] for the most recently
-** failed interface call associated with the [database connection] D.
-**
-** {H12803} The [sqlite3_errmsg(D)] and [sqlite3_errmsg16(D)]
-** interfaces return English-language text that describes
-** the error in the mostly recently failed interface call,
-** encoded as either UTF-8 or UTF-16 respectively.
-**
-** {H12807} The strings returned by [sqlite3_errmsg()] and [sqlite3_errmsg16()]
-** are valid until the next SQLite interface call.
-**
-** {H12808} Calls to API routines that do not return an error code
-** (example: [sqlite3_data_count()]) do not
-** change the error code or message returned by
-** [sqlite3_errcode()], [sqlite3_errmsg()], or [sqlite3_errmsg16()].
-**
-** {H12809} Interfaces that are not associated with a specific
-** [database connection] (examples:
-** [sqlite3_mprintf()] or [sqlite3_enable_shared_cache()]
-** do not change the values returned by
-** [sqlite3_errcode()], [sqlite3_errmsg()], or [sqlite3_errmsg16()].
*/
-int sqlite3_errcode(sqlite3 *db);
-const char *sqlite3_errmsg(sqlite3*);
-const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API int sqlite3_errcode(sqlite3 *db);
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
+SQLITE_API const char *sqlite3_errmsg(sqlite3*);
+SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API const char *sqlite3_errstr(int);
/*
-** CAPI3REF: SQL Statement Object {H13000} <H13010>
+** CAPI3REF: Prepared Statement Object
** KEYWORDS: {prepared statement} {prepared statements}
**
-** An instance of this object represents a single SQL statement.
-** This object is variously known as a "prepared statement" or a
-** "compiled SQL statement" or simply as a "statement".
+** An instance of this object represents a single SQL statement that
+** has been compiled into binary form and is ready to be evaluated.
+**
+** Think of each SQL statement as a separate computer program. The
+** original SQL text is source code. A prepared statement object
+** is the compiled object code. All SQL must be converted into a
+** prepared statement before it can be run.
**
-** The life of a statement object goes something like this:
+** The life-cycle of a prepared statement object usually goes like this:
**
** <ol>
-** <li> Create the object using [sqlite3_prepare_v2()] or a related
-** function.
-** <li> Bind values to [host parameters] using the sqlite3_bind_*()
+** <li> Create the prepared statement object using [sqlite3_prepare_v2()].
+** <li> Bind values to [parameters] using the sqlite3_bind_*()
** interfaces.
** <li> Run the SQL by calling [sqlite3_step()] one or more times.
-** <li> Reset the statement using [sqlite3_reset()] then go back
+** <li> Reset the prepared statement using [sqlite3_reset()] then go back
** to step 2. Do this zero or more times.
** <li> Destroy the object using [sqlite3_finalize()].
** </ol>
-**
-** Refer to documentation on individual methods above for additional
-** information.
*/
typedef struct sqlite3_stmt sqlite3_stmt;
/*
-** CAPI3REF: Run-time Limits {H12760} <S20600>
+** CAPI3REF: Run-time Limits
+** METHOD: sqlite3
**
-** This interface allows the size of various constructs to be limited
+** ^(This interface allows the size of various constructs to be limited
** on a connection by connection basis. The first parameter is the
** [database connection] whose limit is to be set or queried. The
** second parameter is one of the [limit categories] that define a
** class of constructs to be size limited. The third parameter is the
-** new limit for that construct. The function returns the old limit.
-**
-** If the new limit is a negative number, the limit is unchanged.
-** For the limit category of SQLITE_LIMIT_XYZ there is a hard upper
-** bound set by a compile-time C preprocessor macro named SQLITE_MAX_XYZ.
-** (The "_LIMIT_" in the name is changed to "_MAX_".)
-** Attempts to increase a limit above its hard upper bound are
-** silently truncated to the hard upper limit.
-**
-** Run time limits are intended for use in applications that manage
+** new limit for that construct.)^
+**
+** ^If the new limit is a negative number, the limit is unchanged.
+** ^(For each limit category SQLITE_LIMIT_<i>NAME</i> there is a
+** [limits | hard upper bound]
+** set at compile-time by a C preprocessor macro called
+** [limits | SQLITE_MAX_<i>NAME</i>].
+** (The "_LIMIT_" in the name is changed to "_MAX_".))^
+** ^Attempts to increase a limit above its hard upper bound are
+** silently truncated to the hard upper bound.
+**
+** ^Regardless of whether or not the limit was changed, the
+** [sqlite3_limit()] interface returns the prior value of the limit.
+** ^Hence, to find the current value of a limit without changing it,
+** simply invoke this interface with the third parameter set to -1.
+**
+** Run-time limits are intended for use in applications that manage
** both their own internal database and also databases that are controlled
** by untrusted external sources. An example application might be a
-** webbrowser that has its own databases for storing history and
+** web browser that has its own databases for storing history and
** separate databases controlled by JavaScript applications downloaded
** off the Internet. The internal databases can be given the
** large, default limits. Databases managed by external sources can
** [max_page_count] [PRAGMA].
**
** New run-time limit categories may be added in future releases.
-**
-** INVARIANTS:
-**
-** {H12762} A successful call to [sqlite3_limit(D,C,V)] where V is
-** positive changes the limit on the size of construct C in the
-** [database connection] D to the lesser of V and the hard upper
-** bound on the size of C that is set at compile-time.
-**
-** {H12766} A successful call to [sqlite3_limit(D,C,V)] where V is negative
-** leaves the state of the [database connection] D unchanged.
-**
-** {H12769} A successful call to [sqlite3_limit(D,C,V)] returns the
-** value of the limit on the size of construct C in the
-** [database connection] D as it was prior to the call.
*/
-int sqlite3_limit(sqlite3*, int id, int newVal);
+SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
/*
-** CAPI3REF: Run-Time Limit Categories {H12790} <H12760>
-** KEYWORDS: {limit category} {limit categories}
+** CAPI3REF: Run-Time Limit Categories
+** KEYWORDS: {limit category} {*limit categories}
**
-** These constants define various aspects of a [database connection]
-** that can be limited in size by calls to [sqlite3_limit()].
-** The meanings of the various limits are as follows:
+** These constants define various performance limits
+** that can be lowered at run-time using [sqlite3_limit()].
+** The synopsis of the meanings of the various limits is shown below.
+** Additional information is available at [limits | Limits in SQLite].
**
** <dl>
-** <dt>SQLITE_LIMIT_LENGTH</dt>
-** <dd>The maximum size of any string or BLOB or table row.<dd>
+** [[SQLITE_LIMIT_LENGTH]] ^(<dt>SQLITE_LIMIT_LENGTH</dt>
+** <dd>The maximum size of any string or BLOB or table row, in bytes.<dd>)^
**
-** <dt>SQLITE_LIMIT_SQL_LENGTH</dt>
-** <dd>The maximum length of an SQL statement.</dd>
+** [[SQLITE_LIMIT_SQL_LENGTH]] ^(<dt>SQLITE_LIMIT_SQL_LENGTH</dt>
+** <dd>The maximum length of an SQL statement, in bytes.</dd>)^
**
-** <dt>SQLITE_LIMIT_COLUMN</dt>
+** [[SQLITE_LIMIT_COLUMN]] ^(<dt>SQLITE_LIMIT_COLUMN</dt>
** <dd>The maximum number of columns in a table definition or in the
-** result set of a SELECT or the maximum number of columns in an index
-** or in an ORDER BY or GROUP BY clause.</dd>
+** result set of a [SELECT] or the maximum number of columns in an index
+** or in an ORDER BY or GROUP BY clause.</dd>)^
**
-** <dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
-** <dd>The maximum depth of the parse tree on any expression.</dd>
+** [[SQLITE_LIMIT_EXPR_DEPTH]] ^(<dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
+** <dd>The maximum depth of the parse tree on any expression.</dd>)^
**
-** <dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
-** <dd>The maximum number of terms in a compound SELECT statement.</dd>
+** [[SQLITE_LIMIT_COMPOUND_SELECT]] ^(<dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
+** <dd>The maximum number of terms in a compound SELECT statement.</dd>)^
**
-** <dt>SQLITE_LIMIT_VDBE_OP</dt>
+** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt>
** <dd>The maximum number of instructions in a virtual machine program
-** used to implement an SQL statement.</dd>
+** used to implement an SQL statement. If [sqlite3_prepare_v2()] or
+** the equivalent tries to allocate space for more than this many opcodes
+** in a single prepared statement, an SQLITE_NOMEM error is returned.</dd>)^
**
-** <dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
-** <dd>The maximum number of arguments on a function.</dd>
+** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
+** <dd>The maximum number of arguments on a function.</dd>)^
**
-** <dt>SQLITE_LIMIT_ATTACHED</dt>
-** <dd>The maximum number of attached databases.</dd>
+** [[SQLITE_LIMIT_ATTACHED]] ^(<dt>SQLITE_LIMIT_ATTACHED</dt>
+** <dd>The maximum number of [ATTACH | attached databases].)^</dd>
**
-** <dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt>
-** <dd>The maximum length of the pattern argument to the LIKE or
-** GLOB operators.</dd>
+** [[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]]
+** ^(<dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt>
+** <dd>The maximum length of the pattern argument to the [LIKE] or
+** [GLOB] operators.</dd>)^
**
-** <dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt>
-** <dd>The maximum number of variables in an SQL statement that can
-** be bound.</dd>
+** [[SQLITE_LIMIT_VARIABLE_NUMBER]]
+** ^(<dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt>
+** <dd>The maximum index number of any [parameter] in an SQL statement.)^
+**
+** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>
+** <dd>The maximum depth of recursion for triggers.</dd>)^
+**
+** [[SQLITE_LIMIT_WORKER_THREADS]] ^(<dt>SQLITE_LIMIT_WORKER_THREADS</dt>
+** <dd>The maximum number of auxiliary worker threads that a single
+** [prepared statement] may start.</dd>)^
** </dl>
*/
#define SQLITE_LIMIT_LENGTH 0
#define SQLITE_LIMIT_ATTACHED 7
#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8
#define SQLITE_LIMIT_VARIABLE_NUMBER 9
+#define SQLITE_LIMIT_TRIGGER_DEPTH 10
+#define SQLITE_LIMIT_WORKER_THREADS 11
+
+/*
+** CAPI3REF: Prepare Flags
+**
+** These constants define various flags that can be passed into
+** "prepFlags" parameter of the [sqlite3_prepare_v3()] and
+** [sqlite3_prepare16_v3()] interfaces.
+**
+** New flags may be added in future releases of SQLite.
+**
+** <dl>
+** [[SQLITE_PREPARE_PERSISTENT]] ^(<dt>SQLITE_PREPARE_PERSISTENT</dt>
+** <dd>The SQLITE_PREPARE_PERSISTENT flag is a hint to the query planner
+** that the prepared statement will be retained for a long time and
+** probably reused many times.)^ ^Without this flag, [sqlite3_prepare_v3()]
+** and [sqlite3_prepare16_v3()] assume that the prepared statement will
+** be used just once or at most a few times and then destroyed using
+** [sqlite3_finalize()] relatively soon. The current implementation acts
+** on this hint by avoiding the use of [lookaside memory] so as not to
+** deplete the limited store of lookaside memory. Future versions of
+** SQLite may act on this hint differently.
+** </dl>
+*/
+#define SQLITE_PREPARE_PERSISTENT 0x01
/*
-** CAPI3REF: Compiling An SQL Statement {H13010} <S10000>
+** CAPI3REF: Compiling An SQL Statement
** KEYWORDS: {SQL statement compiler}
+** METHOD: sqlite3
+** CONSTRUCTOR: sqlite3_stmt
+**
+** To execute an SQL statement, it must first be compiled into a byte-code
+** program using one of these routines. Or, in other words, these routines
+** are constructors for the [prepared statement] object.
+**
+** The preferred routine to use is [sqlite3_prepare_v2()]. The
+** [sqlite3_prepare()] interface is legacy and should be avoided.
+** [sqlite3_prepare_v3()] has an extra "prepFlags" option that is used
+** for special purposes.
**
-** To execute an SQL query, it must first be compiled into a byte-code
-** program using one of these routines.
+** The use of the UTF-8 interfaces is preferred, as SQLite currently
+** does all parsing using UTF-8. The UTF-16 interfaces are provided
+** as a convenience. The UTF-16 interfaces work by converting the
+** input text into UTF-8, then invoking the corresponding UTF-8 interface.
**
** The first argument, "db", is a [database connection] obtained from a
-** prior call to [sqlite3_open()], [sqlite3_open_v2()] or [sqlite3_open16()].
+** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or
+** [sqlite3_open16()]. The database connection must not have been closed.
**
** The second argument, "zSql", is the statement to be compiled, encoded
-** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2()
-** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
-** use UTF-16.
-**
-** If the nByte argument is less than zero, then zSql is read up to the
-** first zero terminator. If nByte is non-negative, then it is the maximum
-** number of bytes read from zSql. When nByte is non-negative, the
-** zSql string ends at either the first '\000' or '\u0000' character or
-** the nByte-th byte, whichever comes first. If the caller knows
-** that the supplied string is nul-terminated, then there is a small
-** performance advantage to be gained by passing an nByte parameter that
-** is equal to the number of bytes in the input string <i>including</i>
-** the nul-terminator bytes.
-**
-** *pzTail is made to point to the first byte past the end of the
-** first SQL statement in zSql. These routines only compile the first
-** statement in zSql, so *pzTail is left pointing to what remains
-** uncompiled.
-**
-** *ppStmt is left pointing to a compiled [prepared statement] that can be
-** executed using [sqlite3_step()]. If there is an error, *ppStmt is set
-** to NULL. If the input text contains no SQL (if the input is an empty
+** as either UTF-8 or UTF-16. The sqlite3_prepare(), sqlite3_prepare_v2(),
+** and sqlite3_prepare_v3()
+** interfaces use UTF-8, and sqlite3_prepare16(), sqlite3_prepare16_v2(),
+** and sqlite3_prepare16_v3() use UTF-16.
+**
+** ^If the nByte argument is negative, then zSql is read up to the
+** first zero terminator. ^If nByte is positive, then it is the
+** number of bytes read from zSql. ^If nByte is zero, then no prepared
+** statement is generated.
+** If the caller knows that the supplied string is nul-terminated, then
+** there is a small performance advantage to passing an nByte parameter that
+** is the number of bytes in the input string <i>including</i>
+** the nul-terminator.
+**
+** ^If pzTail is not NULL then *pzTail is made to point to the first byte
+** past the end of the first SQL statement in zSql. These routines only
+** compile the first statement in zSql, so *pzTail is left pointing to
+** what remains uncompiled.
+**
+** ^*ppStmt is left pointing to a compiled [prepared statement] that can be
+** executed using [sqlite3_step()]. ^If there is an error, *ppStmt is set
+** to NULL. ^If the input text contains no SQL (if the input is an empty
** string or a comment) then *ppStmt is set to NULL.
-** {A13018} The calling procedure is responsible for deleting the compiled
+** The calling procedure is responsible for deleting the compiled
** SQL statement using [sqlite3_finalize()] after it has finished with it.
+** ppStmt may not be NULL.
**
-** On success, [SQLITE_OK] is returned, otherwise an [error code] is returned.
+** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK];
+** otherwise an [error code] is returned.
**
-** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
-** recommended for all new programs. The two older interfaces are retained
-** for backwards compatibility, but their use is discouraged.
-** In the "v2" interfaces, the prepared statement
+** The sqlite3_prepare_v2(), sqlite3_prepare_v3(), sqlite3_prepare16_v2(),
+** and sqlite3_prepare16_v3() interfaces are recommended for all new programs.
+** The older interfaces (sqlite3_prepare() and sqlite3_prepare16())
+** are retained for backwards compatibility, but their use is discouraged.
+** ^In the "vX" interfaces, the prepared statement
** that is returned (the [sqlite3_stmt] object) contains a copy of the
** original SQL text. This causes the [sqlite3_step()] interface to
-** behave a differently in two ways:
+** behave differently in three ways:
**
** <ol>
** <li>
-** If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
+** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
** always used to do, [sqlite3_step()] will automatically recompile the SQL
-** statement and try to run it again. If the schema has changed in
-** a way that makes the statement no longer valid, [sqlite3_step()] will still
-** return [SQLITE_SCHEMA]. But unlike the legacy behavior, [SQLITE_SCHEMA] is
-** now a fatal error. Calling [sqlite3_prepare_v2()] again will not make the
-** error go away. Note: use [sqlite3_errmsg()] to find the text
-** of the parsing error that results in an [SQLITE_SCHEMA] return.
+** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY]
+** retries will occur before sqlite3_step() gives up and returns an error.
** </li>
**
** <li>
-** When an error occurs, [sqlite3_step()] will return one of the detailed
-** [error codes] or [extended error codes]. The legacy behavior was that
+** ^When an error occurs, [sqlite3_step()] will return one of the detailed
+** [error codes] or [extended error codes]. ^The legacy behavior was that
** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code
-** and you would have to make a second call to [sqlite3_reset()] in order
-** to find the underlying cause of the problem. With the "v2" prepare
+** and the application would have to make a second call to [sqlite3_reset()]
+** in order to find the underlying cause of the problem. With the "v2" prepare
** interfaces, the underlying reason for the error is returned immediately.
** </li>
-** </ol>
-**
-** INVARIANTS:
-**
-** {H13011} The [sqlite3_prepare(db,zSql,...)] and
-** [sqlite3_prepare_v2(db,zSql,...)] interfaces interpret the
-** text in their zSql parameter as UTF-8.
-**
-** {H13012} The [sqlite3_prepare16(db,zSql,...)] and
-** [sqlite3_prepare16_v2(db,zSql,...)] interfaces interpret the
-** text in their zSql parameter as UTF-16 in the native byte order.
-**
-** {H13013} If the nByte argument to [sqlite3_prepare_v2(db,zSql,nByte,...)]
-** and its variants is less than zero, the SQL text is
-** read from zSql is read up to the first zero terminator.
-**
-** {H13014} If the nByte argument to [sqlite3_prepare_v2(db,zSql,nByte,...)]
-** and its variants is non-negative, then at most nBytes bytes of
-** SQL text is read from zSql.
-**
-** {H13015} In [sqlite3_prepare_v2(db,zSql,N,P,pzTail)] and its variants
-** if the zSql input text contains more than one SQL statement
-** and pzTail is not NULL, then *pzTail is made to point to the
-** first byte past the end of the first SQL statement in zSql.
-** <todo>What does *pzTail point to if there is one statement?</todo>
-**
-** {H13016} A successful call to [sqlite3_prepare_v2(db,zSql,N,ppStmt,...)]
-** or one of its variants writes into *ppStmt a pointer to a new
-** [prepared statement] or a pointer to NULL if zSql contains
-** nothing other than whitespace or comments.
**
-** {H13019} The [sqlite3_prepare_v2()] interface and its variants return
-** [SQLITE_OK] or an appropriate [error code] upon failure.
+** <li>
+** ^If the specific value bound to [parameter | host parameter] in the
+** WHERE clause might influence the choice of query plan for a statement,
+** then the statement will be automatically recompiled, as if there had been
+** a schema change, on the first [sqlite3_step()] call following any change
+** to the [sqlite3_bind_text | bindings] of that [parameter].
+** ^The specific value of WHERE-clause [parameter] might influence the
+** choice of query plan if the parameter is the left-hand side of a [LIKE]
+** or [GLOB] operator or if the parameter is compared to an indexed column
+** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
+** </li>
**
-** {H13021} Before [sqlite3_prepare(db,zSql,nByte,ppStmt,pzTail)] or its
-** variants returns an error (any value other than [SQLITE_OK]),
-** they first set *ppStmt to NULL.
+** <p>^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having
+** the extra prepFlags parameter, which is a bit array consisting of zero or
+** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags. ^The
+** sqlite3_prepare_v2() interface works exactly the same as
+** sqlite3_prepare_v3() with a zero prepFlags parameter.
+** </ol>
*/
-int sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
+ sqlite3 *db, /* Database handle */
+ const char *zSql, /* SQL statement, UTF-8 encoded */
+ int nByte, /* Maximum length of zSql in bytes. */
+ sqlite3_stmt **ppStmt, /* OUT: Statement handle */
+ const char **pzTail /* OUT: Pointer to unused portion of zSql */
+);
+SQLITE_API int sqlite3_prepare_v2(
sqlite3 *db, /* Database handle */
const char *zSql, /* SQL statement, UTF-8 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
-int sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v3(
sqlite3 *db, /* Database handle */
const char *zSql, /* SQL statement, UTF-8 encoded */
int nByte, /* Maximum length of zSql in bytes. */
+ unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_ flags */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const char **pzTail /* OUT: Pointer to unused portion of zSql */
);
-int sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare16(
+ sqlite3 *db, /* Database handle */
+ const void *zSql, /* SQL statement, UTF-16 encoded */
+ int nByte, /* Maximum length of zSql in bytes. */
+ sqlite3_stmt **ppStmt, /* OUT: Statement handle */
+ const void **pzTail /* OUT: Pointer to unused portion of zSql */
+);
+SQLITE_API int sqlite3_prepare16_v2(
sqlite3 *db, /* Database handle */
const void *zSql, /* SQL statement, UTF-16 encoded */
int nByte, /* Maximum length of zSql in bytes. */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const void **pzTail /* OUT: Pointer to unused portion of zSql */
);
-int sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v3(
sqlite3 *db, /* Database handle */
const void *zSql, /* SQL statement, UTF-16 encoded */
int nByte, /* Maximum length of zSql in bytes. */
+ unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_ flags */
sqlite3_stmt **ppStmt, /* OUT: Statement handle */
const void **pzTail /* OUT: Pointer to unused portion of zSql */
);
/*
-** CAPIREF: Retrieving Statement SQL {H13100} <H13000>
+** CAPI3REF: Retrieving Statement SQL
+** METHOD: sqlite3_stmt
+**
+** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8
+** SQL text used to create [prepared statement] P if P was
+** created by [sqlite3_prepare_v2()], [sqlite3_prepare_v3()],
+** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()].
+** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8
+** string containing the SQL text of prepared statement P with
+** [bound parameters] expanded.
+**
+** ^(For example, if a prepared statement is created using the SQL
+** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345
+** and parameter :xyz is unbound, then sqlite3_sql() will return
+** the original string, "SELECT $abc,:xyz" but sqlite3_expanded_sql()
+** will return "SELECT 2345,NULL".)^
+**
+** ^The sqlite3_expanded_sql() interface returns NULL if insufficient memory
+** is available to hold the result, or if the result would exceed the
+** the maximum string length determined by the [SQLITE_LIMIT_LENGTH].
+**
+** ^The [SQLITE_TRACE_SIZE_LIMIT] compile-time option limits the size of
+** bound parameter expansions. ^The [SQLITE_OMIT_TRACE] compile-time
+** option causes sqlite3_expanded_sql() to always return NULL.
+**
+** ^The string returned by sqlite3_sql(P) is managed by SQLite and is
+** automatically freed when the prepared statement is finalized.
+** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
+** is obtained from [sqlite3_malloc()] and must be free by the application
+** by passing it to [sqlite3_free()].
+*/
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
+
+/*
+** CAPI3REF: Determine If An SQL Statement Writes The Database
+** METHOD: sqlite3_stmt
+**
+** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if
+** and only if the [prepared statement] X makes no direct changes to
+** the content of the database file.
**
-** This interface can be used to retrieve a saved copy of the original
-** SQL text used to create a [prepared statement] if that statement was
-** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
+** Note that [application-defined SQL functions] or
+** [virtual tables] might change the database indirectly as a side effect.
+** ^(For example, if an application defines a function "eval()" that
+** calls [sqlite3_exec()], then the following SQL statement would
+** change the database file through side-effects:
**
-** INVARIANTS:
+** <blockquote><pre>
+** SELECT eval('DELETE FROM t1') FROM t2;
+** </pre></blockquote>
**
-** {H13101} If the [prepared statement] passed as the argument to
-** [sqlite3_sql()] was compiled using either [sqlite3_prepare_v2()] or
-** [sqlite3_prepare16_v2()], then [sqlite3_sql()] returns
-** a pointer to a zero-terminated string containing a UTF-8 rendering
-** of the original SQL statement.
+** But because the [SELECT] statement does not change the database file
+** directly, sqlite3_stmt_readonly() would still return true.)^
+**
+** ^Transaction control statements such as [BEGIN], [COMMIT], [ROLLBACK],
+** [SAVEPOINT], and [RELEASE] cause sqlite3_stmt_readonly() to return true,
+** since the statements themselves do not actually modify the database but
+** rather they control the timing of when other statements modify the
+** database. ^The [ATTACH] and [DETACH] statements also cause
+** sqlite3_stmt_readonly() to return true since, while those statements
+** change the configuration of a database connection, they do not make
+** changes to the content of the database files on disk.
+** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since
+** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and
+** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so
+** sqlite3_stmt_readonly() returns false for those commands.
+*/
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
+
+/*
+** CAPI3REF: Determine If A Prepared Statement Has Been Reset
+** METHOD: sqlite3_stmt
**
-** {H13102} If the [prepared statement] passed as the argument to
-** [sqlite3_sql()] was compiled using either [sqlite3_prepare()] or
-** [sqlite3_prepare16()], then [sqlite3_sql()] returns a NULL pointer.
+** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
+** [prepared statement] S has been stepped at least once using
+** [sqlite3_step(S)] but has neither run to completion (returned
+** [SQLITE_DONE] from [sqlite3_step(S)]) nor
+** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S)
+** interface returns false if S is a NULL pointer. If S is not a
+** NULL pointer and is not a pointer to a valid [prepared statement]
+** object, then the behavior is undefined and probably undesirable.
**
-** {H13103} The string returned by [sqlite3_sql(S)] is valid until the
-** [prepared statement] S is deleted using [sqlite3_finalize(S)].
+** This interface can be used in combination [sqlite3_next_stmt()]
+** to locate all prepared statements associated with a database
+** connection that are in need of being reset. This can be used,
+** for example, in diagnostic routines to search for prepared
+** statements that are holding a transaction open.
*/
-const char *sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
/*
-** CAPI3REF: Dynamically Typed Value Object {H15000} <S20200>
+** CAPI3REF: Dynamically Typed Value Object
** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value}
**
** SQLite uses the sqlite3_value object to represent all values
** that can be stored in a database table. SQLite uses dynamic typing
-** for the values it stores. Values stored in sqlite3_value objects
+** for the values it stores. ^Values stored in sqlite3_value objects
** can be integers, floating point values, strings, BLOBs, or NULL.
**
** An sqlite3_value object may be either "protected" or "unprotected".
** Some interfaces require a protected sqlite3_value. Other interfaces
** will accept either a protected or an unprotected sqlite3_value.
** Every interface that accepts sqlite3_value arguments specifies
-** whether or not it requires a protected sqlite3_value.
+** whether or not it requires a protected sqlite3_value. The
+** [sqlite3_value_dup()] interface can be used to construct a new
+** protected sqlite3_value from an unprotected sqlite3_value.
**
** The terms "protected" and "unprotected" refer to whether or not
-** a mutex is held. A internal mutex is held for a protected
+** a mutex is held. An internal mutex is held for a protected
** sqlite3_value object but no mutex is held for an unprotected
** sqlite3_value object. If SQLite is compiled to be single-threaded
** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0)
** then there is no distinction between protected and unprotected
** sqlite3_value objects and they can be used interchangeably. However,
** for maximum code portability it is recommended that applications
-** still make the distinction between between protected and unprotected
+** still make the distinction between protected and unprotected
** sqlite3_value objects even when not strictly required.
**
-** The sqlite3_value objects that are passed as parameters into the
+** ^The sqlite3_value objects that are passed as parameters into the
** implementation of [application-defined SQL functions] are protected.
-** The sqlite3_value object returned by
+** ^The sqlite3_value object returned by
** [sqlite3_column_value()] is unprotected.
-** Unprotected sqlite3_value objects may only be used with
-** [sqlite3_result_value()] and [sqlite3_bind_value()].
+** Unprotected sqlite3_value objects may only be used as arguments
+** to [sqlite3_result_value()], [sqlite3_bind_value()], and
+** [sqlite3_value_dup()].
** The [sqlite3_value_blob | sqlite3_value_type()] family of
** interfaces require protected sqlite3_value objects.
*/
-typedef struct Mem sqlite3_value;
+typedef struct sqlite3_value sqlite3_value;
/*
-** CAPI3REF: SQL Function Context Object {H16001} <S20200>
+** CAPI3REF: SQL Function Context Object
**
** The context in which an SQL function executes is stored in an
-** sqlite3_context object. A pointer to an sqlite3_context object
+** sqlite3_context object. ^A pointer to an sqlite3_context object
** is always first parameter to [application-defined SQL functions].
** The application-defined SQL function implementation will pass this
** pointer through into calls to [sqlite3_result_int | sqlite3_result()],
typedef struct sqlite3_context sqlite3_context;
/*
-** CAPI3REF: Binding Values To Prepared Statements {H13500} <S70300>
+** CAPI3REF: Binding Values To Prepared Statements
** KEYWORDS: {host parameter} {host parameters} {host parameter name}
** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding}
+** METHOD: sqlite3_stmt
**
-** In the SQL strings input to [sqlite3_prepare_v2()] and its variants,
-** literals may be replaced by a parameter in one of these forms:
+** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants,
+** literals may be replaced by a [parameter] that matches one of following
+** templates:
**
** <ul>
** <li> ?
** <li> $VVV
** </ul>
**
-** In the parameter forms shown above NNN is an integer literal,
-** and VVV is an alpha-numeric parameter name. The values of these
+** In the templates above, NNN represents an integer literal,
+** and VVV represents an alphanumeric identifier.)^ ^The values of these
** parameters (also called "host parameter names" or "SQL parameters")
** can be set using the sqlite3_bind_*() routines defined here.
**
-** The first argument to the sqlite3_bind_*() routines is always
+** ^The first argument to the sqlite3_bind_*() routines is always
** a pointer to the [sqlite3_stmt] object returned from
** [sqlite3_prepare_v2()] or its variants.
**
-** The second argument is the index of the SQL parameter to be set.
-** The leftmost SQL parameter has an index of 1. When the same named
+** ^The second argument is the index of the SQL parameter to be set.
+** ^The leftmost SQL parameter has an index of 1. ^When the same named
** SQL parameter is used more than once, second and subsequent
** occurrences have the same index as the first occurrence.
-** The index for named parameters can be looked up using the
-** [sqlite3_bind_parameter_index()] API if desired. The index
+** ^The index for named parameters can be looked up using the
+** [sqlite3_bind_parameter_index()] API if desired. ^The index
** for "?NNN" parameters is the value of NNN.
-** The NNN value must be between 1 and the [sqlite3_limit()]
+** ^The NNN value must be between 1 and the [sqlite3_limit()]
** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).
**
-** The third argument is the value to bind to the parameter.
+** ^The third argument is the value to bind to the parameter.
+** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16()
+** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter
+** is ignored and the end result is the same as sqlite3_bind_null().
**
-** In those routines that have a fourth argument, its value is the
+** ^(In those routines that have a fourth argument, its value is the
** number of bytes in the parameter. To be clear: the value is the
-** number of <u>bytes</u> in the value, not the number of characters.
-** If the fourth parameter is negative, the length of the string is
+** number of <u>bytes</u> in the value, not the number of characters.)^
+** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16()
+** is negative, then the length of the string is
** the number of bytes up to the first zero terminator.
-**
-** The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and
-** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or
-** string after SQLite has finished with it. If the fifth argument is
+** If the fourth parameter to sqlite3_bind_blob() is negative, then
+** the behavior is undefined.
+** If a non-negative fourth parameter is provided to sqlite3_bind_text()
+** or sqlite3_bind_text16() or sqlite3_bind_text64() then
+** that parameter must be the byte offset
+** where the NUL terminator would occur assuming the string were NUL
+** terminated. If any NUL characters occur at byte offsets less than
+** the value of the fourth parameter then the resulting string value will
+** contain embedded NULs. The result of expressions involving strings
+** with embedded NULs is undefined.
+**
+** ^The fifth argument to the BLOB and string binding interfaces
+** is a destructor used to dispose of the BLOB or
+** string after SQLite has finished with it. ^The destructor is called
+** to dispose of the BLOB or string even if the call to bind API fails.
+** ^If the fifth argument is
** the special value [SQLITE_STATIC], then SQLite assumes that the
** information is in static, unmanaged space and does not need to be freed.
-** If the fifth argument has the value [SQLITE_TRANSIENT], then
+** ^If the fifth argument has the value [SQLITE_TRANSIENT], then
** SQLite makes its own private copy of the data immediately, before
** the sqlite3_bind_*() routine returns.
**
-** The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
-** is filled with zeroes. A zeroblob uses a fixed amount of memory
+** ^The sixth argument to sqlite3_bind_text64() must be one of
+** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]
+** to specify the encoding of the text in the third parameter. If
+** the sixth argument to sqlite3_bind_text64() is not one of the
+** allowed values shown above, or if the text encoding is different
+** from the encoding specified by the sixth parameter, then the behavior
+** is undefined.
+**
+** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
+** is filled with zeroes. ^A zeroblob uses a fixed amount of memory
** (just an integer to hold its size) while it is being processed.
** Zeroblobs are intended to serve as placeholders for BLOBs whose
** content is later written using
** [sqlite3_blob_open | incremental BLOB I/O] routines.
-** A negative value for the zeroblob results in a zero-length BLOB.
-**
-** The sqlite3_bind_*() routines must be called after
-** [sqlite3_prepare_v2()] (and its variants) or [sqlite3_reset()] and
-** before [sqlite3_step()].
-** Bindings are not cleared by the [sqlite3_reset()] routine.
-** Unbound parameters are interpreted as NULL.
-**
-** These routines return [SQLITE_OK] on success or an error code if
-** anything goes wrong. [SQLITE_RANGE] is returned if the parameter
-** index is out of range. [SQLITE_NOMEM] is returned if malloc() fails.
-** [SQLITE_MISUSE] might be returned if these routines are called on a
-** virtual machine that is the wrong state or which has already been finalized.
-** Detection of misuse is unreliable. Applications should not depend
-** on SQLITE_MISUSE returns. SQLITE_MISUSE is intended to indicate a
-** a logic error in the application. Future versions of SQLite might
-** panic rather than return SQLITE_MISUSE.
+** ^A negative value for the zeroblob results in a zero-length BLOB.
+**
+** ^The sqlite3_bind_pointer(S,I,P,T,D) routine causes the I-th parameter in
+** [prepared statement] S to have an SQL value of NULL, but to also be
+** associated with the pointer P of type T. ^D is either a NULL pointer or
+** a pointer to a destructor function for P. ^SQLite will invoke the
+** destructor D with a single argument of P when it is finished using
+** P. The T parameter should be a static string, preferably a string
+** literal. The sqlite3_bind_pointer() routine is part of the
+** [pointer passing interface] added for SQLite 3.20.0.
+**
+** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer
+** for the [prepared statement] or with a prepared statement for which
+** [sqlite3_step()] has been called more recently than [sqlite3_reset()],
+** then the call will return [SQLITE_MISUSE]. If any sqlite3_bind_()
+** routine is passed a [prepared statement] that has been finalized, the
+** result is undefined and probably harmful.
+**
+** ^Bindings are not cleared by the [sqlite3_reset()] routine.
+** ^Unbound parameters are interpreted as NULL.
+**
+** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an
+** [error code] if anything goes wrong.
+** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB
+** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or
+** [SQLITE_MAX_LENGTH].
+** ^[SQLITE_RANGE] is returned if the parameter
+** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails.
**
** See also: [sqlite3_bind_parameter_count()],
** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
-**
-** INVARIANTS:
-**
-** {H13506} The [SQL statement compiler] recognizes tokens of the forms
-** "?", "?NNN", "$VVV", ":VVV", and "@VVV" as SQL parameters,
-** where NNN is any sequence of one or more digits
-** and where VVV is any sequence of one or more alphanumeric
-** characters or "::" optionally followed by a string containing
-** no spaces and contained within parentheses.
-**
-** {H13509} The initial value of an SQL parameter is NULL.
-**
-** {H13512} The index of an "?" SQL parameter is one larger than the
-** largest index of SQL parameter to the left, or 1 if
-** the "?" is the leftmost SQL parameter.
-**
-** {H13515} The index of an "?NNN" SQL parameter is the integer NNN.
-**
-** {H13518} The index of an ":VVV", "$VVV", or "@VVV" SQL parameter is
-** the same as the index of leftmost occurrences of the same
-** parameter, or one more than the largest index over all
-** parameters to the left if this is the first occurrence
-** of this parameter, or 1 if this is the leftmost parameter.
-**
-** {H13521} The [SQL statement compiler] fails with an [SQLITE_RANGE]
-** error if the index of an SQL parameter is less than 1
-** or greater than the compile-time SQLITE_MAX_VARIABLE_NUMBER
-** parameter.
-**
-** {H13524} Calls to [sqlite3_bind_text | sqlite3_bind(S,N,V,...)]
-** associate the value V with all SQL parameters having an
-** index of N in the [prepared statement] S.
-**
-** {H13527} Calls to [sqlite3_bind_text | sqlite3_bind(S,N,...)]
-** override prior calls with the same values of S and N.
-**
-** {H13530} Bindings established by [sqlite3_bind_text | sqlite3_bind(S,...)]
-** persist across calls to [sqlite3_reset(S)].
-**
-** {H13533} In calls to [sqlite3_bind_blob(S,N,V,L,D)],
-** [sqlite3_bind_text(S,N,V,L,D)], or
-** [sqlite3_bind_text16(S,N,V,L,D)] SQLite binds the first L
-** bytes of the BLOB or string pointed to by V, when L
-** is non-negative.
-**
-** {H13536} In calls to [sqlite3_bind_text(S,N,V,L,D)] or
-** [sqlite3_bind_text16(S,N,V,L,D)] SQLite binds characters
-** from V through the first zero character when L is negative.
-**
-** {H13539} In calls to [sqlite3_bind_blob(S,N,V,L,D)],
-** [sqlite3_bind_text(S,N,V,L,D)], or
-** [sqlite3_bind_text16(S,N,V,L,D)] when D is the special
-** constant [SQLITE_STATIC], SQLite assumes that the value V
-** is held in static unmanaged space that will not change
-** during the lifetime of the binding.
-**
-** {H13542} In calls to [sqlite3_bind_blob(S,N,V,L,D)],
-** [sqlite3_bind_text(S,N,V,L,D)], or
-** [sqlite3_bind_text16(S,N,V,L,D)] when D is the special
-** constant [SQLITE_TRANSIENT], the routine makes a
-** private copy of the value V before it returns.
-**
-** {H13545} In calls to [sqlite3_bind_blob(S,N,V,L,D)],
-** [sqlite3_bind_text(S,N,V,L,D)], or
-** [sqlite3_bind_text16(S,N,V,L,D)] when D is a pointer to
-** a function, SQLite invokes that function to destroy the
-** value V after it has finished using the value V.
-**
-** {H13548} In calls to [sqlite3_bind_zeroblob(S,N,V,L)] the value bound
-** is a BLOB of L bytes, or a zero-length BLOB if L is negative.
-**
-** {H13551} In calls to [sqlite3_bind_value(S,N,V)] the V argument may
-** be either a [protected sqlite3_value] object or an
-** [unprotected sqlite3_value] object.
-*/
-int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-int sqlite3_bind_double(sqlite3_stmt*, int, double);
-int sqlite3_bind_int(sqlite3_stmt*, int, int);
-int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-int sqlite3_bind_null(sqlite3_stmt*, int);
-int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*));
-int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-
-/*
-** CAPI3REF: Number Of SQL Parameters {H13600} <S70300>
-**
-** This routine can be used to find the number of [SQL parameters]
+*/
+SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
+ void(*)(void*));
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
+SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
+SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
+SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
+ void(*)(void*), unsigned char encoding);
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
+SQLITE_API int sqlite3_bind_pointer(sqlite3_stmt*, int, void*, const char*,void(*)(void*));
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
+
+/*
+** CAPI3REF: Number Of SQL Parameters
+** METHOD: sqlite3_stmt
+**
+** ^This routine can be used to find the number of [SQL parameters]
** in a [prepared statement]. SQL parameters are tokens of the
** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as
** placeholders for values that are [sqlite3_bind_blob | bound]
** to the parameters at a later time.
**
-** This routine actually returns the index of the largest (rightmost)
+** ^(This routine actually returns the index of the largest (rightmost)
** parameter. For all forms except ?NNN, this will correspond to the
-** number of unique parameters. If parameters of the ?NNN are used,
-** there may be gaps in the list.
+** number of unique parameters. If parameters of the ?NNN form are used,
+** there may be gaps in the list.)^
**
** See also: [sqlite3_bind_blob|sqlite3_bind()],
** [sqlite3_bind_parameter_name()], and
** [sqlite3_bind_parameter_index()].
-**
-** INVARIANTS:
-**
-** {H13601} The [sqlite3_bind_parameter_count(S)] interface returns
-** the largest index of all SQL parameters in the
-** [prepared statement] S, or 0 if S contains no SQL parameters.
*/
-int sqlite3_bind_parameter_count(sqlite3_stmt*);
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
/*
-** CAPI3REF: Name Of A Host Parameter {H13620} <S70300>
+** CAPI3REF: Name Of A Host Parameter
+** METHOD: sqlite3_stmt
**
-** This routine returns a pointer to the name of the n-th
-** [SQL parameter] in a [prepared statement].
-** SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
+** ^The sqlite3_bind_parameter_name(P,N) interface returns
+** the name of the N-th [SQL parameter] in the [prepared statement] P.
+** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA"
** respectively.
** In other words, the initial ":" or "$" or "@" or "?"
-** is included as part of the name.
-** Parameters of the form "?" without a following integer have no name
-** and are also referred to as "anonymous parameters".
+** is included as part of the name.)^
+** ^Parameters of the form "?" without a following integer have no name
+** and are referred to as "nameless" or "anonymous parameters".
**
-** The first host parameter has an index of 1, not 0.
+** ^The first host parameter has an index of 1, not 0.
**
-** If the value n is out of range or if the n-th parameter is
-** nameless, then NULL is returned. The returned string is
+** ^If the value N is out of range or if the N-th parameter is
+** nameless, then NULL is returned. ^The returned string is
** always in UTF-8 encoding even if the named parameter was
-** originally specified as UTF-16 in [sqlite3_prepare16()] or
-** [sqlite3_prepare16_v2()].
+** originally specified as UTF-16 in [sqlite3_prepare16()],
+** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()].
**
** See also: [sqlite3_bind_blob|sqlite3_bind()],
** [sqlite3_bind_parameter_count()], and
** [sqlite3_bind_parameter_index()].
-**
-** INVARIANTS:
-**
-** {H13621} The [sqlite3_bind_parameter_name(S,N)] interface returns
-** a UTF-8 rendering of the name of the SQL parameter in
-** the [prepared statement] S having index N, or
-** NULL if there is no SQL parameter with index N or if the
-** parameter with index N is an anonymous parameter "?".
*/
-const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
/*
-** CAPI3REF: Index Of A Parameter With A Given Name {H13640} <S70300>
+** CAPI3REF: Index Of A Parameter With A Given Name
+** METHOD: sqlite3_stmt
**
-** Return the index of an SQL parameter given its name. The
+** ^Return the index of an SQL parameter given its name. ^The
** index value returned is suitable for use as the second
-** parameter to [sqlite3_bind_blob|sqlite3_bind()]. A zero
-** is returned if no matching parameter is found. The parameter
+** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero
+** is returned if no matching parameter is found. ^The parameter
** name must be given in UTF-8 even if the original statement
-** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
+** was prepared from UTF-16 text using [sqlite3_prepare16_v2()] or
+** [sqlite3_prepare16_v3()].
**
** See also: [sqlite3_bind_blob|sqlite3_bind()],
** [sqlite3_bind_parameter_count()], and
-** [sqlite3_bind_parameter_index()].
-**
-** INVARIANTS:
-**
-** {H13641} The [sqlite3_bind_parameter_index(S,N)] interface returns
-** the index of SQL parameter in the [prepared statement]
-** S whose name matches the UTF-8 string N, or 0 if there is
-** no match.
+** [sqlite3_bind_parameter_name()].
*/
-int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
/*
-** CAPI3REF: Reset All Bindings On A Prepared Statement {H13660} <S70300>
+** CAPI3REF: Reset All Bindings On A Prepared Statement
+** METHOD: sqlite3_stmt
**
-** Contrary to the intuition of many, [sqlite3_reset()] does not reset
+** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset
** the [sqlite3_bind_blob | bindings] on a [prepared statement].
-** Use this routine to reset all host parameters to NULL.
-**
-** INVARIANTS:
-**
-** {H13661} The [sqlite3_clear_bindings(S)] interface resets all SQL
-** parameter bindings in the [prepared statement] S back to NULL.
+** ^Use this routine to reset all host parameters to NULL.
*/
-int sqlite3_clear_bindings(sqlite3_stmt*);
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
/*
-** CAPI3REF: Number Of Columns In A Result Set {H13710} <S10700>
-**
-** Return the number of columns in the result set returned by the
-** [prepared statement]. This routine returns 0 if pStmt is an SQL
-** statement that does not return data (for example an [UPDATE]).
+** CAPI3REF: Number Of Columns In A Result Set
+** METHOD: sqlite3_stmt
**
-** INVARIANTS:
+** ^Return the number of columns in the result set returned by the
+** [prepared statement]. ^If this routine returns 0, that means the
+** [prepared statement] returns no data (for example an [UPDATE]).
+** ^However, just because this routine returns a positive number does not
+** mean that one or more rows of data will be returned. ^A SELECT statement
+** will always have a positive sqlite3_column_count() but depending on the
+** WHERE clause constraints and the table content, it might return no rows.
**
-** {H13711} The [sqlite3_column_count(S)] interface returns the number of
-** columns in the result set generated by the [prepared statement] S,
-** or 0 if S does not generate a result set.
+** See also: [sqlite3_data_count()]
*/
-int sqlite3_column_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
/*
-** CAPI3REF: Column Names In A Result Set {H13720} <S10700>
+** CAPI3REF: Column Names In A Result Set
+** METHOD: sqlite3_stmt
**
-** These routines return the name assigned to a particular column
-** in the result set of a [SELECT] statement. The sqlite3_column_name()
+** ^These routines return the name assigned to a particular column
+** in the result set of a [SELECT] statement. ^The sqlite3_column_name()
** interface returns a pointer to a zero-terminated UTF-8 string
** and sqlite3_column_name16() returns a pointer to a zero-terminated
-** UTF-16 string. The first parameter is the [prepared statement]
-** that implements the [SELECT] statement. The second parameter is the
-** column number. The leftmost column is number 0.
-**
-** The returned string pointer is valid until either the [prepared statement]
-** is destroyed by [sqlite3_finalize()] or until the next call to
+** UTF-16 string. ^The first parameter is the [prepared statement]
+** that implements the [SELECT] statement. ^The second parameter is the
+** column number. ^The leftmost column is number 0.
+**
+** ^The returned string pointer is valid until either the [prepared statement]
+** is destroyed by [sqlite3_finalize()] or until the statement is automatically
+** reprepared by the first call to [sqlite3_step()] for a particular run
+** or until the next call to
** sqlite3_column_name() or sqlite3_column_name16() on the same column.
**
-** If sqlite3_malloc() fails during the processing of either routine
+** ^If sqlite3_malloc() fails during the processing of either routine
** (for example during a conversion from UTF-8 to UTF-16) then a
** NULL pointer is returned.
**
-** The name of a result column is the value of the "AS" clause for
+** ^The name of a result column is the value of the "AS" clause for
** that column, if there is an AS clause. If there is no AS clause
** then the name of the column is unspecified and may change from
** one release of SQLite to the next.
-**
-** INVARIANTS:
-**
-** {H13721} A successful invocation of the [sqlite3_column_name(S,N)]
-** interface returns the name of the Nth column (where 0 is
-** the leftmost column) for the result set of the
-** [prepared statement] S as a zero-terminated UTF-8 string.
-**
-** {H13723} A successful invocation of the [sqlite3_column_name16(S,N)]
-** interface returns the name of the Nth column (where 0 is
-** the leftmost column) for the result set of the
-** [prepared statement] S as a zero-terminated UTF-16 string
-** in the native byte order.
-**
-** {H13724} The [sqlite3_column_name()] and [sqlite3_column_name16()]
-** interfaces return a NULL pointer if they are unable to
-** allocate memory to hold their normal return strings.
-**
-** {H13725} If the N parameter to [sqlite3_column_name(S,N)] or
-** [sqlite3_column_name16(S,N)] is out of range, then the
-** interfaces return a NULL pointer.
-**
-** {H13726} The strings returned by [sqlite3_column_name(S,N)] and
-** [sqlite3_column_name16(S,N)] are valid until the next
-** call to either routine with the same S and N parameters
-** or until [sqlite3_finalize(S)] is called.
-**
-** {H13727} When a result column of a [SELECT] statement contains
-** an AS clause, the name of that column is the identifier
-** to the right of the AS keyword.
*/
-const char *sqlite3_column_name(sqlite3_stmt*, int N);
-const void *sqlite3_column_name16(sqlite3_stmt*, int N);
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
/*
-** CAPI3REF: Source Of Data In A Query Result {H13740} <S10700>
+** CAPI3REF: Source Of Data In A Query Result
+** METHOD: sqlite3_stmt
**
-** These routines provide a means to determine what column of what
-** table in which database a result of a [SELECT] statement comes from.
-** The name of the database or table or column can be returned as
-** either a UTF-8 or UTF-16 string. The _database_ routines return
+** ^These routines provide a means to determine the database, table, and
+** table column that is the origin of a particular result column in
+** [SELECT] statement.
+** ^The name of the database or table or column can be returned as
+** either a UTF-8 or UTF-16 string. ^The _database_ routines return
** the database name, the _table_ routines return the table name, and
** the origin_ routines return the column name.
-** The returned string is valid until the [prepared statement] is destroyed
-** using [sqlite3_finalize()] or until the same information is requested
+** ^The returned string is valid until the [prepared statement] is destroyed
+** using [sqlite3_finalize()] or until the statement is automatically
+** reprepared by the first call to [sqlite3_step()] for a particular run
+** or until the same information is requested
** again in a different encoding.
**
-** The names returned are the original un-aliased names of the
+** ^The names returned are the original un-aliased names of the
** database, table, and column.
**
-** The first argument to the following calls is a [prepared statement].
-** These functions return information about the Nth column returned by
+** ^The first argument to these interfaces is a [prepared statement].
+** ^These functions return information about the Nth result column returned by
** the statement, where N is the second function argument.
+** ^The left-most column is column 0 for these routines.
**
-** If the Nth column returned by the statement is an expression or
+** ^If the Nth column returned by the statement is an expression or
** subquery and is not a column value, then all of these functions return
-** NULL. These routine might also return NULL if a memory allocation error
-** occurs. Otherwise, they return the name of the attached database, table
-** and column that query result column was extracted from.
+** NULL. ^These routine might also return NULL if a memory allocation error
+** occurs. ^Otherwise, they return the name of the attached database, table,
+** or column that query result column was extracted from.
**
-** As with all other SQLite APIs, those postfixed with "16" return
-** UTF-16 encoded strings, the other functions return UTF-8. {END}
+** ^As with all other SQLite APIs, those whose names end with "16" return
+** UTF-16 encoded strings and the other functions return UTF-8.
**
-** These APIs are only available if the library was compiled with the
-** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined.
+** ^These APIs are only available if the library was compiled with the
+** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol.
**
-** {A13751}
** If two or more threads call one or more of these routines against the same
** prepared statement and column at the same time then the results are
** undefined.
**
-** INVARIANTS:
-**
-** {H13741} The [sqlite3_column_database_name(S,N)] interface returns either
-** the UTF-8 zero-terminated name of the database from which the
-** Nth result column of the [prepared statement] S is extracted,
-** or NULL if the Nth column of S is a general expression
-** or if unable to allocate memory to store the name.
-**
-** {H13742} The [sqlite3_column_database_name16(S,N)] interface returns either
-** the UTF-16 native byte order zero-terminated name of the database
-** from which the Nth result column of the [prepared statement] S is
-** extracted, or NULL if the Nth column of S is a general expression
-** or if unable to allocate memory to store the name.
-**
-** {H13743} The [sqlite3_column_table_name(S,N)] interface returns either
-** the UTF-8 zero-terminated name of the table from which the
-** Nth result column of the [prepared statement] S is extracted,
-** or NULL if the Nth column of S is a general expression
-** or if unable to allocate memory to store the name.
-**
-** {H13744} The [sqlite3_column_table_name16(S,N)] interface returns either
-** the UTF-16 native byte order zero-terminated name of the table
-** from which the Nth result column of the [prepared statement] S is
-** extracted, or NULL if the Nth column of S is a general expression
-** or if unable to allocate memory to store the name.
-**
-** {H13745} The [sqlite3_column_origin_name(S,N)] interface returns either
-** the UTF-8 zero-terminated name of the table column from which the
-** Nth result column of the [prepared statement] S is extracted,
-** or NULL if the Nth column of S is a general expression
-** or if unable to allocate memory to store the name.
-**
-** {H13746} The [sqlite3_column_origin_name16(S,N)] interface returns either
-** the UTF-16 native byte order zero-terminated name of the table
-** column from which the Nth result column of the
-** [prepared statement] S is extracted, or NULL if the Nth column
-** of S is a general expression or if unable to allocate memory
-** to store the name.
-**
-** {H13748} The return values from
-** [sqlite3_column_database_name | column metadata interfaces]
-** are valid for the lifetime of the [prepared statement]
-** or until the encoding is changed by another metadata
-** interface call for the same prepared statement and column.
-**
-** ASSUMPTIONS:
-**
-** {A13751} If two or more threads call one or more
-** [sqlite3_column_database_name | column metadata interfaces]
-** for the same [prepared statement] and result column
-** at the same time then the results are undefined.
-*/
-const char *sqlite3_column_database_name(sqlite3_stmt*,int);
-const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
-const char *sqlite3_column_table_name(sqlite3_stmt*,int);
-const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
-const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
-const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
-
-/*
-** CAPI3REF: Declared Datatype Of A Query Result {H13760} <S10700>
-**
-** The first parameter is a [prepared statement].
+** If two or more threads call one or more
+** [sqlite3_column_database_name | column metadata interfaces]
+** for the same [prepared statement] and result column
+** at the same time then the results are undefined.
+*/
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
+
+/*
+** CAPI3REF: Declared Datatype Of A Query Result
+** METHOD: sqlite3_stmt
+**
+** ^(The first parameter is a [prepared statement].
** If this statement is a [SELECT] statement and the Nth column of the
** returned result set of that [SELECT] is a table column (not an
** expression or subquery) then the declared type of the table
-** column is returned. If the Nth column of the result set is an
+** column is returned.)^ ^If the Nth column of the result set is an
** expression or subquery, then a NULL pointer is returned.
-** The returned string is always UTF-8 encoded. {END}
+** ^The returned string is always UTF-8 encoded.
**
-** For example, given the database schema:
+** ^(For example, given the database schema:
**
** CREATE TABLE t1(c1 VARIANT);
**
** SELECT c1 + 1, c1 FROM t1;
**
** this routine would return the string "VARIANT" for the second result
-** column (i==1), and a NULL pointer for the first result column (i==0).
+** column (i==1), and a NULL pointer for the first result column (i==0).)^
**
-** SQLite uses dynamic run-time typing. So just because a column
+** ^SQLite uses dynamic run-time typing. ^So just because a column
** is declared to contain a particular type does not mean that the
** data stored in that column is of the declared type. SQLite is
-** strongly typed, but the typing is dynamic not static. Type
+** strongly typed, but the typing is dynamic not static. ^Type
** is associated with individual values, not with the containers
** used to hold those values.
-**
-** INVARIANTS:
-**
-** {H13761} A successful call to [sqlite3_column_decltype(S,N)] returns a
-** zero-terminated UTF-8 string containing the declared datatype
-** of the table column that appears as the Nth column (numbered
-** from 0) of the result set to the [prepared statement] S.
-**
-** {H13762} A successful call to [sqlite3_column_decltype16(S,N)]
-** returns a zero-terminated UTF-16 native byte order string
-** containing the declared datatype of the table column that appears
-** as the Nth column (numbered from 0) of the result set to the
-** [prepared statement] S.
-**
-** {H13763} If N is less than 0 or N is greater than or equal to
-** the number of columns in the [prepared statement] S,
-** or if the Nth column of S is an expression or subquery rather
-** than a table column, or if a memory allocation failure
-** occurs during encoding conversions, then
-** calls to [sqlite3_column_decltype(S,N)] or
-** [sqlite3_column_decltype16(S,N)] return NULL.
*/
-const char *sqlite3_column_decltype(sqlite3_stmt*,int);
-const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
/*
-** CAPI3REF: Evaluate An SQL Statement {H13200} <S10000>
+** CAPI3REF: Evaluate An SQL Statement
+** METHOD: sqlite3_stmt
**
-** After a [prepared statement] has been prepared using either
-** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
+** After a [prepared statement] has been prepared using any of
+** [sqlite3_prepare_v2()], [sqlite3_prepare_v3()], [sqlite3_prepare16_v2()],
+** or [sqlite3_prepare16_v3()] or one of the legacy
** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function
** must be called one or more times to evaluate the statement.
**
** The details of the behavior of the sqlite3_step() interface depend
-** on whether the statement was prepared using the newer "v2" interface
-** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy
-** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the
-** new "v2" interface is recommended for new applications but the legacy
+** on whether the statement was prepared using the newer "vX" interfaces
+** [sqlite3_prepare_v3()], [sqlite3_prepare_v2()], [sqlite3_prepare16_v3()],
+** [sqlite3_prepare16_v2()] or the older legacy
+** interfaces [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the
+** new "vX" interface is recommended for new applications but the legacy
** interface will continue to be supported.
**
-** In the legacy interface, the return value will be either [SQLITE_BUSY],
+** ^In the legacy interface, the return value will be either [SQLITE_BUSY],
** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
-** With the "v2" interface, any of the other [result codes] or
+** ^With the "v2" interface, any of the other [result codes] or
** [extended result codes] might be returned as well.
**
-** [SQLITE_BUSY] means that the database engine was unable to acquire the
-** database locks it needs to do its job. If the statement is a [COMMIT]
+** ^[SQLITE_BUSY] means that the database engine was unable to acquire the
+** database locks it needs to do its job. ^If the statement is a [COMMIT]
** or occurs outside of an explicit transaction, then you can retry the
-** statement. If the statement is not a [COMMIT] and occurs within a
+** statement. If the statement is not a [COMMIT] and occurs within an
** explicit transaction then you should rollback the transaction before
** continuing.
**
-** [SQLITE_DONE] means that the statement has finished executing
+** ^[SQLITE_DONE] means that the statement has finished executing
** successfully. sqlite3_step() should not be called again on this virtual
** machine without first calling [sqlite3_reset()] to reset the virtual
** machine back to its initial state.
**
-** If the SQL statement being executed returns any data, then [SQLITE_ROW]
+** ^If the SQL statement being executed returns any data, then [SQLITE_ROW]
** is returned each time a new row of data is ready for processing by the
** caller. The values may be accessed using the [column access functions].
** sqlite3_step() is called again to retrieve the next row of data.
**
-** [SQLITE_ERROR] means that a run-time error (such as a constraint
+** ^[SQLITE_ERROR] means that a run-time error (such as a constraint
** violation) has occurred. sqlite3_step() should not be called again on
** the VM. More information may be found by calling [sqlite3_errmsg()].
-** With the legacy interface, a more specific error code (for example,
+** ^With the legacy interface, a more specific error code (for example,
** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth)
** can be obtained by calling [sqlite3_reset()] on the
-** [prepared statement]. In the "v2" interface,
+** [prepared statement]. ^In the "v2" interface,
** the more specific error code is returned directly by sqlite3_step().
**
** [SQLITE_MISUSE] means that the this routine was called inappropriately.
** be the case that the same database connection is being used by two or
** more threads at the same moment in time.
**
+** For all versions of SQLite up to and including 3.6.23.1, a call to
+** [sqlite3_reset()] was required after sqlite3_step() returned anything
+** other than [SQLITE_ROW] before any subsequent invocation of
+** sqlite3_step(). Failure to reset the prepared statement using
+** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
+** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1],
+** sqlite3_step() began
+** calling [sqlite3_reset()] automatically in this circumstance rather
+** than returning [SQLITE_MISUSE]. This is not considered a compatibility
+** break because any application that ever receives an SQLITE_MISUSE error
+** is broken by definition. The [SQLITE_OMIT_AUTORESET] compile-time option
+** can be used to restore the legacy behavior.
+**
** <b>Goofy Interface Alert:</b> In the legacy interface, the sqlite3_step()
** API always returns a generic error code, [SQLITE_ERROR], following any
** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call
** specific [error codes] that better describes the error.
** We admit that this is a goofy design. The problem has been fixed
** with the "v2" interface. If you prepare all of your SQL statements
-** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
+** using [sqlite3_prepare_v3()] or [sqlite3_prepare_v2()]
+** or [sqlite3_prepare16_v2()] or [sqlite3_prepare16_v3()] instead
** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
** then the more specific [error codes] are returned directly
-** by sqlite3_step(). The use of the "v2" interface is recommended.
-**
-** INVARIANTS:
-**
-** {H13202} If the [prepared statement] S is ready to be run, then
-** [sqlite3_step(S)] advances that prepared statement until
-** completion or until it is ready to return another row of the
-** result set, or until an [sqlite3_interrupt | interrupt]
-** or a run-time error occurs.
-**
-** {H15304} When a call to [sqlite3_step(S)] causes the [prepared statement]
-** S to run to completion, the function returns [SQLITE_DONE].
-**
-** {H15306} When a call to [sqlite3_step(S)] stops because it is ready to
-** return another row of the result set, it returns [SQLITE_ROW].
-**
-** {H15308} If a call to [sqlite3_step(S)] encounters an
-** [sqlite3_interrupt | interrupt] or a run-time error,
-** it returns an appropriate error code that is not one of
-** [SQLITE_OK], [SQLITE_ROW], or [SQLITE_DONE].
-**
-** {H15310} If an [sqlite3_interrupt | interrupt] or a run-time error
-** occurs during a call to [sqlite3_step(S)]
-** for a [prepared statement] S created using
-** legacy interfaces [sqlite3_prepare()] or
-** [sqlite3_prepare16()], then the function returns either
-** [SQLITE_ERROR], [SQLITE_BUSY], or [SQLITE_MISUSE].
+** by sqlite3_step(). The use of the "vX" interfaces is recommended.
*/
-int sqlite3_step(sqlite3_stmt*);
+SQLITE_API int sqlite3_step(sqlite3_stmt*);
/*
-** CAPI3REF: Number of columns in a result set {H13770} <S10700>
-**
-** Returns the number of values in the current row of the result set.
+** CAPI3REF: Number of columns in a result set
+** METHOD: sqlite3_stmt
**
-** INVARIANTS:
+** ^The sqlite3_data_count(P) interface returns the number of columns in the
+** current row of the result set of [prepared statement] P.
+** ^If prepared statement P does not have results ready to return
+** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of
+** interfaces) then sqlite3_data_count(P) returns 0.
+** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer.
+** ^The sqlite3_data_count(P) routine returns 0 if the previous call to
+** [sqlite3_step](P) returned [SQLITE_DONE]. ^The sqlite3_data_count(P)
+** will return non-zero if previous call to [sqlite3_step](P) returned
+** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum]
+** where it always returns zero since each step of that multi-step
+** pragma returns 0 columns of data.
**
-** {H13771} After a call to [sqlite3_step(S)] that returns [SQLITE_ROW],
-** the [sqlite3_data_count(S)] routine will return the same value
-** as the [sqlite3_column_count(S)] function.
-**
-** {H13772} After [sqlite3_step(S)] has returned any value other than
-** [SQLITE_ROW] or before [sqlite3_step(S)] has been called on the
-** [prepared statement] for the first time since it was
-** [sqlite3_prepare | prepared] or [sqlite3_reset | reset],
-** the [sqlite3_data_count(S)] routine returns zero.
+** See also: [sqlite3_column_count()]
*/
-int sqlite3_data_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
/*
-** CAPI3REF: Fundamental Datatypes {H10265} <S10110><S10120>
+** CAPI3REF: Fundamental Datatypes
** KEYWORDS: SQLITE_TEXT
**
-** {H10266} Every value in SQLite has one of five fundamental datatypes:
+** ^(Every value in SQLite has one of five fundamental datatypes:
**
** <ul>
** <li> 64-bit signed integer
** <li> string
** <li> BLOB
** <li> NULL
-** </ul> {END}
+** </ul>)^
**
** These constants are codes for each of those types.
**
#define SQLITE3_TEXT 3
/*
-** CAPI3REF: Result Values From A Query {H13800} <S10700>
+** CAPI3REF: Result Values From A Query
** KEYWORDS: {column access functions}
-**
-** These routines form the "result set query" interface.
-**
-** These routines return information about a single column of the current
-** result row of a query. In every case the first argument is a pointer
+** METHOD: sqlite3_stmt
+**
+** <b>Summary:</b>
+** <blockquote><table border=0 cellpadding=0 cellspacing=0>
+** <tr><td><b>sqlite3_column_blob</b><td>→<td>BLOB result
+** <tr><td><b>sqlite3_column_double</b><td>→<td>REAL result
+** <tr><td><b>sqlite3_column_int</b><td>→<td>32-bit INTEGER result
+** <tr><td><b>sqlite3_column_int64</b><td>→<td>64-bit INTEGER result
+** <tr><td><b>sqlite3_column_text</b><td>→<td>UTF-8 TEXT result
+** <tr><td><b>sqlite3_column_text16</b><td>→<td>UTF-16 TEXT result
+** <tr><td><b>sqlite3_column_value</b><td>→<td>The result as an
+** [sqlite3_value|unprotected sqlite3_value] object.
+** <tr><td> <td> <td>
+** <tr><td><b>sqlite3_column_bytes</b><td>→<td>Size of a BLOB
+** or a UTF-8 TEXT result in bytes
+** <tr><td><b>sqlite3_column_bytes16 </b>
+** <td>→ <td>Size of UTF-16
+** TEXT in bytes
+** <tr><td><b>sqlite3_column_type</b><td>→<td>Default
+** datatype of the result
+** </table></blockquote>
+**
+** <b>Details:</b>
+**
+** ^These routines return information about a single column of the current
+** result row of a query. ^In every case the first argument is a pointer
** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
** that was returned from [sqlite3_prepare_v2()] or one of its variants)
** and the second argument is the index of the column for which information
-** should be returned. The leftmost column of the result set has the index 0.
+** should be returned. ^The leftmost column of the result set has the index 0.
+** ^The number of columns in the result can be determined using
+** [sqlite3_column_count()].
**
** If the SQL statement does not currently point to a valid row, or if the
** column index is out of range, the result is undefined.
** are called from a different thread while any of these routines
** are pending, then the results are undefined.
**
-** The sqlite3_column_type() routine returns the
+** The first six interfaces (_blob, _double, _int, _int64, _text, and _text16)
+** each return the value of a result column in a specific data format. If
+** the result column is not initially in the requested format (for example,
+** if the query returns an integer but the sqlite3_column_text() interface
+** is used to extract the value) then an automatic type conversion is performed.
+**
+** ^The sqlite3_column_type() routine returns the
** [SQLITE_INTEGER | datatype code] for the initial data type
-** of the result column. The returned value is one of [SQLITE_INTEGER],
-** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value
-** returned by sqlite3_column_type() is only meaningful if no type
-** conversions have occurred as described below. After a type conversion,
-** the value returned by sqlite3_column_type() is undefined. Future
+** of the result column. ^The returned value is one of [SQLITE_INTEGER],
+** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].
+** The return value of sqlite3_column_type() can be used to decide which
+** of the first six interface should be used to extract the column value.
+** The value returned by sqlite3_column_type() is only meaningful if no
+** automatic type conversions have occurred for the value in question.
+** After a type conversion, the result of calling sqlite3_column_type()
+** is undefined, though harmless. Future
** versions of SQLite may change the behavior of sqlite3_column_type()
** following a type conversion.
**
-** If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
+** If the result is a BLOB or a TEXT string, then the sqlite3_column_bytes()
+** or sqlite3_column_bytes16() interfaces can be used to determine the size
+** of that BLOB or string.
+**
+** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
** routine returns the number of bytes in that BLOB or string.
-** If the result is a UTF-16 string, then sqlite3_column_bytes() converts
+** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts
** the string to UTF-8 and then returns the number of bytes.
-** If the result is a numeric value then sqlite3_column_bytes() uses
+** ^If the result is a numeric value then sqlite3_column_bytes() uses
** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns
** the number of bytes in that string.
-** The value returned does not include the zero terminator at the end
-** of the string. For clarity: the value returned is the number of
-** bytes in the string, not the number of characters.
+** ^If the result is NULL, then sqlite3_column_bytes() returns zero.
+**
+** ^If the result is a BLOB or UTF-16 string then the sqlite3_column_bytes16()
+** routine returns the number of bytes in that BLOB or string.
+** ^If the result is a UTF-8 string, then sqlite3_column_bytes16() converts
+** the string to UTF-16 and then returns the number of bytes.
+** ^If the result is a numeric value then sqlite3_column_bytes16() uses
+** [sqlite3_snprintf()] to convert that value to a UTF-16 string and returns
+** the number of bytes in that string.
+** ^If the result is NULL, then sqlite3_column_bytes16() returns zero.
**
-** Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
-** even empty strings, are always zero terminated. The return
-** value from sqlite3_column_blob() for a zero-length BLOB is an arbitrary
-** pointer, possibly even a NULL pointer.
+** ^The values returned by [sqlite3_column_bytes()] and
+** [sqlite3_column_bytes16()] do not include the zero terminators at the end
+** of the string. ^For clarity: the values returned by
+** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of
+** bytes in the string, not the number of characters.
**
-** The sqlite3_column_bytes16() routine is similar to sqlite3_column_bytes()
-** but leaves the result in UTF-16 in native byte order instead of UTF-8.
-** The zero terminator is not included in this count.
+** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
+** even empty strings, are always zero-terminated. ^The return
+** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer.
**
-** The object returned by [sqlite3_column_value()] is an
-** [unprotected sqlite3_value] object. An unprotected sqlite3_value object
-** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()].
+** <b>Warning:</b> ^The object returned by [sqlite3_column_value()] is an
+** [unprotected sqlite3_value] object. In a multithreaded environment,
+** an unprotected sqlite3_value object may only be used safely with
+** [sqlite3_bind_value()] and [sqlite3_result_value()].
** If the [unprotected sqlite3_value] object returned by
** [sqlite3_column_value()] is used in any other way, including calls
** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
-** or [sqlite3_value_bytes()], then the behavior is undefined.
-**
-** These routines attempt to convert the value where appropriate. For
-** example, if the internal representation is FLOAT and a text result
+** or [sqlite3_value_bytes()], the behavior is not threadsafe.
+** Hence, the sqlite3_column_value() interface
+** is normally only useful within the implementation of
+** [application-defined SQL functions] or [virtual tables], not within
+** top-level application code.
+**
+** The these routines may attempt to convert the datatype of the result.
+** ^For example, if the internal representation is FLOAT and a text result
** is requested, [sqlite3_snprintf()] is used internally to perform the
-** conversion automatically. The following table details the conversions
+** conversion automatically. ^(The following table details the conversions
** that are applied:
**
** <blockquote>
**
** <tr><td> NULL <td> INTEGER <td> Result is 0
** <tr><td> NULL <td> FLOAT <td> Result is 0.0
-** <tr><td> NULL <td> TEXT <td> Result is NULL pointer
-** <tr><td> NULL <td> BLOB <td> Result is NULL pointer
+** <tr><td> NULL <td> TEXT <td> Result is a NULL pointer
+** <tr><td> NULL <td> BLOB <td> Result is a NULL pointer
** <tr><td> INTEGER <td> FLOAT <td> Convert from integer to float
** <tr><td> INTEGER <td> TEXT <td> ASCII rendering of the integer
** <tr><td> INTEGER <td> BLOB <td> Same as INTEGER->TEXT
-** <tr><td> FLOAT <td> INTEGER <td> Convert from float to integer
+** <tr><td> FLOAT <td> INTEGER <td> [CAST] to INTEGER
** <tr><td> FLOAT <td> TEXT <td> ASCII rendering of the float
-** <tr><td> FLOAT <td> BLOB <td> Same as FLOAT->TEXT
-** <tr><td> TEXT <td> INTEGER <td> Use atoi()
-** <tr><td> TEXT <td> FLOAT <td> Use atof()
+** <tr><td> FLOAT <td> BLOB <td> [CAST] to BLOB
+** <tr><td> TEXT <td> INTEGER <td> [CAST] to INTEGER
+** <tr><td> TEXT <td> FLOAT <td> [CAST] to REAL
** <tr><td> TEXT <td> BLOB <td> No change
-** <tr><td> BLOB <td> INTEGER <td> Convert to TEXT then use atoi()
-** <tr><td> BLOB <td> FLOAT <td> Convert to TEXT then use atof()
+** <tr><td> BLOB <td> INTEGER <td> [CAST] to INTEGER
+** <tr><td> BLOB <td> FLOAT <td> [CAST] to REAL
** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed
** </table>
-** </blockquote>
-**
-** The table above makes reference to standard C library functions atoi()
-** and atof(). SQLite does not really use these functions. It has its
-** own equivalent internal routines. The atoi() and atof() names are
-** used in the table for brevity and because they are familiar to most
-** C programmers.
+** </blockquote>)^
**
** Note that when type conversions occur, pointers returned by prior
** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or
** to UTF-8.</li>
** </ul>
**
-** Conversions between UTF-16be and UTF-16le are always done in place and do
+** ^Conversions between UTF-16be and UTF-16le are always done in place and do
** not invalidate a prior pointer, though of course the content of the buffer
-** that the prior pointer points to will have been modified. Other kinds
+** that the prior pointer references will have been modified. Other kinds
** of conversion are done in place when it is possible, but sometimes they
** are not possible and in those cases prior pointers are invalidated.
**
-** The safest and easiest to remember policy is to invoke these routines
+** The safest policy is to invoke these routines
** in one of the following ways:
**
** <ul>
** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16()
** with calls to sqlite3_column_bytes().
**
-** The pointers returned are valid until a type conversion occurs as
+** ^The pointers returned are valid until a type conversion occurs as
** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
-** [sqlite3_finalize()] is called. The memory space used to hold strings
-** and BLOBs is freed automatically. Do <b>not</b> pass the pointers returned
-** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
+** [sqlite3_finalize()] is called. ^The memory space used to hold strings
+** and BLOBs is freed automatically. Do not pass the pointers returned
+** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
** [sqlite3_free()].
**
-** If a memory allocation error occurs during the evaluation of any
+** ^(If a memory allocation error occurs during the evaluation of any
** of these routines, a default value is returned. The default value
** is either the integer 0, the floating point number 0.0, or a NULL
** pointer. Subsequent calls to [sqlite3_errcode()] will return
-** [SQLITE_NOMEM].
-**
-** INVARIANTS:
-**
-** {H13803} The [sqlite3_column_blob(S,N)] interface converts the
-** Nth column in the current row of the result set for
-** the [prepared statement] S into a BLOB and then returns a
-** pointer to the converted value.
-**
-** {H13806} The [sqlite3_column_bytes(S,N)] interface returns the
-** number of bytes in the BLOB or string (exclusive of the
-** zero terminator on the string) that was returned by the
-** most recent call to [sqlite3_column_blob(S,N)] or
-** [sqlite3_column_text(S,N)].
-**
-** {H13809} The [sqlite3_column_bytes16(S,N)] interface returns the
-** number of bytes in the string (exclusive of the
-** zero terminator on the string) that was returned by the
-** most recent call to [sqlite3_column_text16(S,N)].
-**
-** {H13812} The [sqlite3_column_double(S,N)] interface converts the
-** Nth column in the current row of the result set for the
-** [prepared statement] S into a floating point value and
-** returns a copy of that value.
-**
-** {H13815} The [sqlite3_column_int(S,N)] interface converts the
-** Nth column in the current row of the result set for the
-** [prepared statement] S into a 64-bit signed integer and
-** returns the lower 32 bits of that integer.
-**
-** {H13818} The [sqlite3_column_int64(S,N)] interface converts the
-** Nth column in the current row of the result set for the
-** [prepared statement] S into a 64-bit signed integer and
-** returns a copy of that integer.
-**
-** {H13821} The [sqlite3_column_text(S,N)] interface converts the
-** Nth column in the current row of the result set for
-** the [prepared statement] S into a zero-terminated UTF-8
-** string and returns a pointer to that string.
-**
-** {H13824} The [sqlite3_column_text16(S,N)] interface converts the
-** Nth column in the current row of the result set for the
-** [prepared statement] S into a zero-terminated 2-byte
-** aligned UTF-16 native byte order string and returns
-** a pointer to that string.
-**
-** {H13827} The [sqlite3_column_type(S,N)] interface returns
-** one of [SQLITE_NULL], [SQLITE_INTEGER], [SQLITE_FLOAT],
-** [SQLITE_TEXT], or [SQLITE_BLOB] as appropriate for
-** the Nth column in the current row of the result set for
-** the [prepared statement] S.
-**
-** {H13830} The [sqlite3_column_value(S,N)] interface returns a
-** pointer to an [unprotected sqlite3_value] object for the
-** Nth column in the current row of the result set for
-** the [prepared statement] S.
-*/
-const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
-int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-double sqlite3_column_double(sqlite3_stmt*, int iCol);
-int sqlite3_column_int(sqlite3_stmt*, int iCol);
-sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
-const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
-const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
-int sqlite3_column_type(sqlite3_stmt*, int iCol);
-sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
-
-/*
-** CAPI3REF: Destroy A Prepared Statement Object {H13300} <S70300><S30100>
-**
-** The sqlite3_finalize() function is called to delete a [prepared statement].
-** If the statement was executed successfully or not executed at all, then
-** SQLITE_OK is returned. If execution of the statement failed then an
-** [error code] or [extended error code] is returned.
-**
-** This routine can be called at any point during the execution of the
-** [prepared statement]. If the virtual machine has not
-** completed execution when this routine is called, that is like
-** encountering an error or an [sqlite3_interrupt | interrupt].
-** Incomplete updates may be rolled back and transactions canceled,
-** depending on the circumstances, and the
-** [error code] returned will be [SQLITE_ABORT].
-**
-** INVARIANTS:
-**
-** {H11302} The [sqlite3_finalize(S)] interface destroys the
-** [prepared statement] S and releases all
-** memory and file resources held by that object.
-**
-** {H11304} If the most recent call to [sqlite3_step(S)] for the
-** [prepared statement] S returned an error,
-** then [sqlite3_finalize(S)] returns that same error.
-*/
-int sqlite3_finalize(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Reset A Prepared Statement Object {H13330} <S70300>
+** [SQLITE_NOMEM].)^
+*/
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
+SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
+
+/*
+** CAPI3REF: Destroy A Prepared Statement Object
+** DESTRUCTOR: sqlite3_stmt
+**
+** ^The sqlite3_finalize() function is called to delete a [prepared statement].
+** ^If the most recent evaluation of the statement encountered no errors
+** or if the statement is never been evaluated, then sqlite3_finalize() returns
+** SQLITE_OK. ^If the most recent evaluation of statement S failed, then
+** sqlite3_finalize(S) returns the appropriate [error code] or
+** [extended error code].
+**
+** ^The sqlite3_finalize(S) routine can be called at any point during
+** the life cycle of [prepared statement] S:
+** before statement S is ever evaluated, after
+** one or more calls to [sqlite3_reset()], or after any call
+** to [sqlite3_step()] regardless of whether or not the statement has
+** completed execution.
+**
+** ^Invoking sqlite3_finalize() on a NULL pointer is a harmless no-op.
+**
+** The application must finalize every [prepared statement] in order to avoid
+** resource leaks. It is a grievous error for the application to try to use
+** a prepared statement after it has been finalized. Any use of a prepared
+** statement after it has been finalized can result in undefined and
+** undesirable behavior such as segfaults and heap corruption.
+*/
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
+
+/*
+** CAPI3REF: Reset A Prepared Statement Object
+** METHOD: sqlite3_stmt
**
** The sqlite3_reset() function is called to reset a [prepared statement]
** object back to its initial state, ready to be re-executed.
-** Any SQL statement variables that had values bound to them using
+** ^Any SQL statement variables that had values bound to them using
** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values.
** Use [sqlite3_clear_bindings()] to reset the bindings.
**
-** {H11332} The [sqlite3_reset(S)] interface resets the [prepared statement] S
-** back to the beginning of its program.
+** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S
+** back to the beginning of its program.
**
-** {H11334} If the most recent call to [sqlite3_step(S)] for the
-** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
-** or if [sqlite3_step(S)] has never before been called on S,
-** then [sqlite3_reset(S)] returns [SQLITE_OK].
+** ^If the most recent call to [sqlite3_step(S)] for the
+** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
+** or if [sqlite3_step(S)] has never before been called on S,
+** then [sqlite3_reset(S)] returns [SQLITE_OK].
**
-** {H11336} If the most recent call to [sqlite3_step(S)] for the
-** [prepared statement] S indicated an error, then
-** [sqlite3_reset(S)] returns an appropriate [error code].
+** ^If the most recent call to [sqlite3_step(S)] for the
+** [prepared statement] S indicated an error, then
+** [sqlite3_reset(S)] returns an appropriate [error code].
**
-** {H11338} The [sqlite3_reset(S)] interface does not change the values
-** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
+** ^The [sqlite3_reset(S)] interface does not change the values
+** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
*/
-int sqlite3_reset(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
/*
-** CAPI3REF: Create Or Redefine SQL Functions {H16100} <S20200>
+** CAPI3REF: Create Or Redefine SQL Functions
** KEYWORDS: {function creation routines}
** KEYWORDS: {application-defined SQL function}
** KEYWORDS: {application-defined SQL functions}
+** METHOD: sqlite3
**
-** These two functions (collectively known as "function creation routines")
+** ^These functions (collectively known as "function creation routines")
** are used to add SQL functions or aggregates or to redefine the behavior
-** of existing SQL functions or aggregates. The only difference between the
-** two is that the second parameter, the name of the (scalar) function or
-** aggregate, is encoded in UTF-8 for sqlite3_create_function() and UTF-16
-** for sqlite3_create_function16().
-**
-** The first parameter is the [database connection] to which the SQL
-** function is to be added. If a single program uses more than one database
-** connection internally, then SQL functions must be added individually to
-** each database connection.
-**
-** The second parameter is the name of the SQL function to be created or
-** redefined. The length of the name is limited to 255 bytes, exclusive of
-** the zero-terminator. Note that the name length limit is in bytes, not
-** characters. Any attempt to create a function with a longer name
-** will result in [SQLITE_ERROR] being returned.
-**
-** The third parameter is the number of arguments that the SQL function or
-** aggregate takes. If this parameter is negative, then the SQL function or
-** aggregate may take any number of arguments.
-**
-** The fourth parameter, eTextRep, specifies what
+** of existing SQL functions or aggregates. The only differences between
+** these routines are the text encoding expected for
+** the second parameter (the name of the function being created)
+** and the presence or absence of a destructor callback for
+** the application data pointer.
+**
+** ^The first parameter is the [database connection] to which the SQL
+** function is to be added. ^If an application uses more than one database
+** connection then application-defined SQL functions must be added
+** to each database connection separately.
+**
+** ^The second parameter is the name of the SQL function to be created or
+** redefined. ^The length of the name is limited to 255 bytes in a UTF-8
+** representation, exclusive of the zero-terminator. ^Note that the name
+** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes.
+** ^Any attempt to create a function with a longer name
+** will result in [SQLITE_MISUSE] being returned.
+**
+** ^The third parameter (nArg)
+** is the number of arguments that the SQL function or
+** aggregate takes. ^If this parameter is -1, then the SQL function or
+** aggregate may take any number of arguments between 0 and the limit
+** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]). If the third
+** parameter is less than -1 or greater than 127 then the behavior is
+** undefined.
+**
+** ^The fourth parameter, eTextRep, specifies what
** [SQLITE_UTF8 | text encoding] this SQL function prefers for
-** its parameters. Any SQL function implementation should be able to work
-** work with UTF-8, UTF-16le, or UTF-16be. But some implementations may be
-** more efficient with one encoding than another. It is allowed to
-** invoke sqlite3_create_function() or sqlite3_create_function16() multiple
-** times with the same function but with different values of eTextRep.
-** When multiple implementations of the same function are available, SQLite
+** its parameters. The application should set this parameter to
+** [SQLITE_UTF16LE] if the function implementation invokes
+** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the
+** implementation invokes [sqlite3_value_text16be()] on an input, or
+** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8]
+** otherwise. ^The same SQL function may be registered multiple times using
+** different preferred text encodings, with different implementations for
+** each encoding.
+** ^When multiple implementations of the same function are available, SQLite
** will pick the one that involves the least amount of data conversion.
-** If there is only a single implementation which does not care what text
-** encoding is used, then the fourth argument should be [SQLITE_ANY].
**
-** The fifth parameter is an arbitrary pointer. The implementation of the
-** function can gain access to this pointer using [sqlite3_user_data()].
+** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC]
+** to signal that the function will always return the same result given
+** the same inputs within a single SQL statement. Most SQL functions are
+** deterministic. The built-in [random()] SQL function is an example of a
+** function that is not deterministic. The SQLite query planner is able to
+** perform additional optimizations on deterministic functions, so use
+** of the [SQLITE_DETERMINISTIC] flag is recommended where possible.
**
-** The seventh, eighth and ninth parameters, xFunc, xStep and xFinal, are
-** pointers to C-language functions that implement the SQL function or
-** aggregate. A scalar SQL function requires an implementation of the xFunc
-** callback only, NULL pointers should be passed as the xStep and xFinal
-** parameters. An aggregate SQL function requires an implementation of xStep
-** and xFinal and NULL should be passed for xFunc. To delete an existing
-** SQL function or aggregate, pass NULL for all three function callbacks.
+** ^(The fifth parameter is an arbitrary pointer. The implementation of the
+** function can gain access to this pointer using [sqlite3_user_data()].)^
**
-** It is permitted to register multiple implementations of the same
+** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are
+** pointers to C-language functions that implement the SQL function or
+** aggregate. ^A scalar SQL function requires an implementation of the xFunc
+** callback only; NULL pointers must be passed as the xStep and xFinal
+** parameters. ^An aggregate SQL function requires an implementation of xStep
+** and xFinal and NULL pointer must be passed for xFunc. ^To delete an existing
+** SQL function or aggregate, pass NULL pointers for all three function
+** callbacks.
+**
+** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL,
+** then it is destructor for the application data pointer.
+** The destructor is invoked when the function is deleted, either by being
+** overloaded or when the database connection closes.)^
+** ^The destructor is also invoked if the call to
+** sqlite3_create_function_v2() fails.
+** ^When the destructor callback of the tenth parameter is invoked, it
+** is passed a single argument which is a copy of the application data
+** pointer which was the fifth parameter to sqlite3_create_function_v2().
+**
+** ^It is permitted to register multiple implementations of the same
** functions with the same name but with either differing numbers of
-** arguments or differing preferred text encodings. SQLite will use
-** the implementation most closely matches the way in which the
-** SQL function is used.
-**
-** INVARIANTS:
-**
-** {H16103} The [sqlite3_create_function16()] interface behaves exactly
-** like [sqlite3_create_function()] in every way except that it
-** interprets the zFunctionName argument as zero-terminated UTF-16
-** native byte order instead of as zero-terminated UTF-8.
-**
-** {H16106} A successful invocation of
-** the [sqlite3_create_function(D,X,N,E,...)] interface registers
-** or replaces callback functions in the [database connection] D
-** used to implement the SQL function named X with N parameters
-** and having a preferred text encoding of E.
-**
-** {H16109} A successful call to [sqlite3_create_function(D,X,N,E,P,F,S,L)]
-** replaces the P, F, S, and L values from any prior calls with
-** the same D, X, N, and E values.
-**
-** {H16112} The [sqlite3_create_function(D,X,...)] interface fails with
-** a return code of [SQLITE_ERROR] if the SQL function name X is
-** longer than 255 bytes exclusive of the zero terminator.
-**
-** {H16118} Either F must be NULL and S and L are non-NULL or else F
-** is non-NULL and S and L are NULL, otherwise
-** [sqlite3_create_function(D,X,N,E,P,F,S,L)] returns [SQLITE_ERROR].
-**
-** {H16121} The [sqlite3_create_function(D,...)] interface fails with an
-** error code of [SQLITE_BUSY] if there exist [prepared statements]
-** associated with the [database connection] D.
-**
-** {H16124} The [sqlite3_create_function(D,X,N,...)] interface fails with an
-** error code of [SQLITE_ERROR] if parameter N (specifying the number
-** of arguments to the SQL function being registered) is less
-** than -1 or greater than 127.
-**
-** {H16127} When N is non-negative, the [sqlite3_create_function(D,X,N,...)]
-** interface causes callbacks to be invoked for the SQL function
-** named X when the number of arguments to the SQL function is
-** exactly N.
-**
-** {H16130} When N is -1, the [sqlite3_create_function(D,X,N,...)]
-** interface causes callbacks to be invoked for the SQL function
-** named X with any number of arguments.
-**
-** {H16133} When calls to [sqlite3_create_function(D,X,N,...)]
-** specify multiple implementations of the same function X
-** and when one implementation has N>=0 and the other has N=(-1)
-** the implementation with a non-zero N is preferred.
-**
-** {H16136} When calls to [sqlite3_create_function(D,X,N,E,...)]
-** specify multiple implementations of the same function X with
-** the same number of arguments N but with different
-** encodings E, then the implementation where E matches the
-** database encoding is preferred.
-**
-** {H16139} For an aggregate SQL function created using
-** [sqlite3_create_function(D,X,N,E,P,0,S,L)] the finalizer
-** function L will always be invoked exactly once if the
-** step function S is called one or more times.
-**
-** {H16142} When SQLite invokes either the xFunc or xStep function of
-** an application-defined SQL function or aggregate created
-** by [sqlite3_create_function()] or [sqlite3_create_function16()],
-** then the array of [sqlite3_value] objects passed as the
-** third parameter are always [protected sqlite3_value] objects.
-*/
-int sqlite3_create_function(
+** arguments or differing preferred text encodings. ^SQLite will use
+** the implementation that most closely matches the way in which the
+** SQL function is used. ^A function implementation with a non-negative
+** nArg parameter is a better match than a function implementation with
+** a negative nArg. ^A function where the preferred text encoding
+** matches the database encoding is a better
+** match than a function where the encoding is different.
+** ^A function where the encoding difference is between UTF16le and UTF16be
+** is a closer match than a function where the encoding difference is
+** between UTF8 and UTF16.
+**
+** ^Built-in functions may be overloaded by new application-defined functions.
+**
+** ^An application-defined function is permitted to call other
+** SQLite interfaces. However, such calls must not
+** close the database connection nor finalize or reset the prepared
+** statement in which the function is running.
+*/
+SQLITE_API int sqlite3_create_function(
sqlite3 *db,
const char *zFunctionName,
int nArg,
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
);
-int sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
sqlite3 *db,
const void *zFunctionName,
int nArg,
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*)
);
+SQLITE_API int sqlite3_create_function_v2(
+ sqlite3 *db,
+ const char *zFunctionName,
+ int nArg,
+ int eTextRep,
+ void *pApp,
+ void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
+ void (*xStep)(sqlite3_context*,int,sqlite3_value**),
+ void (*xFinal)(sqlite3_context*),
+ void(*xDestroy)(void*)
+);
/*
-** CAPI3REF: Text Encodings {H10267} <S50200> <H16100>
+** CAPI3REF: Text Encodings
**
** These constant define integer codes that represent the various
** text encodings supported by SQLite.
*/
-#define SQLITE_UTF8 1
-#define SQLITE_UTF16LE 2
-#define SQLITE_UTF16BE 3
+#define SQLITE_UTF8 1 /* IMP: R-37514-35566 */
+#define SQLITE_UTF16LE 2 /* IMP: R-03371-37637 */
+#define SQLITE_UTF16BE 3 /* IMP: R-51971-34154 */
#define SQLITE_UTF16 4 /* Use native byte order */
-#define SQLITE_ANY 5 /* sqlite3_create_function only */
+#define SQLITE_ANY 5 /* Deprecated */
#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */
+/*
+** CAPI3REF: Function Flags
+**
+** These constants may be ORed together with the
+** [SQLITE_UTF8 | preferred text encoding] as the fourth argument
+** to [sqlite3_create_function()], [sqlite3_create_function16()], or
+** [sqlite3_create_function_v2()].
+*/
+#define SQLITE_DETERMINISTIC 0x800
+
/*
** CAPI3REF: Deprecated Functions
** DEPRECATED
** These functions are [deprecated]. In order to maintain
** backwards compatibility with older code, these functions continue
** to be supported. However, new applications should avoid
-** the use of these functions. To help encourage people to avoid
-** using these functions, we are not going to tell you want they do.
-*/
-SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
-SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_DEPRECATED int sqlite3_global_recover(void);
-SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
-SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64);
+** the use of these functions. To encourage programmers to avoid
+** these functions, we will not explain what they do.
+*/
+#ifndef SQLITE_OMIT_DEPRECATED
+SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+ void*,sqlite3_int64);
+#endif
/*
-** CAPI3REF: Obtaining SQL Function Parameter Values {H15100} <S20200>
-**
-** The C-language implementation of SQL functions and aggregates uses
-** this set of interface routines to access the parameter values on
-** the function or aggregate.
-**
-** The xFunc (for scalar functions) or xStep (for aggregates) parameters
-** to [sqlite3_create_function()] and [sqlite3_create_function16()]
-** define callbacks that implement the SQL functions and aggregates.
-** The 4th parameter to these callbacks is an array of pointers to
-** [protected sqlite3_value] objects. There is one [sqlite3_value] object for
-** each parameter to the SQL function. These routines are used to
-** extract values from the [sqlite3_value] objects.
+** CAPI3REF: Obtaining SQL Values
+** METHOD: sqlite3_value
+**
+** <b>Summary:</b>
+** <blockquote><table border=0 cellpadding=0 cellspacing=0>
+** <tr><td><b>sqlite3_value_blob</b><td>→<td>BLOB value
+** <tr><td><b>sqlite3_value_double</b><td>→<td>REAL value
+** <tr><td><b>sqlite3_value_int</b><td>→<td>32-bit INTEGER value
+** <tr><td><b>sqlite3_value_int64</b><td>→<td>64-bit INTEGER value
+** <tr><td><b>sqlite3_value_pointer</b><td>→<td>Pointer value
+** <tr><td><b>sqlite3_value_text</b><td>→<td>UTF-8 TEXT value
+** <tr><td><b>sqlite3_value_text16</b><td>→<td>UTF-16 TEXT value in
+** the native byteorder
+** <tr><td><b>sqlite3_value_text16be</b><td>→<td>UTF-16be TEXT value
+** <tr><td><b>sqlite3_value_text16le</b><td>→<td>UTF-16le TEXT value
+** <tr><td> <td> <td>
+** <tr><td><b>sqlite3_value_bytes</b><td>→<td>Size of a BLOB
+** or a UTF-8 TEXT in bytes
+** <tr><td><b>sqlite3_value_bytes16 </b>
+** <td>→ <td>Size of UTF-16
+** TEXT in bytes
+** <tr><td><b>sqlite3_value_type</b><td>→<td>Default
+** datatype of the value
+** <tr><td><b>sqlite3_value_numeric_type </b>
+** <td>→ <td>Best numeric datatype of the value
+** </table></blockquote>
+**
+** <b>Details:</b>
+**
+** These routines extract type, size, and content information from
+** [protected sqlite3_value] objects. Protected sqlite3_value objects
+** are used to pass parameter information into implementation of
+** [application-defined SQL functions] and [virtual tables].
**
** These routines work only with [protected sqlite3_value] objects.
** Any attempt to use these routines on an [unprotected sqlite3_value]
-** object results in undefined behavior.
+** is not threadsafe.
**
-** These routines work just like the corresponding [column access functions]
-** except that these routines take a single [protected sqlite3_value] object
+** ^These routines work just like the corresponding [column access functions]
+** except that these routines take a single [protected sqlite3_value] object
** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.
**
-** The sqlite3_value_text16() interface extracts a UTF-16 string
-** in the native byte-order of the host machine. The
+** ^The sqlite3_value_text16() interface extracts a UTF-16 string
+** in the native byte-order of the host machine. ^The
** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
** extract UTF-16 strings as big-endian and little-endian respectively.
**
-** The sqlite3_value_numeric_type() interface attempts to apply
+** ^If [sqlite3_value] object V was initialized
+** using [sqlite3_bind_pointer(S,I,P,X,D)] or [sqlite3_result_pointer(C,P,X,D)]
+** and if X and Y are strings that compare equal according to strcmp(X,Y),
+** then sqlite3_value_pointer(V,Y) will return the pointer P. ^Otherwise,
+** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer()
+** routine is part of the [pointer passing interface] added for SQLite 3.20.0.
+**
+** ^(The sqlite3_value_type(V) interface returns the
+** [SQLITE_INTEGER | datatype code] for the initial datatype of the
+** [sqlite3_value] object V. The returned value is one of [SQLITE_INTEGER],
+** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].)^
+** Other interfaces might change the datatype for an sqlite3_value object.
+** For example, if the datatype is initially SQLITE_INTEGER and
+** sqlite3_value_text(V) is called to extract a text value for that
+** integer, then subsequent calls to sqlite3_value_type(V) might return
+** SQLITE_TEXT. Whether or not a persistent internal datatype conversion
+** occurs is undefined and may change from one release of SQLite to the next.
+**
+** ^(The sqlite3_value_numeric_type() interface attempts to apply
** numeric affinity to the value. This means that an attempt is
** made to convert the value to an integer or floating point. If
** such a conversion is possible without loss of information (in other
** words, if the value is a string that looks like a number)
** then the conversion is performed. Otherwise no conversion occurs.
-** The [SQLITE_INTEGER | datatype] after conversion is returned.
+** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
**
** Please pay particular attention to the fact that the pointer returned
** from [sqlite3_value_blob()], [sqlite3_value_text()], or
**
** These routines must be called from the same thread as
** the SQL function that supplied the [sqlite3_value*] parameters.
-**
-** INVARIANTS:
-**
-** {H15103} The [sqlite3_value_blob(V)] interface converts the
-** [protected sqlite3_value] object V into a BLOB and then
-** returns a pointer to the converted value.
-**
-** {H15106} The [sqlite3_value_bytes(V)] interface returns the
-** number of bytes in the BLOB or string (exclusive of the
-** zero terminator on the string) that was returned by the
-** most recent call to [sqlite3_value_blob(V)] or
-** [sqlite3_value_text(V)].
-**
-** {H15109} The [sqlite3_value_bytes16(V)] interface returns the
-** number of bytes in the string (exclusive of the
-** zero terminator on the string) that was returned by the
-** most recent call to [sqlite3_value_text16(V)],
-** [sqlite3_value_text16be(V)], or [sqlite3_value_text16le(V)].
-**
-** {H15112} The [sqlite3_value_double(V)] interface converts the
-** [protected sqlite3_value] object V into a floating point value and
-** returns a copy of that value.
-**
-** {H15115} The [sqlite3_value_int(V)] interface converts the
-** [protected sqlite3_value] object V into a 64-bit signed integer and
-** returns the lower 32 bits of that integer.
-**
-** {H15118} The [sqlite3_value_int64(V)] interface converts the
-** [protected sqlite3_value] object V into a 64-bit signed integer and
-** returns a copy of that integer.
-**
-** {H15121} The [sqlite3_value_text(V)] interface converts the
-** [protected sqlite3_value] object V into a zero-terminated UTF-8
-** string and returns a pointer to that string.
-**
-** {H15124} The [sqlite3_value_text16(V)] interface converts the
-** [protected sqlite3_value] object V into a zero-terminated 2-byte
-** aligned UTF-16 native byte order
-** string and returns a pointer to that string.
-**
-** {H15127} The [sqlite3_value_text16be(V)] interface converts the
-** [protected sqlite3_value] object V into a zero-terminated 2-byte
-** aligned UTF-16 big-endian
-** string and returns a pointer to that string.
-**
-** {H15130} The [sqlite3_value_text16le(V)] interface converts the
-** [protected sqlite3_value] object V into a zero-terminated 2-byte
-** aligned UTF-16 little-endian
-** string and returns a pointer to that string.
-**
-** {H15133} The [sqlite3_value_type(V)] interface returns
-** one of [SQLITE_NULL], [SQLITE_INTEGER], [SQLITE_FLOAT],
-** [SQLITE_TEXT], or [SQLITE_BLOB] as appropriate for
-** the [sqlite3_value] object V.
-**
-** {H15136} The [sqlite3_value_numeric_type(V)] interface converts
-** the [protected sqlite3_value] object V into either an integer or
-** a floating point value if it can do so without loss of
-** information, and returns one of [SQLITE_NULL],
-** [SQLITE_INTEGER], [SQLITE_FLOAT], [SQLITE_TEXT], or
-** [SQLITE_BLOB] as appropriate for the
-** [protected sqlite3_value] object V after the conversion attempt.
-*/
-const void *sqlite3_value_blob(sqlite3_value*);
-int sqlite3_value_bytes(sqlite3_value*);
-int sqlite3_value_bytes16(sqlite3_value*);
-double sqlite3_value_double(sqlite3_value*);
-int sqlite3_value_int(sqlite3_value*);
-sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
-const unsigned char *sqlite3_value_text(sqlite3_value*);
-const void *sqlite3_value_text16(sqlite3_value*);
-const void *sqlite3_value_text16le(sqlite3_value*);
-const void *sqlite3_value_text16be(sqlite3_value*);
-int sqlite3_value_type(sqlite3_value*);
-int sqlite3_value_numeric_type(sqlite3_value*);
-
-/*
-** CAPI3REF: Obtain Aggregate Function Context {H16210} <S20200>
-**
-** The implementation of aggregate SQL functions use this routine to allocate
-** a structure for storing their state.
-**
-** The first time the sqlite3_aggregate_context() routine is called for a
-** particular aggregate, SQLite allocates nBytes of memory, zeroes out that
-** memory, and returns a pointer to it. On second and subsequent calls to
-** sqlite3_aggregate_context() for the same aggregate function index,
-** the same buffer is returned. The implementation of the aggregate can use
-** the returned buffer to accumulate data.
-**
-** SQLite automatically frees the allocated buffer when the aggregate
-** query concludes.
-**
-** The first parameter should be a copy of the
+*/
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
+SQLITE_API double sqlite3_value_double(sqlite3_value*);
+SQLITE_API int sqlite3_value_int(sqlite3_value*);
+SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
+SQLITE_API void *sqlite3_value_pointer(sqlite3_value*, const char*);
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
+SQLITE_API int sqlite3_value_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
+
+/*
+** CAPI3REF: Finding The Subtype Of SQL Values
+** METHOD: sqlite3_value
+**
+** The sqlite3_value_subtype(V) function returns the subtype for
+** an [application-defined SQL function] argument V. The subtype
+** information can be used to pass a limited amount of context from
+** one SQL function to another. Use the [sqlite3_result_subtype()]
+** routine to set the subtype for the return value of an SQL function.
+*/
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*);
+
+/*
+** CAPI3REF: Copy And Free SQL Values
+** METHOD: sqlite3_value
+**
+** ^The sqlite3_value_dup(V) interface makes a copy of the [sqlite3_value]
+** object D and returns a pointer to that copy. ^The [sqlite3_value] returned
+** is a [protected sqlite3_value] object even if the input is not.
+** ^The sqlite3_value_dup(V) interface returns NULL if V is NULL or if a
+** memory allocation fails.
+**
+** ^The sqlite3_value_free(V) interface frees an [sqlite3_value] object
+** previously obtained from [sqlite3_value_dup()]. ^If V is a NULL pointer
+** then sqlite3_value_free(V) is a harmless no-op.
+*/
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void sqlite3_value_free(sqlite3_value*);
+
+/*
+** CAPI3REF: Obtain Aggregate Function Context
+** METHOD: sqlite3_context
+**
+** Implementations of aggregate SQL functions use this
+** routine to allocate memory for storing their state.
+**
+** ^The first time the sqlite3_aggregate_context(C,N) routine is called
+** for a particular aggregate function, SQLite
+** allocates N of memory, zeroes out that memory, and returns a pointer
+** to the new memory. ^On second and subsequent calls to
+** sqlite3_aggregate_context() for the same aggregate function instance,
+** the same buffer is returned. Sqlite3_aggregate_context() is normally
+** called once for each invocation of the xStep callback and then one
+** last time when the xFinal callback is invoked. ^(When no rows match
+** an aggregate query, the xStep() callback of the aggregate function
+** implementation is never called and xFinal() is called exactly once.
+** In those cases, sqlite3_aggregate_context() might be called for the
+** first time from within xFinal().)^
+**
+** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer
+** when first called if N is less than or equal to zero or if a memory
+** allocate error occurs.
+**
+** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is
+** determined by the N parameter on first successful call. Changing the
+** value of N in subsequent call to sqlite3_aggregate_context() within
+** the same aggregate function instance will not resize the memory
+** allocation.)^ Within the xFinal callback, it is customary to set
+** N=0 in calls to sqlite3_aggregate_context(C,N) so that no
+** pointless memory allocations occur.
+**
+** ^SQLite automatically frees the memory allocated by
+** sqlite3_aggregate_context() when the aggregate query concludes.
+**
+** The first parameter must be a copy of the
** [sqlite3_context | SQL function context] that is the first parameter
-** to the callback routine that implements the aggregate function.
+** to the xStep or xFinal callback routine that implements the aggregate
+** function.
**
** This routine must be called from the same thread in which
** the aggregate SQL function is running.
-**
-** INVARIANTS:
-**
-** {H16211} The first invocation of [sqlite3_aggregate_context(C,N)] for
-** a particular instance of an aggregate function (for a particular
-** context C) causes SQLite to allocate N bytes of memory,
-** zero that memory, and return a pointer to the allocated memory.
-**
-** {H16213} If a memory allocation error occurs during
-** [sqlite3_aggregate_context(C,N)] then the function returns 0.
-**
-** {H16215} Second and subsequent invocations of
-** [sqlite3_aggregate_context(C,N)] for the same context pointer C
-** ignore the N parameter and return a pointer to the same
-** block of memory returned by the first invocation.
-**
-** {H16217} The memory allocated by [sqlite3_aggregate_context(C,N)] is
-** automatically freed on the next call to [sqlite3_reset()]
-** or [sqlite3_finalize()] for the [prepared statement] containing
-** the aggregate function associated with context C.
*/
-void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
/*
-** CAPI3REF: User Data For Functions {H16240} <S20200>
+** CAPI3REF: User Data For Functions
+** METHOD: sqlite3_context
**
-** The sqlite3_user_data() interface returns a copy of
+** ^The sqlite3_user_data() interface returns a copy of
** the pointer that was the pUserData parameter (the 5th parameter)
** of the [sqlite3_create_function()]
** and [sqlite3_create_function16()] routines that originally
-** registered the application defined function. {END}
+** registered the application defined function.
**
** This routine must be called from the same thread in which
** the application-defined function is running.
-**
-** INVARIANTS:
-**
-** {H16243} The [sqlite3_user_data(C)] interface returns a copy of the
-** P pointer from the [sqlite3_create_function(D,X,N,E,P,F,S,L)]
-** or [sqlite3_create_function16(D,X,N,E,P,F,S,L)] call that
-** registered the SQL function associated with [sqlite3_context] C.
*/
-void *sqlite3_user_data(sqlite3_context*);
+SQLITE_API void *sqlite3_user_data(sqlite3_context*);
/*
-** CAPI3REF: Database Connection For Functions {H16250} <S60600><S20200>
+** CAPI3REF: Database Connection For Functions
+** METHOD: sqlite3_context
**
-** The sqlite3_context_db_handle() interface returns a copy of
+** ^The sqlite3_context_db_handle() interface returns a copy of
** the pointer to the [database connection] (the 1st parameter)
** of the [sqlite3_create_function()]
** and [sqlite3_create_function16()] routines that originally
** registered the application defined function.
-**
-** INVARIANTS:
-**
-** {H16253} The [sqlite3_context_db_handle(C)] interface returns a copy of the
-** D pointer from the [sqlite3_create_function(D,X,N,E,P,F,S,L)]
-** or [sqlite3_create_function16(D,X,N,E,P,F,S,L)] call that
-** registered the SQL function associated with [sqlite3_context] C.
*/
-sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
/*
-** CAPI3REF: Function Auxiliary Data {H16270} <S20200>
+** CAPI3REF: Function Auxiliary Data
+** METHOD: sqlite3_context
**
-** The following two functions may be used by scalar SQL functions to
+** These functions may be used by (non-aggregate) SQL functions to
** associate metadata with argument values. If the same value is passed to
** multiple invocations of the same SQL function during query execution, under
-** some circumstances the associated metadata may be preserved. This may
-** be used, for example, to add a regular-expression matching scalar
-** function. The compiled version of the regular expression is stored as
-** metadata associated with the SQL value passed as the regular expression
-** pattern. The compiled regular expression can be reused on multiple
-** invocations of the same function so that the original pattern string
-** does not need to be recompiled on each invocation.
-**
-** The sqlite3_get_auxdata() interface returns a pointer to the metadata
-** associated by the sqlite3_set_auxdata() function with the Nth argument
-** value to the application-defined function. If no metadata has been ever
-** been set for the Nth argument of the function, or if the corresponding
-** function parameter has changed since the meta-data was set,
-** then sqlite3_get_auxdata() returns a NULL pointer.
-**
-** The sqlite3_set_auxdata() interface saves the metadata
-** pointed to by its 3rd parameter as the metadata for the N-th
-** argument of the application-defined function. Subsequent
-** calls to sqlite3_get_auxdata() might return this data, if it has
-** not been destroyed.
-** If it is not NULL, SQLite will invoke the destructor
-** function given by the 4th parameter to sqlite3_set_auxdata() on
-** the metadata when the corresponding function parameter changes
-** or when the SQL statement completes, whichever comes first.
-**
-** SQLite is free to call the destructor and drop metadata on any
-** parameter of any function at any time. The only guarantee is that
-** the destructor will be called before the metadata is dropped.
-**
-** In practice, metadata is preserved between function calls for
-** expressions that are constant at compile time. This includes literal
-** values and SQL variables.
+** some circumstances the associated metadata may be preserved. An example
+** of where this might be useful is in a regular-expression matching
+** function. The compiled version of the regular expression can be stored as
+** metadata associated with the pattern string.
+** Then as long as the pattern string remains the same,
+** the compiled regular expression can be reused on multiple
+** invocations of the same function.
+**
+** ^The sqlite3_get_auxdata(C,N) interface returns a pointer to the metadata
+** associated by the sqlite3_set_auxdata(C,N,P,X) function with the Nth argument
+** value to the application-defined function. ^N is zero for the left-most
+** function argument. ^If there is no metadata
+** associated with the function argument, the sqlite3_get_auxdata(C,N) interface
+** returns a NULL pointer.
+**
+** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
+** argument of the application-defined function. ^Subsequent
+** calls to sqlite3_get_auxdata(C,N) return P from the most recent
+** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or
+** NULL if the metadata has been discarded.
+** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL,
+** SQLite will invoke the destructor function X with parameter P exactly
+** once, when the metadata is discarded.
+** SQLite is free to discard the metadata at any time, including: <ul>
+** <li> ^(when the corresponding function parameter changes)^, or
+** <li> ^(when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
+** SQL statement)^, or
+** <li> ^(when sqlite3_set_auxdata() is invoked again on the same
+** parameter)^, or
+** <li> ^(during the original sqlite3_set_auxdata() call when a memory
+** allocation error occurs.)^ </ul>
+**
+** Note the last bullet in particular. The destructor X in
+** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
+** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata()
+** should be called near the end of the function implementation and the
+** function implementation should not make any use of P after
+** sqlite3_set_auxdata() has been called.
+**
+** ^(In practice, metadata is preserved between function calls for
+** function parameters that are compile-time constants, including literal
+** values and [parameters] and expressions composed from the same.)^
+**
+** The value of the N parameter to these interfaces should be non-negative.
+** Future enhancements may make use of negative N values to define new
+** kinds of function caching behavior.
**
** These routines must be called from the same thread in which
** the SQL function is running.
-**
-** INVARIANTS:
-**
-** {H16272} The [sqlite3_get_auxdata(C,N)] interface returns a pointer
-** to metadata associated with the Nth parameter of the SQL function
-** whose context is C, or NULL if there is no metadata associated
-** with that parameter.
-**
-** {H16274} The [sqlite3_set_auxdata(C,N,P,D)] interface assigns a metadata
-** pointer P to the Nth parameter of the SQL function with context C.
-**
-** {H16276} SQLite will invoke the destructor D with a single argument
-** which is the metadata pointer P following a call to
-** [sqlite3_set_auxdata(C,N,P,D)] when SQLite ceases to hold
-** the metadata.
-**
-** {H16277} SQLite ceases to hold metadata for an SQL function parameter
-** when the value of that parameter changes.
-**
-** {H16278} When [sqlite3_set_auxdata(C,N,P,D)] is invoked, the destructor
-** is called for any prior metadata associated with the same function
-** context C and parameter N.
-**
-** {H16279} SQLite will call destructors for any metadata it is holding
-** in a particular [prepared statement] S when either
-** [sqlite3_reset(S)] or [sqlite3_finalize(S)] is called.
*/
-void *sqlite3_get_auxdata(sqlite3_context*, int N);
-void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
+SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
/*
-** CAPI3REF: Constants Defining Special Destructor Behavior {H10280} <S30100>
+** CAPI3REF: Constants Defining Special Destructor Behavior
**
** These are special values for the destructor that is passed in as the
-** final argument to routines like [sqlite3_result_blob()]. If the destructor
+** final argument to routines like [sqlite3_result_blob()]. ^If the destructor
** argument is SQLITE_STATIC, it means that the content pointer is constant
-** and will never change. It does not need to be destroyed. The
+** and will never change. It does not need to be destroyed. ^The
** SQLITE_TRANSIENT value means that the content will likely change in
** the near future and that SQLite should make its own private copy of
** the content before returning.
**
** The typedef is necessary to work around problems in certain
-** C++ compilers. See ticket #2191.
+** C++ compilers.
*/
typedef void (*sqlite3_destructor_type)(void*);
#define SQLITE_STATIC ((sqlite3_destructor_type)0)
#define SQLITE_TRANSIENT ((sqlite3_destructor_type)-1)
/*
-** CAPI3REF: Setting The Result Of An SQL Function {H16400} <S20200>
+** CAPI3REF: Setting The Result Of An SQL Function
+** METHOD: sqlite3_context
**
** These routines are used by the xFunc or xFinal callbacks that
** implement SQL functions and aggregates. See
** functions used to bind values to host parameters in prepared statements.
** Refer to the [SQL parameter] documentation for additional information.
**
-** The sqlite3_result_blob() interface sets the result from
+** ^The sqlite3_result_blob() interface sets the result from
** an application-defined function to be the BLOB whose content is pointed
** to by the second parameter and which is N bytes long where N is the
** third parameter.
**
-** The sqlite3_result_zeroblob() interfaces set the result of
-** the application-defined function to be a BLOB containing all zero
-** bytes and N bytes in size, where N is the value of the 2nd parameter.
+** ^The sqlite3_result_zeroblob(C,N) and sqlite3_result_zeroblob64(C,N)
+** interfaces set the result of the application-defined function to be
+** a BLOB containing all zero bytes and N bytes in size.
**
-** The sqlite3_result_double() interface sets the result from
+** ^The sqlite3_result_double() interface sets the result from
** an application-defined function to be a floating point value specified
** by its 2nd argument.
**
-** The sqlite3_result_error() and sqlite3_result_error16() functions
+** ^The sqlite3_result_error() and sqlite3_result_error16() functions
** cause the implemented SQL function to throw an exception.
-** SQLite uses the string pointed to by the
+** ^SQLite uses the string pointed to by the
** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16()
-** as the text of an error message. SQLite interprets the error
-** message string from sqlite3_result_error() as UTF-8. SQLite
+** as the text of an error message. ^SQLite interprets the error
+** message string from sqlite3_result_error() as UTF-8. ^SQLite
** interprets the string from sqlite3_result_error16() as UTF-16 in native
-** byte order. If the third parameter to sqlite3_result_error()
+** byte order. ^If the third parameter to sqlite3_result_error()
** or sqlite3_result_error16() is negative then SQLite takes as the error
** message all text up through the first zero character.
-** If the third parameter to sqlite3_result_error() or
+** ^If the third parameter to sqlite3_result_error() or
** sqlite3_result_error16() is non-negative then SQLite takes that many
** bytes (not characters) from the 2nd parameter as the error message.
-** The sqlite3_result_error() and sqlite3_result_error16()
+** ^The sqlite3_result_error() and sqlite3_result_error16()
** routines make a private copy of the error message text before
** they return. Hence, the calling function can deallocate or
** modify the text after they return without harm.
-** The sqlite3_result_error_code() function changes the error code
-** returned by SQLite as a result of an error in a function. By default,
-** the error code is SQLITE_ERROR. A subsequent call to sqlite3_result_error()
+** ^The sqlite3_result_error_code() function changes the error code
+** returned by SQLite as a result of an error in a function. ^By default,
+** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error()
** or sqlite3_result_error16() resets the error code to SQLITE_ERROR.
**
-** The sqlite3_result_toobig() interface causes SQLite to throw an error
-** indicating that a string or BLOB is to long to represent.
+** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an
+** error indicating that a string or BLOB is too long to represent.
**
-** The sqlite3_result_nomem() interface causes SQLite to throw an error
-** indicating that a memory allocation failed.
+** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an
+** error indicating that a memory allocation failed.
**
-** The sqlite3_result_int() interface sets the return value
+** ^The sqlite3_result_int() interface sets the return value
** of the application-defined function to be the 32-bit signed integer
** value given in the 2nd argument.
-** The sqlite3_result_int64() interface sets the return value
+** ^The sqlite3_result_int64() interface sets the return value
** of the application-defined function to be the 64-bit signed integer
** value given in the 2nd argument.
**
-** The sqlite3_result_null() interface sets the return value
+** ^The sqlite3_result_null() interface sets the return value
** of the application-defined function to be NULL.
**
-** The sqlite3_result_text(), sqlite3_result_text16(),
+** ^The sqlite3_result_text(), sqlite3_result_text16(),
** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces
** set the return value of the application-defined function to be
** a text string which is represented as UTF-8, UTF-16 native byte order,
** UTF-16 little endian, or UTF-16 big endian, respectively.
-** SQLite takes the text result from the application from
+** ^The sqlite3_result_text64() interface sets the return value of an
+** application-defined function to be a text string in an encoding
+** specified by the fifth (and last) parameter, which must be one
+** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE].
+** ^SQLite takes the text result from the application from
** the 2nd parameter of the sqlite3_result_text* interfaces.
-** If the 3rd parameter to the sqlite3_result_text* interfaces
+** ^If the 3rd parameter to the sqlite3_result_text* interfaces
** is negative, then SQLite takes result text from the 2nd parameter
** through the first zero character.
-** If the 3rd parameter to the sqlite3_result_text* interfaces
+** ^If the 3rd parameter to the sqlite3_result_text* interfaces
** is non-negative, then as many bytes (not characters) of the text
** pointed to by the 2nd parameter are taken as the application-defined
-** function result.
-** If the 4th parameter to the sqlite3_result_text* interfaces
+** function result. If the 3rd parameter is non-negative, then it
+** must be the byte offset into the string where the NUL terminator would
+** appear if the string where NUL terminated. If any NUL characters occur
+** in the string at a byte offset that is less than the value of the 3rd
+** parameter, then the resulting string will contain embedded NULs and the
+** result of expressions operating on strings with embedded NULs is undefined.
+** ^If the 4th parameter to the sqlite3_result_text* interfaces
** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that
** function as the destructor on the text or BLOB result when it has
** finished using that result.
-** If the 4th parameter to the sqlite3_result_text* interfaces or
+** ^If the 4th parameter to the sqlite3_result_text* interfaces or to
** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite
** assumes that the text or BLOB result is in constant space and does not
-** copy the it or call a destructor when it has finished using that result.
-** If the 4th parameter to the sqlite3_result_text* interfaces
+** copy the content of the parameter nor call a destructor on the content
+** when it has finished using that result.
+** ^If the 4th parameter to the sqlite3_result_text* interfaces
** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
-** then SQLite makes a copy of the result into space obtained from
+** then SQLite makes a copy of the result into space obtained
** from [sqlite3_malloc()] before it returns.
**
-** The sqlite3_result_value() interface sets the result of
-** the application-defined function to be a copy the
-** [unprotected sqlite3_value] object specified by the 2nd parameter. The
+** ^The sqlite3_result_value() interface sets the result of
+** the application-defined function to be a copy of the
+** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The
** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
** so that the [sqlite3_value] specified in the parameter may change or
** be deallocated after sqlite3_result_value() returns without harm.
-** A [protected sqlite3_value] object may always be used where an
+** ^A [protected sqlite3_value] object may always be used where an
** [unprotected sqlite3_value] object is required, so either
** kind of [sqlite3_value] object can be used with this interface.
**
+** ^The sqlite3_result_pointer(C,P,T,D) interface sets the result to an
+** SQL NULL value, just like [sqlite3_result_null(C)], except that it
+** also associates the host-language pointer P or type T with that
+** NULL value such that the pointer can be retrieved within an
+** [application-defined SQL function] using [sqlite3_value_pointer()].
+** ^If the D parameter is not NULL, then it is a pointer to a destructor
+** for the P parameter. ^SQLite invokes D with P as its only argument
+** when SQLite is finished with P. The T parameter should be a static
+** string and preferably a string literal. The sqlite3_result_pointer()
+** routine is part of the [pointer passing interface] added for SQLite 3.20.0.
+**
** If these routines are called from within the different thread
** than the one containing the application-defined function that received
** the [sqlite3_context] pointer, the results are undefined.
-**
-** INVARIANTS:
-**
-** {H16403} The default return value from any SQL function is NULL.
-**
-** {H16406} The [sqlite3_result_blob(C,V,N,D)] interface changes the
-** return value of function C to be a BLOB that is N bytes
-** in length and with content pointed to by V.
-**
-** {H16409} The [sqlite3_result_double(C,V)] interface changes the
-** return value of function C to be the floating point value V.
-**
-** {H16412} The [sqlite3_result_error(C,V,N)] interface changes the return
-** value of function C to be an exception with error code
-** [SQLITE_ERROR] and a UTF-8 error message copied from V up to the
-** first zero byte or until N bytes are read if N is positive.
-**
-** {H16415} The [sqlite3_result_error16(C,V,N)] interface changes the return
-** value of function C to be an exception with error code
-** [SQLITE_ERROR] and a UTF-16 native byte order error message
-** copied from V up to the first zero terminator or until N bytes
-** are read if N is positive.
-**
-** {H16418} The [sqlite3_result_error_toobig(C)] interface changes the return
-** value of the function C to be an exception with error code
-** [SQLITE_TOOBIG] and an appropriate error message.
-**
-** {H16421} The [sqlite3_result_error_nomem(C)] interface changes the return
-** value of the function C to be an exception with error code
-** [SQLITE_NOMEM] and an appropriate error message.
-**
-** {H16424} The [sqlite3_result_error_code(C,E)] interface changes the return
-** value of the function C to be an exception with error code E.
-** The error message text is unchanged.
-**
-** {H16427} The [sqlite3_result_int(C,V)] interface changes the
-** return value of function C to be the 32-bit integer value V.
-**
-** {H16430} The [sqlite3_result_int64(C,V)] interface changes the
-** return value of function C to be the 64-bit integer value V.
-**
-** {H16433} The [sqlite3_result_null(C)] interface changes the
-** return value of function C to be NULL.
-**
-** {H16436} The [sqlite3_result_text(C,V,N,D)] interface changes the
-** return value of function C to be the UTF-8 string
-** V up to the first zero if N is negative
-** or the first N bytes of V if N is non-negative.
-**
-** {H16439} The [sqlite3_result_text16(C,V,N,D)] interface changes the
-** return value of function C to be the UTF-16 native byte order
-** string V up to the first zero if N is negative
-** or the first N bytes of V if N is non-negative.
-**
-** {H16442} The [sqlite3_result_text16be(C,V,N,D)] interface changes the
-** return value of function C to be the UTF-16 big-endian
-** string V up to the first zero if N is negative
-** or the first N bytes or V if N is non-negative.
-**
-** {H16445} The [sqlite3_result_text16le(C,V,N,D)] interface changes the
-** return value of function C to be the UTF-16 little-endian
-** string V up to the first zero if N is negative
-** or the first N bytes of V if N is non-negative.
-**
-** {H16448} The [sqlite3_result_value(C,V)] interface changes the
-** return value of function C to be the [unprotected sqlite3_value]
-** object V.
-**
-** {H16451} The [sqlite3_result_zeroblob(C,N)] interface changes the
-** return value of function C to be an N-byte BLOB of all zeros.
-**
-** {H16454} The [sqlite3_result_error()] and [sqlite3_result_error16()]
-** interfaces make a copy of their error message strings before
-** returning.
-**
-** {H16457} If the D destructor parameter to [sqlite3_result_blob(C,V,N,D)],
-** [sqlite3_result_text(C,V,N,D)], [sqlite3_result_text16(C,V,N,D)],
-** [sqlite3_result_text16be(C,V,N,D)], or
-** [sqlite3_result_text16le(C,V,N,D)] is the constant [SQLITE_STATIC]
-** then no destructor is ever called on the pointer V and SQLite
-** assumes that V is immutable.
-**
-** {H16460} If the D destructor parameter to [sqlite3_result_blob(C,V,N,D)],
-** [sqlite3_result_text(C,V,N,D)], [sqlite3_result_text16(C,V,N,D)],
-** [sqlite3_result_text16be(C,V,N,D)], or
-** [sqlite3_result_text16le(C,V,N,D)] is the constant
-** [SQLITE_TRANSIENT] then the interfaces makes a copy of the
-** content of V and retains the copy.
-**
-** {H16463} If the D destructor parameter to [sqlite3_result_blob(C,V,N,D)],
-** [sqlite3_result_text(C,V,N,D)], [sqlite3_result_text16(C,V,N,D)],
-** [sqlite3_result_text16be(C,V,N,D)], or
-** [sqlite3_result_text16le(C,V,N,D)] is some value other than
-** the constants [SQLITE_STATIC] and [SQLITE_TRANSIENT] then
-** SQLite will invoke the destructor D with V as its only argument
-** when it has finished with the V value.
-*/
-void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-void sqlite3_result_double(sqlite3_context*, double);
-void sqlite3_result_error(sqlite3_context*, const char*, int);
-void sqlite3_result_error16(sqlite3_context*, const void*, int);
-void sqlite3_result_error_toobig(sqlite3_context*);
-void sqlite3_result_error_nomem(sqlite3_context*);
-void sqlite3_result_error_code(sqlite3_context*, int);
-void sqlite3_result_int(sqlite3_context*, int);
-void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-void sqlite3_result_null(sqlite3_context*);
-void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-void sqlite3_result_zeroblob(sqlite3_context*, int n);
-
-/*
-** CAPI3REF: Define New Collating Sequences {H16600} <S20300>
-**
-** These functions are used to add new collation sequences to the
-** [database connection] specified as the first argument.
-**
-** The name of the new collation sequence is specified as a UTF-8 string
+*/
+SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,
+ sqlite3_uint64,void(*)(void*));
+SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
+SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
+SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
+SQLITE_API void sqlite3_result_null(sqlite3_context*);
+SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
+ void(*)(void*), unsigned char encoding);
+SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
+SQLITE_API void sqlite3_result_pointer(sqlite3_context*, void*,const char*,void(*)(void*));
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
+
+
+/*
+** CAPI3REF: Setting The Subtype Of An SQL Function
+** METHOD: sqlite3_context
+**
+** The sqlite3_result_subtype(C,T) function causes the subtype of
+** the result from the [application-defined SQL function] with
+** [sqlite3_context] C to be the value T. Only the lower 8 bits
+** of the subtype T are preserved in current versions of SQLite;
+** higher order bits are discarded.
+** The number of subtype bytes preserved by SQLite might increase
+** in future releases of SQLite.
+*/
+SQLITE_API void sqlite3_result_subtype(sqlite3_context*,unsigned int);
+
+/*
+** CAPI3REF: Define New Collating Sequences
+** METHOD: sqlite3
+**
+** ^These functions add, remove, or modify a [collation] associated
+** with the [database connection] specified as the first argument.
+**
+** ^The name of the collation is a UTF-8 string
** for sqlite3_create_collation() and sqlite3_create_collation_v2()
-** and a UTF-16 string for sqlite3_create_collation16(). In all cases
-** the name is passed as the second function argument.
-**
-** The third argument may be one of the constants [SQLITE_UTF8],
-** [SQLITE_UTF16LE] or [SQLITE_UTF16BE], indicating that the user-supplied
-** routine expects to be passed pointers to strings encoded using UTF-8,
-** UTF-16 little-endian, or UTF-16 big-endian, respectively. The
-** third argument might also be [SQLITE_UTF16_ALIGNED] to indicate that
-** the routine expects pointers to 16-bit word aligned strings
-** of UTF-16 in the native byte order of the host computer.
-**
-** A pointer to the user supplied routine must be passed as the fifth
-** argument. If it is NULL, this is the same as deleting the collation
-** sequence (so that SQLite cannot call it anymore).
-** Each time the application supplied function is invoked, it is passed
-** as its first parameter a copy of the void* passed as the fourth argument
-** to sqlite3_create_collation() or sqlite3_create_collation16().
-**
-** The remaining arguments to the application-supplied routine are two strings,
-** each represented by a (length, data) pair and encoded in the encoding
-** that was passed as the third argument when the collation sequence was
-** registered. {END} The application defined collation routine should
-** return negative, zero or positive if the first string is less than,
-** equal to, or greater than the second string. i.e. (STRING1 - STRING2).
-**
-** The sqlite3_create_collation_v2() works like sqlite3_create_collation()
-** except that it takes an extra argument which is a destructor for
-** the collation. The destructor is called when the collation is
-** destroyed and is passed a copy of the fourth parameter void* pointer
-** of the sqlite3_create_collation_v2().
-** Collations are destroyed when they are overridden by later calls to the
-** collation creation functions or when the [database connection] is closed
-** using [sqlite3_close()].
-**
-** INVARIANTS:
-**
-** {H16603} A successful call to the
-** [sqlite3_create_collation_v2(B,X,E,P,F,D)] interface
-** registers function F as the comparison function used to
-** implement collation X on the [database connection] B for
-** databases having encoding E.
-**
-** {H16604} SQLite understands the X parameter to
-** [sqlite3_create_collation_v2(B,X,E,P,F,D)] as a zero-terminated
-** UTF-8 string in which case is ignored for ASCII characters and
-** is significant for non-ASCII characters.
-**
-** {H16606} Successive calls to [sqlite3_create_collation_v2(B,X,E,P,F,D)]
-** with the same values for B, X, and E, override prior values
-** of P, F, and D.
-**
-** {H16609} If the destructor D in [sqlite3_create_collation_v2(B,X,E,P,F,D)]
-** is not NULL then it is called with argument P when the
-** collating function is dropped by SQLite.
-**
-** {H16612} A collating function is dropped when it is overloaded.
-**
-** {H16615} A collating function is dropped when the database connection
-** is closed using [sqlite3_close()].
-**
-** {H16618} The pointer P in [sqlite3_create_collation_v2(B,X,E,P,F,D)]
-** is passed through as the first parameter to the comparison
-** function F for all subsequent invocations of F.
-**
-** {H16621} A call to [sqlite3_create_collation(B,X,E,P,F)] is exactly
-** the same as a call to [sqlite3_create_collation_v2()] with
-** the same parameters and a NULL destructor.
-**
-** {H16624} Following a [sqlite3_create_collation_v2(B,X,E,P,F,D)],
-** SQLite uses the comparison function F for all text comparison
-** operations on the [database connection] B on text values that
-** use the collating sequence named X.
-**
-** {H16627} The [sqlite3_create_collation16(B,X,E,P,F)] works the same
-** as [sqlite3_create_collation(B,X,E,P,F)] except that the
-** collation name X is understood as UTF-16 in native byte order
-** instead of UTF-8.
-**
-** {H16630} When multiple comparison functions are available for the same
-** collating sequence, SQLite chooses the one whose text encoding
-** requires the least amount of conversion from the default
-** text encoding of the database.
-*/
-int sqlite3_create_collation(
+** and a UTF-16 string in native byte order for sqlite3_create_collation16().
+** ^Collation names that compare equal according to [sqlite3_strnicmp()] are
+** considered to be the same name.
+**
+** ^(The third argument (eTextRep) must be one of the constants:
+** <ul>
+** <li> [SQLITE_UTF8],
+** <li> [SQLITE_UTF16LE],
+** <li> [SQLITE_UTF16BE],
+** <li> [SQLITE_UTF16], or
+** <li> [SQLITE_UTF16_ALIGNED].
+** </ul>)^
+** ^The eTextRep argument determines the encoding of strings passed
+** to the collating function callback, xCallback.
+** ^The [SQLITE_UTF16] and [SQLITE_UTF16_ALIGNED] values for eTextRep
+** force strings to be UTF16 with native byte order.
+** ^The [SQLITE_UTF16_ALIGNED] value for eTextRep forces strings to begin
+** on an even byte address.
+**
+** ^The fourth argument, pArg, is an application data pointer that is passed
+** through as the first argument to the collating function callback.
+**
+** ^The fifth argument, xCallback, is a pointer to the collating function.
+** ^Multiple collating functions can be registered using the same name but
+** with different eTextRep parameters and SQLite will use whichever
+** function requires the least amount of data transformation.
+** ^If the xCallback argument is NULL then the collating function is
+** deleted. ^When all collating functions having the same name are deleted,
+** that collation is no longer usable.
+**
+** ^The collating function callback is invoked with a copy of the pArg
+** application data pointer and with two strings in the encoding specified
+** by the eTextRep argument. The collating function must return an
+** integer that is negative, zero, or positive
+** if the first string is less than, equal to, or greater than the second,
+** respectively. A collating function must always return the same answer
+** given the same inputs. If two or more collating functions are registered
+** to the same collation name (using different eTextRep values) then all
+** must give an equivalent answer when invoked with equivalent strings.
+** The collating function must obey the following properties for all
+** strings A, B, and C:
+**
+** <ol>
+** <li> If A==B then B==A.
+** <li> If A==B and B==C then A==C.
+** <li> If A<B THEN B>A.
+** <li> If A<B and B<C then A<C.
+** </ol>
+**
+** If a collating function fails any of the above constraints and that
+** collating function is registered and used, then the behavior of SQLite
+** is undefined.
+**
+** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation()
+** with the addition that the xDestroy callback is invoked on pArg when
+** the collating function is deleted.
+** ^Collating functions are deleted when they are overridden by later
+** calls to the collation creation functions or when the
+** [database connection] is closed using [sqlite3_close()].
+**
+** ^The xDestroy callback is <u>not</u> called if the
+** sqlite3_create_collation_v2() function fails. Applications that invoke
+** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should
+** check the return code and dispose of the application data pointer
+** themselves rather than expecting SQLite to deal with it for them.
+** This is different from every other SQLite interface. The inconsistency
+** is unfortunate but cannot be changed without breaking backwards
+** compatibility.
+**
+** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
+*/
+SQLITE_API int sqlite3_create_collation(
sqlite3*,
const char *zName,
int eTextRep,
- void*,
+ void *pArg,
int(*xCompare)(void*,int,const void*,int,const void*)
);
-int sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
sqlite3*,
const char *zName,
int eTextRep,
- void*,
+ void *pArg,
int(*xCompare)(void*,int,const void*,int,const void*),
void(*xDestroy)(void*)
);
-int sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
sqlite3*,
const void *zName,
int eTextRep,
- void*,
+ void *pArg,
int(*xCompare)(void*,int,const void*,int,const void*)
);
/*
-** CAPI3REF: Collation Needed Callbacks {H16700} <S20300>
+** CAPI3REF: Collation Needed Callbacks
+** METHOD: sqlite3
**
-** To avoid having to register all collation sequences before a database
+** ^To avoid having to register all collation sequences before a database
** can be used, a single callback function may be registered with the
-** [database connection] to be called whenever an undefined collation
+** [database connection] to be invoked whenever an undefined collation
** sequence is required.
**
-** If the function is registered using the sqlite3_collation_needed() API,
+** ^If the function is registered using the sqlite3_collation_needed() API,
** then it is passed the names of undefined collation sequences as strings
-** encoded in UTF-8. {H16703} If sqlite3_collation_needed16() is used,
+** encoded in UTF-8. ^If sqlite3_collation_needed16() is used,
** the names are passed as UTF-16 in machine native byte order.
-** A call to either function replaces any existing callback.
+** ^A call to either function replaces the existing collation-needed callback.
**
-** When the callback is invoked, the first argument passed is a copy
+** ^(When the callback is invoked, the first argument passed is a copy
** of the second argument to sqlite3_collation_needed() or
** sqlite3_collation_needed16(). The second argument is the database
** connection. The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE],
** or [SQLITE_UTF16LE], indicating the most desirable form of the collation
** sequence function required. The fourth parameter is the name of the
-** required collation sequence.
+** required collation sequence.)^
**
** The callback function should register the desired collation using
** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
** [sqlite3_create_collation_v2()].
-**
-** INVARIANTS:
-**
-** {H16702} A successful call to [sqlite3_collation_needed(D,P,F)]
-** or [sqlite3_collation_needed16(D,P,F)] causes
-** the [database connection] D to invoke callback F with first
-** parameter P whenever it needs a comparison function for a
-** collating sequence that it does not know about.
-**
-** {H16704} Each successful call to [sqlite3_collation_needed()] or
-** [sqlite3_collation_needed16()] overrides the callback registered
-** on the same [database connection] by prior calls to either
-** interface.
-**
-** {H16706} The name of the requested collating function passed in the
-** 4th parameter to the callback is in UTF-8 if the callback
-** was registered using [sqlite3_collation_needed()] and
-** is in UTF-16 native byte order if the callback was
-** registered using [sqlite3_collation_needed16()].
*/
-int sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const char*)
);
-int sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const void*)
);
+#ifdef SQLITE_HAS_CODEC
/*
** Specify the key for an encrypted database. This routine should be
** called right after sqlite3_open().
** The code to implement this API is not available in the public release
** of SQLite.
*/
-int sqlite3_key(
+SQLITE_API int sqlite3_key(
+ sqlite3 *db, /* Database to be rekeyed */
+ const void *pKey, int nKey /* The key */
+);
+SQLITE_API int sqlite3_key_v2(
sqlite3 *db, /* Database to be rekeyed */
+ const char *zDbName, /* Name of the database */
const void *pKey, int nKey /* The key */
);
** The code to implement this API is not available in the public release
** of SQLite.
*/
-int sqlite3_rekey(
+SQLITE_API int sqlite3_rekey(
+ sqlite3 *db, /* Database to be rekeyed */
+ const void *pKey, int nKey /* The new key */
+);
+SQLITE_API int sqlite3_rekey_v2(
sqlite3 *db, /* Database to be rekeyed */
+ const char *zDbName, /* Name of the database */
const void *pKey, int nKey /* The new key */
);
/*
-** CAPI3REF: Suspend Execution For A Short Time {H10530} <S40410>
+** Specify the activation key for a SEE database. Unless
+** activated, none of the SEE routines will work.
+*/
+SQLITE_API void sqlite3_activate_see(
+ const char *zPassPhrase /* Activation phrase */
+);
+#endif
+
+#ifdef SQLITE_ENABLE_CEROD
+/*
+** Specify the activation key for a CEROD database. Unless
+** activated, none of the CEROD routines will work.
+*/
+SQLITE_API void sqlite3_activate_cerod(
+ const char *zPassPhrase /* Activation phrase */
+);
+#endif
+
+/*
+** CAPI3REF: Suspend Execution For A Short Time
**
** The sqlite3_sleep() function causes the current thread to suspend execution
** for at least a number of milliseconds specified in its parameter.
** the nearest second. The number of milliseconds of sleep actually
** requested from the operating system is returned.
**
-** SQLite implements this interface by calling the xSleep()
-** method of the default [sqlite3_vfs] object.
-**
-** INVARIANTS:
-**
-** {H10533} The [sqlite3_sleep(M)] interface invokes the xSleep
-** method of the default [sqlite3_vfs|VFS] in order to
-** suspend execution of the current thread for at least
-** M milliseconds.
-**
-** {H10536} The [sqlite3_sleep(M)] interface returns the number of
-** milliseconds of sleep actually requested of the operating
-** system, which might be larger than the parameter M.
+** ^SQLite implements this interface by calling the xSleep()
+** method of the default [sqlite3_vfs] object. If the xSleep() method
+** of the default VFS is not implemented correctly, or not implemented at
+** all, then the behavior of sqlite3_sleep() may deviate from the description
+** in the previous paragraphs.
*/
-int sqlite3_sleep(int);
+SQLITE_API int sqlite3_sleep(int);
/*
-** CAPI3REF: Name Of The Folder Holding Temporary Files {H10310} <S20000>
+** CAPI3REF: Name Of The Folder Holding Temporary Files
**
-** If this global variable is made to point to a string which is
+** ^(If this global variable is made to point to a string which is
** the name of a folder (a.k.a. directory), then all temporary files
-** created by SQLite will be placed in that directory. If this variable
+** created by SQLite when using a built-in [sqlite3_vfs | VFS]
+** will be placed in that directory.)^ ^If this variable
** is a NULL pointer, then SQLite performs a search for an appropriate
** temporary file directory.
**
-** It is not safe to modify this variable once a [database connection]
-** has been opened. It is intended that this variable be set once
+** Applications are strongly discouraged from using this global variable.
+** It is required to set a temporary folder on Windows Runtime (WinRT).
+** But for all other platforms, it is highly recommended that applications
+** neither read nor write this variable. This global variable is a relic
+** that exists for backwards compatibility of legacy applications and should
+** be avoided in new projects.
+**
+** It is not safe to read or modify this variable in more than one
+** thread at a time. It is not safe to read or modify this variable
+** if a [database connection] is being used at the same time in a separate
+** thread.
+** It is intended that this variable be set once
+** as part of process initialization and before any SQLite interface
+** routines have been called and that this variable remain unchanged
+** thereafter.
+**
+** ^The [temp_store_directory pragma] may modify this variable and cause
+** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore,
+** the [temp_store_directory pragma] always assumes that any string
+** that this variable points to is held in memory obtained from
+** [sqlite3_malloc] and the pragma may attempt to free that memory
+** using [sqlite3_free].
+** Hence, if this variable is modified directly, either it should be
+** made NULL or made to point to memory obtained from [sqlite3_malloc]
+** or else the use of the [temp_store_directory pragma] should be avoided.
+** Except when requested by the [temp_store_directory pragma], SQLite
+** does not free the memory that sqlite3_temp_directory points to. If
+** the application wants that memory to be freed, it must do
+** so itself, taking care to only do so after all [database connection]
+** objects have been destroyed.
+**
+** <b>Note to Windows Runtime users:</b> The temporary directory must be set
+** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various
+** features that require the use of temporary files may fail. Here is an
+** example of how to do this using C++ with the Windows Runtime:
+**
+** <blockquote><pre>
+** LPCWSTR zPath = Windows::Storage::ApplicationData::Current->
+** TemporaryFolder->Path->Data();
+** char zPathBuf[MAX_PATH + 1];
+** memset(zPathBuf, 0, sizeof(zPathBuf));
+** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf),
+** NULL, NULL);
+** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf);
+** </pre></blockquote>
+*/
+SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory;
+
+/*
+** CAPI3REF: Name Of The Folder Holding Database Files
+**
+** ^(If this global variable is made to point to a string which is
+** the name of a folder (a.k.a. directory), then all database files
+** specified with a relative pathname and created or accessed by
+** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed
+** to be relative to that directory.)^ ^If this variable is a NULL
+** pointer, then SQLite assumes that all database files specified
+** with a relative pathname are relative to the current directory
+** for the process. Only the windows VFS makes use of this global
+** variable; it is ignored by the unix VFS.
+**
+** Changing the value of this variable while a database connection is
+** open can result in a corrupt database.
+**
+** It is not safe to read or modify this variable in more than one
+** thread at a time. It is not safe to read or modify this variable
+** if a [database connection] is being used at the same time in a separate
+** thread.
+** It is intended that this variable be set once
** as part of process initialization and before any SQLite interface
-** routines have been call and remain unchanged thereafter.
+** routines have been called and that this variable remain unchanged
+** thereafter.
+**
+** ^The [data_store_directory pragma] may modify this variable and cause
+** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore,
+** the [data_store_directory pragma] always assumes that any string
+** that this variable points to is held in memory obtained from
+** [sqlite3_malloc] and the pragma may attempt to free that memory
+** using [sqlite3_free].
+** Hence, if this variable is modified directly, either it should be
+** made NULL or made to point to memory obtained from [sqlite3_malloc]
+** or else the use of the [data_store_directory pragma] should be avoided.
*/
-SQLITE_EXTERN char *sqlite3_temp_directory;
+SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;
/*
-** CAPI3REF: Test For Auto-Commit Mode {H12930} <S60200>
+** CAPI3REF: Test For Auto-Commit Mode
** KEYWORDS: {autocommit mode}
+** METHOD: sqlite3
**
-** The sqlite3_get_autocommit() interface returns non-zero or
+** ^The sqlite3_get_autocommit() interface returns non-zero or
** zero if the given database connection is or is not in autocommit mode,
-** respectively. Autocommit mode is on by default.
-** Autocommit mode is disabled by a [BEGIN] statement.
-** Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
+** respectively. ^Autocommit mode is on by default.
+** ^Autocommit mode is disabled by a [BEGIN] statement.
+** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
**
** If certain kinds of errors occur on a statement within a multi-statement
** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR],
** find out whether SQLite automatically rolled back the transaction after
** an error is to use this function.
**
-** INVARIANTS:
-**
-** {H12931} The [sqlite3_get_autocommit(D)] interface returns non-zero or
-** zero if the [database connection] D is or is not in autocommit
-** mode, respectively.
-**
-** {H12932} Autocommit mode is on by default.
-**
-** {H12933} Autocommit mode is disabled by a successful [BEGIN] statement.
-**
-** {H12934} Autocommit mode is enabled by a successful [COMMIT] or [ROLLBACK]
-** statement.
-**
-** ASSUMPTIONS:
-**
-** {A12936} If another thread changes the autocommit status of the database
-** connection while this routine is running, then the return value
-** is undefined.
+** If another thread changes the autocommit status of the database
+** connection while this routine is running, then the return value
+** is undefined.
*/
-int sqlite3_get_autocommit(sqlite3*);
+SQLITE_API int sqlite3_get_autocommit(sqlite3*);
/*
-** CAPI3REF: Find The Database Handle Of A Prepared Statement {H13120} <S60600>
+** CAPI3REF: Find The Database Handle Of A Prepared Statement
+** METHOD: sqlite3_stmt
**
-** The sqlite3_db_handle interface returns the [database connection] handle
-** to which a [prepared statement] belongs. The database handle returned by
-** sqlite3_db_handle is the same database handle that was the first argument
+** ^The sqlite3_db_handle interface returns the [database connection] handle
+** to which a [prepared statement] belongs. ^The [database connection]
+** returned by sqlite3_db_handle is the same [database connection]
+** that was the first argument
** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
** create the statement in the first place.
-**
-** INVARIANTS:
-**
-** {H13123} The [sqlite3_db_handle(S)] interface returns a pointer
-** to the [database connection] associated with the
-** [prepared statement] S.
*/
-sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
/*
-** CAPI3REF: Find the next prepared statement {H13140} <S60600>
+** CAPI3REF: Return The Filename For A Database Connection
+** METHOD: sqlite3
**
-** This interface returns a pointer to the next [prepared statement] after
-** pStmt associated with the [database connection] pDb. If pStmt is NULL
-** then this interface returns a pointer to the first prepared statement
-** associated with the database connection pDb. If no prepared statement
-** satisfies the conditions of this routine, it returns NULL.
-**
-** INVARIANTS:
-**
-** {H13143} If D is a [database connection] that holds one or more
-** unfinalized [prepared statements] and S is a NULL pointer,
-** then [sqlite3_next_stmt(D, S)] routine shall return a pointer
-** to one of the prepared statements associated with D.
+** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
+** associated with database N of connection D. ^The main database file
+** has the name "main". If there is no attached database N on the database
+** connection D, or if database N is a temporary or in-memory database, then
+** a NULL pointer is returned.
**
-** {H13146} If D is a [database connection] that holds no unfinalized
-** [prepared statements] and S is a NULL pointer, then
-** [sqlite3_next_stmt(D, S)] routine shall return a NULL pointer.
-**
-** {H13149} If S is a [prepared statement] in the [database connection] D
-** and S is not the last prepared statement in D, then
-** [sqlite3_next_stmt(D, S)] routine shall return a pointer
-** to the next prepared statement in D after S.
+** ^The filename returned by this function is the output of the
+** xFullPathname method of the [VFS]. ^In other words, the filename
+** will be an absolute pathname, even if the filename used
+** to open the database originally was a URI or relative pathname.
+*/
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
+
+/*
+** CAPI3REF: Determine if a database is read-only
+** METHOD: sqlite3
**
-** {H13152} If S is the last [prepared statement] in the
-** [database connection] D then the [sqlite3_next_stmt(D, S)]
-** routine shall return a NULL pointer.
+** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N
+** of connection D is read-only, 0 if it is read/write, or -1 if N is not
+** the name of a database on connection D.
+*/
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
+
+/*
+** CAPI3REF: Find the next prepared statement
+** METHOD: sqlite3
**
-** ASSUMPTIONS:
+** ^This interface returns a pointer to the next [prepared statement] after
+** pStmt associated with the [database connection] pDb. ^If pStmt is NULL
+** then this interface returns a pointer to the first prepared statement
+** associated with the database connection pDb. ^If no prepared statement
+** satisfies the conditions of this routine, it returns NULL.
**
-** {A13154} The [database connection] pointer D in a call to
-** [sqlite3_next_stmt(D,S)] must refer to an open database
-** connection and in particular must not be a NULL pointer.
+** The [database connection] pointer D in a call to
+** [sqlite3_next_stmt(D,S)] must refer to an open database
+** connection and in particular must not be a NULL pointer.
*/
-sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
/*
-** CAPI3REF: Commit And Rollback Notification Callbacks {H12950} <S60400>
+** CAPI3REF: Commit And Rollback Notification Callbacks
+** METHOD: sqlite3
**
-** The sqlite3_commit_hook() interface registers a callback
-** function to be invoked whenever a transaction is committed.
-** Any callback set by a previous call to sqlite3_commit_hook()
+** ^The sqlite3_commit_hook() interface registers a callback
+** function to be invoked whenever a transaction is [COMMIT | committed].
+** ^Any callback set by a previous call to sqlite3_commit_hook()
** for the same database connection is overridden.
-** The sqlite3_rollback_hook() interface registers a callback
-** function to be invoked whenever a transaction is committed.
-** Any callback set by a previous call to sqlite3_commit_hook()
+** ^The sqlite3_rollback_hook() interface registers a callback
+** function to be invoked whenever a transaction is [ROLLBACK | rolled back].
+** ^Any callback set by a previous call to sqlite3_rollback_hook()
** for the same database connection is overridden.
-** The pArg argument is passed through to the callback.
-** If the callback on a commit hook function returns non-zero,
+** ^The pArg argument is passed through to the callback.
+** ^If the callback on a commit hook function returns non-zero,
** then the commit is converted into a rollback.
**
-** If another function was previously registered, its
-** pArg value is returned. Otherwise NULL is returned.
-**
-** Registering a NULL function disables the callback.
-**
-** For the purposes of this API, a transaction is said to have been
+** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions
+** return the P argument from the previous call of the same function
+** on the same [database connection] D, or NULL for
+** the first call for each function on D.
+**
+** The commit and rollback hook callbacks are not reentrant.
+** The callback implementation must not do anything that will modify
+** the database connection that invoked the callback. Any actions
+** to modify the database connection must be deferred until after the
+** completion of the [sqlite3_step()] call that triggered the commit
+** or rollback hook in the first place.
+** Note that running any other SQL statements, including SELECT statements,
+** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify
+** the database connections for the meaning of "modify" in this paragraph.
+**
+** ^Registering a NULL function disables the callback.
+**
+** ^When the commit hook callback routine returns zero, the [COMMIT]
+** operation is allowed to continue normally. ^If the commit hook
+** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK].
+** ^The rollback hook is invoked on a rollback that results from a commit
+** hook returning non-zero, just as it would be with any other rollback.
+**
+** ^For the purposes of this API, a transaction is said to have been
** rolled back if an explicit "ROLLBACK" statement is executed, or
** an error or constraint causes an implicit rollback to occur.
-** The rollback callback is not invoked if a transaction is
+** ^The rollback callback is not invoked if a transaction is
** automatically rolled back because the database connection is closed.
-** The rollback callback is not invoked if a transaction is
-** rolled back because a commit callback returned non-zero.
-** <todo> Check on this </todo>
-**
-** INVARIANTS:
**
-** {H12951} The [sqlite3_commit_hook(D,F,P)] interface registers the
-** callback function F to be invoked with argument P whenever
-** a transaction commits on the [database connection] D.
-**
-** {H12952} The [sqlite3_commit_hook(D,F,P)] interface returns the P argument
-** from the previous call with the same [database connection] D,
-** or NULL on the first call for a particular database connection D.
-**
-** {H12953} Each call to [sqlite3_commit_hook()] overwrites the callback
-** registered by prior calls.
-**
-** {H12954} If the F argument to [sqlite3_commit_hook(D,F,P)] is NULL
-** then the commit hook callback is canceled and no callback
-** is invoked when a transaction commits.
-**
-** {H12955} If the commit callback returns non-zero then the commit is
-** converted into a rollback.
-**
-** {H12961} The [sqlite3_rollback_hook(D,F,P)] interface registers the
-** callback function F to be invoked with argument P whenever
-** a transaction rolls back on the [database connection] D.
-**
-** {H12962} The [sqlite3_rollback_hook(D,F,P)] interface returns the P
-** argument from the previous call with the same
-** [database connection] D, or NULL on the first call
-** for a particular database connection D.
-**
-** {H12963} Each call to [sqlite3_rollback_hook()] overwrites the callback
-** registered by prior calls.
-**
-** {H12964} If the F argument to [sqlite3_rollback_hook(D,F,P)] is NULL
-** then the rollback hook callback is canceled and no callback
-** is invoked when a transaction rolls back.
+** See also the [sqlite3_update_hook()] interface.
*/
-void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
+SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
+SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
/*
-** CAPI3REF: Data Change Notification Callbacks {H12970} <S60400>
+** CAPI3REF: Data Change Notification Callbacks
+** METHOD: sqlite3
**
-** The sqlite3_update_hook() interface registers a callback function
+** ^The sqlite3_update_hook() interface registers a callback function
** with the [database connection] identified by the first argument
-** to be invoked whenever a row is updated, inserted or deleted.
-** Any callback set by a previous call to this function
+** to be invoked whenever a row is updated, inserted or deleted in
+** a [rowid table].
+** ^Any callback set by a previous call to this function
** for the same database connection is overridden.
**
-** The second argument is a pointer to the function to invoke when a
-** row is updated, inserted or deleted.
-** The first argument to the callback is a copy of the third argument
+** ^The second argument is a pointer to the function to invoke when a
+** row is updated, inserted or deleted in a rowid table.
+** ^The first argument to the callback is a copy of the third argument
** to sqlite3_update_hook().
-** The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
+** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
** or [SQLITE_UPDATE], depending on the operation that caused the callback
** to be invoked.
-** The third and fourth arguments to the callback contain pointers to the
+** ^The third and fourth arguments to the callback contain pointers to the
** database and table name containing the affected row.
-** The final callback parameter is the rowid of the row. In the case of
-** an update, this is the rowid after the update takes place.
-**
-** The update hook is not invoked when internal system tables are
-** modified (i.e. sqlite_master and sqlite_sequence).
-**
-** If another function was previously registered, its pArg value
-** is returned. Otherwise NULL is returned.
-**
-** INVARIANTS:
-**
-** {H12971} The [sqlite3_update_hook(D,F,P)] interface causes the callback
-** function F to be invoked with first parameter P whenever
-** a table row is modified, inserted, or deleted on
-** the [database connection] D.
-**
-** {H12973} The [sqlite3_update_hook(D,F,P)] interface returns the value
-** of P for the previous call on the same [database connection] D,
-** or NULL for the first call.
-**
-** {H12975} If the update hook callback F in [sqlite3_update_hook(D,F,P)]
-** is NULL then the no update callbacks are made.
-**
-** {H12977} Each call to [sqlite3_update_hook(D,F,P)] overrides prior calls
-** to the same interface on the same [database connection] D.
-**
-** {H12979} The update hook callback is not invoked when internal system
-** tables such as sqlite_master and sqlite_sequence are modified.
-**
-** {H12981} The second parameter to the update callback
-** is one of [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE],
-** depending on the operation that caused the callback to be invoked.
-**
-** {H12983} The third and fourth arguments to the callback contain pointers
-** to zero-terminated UTF-8 strings which are the names of the
-** database and table that is being updated.
-
-** {H12985} The final callback parameter is the rowid of the row after
-** the change occurs.
-*/
-void *sqlite3_update_hook(
+** ^The final callback parameter is the [rowid] of the row.
+** ^In the case of an update, this is the [rowid] after the update takes place.
+**
+** ^(The update hook is not invoked when internal system tables are
+** modified (i.e. sqlite_master and sqlite_sequence).)^
+** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified.
+**
+** ^In the current implementation, the update hook
+** is not invoked when conflicting rows are deleted because of an
+** [ON CONFLICT | ON CONFLICT REPLACE] clause. ^Nor is the update hook
+** invoked when rows are deleted using the [truncate optimization].
+** The exceptions defined in this paragraph might change in a future
+** release of SQLite.
+**
+** The update hook implementation must not do anything that will modify
+** the database connection that invoked the update hook. Any actions
+** to modify the database connection must be deferred until after the
+** completion of the [sqlite3_step()] call that triggered the update hook.
+** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
+** database connections for the meaning of "modify" in this paragraph.
+**
+** ^The sqlite3_update_hook(D,C,P) function
+** returns the P argument from the previous call
+** on the same [database connection] D, or NULL for
+** the first call on D.
+**
+** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
+** and [sqlite3_preupdate_hook()] interfaces.
+*/
+SQLITE_API void *sqlite3_update_hook(
sqlite3*,
void(*)(void *,int ,char const *,char const *,sqlite3_int64),
void*
);
/*
-** CAPI3REF: Enable Or Disable Shared Pager Cache {H10330} <S30900>
-** KEYWORDS: {shared cache} {shared cache mode}
+** CAPI3REF: Enable Or Disable Shared Pager Cache
**
-** This routine enables or disables the sharing of the database cache
+** ^(This routine enables or disables the sharing of the database cache
** and schema data structures between [database connection | connections]
** to the same database. Sharing is enabled if the argument is true
-** and disabled if the argument is false.
+** and disabled if the argument is false.)^
**
-** Cache sharing is enabled and disabled for an entire process. {END}
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
+** ^Cache sharing is enabled and disabled for an entire process.
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]).
+** In prior versions of SQLite,
** sharing was enabled or disabled for each thread separately.
**
-** The cache sharing mode set by this interface effects all subsequent
+** ^(The cache sharing mode set by this interface effects all subsequent
** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
** Existing database connections continue use the sharing mode
-** that was in effect at the time they were opened.
+** that was in effect at the time they were opened.)^
**
-** Virtual tables cannot be used with a shared cache. When shared
-** cache is enabled, the [sqlite3_create_module()] API used to register
-** virtual tables will always return an error.
+** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled
+** successfully. An [error code] is returned otherwise.)^
**
-** This routine returns [SQLITE_OK] if shared cache was enabled or disabled
-** successfully. An [error code] is returned otherwise.
-**
-** Shared cache is disabled by default. But this might change in
+** ^Shared cache is disabled by default. But this might change in
** future releases of SQLite. Applications that care about shared
** cache setting should set it explicitly.
**
-** INVARIANTS:
-**
-** {H10331} A successful invocation of [sqlite3_enable_shared_cache(B)]
-** will enable or disable shared cache mode for any subsequently
-** created [database connection] in the same process.
+** Note: This method is disabled on MacOS X 10.7 and iOS version 5.0
+** and will always return SQLITE_MISUSE. On those systems,
+** shared cache mode should be enabled per-database connection via
+** [sqlite3_open_v2()] with [SQLITE_OPEN_SHAREDCACHE].
**
-** {H10336} When shared cache is enabled, the [sqlite3_create_module()]
-** interface will always return an error.
+** This interface is threadsafe on processors where writing a
+** 32-bit integer is atomic.
**
-** {H10337} The [sqlite3_enable_shared_cache(B)] interface returns
-** [SQLITE_OK] if shared cache was enabled or disabled successfully.
-**
-** {H10339} Shared cache is disabled by default.
+** See Also: [SQLite Shared-Cache Mode]
*/
-int sqlite3_enable_shared_cache(int);
+SQLITE_API int sqlite3_enable_shared_cache(int);
/*
-** CAPI3REF: Attempt To Free Heap Memory {H17340} <S30220>
+** CAPI3REF: Attempt To Free Heap Memory
**
-** The sqlite3_release_memory() interface attempts to free N bytes
+** ^The sqlite3_release_memory() interface attempts to free N bytes
** of heap memory by deallocating non-essential memory allocations
-** held by the database library. {END} Memory used to cache database
+** held by the database library. Memory used to cache database
** pages to improve performance is an example of non-essential memory.
-** sqlite3_release_memory() returns the number of bytes actually freed,
+** ^sqlite3_release_memory() returns the number of bytes actually freed,
** which might be more or less than the amount requested.
+** ^The sqlite3_release_memory() routine is a no-op returning zero
+** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT].
**
-** INVARIANTS:
-**
-** {H17341} The [sqlite3_release_memory(N)] interface attempts to
-** free N bytes of heap memory by deallocating non-essential
-** memory allocations held by the database library.
-**
-** {H16342} The [sqlite3_release_memory(N)] returns the number
-** of bytes actually freed, which might be more or less
-** than the amount requested.
+** See also: [sqlite3_db_release_memory()]
*/
-int sqlite3_release_memory(int);
+SQLITE_API int sqlite3_release_memory(int);
/*
-** CAPI3REF: Impose A Limit On Heap Size {H17350} <S30220>
-**
-** The sqlite3_soft_heap_limit() interface places a "soft" limit
-** on the amount of heap memory that may be allocated by SQLite.
-** If an internal allocation is requested that would exceed the
-** soft heap limit, [sqlite3_release_memory()] is invoked one or
-** more times to free up some space before the allocation is performed.
-**
-** The limit is called "soft", because if [sqlite3_release_memory()]
-** cannot free sufficient memory to prevent the limit from being exceeded,
-** the memory is allocated anyway and the current operation proceeds.
-**
-** A negative or zero value for N means that there is no soft heap limit and
-** [sqlite3_release_memory()] will only be called when memory is exhausted.
-** The default value for the soft heap limit is zero.
+** CAPI3REF: Free Memory Used By A Database Connection
+** METHOD: sqlite3
**
-** SQLite makes a best effort to honor the soft heap limit.
-** But if the soft heap limit cannot be honored, execution will
-** continue without error or notification. This is why the limit is
-** called a "soft" limit. It is advisory only.
+** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap
+** memory as possible from database connection D. Unlike the
+** [sqlite3_release_memory()] interface, this interface is in effect even
+** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is
+** omitted.
**
-** Prior to SQLite version 3.5.0, this routine only constrained the memory
-** allocated by a single thread - the same thread in which this routine
-** runs. Beginning with SQLite version 3.5.0, the soft heap limit is
-** applied to all threads. The value specified for the soft heap limit
-** is an upper bound on the total memory allocation for all threads. In
-** version 3.5.0 there is no mechanism for limiting the heap usage for
-** individual threads.
-**
-** INVARIANTS:
+** See also: [sqlite3_release_memory()]
+*/
+SQLITE_API int sqlite3_db_release_memory(sqlite3*);
+
+/*
+** CAPI3REF: Impose A Limit On Heap Size
**
-** {H16351} The [sqlite3_soft_heap_limit(N)] interface places a soft limit
-** of N bytes on the amount of heap memory that may be allocated
-** using [sqlite3_malloc()] or [sqlite3_realloc()] at any point
-** in time.
+** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the
+** soft limit on the amount of heap memory that may be allocated by SQLite.
+** ^SQLite strives to keep heap memory utilization below the soft heap
+** limit by reducing the number of pages held in the page cache
+** as heap memory usages approaches the limit.
+** ^The soft heap limit is "soft" because even though SQLite strives to stay
+** below the limit, it will exceed the limit rather than generate
+** an [SQLITE_NOMEM] error. In other words, the soft heap limit
+** is advisory only.
**
-** {H16352} If a call to [sqlite3_malloc()] or [sqlite3_realloc()] would
-** cause the total amount of allocated memory to exceed the
-** soft heap limit, then [sqlite3_release_memory()] is invoked
-** in an attempt to reduce the memory usage prior to proceeding
-** with the memory allocation attempt.
+** ^The return value from sqlite3_soft_heap_limit64() is the size of
+** the soft heap limit prior to the call, or negative in the case of an
+** error. ^If the argument N is negative
+** then no change is made to the soft heap limit. Hence, the current
+** size of the soft heap limit can be determined by invoking
+** sqlite3_soft_heap_limit64() with a negative argument.
**
-** {H16353} Calls to [sqlite3_malloc()] or [sqlite3_realloc()] that trigger
-** attempts to reduce memory usage through the soft heap limit
-** mechanism continue even if the attempt to reduce memory
-** usage is unsuccessful.
+** ^If the argument N is zero then the soft heap limit is disabled.
**
-** {H16354} A negative or zero value for N in a call to
-** [sqlite3_soft_heap_limit(N)] means that there is no soft
-** heap limit and [sqlite3_release_memory()] will only be
-** called when memory is completely exhausted.
+** ^(The soft heap limit is not enforced in the current implementation
+** if one or more of following conditions are true:
**
-** {H16355} The default value for the soft heap limit is zero.
+** <ul>
+** <li> The soft heap limit is set to zero.
+** <li> Memory accounting is disabled using a combination of the
+** [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and
+** the [SQLITE_DEFAULT_MEMSTATUS] compile-time option.
+** <li> An alternative page cache implementation is specified using
+** [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...).
+** <li> The page cache allocates from its own memory pool supplied
+** by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than
+** from the heap.
+** </ul>)^
+**
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]),
+** the soft heap limit is enforced
+** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
+** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
+** the soft heap limit is enforced on every memory allocation. Without
+** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced
+** when memory is allocated by the page cache. Testing suggests that because
+** the page cache is the predominate memory user in SQLite, most
+** applications will achieve adequate soft heap limit enforcement without
+** the use of [SQLITE_ENABLE_MEMORY_MANAGEMENT].
+**
+** The circumstances under which SQLite will enforce the soft heap limit may
+** changes in future releases of SQLite.
+*/
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
+
+/*
+** CAPI3REF: Deprecated Soft Heap Limit Interface
+** DEPRECATED
**
-** {H16358} Each call to [sqlite3_soft_heap_limit(N)] overrides the
-** values set by all prior calls.
+** This is a deprecated version of the [sqlite3_soft_heap_limit64()]
+** interface. This routine is provided for historical compatibility
+** only. All new applications should use the
+** [sqlite3_soft_heap_limit64()] interface rather than this one.
*/
-void sqlite3_soft_heap_limit(int);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
+
/*
-** CAPI3REF: Extract Metadata About A Column Of A Table {H12850} <S60300>
+** CAPI3REF: Extract Metadata About A Column Of A Table
+** METHOD: sqlite3
**
-** This routine returns metadata about a specific column of a specific
-** database table accessible using the [database connection] handle
-** passed as the first function argument.
+** ^(The sqlite3_table_column_metadata(X,D,T,C,....) routine returns
+** information about column C of table T in database D
+** on [database connection] X.)^ ^The sqlite3_table_column_metadata()
+** interface returns SQLITE_OK and fills in the non-NULL pointers in
+** the final five arguments with appropriate values if the specified
+** column exists. ^The sqlite3_table_column_metadata() interface returns
+** SQLITE_ERROR and if the specified column does not exist.
+** ^If the column-name parameter to sqlite3_table_column_metadata() is a
+** NULL pointer, then this routine simply checks for the existence of the
+** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it
+** does not. If the table name parameter T in a call to
+** sqlite3_table_column_metadata(X,D,T,C,...) is NULL then the result is
+** undefined behavior.
**
-** The column is identified by the second, third and fourth parameters to
-** this function. The second parameter is either the name of the database
-** (i.e. "main", "temp" or an attached database) containing the specified
-** table or NULL. If it is NULL, then all attached databases are searched
+** ^The column is identified by the second, third and fourth parameters to
+** this function. ^(The second parameter is either the name of the database
+** (i.e. "main", "temp", or an attached database) containing the specified
+** table or NULL.)^ ^If it is NULL, then all attached databases are searched
** for the table using the same algorithm used by the database engine to
** resolve unqualified table references.
**
-** The third and fourth parameters to this function are the table and column
-** name of the desired column, respectively. Neither of these parameters
-** may be NULL.
+** ^The third and fourth parameters to this function are the table and column
+** name of the desired column, respectively.
**
-** Metadata is returned by writing to the memory locations passed as the 5th
-** and subsequent parameters to this function. Any of these arguments may be
+** ^Metadata is returned by writing to the memory locations passed as the 5th
+** and subsequent parameters to this function. ^Any of these arguments may be
** NULL, in which case the corresponding element of metadata is omitted.
**
-** <blockquote>
** <table border="1">
** <tr><th> Parameter <th> Output<br>Type <th> Description
**
** <tr><td> 6th <td> const char* <td> Name of default collation sequence
** <tr><td> 7th <td> int <td> True if column has a NOT NULL constraint
** <tr><td> 8th <td> int <td> True if column is part of the PRIMARY KEY
-** <tr><td> 9th <td> int <td> True if column is AUTOINCREMENT
+** <tr><td> 9th <td> int <td> True if column is [AUTOINCREMENT]
** </table>
-** </blockquote>
+** </blockquote>)^
**
-** The memory pointed to by the character pointers returned for the
-** declaration type and collation sequence is valid only until the next
+** ^The memory pointed to by the character pointers returned for the
+** declaration type and collation sequence is valid until the next
** call to any SQLite API function.
**
-** If the specified table is actually a view, an [error code] is returned.
+** ^If the specified table is actually a view, an [error code] is returned.
**
-** If the specified column is "rowid", "oid" or "_rowid_" and an
-** INTEGER PRIMARY KEY column has been explicitly declared, then the output
-** parameters are set for the explicitly declared column. If there is no
-** explicitly declared INTEGER PRIMARY KEY column, then the output
-** parameters are set as follows:
+** ^If the specified column is "rowid", "oid" or "_rowid_" and the table
+** is not a [WITHOUT ROWID] table and an
+** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output
+** parameters are set for the explicitly declared column. ^(If there is no
+** [INTEGER PRIMARY KEY] column, then the outputs
+** for the [rowid] are set as follows:
**
** <pre>
** data type: "INTEGER"
** not null: 0
** primary key: 1
** auto increment: 0
-** </pre>
+** </pre>)^
**
-** This function may load one or more schemas from database files. If an
-** error occurs during this process, or if the requested table or column
-** cannot be found, an [error code] is returned and an error message left
-** in the [database connection] (to be retrieved using sqlite3_errmsg()).
-**
-** This API is only available if the library was compiled with the
-** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined.
+** ^This function causes all database schemas to be read from disk and
+** parsed, if that has not already been done, and returns an error if
+** any errors are encountered while loading the schema.
*/
-int sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
sqlite3 *db, /* Connection handle */
const char *zDbName, /* Database name or NULL */
const char *zTableName, /* Table name */
);
/*
-** CAPI3REF: Load An Extension {H12600} <S20500>
-**
-** This interface loads an SQLite extension library from the named file.
-**
-** {H12601} The sqlite3_load_extension() interface attempts to load an
-** SQLite extension library contained in the file zFile.
-**
-** {H12602} The entry point is zProc.
-**
-** {H12603} zProc may be 0, in which case the name of the entry point
-** defaults to "sqlite3_extension_init".
-**
-** {H12604} The sqlite3_load_extension() interface shall return
-** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
-**
-** {H12605} If an error occurs and pzErrMsg is not 0, then the
-** [sqlite3_load_extension()] interface shall attempt to
-** fill *pzErrMsg with error message text stored in memory
-** obtained from [sqlite3_malloc()]. {END} The calling function
-** should free this memory by calling [sqlite3_free()].
-**
-** {H12606} Extension loading must be enabled using
-** [sqlite3_enable_load_extension()] prior to calling this API,
-** otherwise an error will be returned.
-*/
-int sqlite3_load_extension(
+** CAPI3REF: Load An Extension
+** METHOD: sqlite3
+**
+** ^This interface loads an SQLite extension library from the named file.
+**
+** ^The sqlite3_load_extension() interface attempts to load an
+** [SQLite extension] library contained in the file zFile. If
+** the file cannot be loaded directly, attempts are made to load
+** with various operating-system specific extensions added.
+** So for example, if "samplelib" cannot be loaded, then names like
+** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might
+** be tried also.
+**
+** ^The entry point is zProc.
+** ^(zProc may be 0, in which case SQLite will try to come up with an
+** entry point name on its own. It first tries "sqlite3_extension_init".
+** If that does not work, it constructs a name "sqlite3_X_init" where the
+** X is consists of the lower-case equivalent of all ASCII alphabetic
+** characters in the filename from the last "/" to the first following
+** "." and omitting any initial "lib".)^
+** ^The sqlite3_load_extension() interface returns
+** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
+** ^If an error occurs and pzErrMsg is not 0, then the
+** [sqlite3_load_extension()] interface shall attempt to
+** fill *pzErrMsg with error message text stored in memory
+** obtained from [sqlite3_malloc()]. The calling function
+** should free this memory by calling [sqlite3_free()].
+**
+** ^Extension loading must be enabled using
+** [sqlite3_enable_load_extension()] or
+** [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],1,NULL)
+** prior to calling this API,
+** otherwise an error will be returned.
+**
+** <b>Security warning:</b> It is recommended that the
+** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
+** interface. The use of the [sqlite3_enable_load_extension()] interface
+** should be avoided. This will keep the SQL function [load_extension()]
+** disabled and prevent SQL injections from giving attackers
+** access to extension loading capabilities.
+**
+** See also the [load_extension() SQL function].
+*/
+SQLITE_API int sqlite3_load_extension(
sqlite3 *db, /* Load the extension into this database connection */
const char *zFile, /* Name of the shared library containing extension */
const char *zProc, /* Entry point. Derived from zFile if 0 */
);
/*
-** CAPI3REF: Enable Or Disable Extension Loading {H12620} <S20500>
+** CAPI3REF: Enable Or Disable Extension Loading
+** METHOD: sqlite3
**
-** So as not to open security holes in older applications that are
-** unprepared to deal with extension loading, and as a means of disabling
-** extension loading while evaluating user-entered SQL, the following API
+** ^So as not to open security holes in older applications that are
+** unprepared to deal with [extension loading], and as a means of disabling
+** [extension loading] while evaluating user-entered SQL, the following API
** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
**
-** Extension loading is off by default. See ticket #1863.
+** ^Extension loading is off by default.
+** ^Call the sqlite3_enable_load_extension() routine with onoff==1
+** to turn extension loading on and call it with onoff==0 to turn
+** it back off again.
**
-** {H12621} Call the sqlite3_enable_load_extension() routine with onoff==1
-** to turn extension loading on and call it with onoff==0 to turn
-** it back off again.
+** ^This interface enables or disables both the C-API
+** [sqlite3_load_extension()] and the SQL function [load_extension()].
+** ^(Use [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],..)
+** to enable or disable only the C-API.)^
**
-** {H12622} Extension loading is off by default.
+** <b>Security warning:</b> It is recommended that extension loading
+** be disabled using the [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method
+** rather than this interface, so the [load_extension()] SQL function
+** remains disabled. This will prevent SQL injections from giving attackers
+** access to extension loading capabilities.
*/
-int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
/*
-** CAPI3REF: Automatically Load An Extensions {H12640} <S20500>
+** CAPI3REF: Automatically Load Statically Linked Extensions
**
-** This API can be invoked at program startup in order to register
-** one or more statically linked extensions that will be available
-** to all new [database connections]. {END}
+** ^This interface causes the xEntryPoint() function to be invoked for
+** each new [database connection] that is created. The idea here is that
+** xEntryPoint() is the entry point for a statically linked [SQLite extension]
+** that is to be automatically loaded into all new database connections.
**
-** This routine stores a pointer to the extension in an array that is
-** obtained from [sqlite3_malloc()]. If you run a memory leak checker
-** on your program and it reports a leak because of this array, invoke
-** [sqlite3_reset_auto_extension()] prior to shutdown to free the memory.
+** ^(Even though the function prototype shows that xEntryPoint() takes
+** no arguments and returns void, SQLite invokes xEntryPoint() with three
+** arguments and expects an integer result as if the signature of the
+** entry point where as follows:
**
-** {H12641} This function registers an extension entry point that is
-** automatically invoked whenever a new [database connection]
-** is opened using [sqlite3_open()], [sqlite3_open16()],
-** or [sqlite3_open_v2()].
+** <blockquote><pre>
+** int xEntryPoint(
+** sqlite3 *db,
+** const char **pzErrMsg,
+** const struct sqlite3_api_routines *pThunk
+** );
+** </pre></blockquote>)^
**
-** {H12642} Duplicate extensions are detected so calling this routine
-** multiple times with the same extension is harmless.
+** If the xEntryPoint routine encounters an error, it should make *pzErrMsg
+** point to an appropriate error message (obtained from [sqlite3_mprintf()])
+** and return an appropriate [error code]. ^SQLite ensures that *pzErrMsg
+** is NULL before calling the xEntryPoint(). ^SQLite will invoke
+** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns. ^If any
+** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()],
+** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail.
**
-** {H12643} This routine stores a pointer to the extension in an array
-** that is obtained from [sqlite3_malloc()].
+** ^Calling sqlite3_auto_extension(X) with an entry point X that is already
+** on the list of automatic extensions is a harmless no-op. ^No entry point
+** will be called more than once for each database connection that is opened.
**
-** {H12644} Automatic extensions apply across all threads.
+** See also: [sqlite3_reset_auto_extension()]
+** and [sqlite3_cancel_auto_extension()]
*/
-int sqlite3_auto_extension(void *xEntryPoint);
+SQLITE_API int sqlite3_auto_extension(void(*xEntryPoint)(void));
/*
-** CAPI3REF: Reset Automatic Extension Loading {H12660} <S20500>
-**
-** This function disables all previously registered automatic
-** extensions. {END} It undoes the effect of all prior
-** [sqlite3_auto_extension()] calls.
-**
-** {H12661} This function disables all previously registered
-** automatic extensions.
+** CAPI3REF: Cancel Automatic Extension Loading
**
-** {H12662} This function disables automatic extensions in all threads.
+** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the
+** initialization routine X that was registered using a prior call to
+** [sqlite3_auto_extension(X)]. ^The [sqlite3_cancel_auto_extension(X)]
+** routine returns 1 if initialization routine X was successfully
+** unregistered and it returns 0 if X was not on the list of initialization
+** routines.
*/
-void sqlite3_reset_auto_extension(void);
+SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
/*
-****** EXPERIMENTAL - subject to change without notice **************
+** CAPI3REF: Reset Automatic Extension Loading
**
+** ^This interface disables all automatic extensions previously
+** registered using [sqlite3_auto_extension()].
+*/
+SQLITE_API void sqlite3_reset_auto_extension(void);
+
+/*
** The interface to the virtual-table mechanism is currently considered
** to be experimental. The interface might change in incompatible ways.
** If this is a problem for you, do not use the interface at this time.
typedef struct sqlite3_module sqlite3_module;
/*
-** CAPI3REF: Virtual Table Object {H18000} <S20400>
-** KEYWORDS: sqlite3_module
-** EXPERIMENTAL
+** CAPI3REF: Virtual Table Object
+** KEYWORDS: sqlite3_module {virtual table module}
**
-** A module is a class of virtual tables. Each module is defined
-** by an instance of the following structure. This structure consists
-** mostly of methods for the module.
+** This structure, sometimes called a "virtual table module",
+** defines the implementation of a [virtual tables].
+** This structure consists mostly of methods for the module.
**
-** This interface is experimental and is subject to change or
-** removal in future releases of SQLite.
+** ^A virtual table module is created by filling in a persistent
+** instance of this structure and passing a pointer to that instance
+** to [sqlite3_create_module()] or [sqlite3_create_module_v2()].
+** ^The registration remains valid until it is replaced by a different
+** module or until the [database connection] closes. The content
+** of this structure must not change while it is registered with
+** any database connection.
*/
struct sqlite3_module {
int iVersion;
void (**pxFunc)(sqlite3_context*,int,sqlite3_value**),
void **ppArg);
int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
+ /* The methods above are in version 1 of the sqlite_module object. Those
+ ** below are for version 2 and greater. */
+ int (*xSavepoint)(sqlite3_vtab *pVTab, int);
+ int (*xRelease)(sqlite3_vtab *pVTab, int);
+ int (*xRollbackTo)(sqlite3_vtab *pVTab, int);
};
/*
-** CAPI3REF: Virtual Table Indexing Information {H18100} <S20400>
+** CAPI3REF: Virtual Table Indexing Information
** KEYWORDS: sqlite3_index_info
-** EXPERIMENTAL
**
-** The sqlite3_index_info structure and its substructures is used to
-** pass information into and receive the reply from the xBestIndex
-** method of an sqlite3_module. The fields under **Inputs** are the
+** The sqlite3_index_info structure and its substructures is used as part
+** of the [virtual table] interface to
+** pass information into and receive the reply from the [xBestIndex]
+** method of a [virtual table module]. The fields under **Inputs** are the
** inputs to xBestIndex and are read-only. xBestIndex inserts its
** results into the **Outputs** fields.
**
-** The aConstraint[] array records WHERE clause constraints of the form:
+** ^(The aConstraint[] array records WHERE clause constraints of the form:
**
-** <pre>column OP expr</pre>
+** <blockquote>column OP expr</blockquote>
**
-** where OP is =, <, <=, >, or >=. The particular operator is
-** stored in aConstraint[].op. The index of the column is stored in
-** aConstraint[].iColumn. aConstraint[].usable is TRUE if the
+** where OP is =, <, <=, >, or >=.)^ ^(The particular operator is
+** stored in aConstraint[].op using one of the
+** [SQLITE_INDEX_CONSTRAINT_EQ | SQLITE_INDEX_CONSTRAINT_ values].)^
+** ^(The index of the column is stored in
+** aConstraint[].iColumn.)^ ^(aConstraint[].usable is TRUE if the
** expr on the right-hand side can be evaluated (and thus the constraint
-** is usable) and false if it cannot.
+** is usable) and false if it cannot.)^
**
-** The optimizer automatically inverts terms of the form "expr OP column"
+** ^The optimizer automatically inverts terms of the form "expr OP column"
** and makes other simplifications to the WHERE clause in an attempt to
** get as many WHERE clause terms into the form shown above as possible.
-** The aConstraint[] array only reports WHERE clause terms in the correct
-** form that refer to the particular virtual table being queried.
-**
-** Information about the ORDER BY clause is stored in aOrderBy[].
-** Each term of aOrderBy records a column of the ORDER BY clause.
-**
-** The xBestIndex method must fill aConstraintUsage[] with information
-** about what parameters to pass to xFilter. If argvIndex>0 then
+** ^The aConstraint[] array only reports WHERE clause terms that are
+** relevant to the particular virtual table being queried.
+**
+** ^Information about the ORDER BY clause is stored in aOrderBy[].
+** ^Each term of aOrderBy records a column of the ORDER BY clause.
+**
+** The colUsed field indicates which columns of the virtual table may be
+** required by the current scan. Virtual table columns are numbered from
+** zero in the order in which they appear within the CREATE TABLE statement
+** passed to sqlite3_declare_vtab(). For the first 63 columns (columns 0-62),
+** the corresponding bit is set within the colUsed mask if the column may be
+** required by SQLite. If the table has at least 64 columns and any column
+** to the right of the first 63 is required, then bit 63 of colUsed is also
+** set. In other words, column iCol may be required if the expression
+** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
+** non-zero.
+**
+** The [xBestIndex] method must fill aConstraintUsage[] with information
+** about what parameters to pass to xFilter. ^If argvIndex>0 then
** the right-hand side of the corresponding aConstraint[] is evaluated
-** and becomes the argvIndex-th entry in argv. If aConstraintUsage[].omit
+** and becomes the argvIndex-th entry in argv. ^(If aConstraintUsage[].omit
** is true, then the constraint is assumed to be fully handled by the
-** virtual table and is not checked again by SQLite.
+** virtual table and is not checked again by SQLite.)^
**
-** The idxNum and idxPtr values are recorded and passed into xFilter.
-** sqlite3_free() is used to free idxPtr if needToFreeIdxPtr is true.
+** ^The idxNum and idxPtr values are recorded and passed into the
+** [xFilter] method.
+** ^[sqlite3_free()] is used to free idxPtr if and only if
+** needToFreeIdxPtr is true.
**
-** The orderByConsumed means that output from xFilter will occur in
+** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in
** the correct order to satisfy the ORDER BY clause so that no separate
** sorting step is required.
**
-** The estimatedCost value is an estimate of the cost of doing the
-** particular lookup. A full scan of a table with N entries should have
-** a cost of N. A binary search of a table of N entries should have a
-** cost of approximately log(N).
-**
-** This interface is experimental and is subject to change or
-** removal in future releases of SQLite.
+** ^The estimatedCost value is an estimate of the cost of a particular
+** strategy. A cost of N indicates that the cost of the strategy is similar
+** to a linear scan of an SQLite table with N rows. A cost of log(N)
+** indicates that the expense of the operation is similar to that of a
+** binary search on a unique indexed field of an SQLite table with N rows.
+**
+** ^The estimatedRows value is an estimate of the number of rows that
+** will be returned by the strategy.
+**
+** The xBestIndex method may optionally populate the idxFlags field with a
+** mask of SQLITE_INDEX_SCAN_* flags. Currently there is only one such flag -
+** SQLITE_INDEX_SCAN_UNIQUE. If the xBestIndex method sets this flag, SQLite
+** assumes that the strategy may visit at most one row.
+**
+** Additionally, if xBestIndex sets the SQLITE_INDEX_SCAN_UNIQUE flag, then
+** SQLite also assumes that if a call to the xUpdate() method is made as
+** part of the same statement to delete or update a virtual table row and the
+** implementation returns SQLITE_CONSTRAINT, then there is no need to rollback
+** any database changes. In other words, if the xUpdate() returns
+** SQLITE_CONSTRAINT, the database contents must be exactly as they were
+** before xUpdate was called. By contrast, if SQLITE_INDEX_SCAN_UNIQUE is not
+** set and xUpdate returns SQLITE_CONSTRAINT, any database changes made by
+** the xUpdate method are automatically rolled back by SQLite.
+**
+** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]).
+** If a virtual table extension is
+** used with an SQLite version earlier than 3.8.2, the results of attempting
+** to read or write the estimatedRows field are undefined (but are likely
+** to included crashing the application). The estimatedRows field should
+** therefore only be used if [sqlite3_libversion_number()] returns a
+** value greater than or equal to 3008002. Similarly, the idxFlags field
+** was added for [version 3.9.0] ([dateof:3.9.0]).
+** It may therefore only be used if
+** sqlite3_libversion_number() returns a value greater than or equal to
+** 3009000.
*/
struct sqlite3_index_info {
/* Inputs */
int nConstraint; /* Number of entries in aConstraint */
struct sqlite3_index_constraint {
- int iColumn; /* Column on left-hand side of constraint */
+ int iColumn; /* Column constrained. -1 for ROWID */
unsigned char op; /* Constraint operator */
unsigned char usable; /* True if this constraint is usable */
int iTermOffset; /* Used internally - xBestIndex should ignore */
char *idxStr; /* String, possibly obtained from sqlite3_malloc */
int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */
int orderByConsumed; /* True if output is already ordered */
- double estimatedCost; /* Estimated cost of using this index */
+ double estimatedCost; /* Estimated cost of using this index */
+ /* Fields below are only available in SQLite 3.8.2 and later */
+ sqlite3_int64 estimatedRows; /* Estimated number of rows returned */
+ /* Fields below are only available in SQLite 3.9.0 and later */
+ int idxFlags; /* Mask of SQLITE_INDEX_SCAN_* flags */
+ /* Fields below are only available in SQLite 3.10.0 and later */
+ sqlite3_uint64 colUsed; /* Input: Mask of columns used by statement */
};
-#define SQLITE_INDEX_CONSTRAINT_EQ 2
-#define SQLITE_INDEX_CONSTRAINT_GT 4
-#define SQLITE_INDEX_CONSTRAINT_LE 8
-#define SQLITE_INDEX_CONSTRAINT_LT 16
-#define SQLITE_INDEX_CONSTRAINT_GE 32
-#define SQLITE_INDEX_CONSTRAINT_MATCH 64
/*
-** CAPI3REF: Register A Virtual Table Implementation {H18200} <S20400>
-** EXPERIMENTAL
-**
-** This routine is used to register a new module name with a
-** [database connection]. Module names must be registered before
-** creating new virtual tables on the module, or before using
-** preexisting virtual tables of the module.
-**
-** This interface is experimental and is subject to change or
-** removal in future releases of SQLite.
-*/
-SQLITE_EXPERIMENTAL int sqlite3_create_module(
+** CAPI3REF: Virtual Table Scan Flags
+*/
+#define SQLITE_INDEX_SCAN_UNIQUE 1 /* Scan visits at most 1 row */
+
+/*
+** CAPI3REF: Virtual Table Constraint Operator Codes
+**
+** These macros defined the allowed values for the
+** [sqlite3_index_info].aConstraint[].op field. Each value represents
+** an operator that is part of a constraint term in the wHERE clause of
+** a query that uses a [virtual table].
+*/
+#define SQLITE_INDEX_CONSTRAINT_EQ 2
+#define SQLITE_INDEX_CONSTRAINT_GT 4
+#define SQLITE_INDEX_CONSTRAINT_LE 8
+#define SQLITE_INDEX_CONSTRAINT_LT 16
+#define SQLITE_INDEX_CONSTRAINT_GE 32
+#define SQLITE_INDEX_CONSTRAINT_MATCH 64
+#define SQLITE_INDEX_CONSTRAINT_LIKE 65
+#define SQLITE_INDEX_CONSTRAINT_GLOB 66
+#define SQLITE_INDEX_CONSTRAINT_REGEXP 67
+#define SQLITE_INDEX_CONSTRAINT_NE 68
+#define SQLITE_INDEX_CONSTRAINT_ISNOT 69
+#define SQLITE_INDEX_CONSTRAINT_ISNOTNULL 70
+#define SQLITE_INDEX_CONSTRAINT_ISNULL 71
+#define SQLITE_INDEX_CONSTRAINT_IS 72
+
+/*
+** CAPI3REF: Register A Virtual Table Implementation
+** METHOD: sqlite3
+**
+** ^These routines are used to register a new [virtual table module] name.
+** ^Module names must be registered before
+** creating a new [virtual table] using the module and before using a
+** preexisting [virtual table] for the module.
+**
+** ^The module name is registered on the [database connection] specified
+** by the first parameter. ^The name of the module is given by the
+** second parameter. ^The third parameter is a pointer to
+** the implementation of the [virtual table module]. ^The fourth
+** parameter is an arbitrary client data pointer that is passed through
+** into the [xCreate] and [xConnect] methods of the virtual table module
+** when a new virtual table is be being created or reinitialized.
+**
+** ^The sqlite3_create_module_v2() interface has a fifth parameter which
+** is a pointer to a destructor for the pClientData. ^SQLite will
+** invoke the destructor function (if it is not NULL) when SQLite
+** no longer needs the pClientData pointer. ^The destructor will also
+** be invoked if the call to sqlite3_create_module_v2() fails.
+** ^The sqlite3_create_module()
+** interface is equivalent to sqlite3_create_module_v2() with a NULL
+** destructor.
+*/
+SQLITE_API int sqlite3_create_module(
sqlite3 *db, /* SQLite connection to register module with */
const char *zName, /* Name of the module */
- const sqlite3_module *, /* Methods for the module */
- void * /* Client data for xCreate/xConnect */
+ const sqlite3_module *p, /* Methods for the module */
+ void *pClientData /* Client data for xCreate/xConnect */
);
-
-/*
-** CAPI3REF: Register A Virtual Table Implementation {H18210} <S20400>
-** EXPERIMENTAL
-**
-** This routine is identical to the [sqlite3_create_module()] method above,
-** except that it allows a destructor function to be specified. It is
-** even more experimental than the rest of the virtual tables API.
-*/
-SQLITE_EXPERIMENTAL int sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
sqlite3 *db, /* SQLite connection to register module with */
const char *zName, /* Name of the module */
- const sqlite3_module *, /* Methods for the module */
- void *, /* Client data for xCreate/xConnect */
+ const sqlite3_module *p, /* Methods for the module */
+ void *pClientData, /* Client data for xCreate/xConnect */
void(*xDestroy)(void*) /* Module destructor function */
);
/*
-** CAPI3REF: Virtual Table Instance Object {H18010} <S20400>
+** CAPI3REF: Virtual Table Instance Object
** KEYWORDS: sqlite3_vtab
-** EXPERIMENTAL
**
-** Every module implementation uses a subclass of the following structure
-** to describe a particular instance of the module. Each subclass will
+** Every [virtual table module] implementation uses a subclass
+** of this object to describe a particular instance
+** of the [virtual table]. Each subclass will
** be tailored to the specific needs of the module implementation.
** The purpose of this superclass is to define certain fields that are
** common to all module implementations.
**
-** Virtual tables methods can set an error message by assigning a
+** ^Virtual tables methods can set an error message by assigning a
** string obtained from [sqlite3_mprintf()] to zErrMsg. The method should
** take care that any prior string is freed by a call to [sqlite3_free()]
-** prior to assigning a new string to zErrMsg. After the error message
+** prior to assigning a new string to zErrMsg. ^After the error message
** is delivered up to the client application, the string will be automatically
-** freed by sqlite3_free() and the zErrMsg field will be zeroed. Note
-** that sqlite3_mprintf() and sqlite3_free() are used on the zErrMsg field
-** since virtual tables are commonly implemented in loadable extensions which
-** do not have access to sqlite3MPrintf() or sqlite3Free().
-**
-** This interface is experimental and is subject to change or
-** removal in future releases of SQLite.
+** freed by sqlite3_free() and the zErrMsg field will be zeroed.
*/
struct sqlite3_vtab {
const sqlite3_module *pModule; /* The module for this virtual table */
- int nRef; /* Used internally */
+ int nRef; /* Number of open cursors */
char *zErrMsg; /* Error message from sqlite3_mprintf() */
/* Virtual table implementations will typically add additional fields */
};
/*
-** CAPI3REF: Virtual Table Cursor Object {H18020} <S20400>
-** KEYWORDS: sqlite3_vtab_cursor
-** EXPERIMENTAL
+** CAPI3REF: Virtual Table Cursor Object
+** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor}
**
-** Every module implementation uses a subclass of the following structure
-** to describe cursors that point into the virtual table and are used
+** Every [virtual table module] implementation uses a subclass of the
+** following structure to describe cursors that point into the
+** [virtual table] and are used
** to loop through the virtual table. Cursors are created using the
-** xOpen method of the module. Each module implementation will define
+** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed
+** by the [sqlite3_module.xClose | xClose] method. Cursors are used
+** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods
+** of the module. Each module implementation will define
** the content of a cursor structure to suit its own needs.
**
** This superclass exists in order to define fields of the cursor that
** are common to all implementations.
-**
-** This interface is experimental and is subject to change or
-** removal in future releases of SQLite.
*/
struct sqlite3_vtab_cursor {
sqlite3_vtab *pVtab; /* Virtual table of this cursor */
};
/*
-** CAPI3REF: Declare The Schema Of A Virtual Table {H18280} <S20400>
-** EXPERIMENTAL
+** CAPI3REF: Declare The Schema Of A Virtual Table
**
-** The xCreate and xConnect methods of a module use the following API
+** ^The [xCreate] and [xConnect] methods of a
+** [virtual table module] call this interface
** to declare the format (the names and datatypes of the columns) of
** the virtual tables they implement.
-**
-** This interface is experimental and is subject to change or
-** removal in future releases of SQLite.
*/
-SQLITE_EXPERIMENTAL int sqlite3_declare_vtab(sqlite3*, const char *zCreateTable);
+SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
/*
-** CAPI3REF: Overload A Function For A Virtual Table {H18300} <S20400>
-** EXPERIMENTAL
+** CAPI3REF: Overload A Function For A Virtual Table
+** METHOD: sqlite3
**
-** Virtual tables can provide alternative implementations of functions
-** using the xFindFunction method. But global versions of those functions
-** must exist in order to be overloaded.
+** ^(Virtual tables can provide alternative implementations of functions
+** using the [xFindFunction] method of the [virtual table module].
+** But global versions of those functions
+** must exist in order to be overloaded.)^
**
-** This API makes sure a global version of a function with a particular
+** ^(This API makes sure a global version of a function with a particular
** name and number of parameters exists. If no such function exists
-** before this API is called, a new function is created. The implementation
+** before this API is called, a new function is created.)^ ^The implementation
** of the new function always causes an exception to be thrown. So
** the new function is not good for anything by itself. Its only
** purpose is to be a placeholder function that can be overloaded
-** by virtual tables.
-**
-** This API should be considered part of the virtual table interface,
-** which is experimental and subject to change.
+** by a [virtual table].
*/
-SQLITE_EXPERIMENTAL int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
+SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
/*
** The interface to the virtual-table mechanism defined above (back up
**
** When the virtual-table mechanism stabilizes, we will declare the
** interface fixed, support it indefinitely, and remove this comment.
-**
-****** EXPERIMENTAL - subject to change without notice **************
*/
/*
-** CAPI3REF: A Handle To An Open BLOB {H17800} <S30230>
+** CAPI3REF: A Handle To An Open BLOB
** KEYWORDS: {BLOB handle} {BLOB handles}
**
** An instance of this object represents an open BLOB on which
** [sqlite3_blob_open | incremental BLOB I/O] can be performed.
-** Objects of this type are created by [sqlite3_blob_open()]
+** ^Objects of this type are created by [sqlite3_blob_open()]
** and destroyed by [sqlite3_blob_close()].
-** The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
+** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
** can be used to read or write small subsections of the BLOB.
-** The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes.
+** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes.
*/
typedef struct sqlite3_blob sqlite3_blob;
/*
-** CAPI3REF: Open A BLOB For Incremental I/O {H17810} <S30230>
+** CAPI3REF: Open A BLOB For Incremental I/O
+** METHOD: sqlite3
+** CONSTRUCTOR: sqlite3_blob
**
-** This interfaces opens a [BLOB handle | handle] to the BLOB located
+** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located
** in row iRow, column zColumn, table zTable in database zDb;
** in other words, the same BLOB that would be selected by:
**
** <pre>
-** SELECT zColumn FROM zDb.zTable WHERE rowid = iRow;
-** </pre> {END}
-**
-** If the flags parameter is non-zero, the the BLOB is opened for read
-** and write access. If it is zero, the BLOB is opened for read access.
+** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
+** </pre>)^
+**
+** ^(Parameter zDb is not the filename that contains the database, but
+** rather the symbolic name of the database. For attached databases, this is
+** the name that appears after the AS keyword in the [ATTACH] statement.
+** For the main database file, the database name is "main". For TEMP
+** tables, the database name is "temp".)^
+**
+** ^If the flags parameter is non-zero, then the BLOB is opened for read
+** and write access. ^If the flags parameter is zero, the BLOB is opened for
+** read-only access.
+**
+** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is stored
+** in *ppBlob. Otherwise an [error code] is returned and, unless the error
+** code is SQLITE_MISUSE, *ppBlob is set to NULL.)^ ^This means that, provided
+** the API is not misused, it is always safe to call [sqlite3_blob_close()]
+** on *ppBlob after this function it returns.
+**
+** This function fails with SQLITE_ERROR if any of the following are true:
+** <ul>
+** <li> ^(Database zDb does not exist)^,
+** <li> ^(Table zTable does not exist within database zDb)^,
+** <li> ^(Table zTable is a WITHOUT ROWID table)^,
+** <li> ^(Column zColumn does not exist)^,
+** <li> ^(Row iRow is not present in the table)^,
+** <li> ^(The specified column of row iRow contains a value that is not
+** a TEXT or BLOB value)^,
+** <li> ^(Column zColumn is part of an index, PRIMARY KEY or UNIQUE
+** constraint and the blob is being opened for read/write access)^,
+** <li> ^([foreign key constraints | Foreign key constraints] are enabled,
+** column zColumn is part of a [child key] definition and the blob is
+** being opened for read/write access)^.
+** </ul>
**
-** Note that the database name is not the filename that contains
-** the database but rather the symbolic name of the database that
-** is assigned when the database is connected using [ATTACH].
-** For the main database file, the database name is "main".
-** For TEMP tables, the database name is "temp".
+** ^Unless it returns SQLITE_MISUSE, this function sets the
+** [database connection] error code and message accessible via
+** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
**
-** On success, [SQLITE_OK] is returned and the new [BLOB handle] is written
-** to *ppBlob. Otherwise an [error code] is returned and any value written
-** to *ppBlob should not be used by the caller.
-** This function sets the [database connection] error code and message
-** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()].
+** A BLOB referenced by sqlite3_blob_open() may be read using the
+** [sqlite3_blob_read()] interface and modified by using
+** [sqlite3_blob_write()]. The [BLOB handle] can be moved to a
+** different row of the same table using the [sqlite3_blob_reopen()]
+** interface. However, the column, table, or database of a [BLOB handle]
+** cannot be changed after the [BLOB handle] is opened.
**
-** If the row that a BLOB handle points to is modified by an
+** ^(If the row that a BLOB handle points to is modified by an
** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
** then the BLOB handle is marked as "expired".
** This is true if any column of the row is changed, even a column
-** other than the one the BLOB handle is open on.
-** Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
-** a expired BLOB handle fail with an return code of [SQLITE_ABORT].
-** Changes written into a BLOB prior to the BLOB expiring are not
-** rollback by the expiration of the BLOB. Such changes will eventually
-** commit if the transaction continues to completion.
-**
-** INVARIANTS:
-**
-** {H17813} A successful invocation of the [sqlite3_blob_open(D,B,T,C,R,F,P)]
-** interface shall open an [sqlite3_blob] object P on the BLOB
-** in column C of the table T in the database B on
-** the [database connection] D.
-**
-** {H17814} A successful invocation of [sqlite3_blob_open(D,...)] shall start
-** a new transaction on the [database connection] D if that
-** connection is not already in a transaction.
-**
-** {H17816} The [sqlite3_blob_open(D,B,T,C,R,F,P)] interface shall open
-** the BLOB for read and write access if and only if the F
-** parameter is non-zero.
-**
-** {H17819} The [sqlite3_blob_open()] interface shall return [SQLITE_OK] on
-** success and an appropriate [error code] on failure.
-**
-** {H17821} If an error occurs during evaluation of [sqlite3_blob_open(D,...)]
-** then subsequent calls to [sqlite3_errcode(D)],
-** [sqlite3_errmsg(D)], and [sqlite3_errmsg16(D)] shall return
-** information appropriate for that error.
-**
-** {H17824} If any column in the row that a [sqlite3_blob] has open is
-** changed by a separate [UPDATE] or [DELETE] statement or by
-** an [ON CONFLICT] side effect, then the [sqlite3_blob] shall
-** be marked as invalid.
-*/
-int sqlite3_blob_open(
+** other than the one the BLOB handle is open on.)^
+** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
+** an expired BLOB handle fail with a return code of [SQLITE_ABORT].
+** ^(Changes written into a BLOB prior to the BLOB expiring are not
+** rolled back by the expiration of the BLOB. Such changes will eventually
+** commit if the transaction continues to completion.)^
+**
+** ^Use the [sqlite3_blob_bytes()] interface to determine the size of
+** the opened blob. ^The size of a blob may not be changed by this
+** interface. Use the [UPDATE] SQL command to change the size of a
+** blob.
+**
+** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
+** and the built-in [zeroblob] SQL function may be used to create a
+** zero-filled blob to read or write using the incremental-blob interface.
+**
+** To avoid a resource leak, every open [BLOB handle] should eventually
+** be released by a call to [sqlite3_blob_close()].
+**
+** See also: [sqlite3_blob_close()],
+** [sqlite3_blob_reopen()], [sqlite3_blob_read()],
+** [sqlite3_blob_bytes()], [sqlite3_blob_write()].
+*/
+SQLITE_API int sqlite3_blob_open(
sqlite3*,
const char *zDb,
const char *zTable,
);
/*
-** CAPI3REF: Close A BLOB Handle {H17830} <S30230>
-**
-** Closes an open [BLOB handle].
+** CAPI3REF: Move a BLOB Handle to a New Row
+** METHOD: sqlite3_blob
**
-** Closing a BLOB shall cause the current transaction to commit
-** if there are no other BLOBs, no pending prepared statements, and the
-** database connection is in [autocommit mode].
-** If any writes were made to the BLOB, they might be held in cache
-** until the close operation if they will fit. {END}
+** ^This function is used to move an existing [BLOB handle] so that it points
+** to a different row of the same database table. ^The new row is identified
+** by the rowid value passed as the second argument. Only the row can be
+** changed. ^The database, table and column on which the blob handle is open
+** remain the same. Moving an existing [BLOB handle] to a new row is
+** faster than closing the existing handle and opening a new one.
**
-** Closing the BLOB often forces the changes
-** out to disk and so if any I/O errors occur, they will likely occur
-** at the time when the BLOB is closed. {H17833} Any errors that occur during
-** closing are reported as a non-zero return value.
+** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] -
+** it must exist and there must be either a blob or text value stored in
+** the nominated column.)^ ^If the new row is not present in the table, or if
+** it does not contain a blob or text value, or if another error occurs, an
+** SQLite error code is returned and the blob handle is considered aborted.
+** ^All subsequent calls to [sqlite3_blob_read()], [sqlite3_blob_write()] or
+** [sqlite3_blob_reopen()] on an aborted blob handle immediately return
+** SQLITE_ABORT. ^Calling [sqlite3_blob_bytes()] on an aborted blob handle
+** always returns zero.
**
-** The BLOB is closed unconditionally. Even if this routine returns
-** an error code, the BLOB is still closed.
-**
-** INVARIANTS:
+** ^This function sets the database handle error code and message.
+*/
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
+
+/*
+** CAPI3REF: Close A BLOB Handle
+** DESTRUCTOR: sqlite3_blob
**
-** {H17833} The [sqlite3_blob_close(P)] interface closes an [sqlite3_blob]
-** object P previously opened using [sqlite3_blob_open()].
+** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed
+** unconditionally. Even if this routine returns an error code, the
+** handle is still closed.)^
**
-** {H17836} Closing an [sqlite3_blob] object using
-** [sqlite3_blob_close()] shall cause the current transaction to
-** commit if there are no other open [sqlite3_blob] objects
-** or [prepared statements] on the same [database connection] and
-** the database connection is in [autocommit mode].
+** ^If the blob handle being closed was opened for read-write access, and if
+** the database is in auto-commit mode and there are no other open read-write
+** blob handles or active write statements, the current transaction is
+** committed. ^If an error occurs while committing the transaction, an error
+** code is returned and the transaction rolled back.
**
-** {H17839} The [sqlite3_blob_close(P)] interfaces shall close the
-** [sqlite3_blob] object P unconditionally, even if
-** [sqlite3_blob_close(P)] returns something other than [SQLITE_OK].
+** Calling this function with an argument that is not a NULL pointer or an
+** open blob handle results in undefined behaviour. ^Calling this routine
+** with a null pointer (such as would be returned by a failed call to
+** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function
+** is passed a valid open blob handle, the values returned by the
+** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
*/
-int sqlite3_blob_close(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
/*
-** CAPI3REF: Return The Size Of An Open BLOB {H17840} <S30230>
+** CAPI3REF: Return The Size Of An Open BLOB
+** METHOD: sqlite3_blob
**
-** Returns the size in bytes of the BLOB accessible via the open
-** []BLOB handle] in its only argument.
+** ^Returns the size in bytes of the BLOB accessible via the
+** successfully opened [BLOB handle] in its only argument. ^The
+** incremental blob I/O routines can only read or overwriting existing
+** blob content; they cannot change the size of a blob.
**
-** INVARIANTS:
-**
-** {H17843} The [sqlite3_blob_bytes(P)] interface returns the size
-** in bytes of the BLOB that the [sqlite3_blob] object P
-** refers to.
+** This routine only works on a [BLOB handle] which has been created
+** by a prior successful call to [sqlite3_blob_open()] and which has not
+** been closed by [sqlite3_blob_close()]. Passing any other pointer in
+** to this routine results in undefined and probably undesirable behavior.
*/
-int sqlite3_blob_bytes(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
/*
-** CAPI3REF: Read Data From A BLOB Incrementally {H17850} <S30230>
+** CAPI3REF: Read Data From A BLOB Incrementally
+** METHOD: sqlite3_blob
**
-** This function is used to read data from an open [BLOB handle] into a
+** ^(This function is used to read data from an open [BLOB handle] into a
** caller-supplied buffer. N bytes of data are copied into buffer Z
-** from the open BLOB, starting at offset iOffset.
+** from the open BLOB, starting at offset iOffset.)^
**
-** If offset iOffset is less than N bytes from the end of the BLOB,
-** [SQLITE_ERROR] is returned and no data is read. If N or iOffset is
+** ^If offset iOffset is less than N bytes from the end of the BLOB,
+** [SQLITE_ERROR] is returned and no data is read. ^If N or iOffset is
** less than zero, [SQLITE_ERROR] is returned and no data is read.
+** ^The size of the blob (and hence the maximum value of N+iOffset)
+** can be determined using the [sqlite3_blob_bytes()] interface.
**
-** An attempt to read from an expired [BLOB handle] fails with an
+** ^An attempt to read from an expired [BLOB handle] fails with an
** error code of [SQLITE_ABORT].
**
-** On success, SQLITE_OK is returned.
-** Otherwise, an [error code] or an [extended error code] is returned.
-**
-** INVARIANTS:
-**
-** {H17853} A successful invocation of [sqlite3_blob_read(P,Z,N,X)]
-** shall reads N bytes of data out of the BLOB referenced by
-** [BLOB handle] P beginning at offset X and store those bytes
-** into buffer Z.
-**
-** {H17856} In [sqlite3_blob_read(P,Z,N,X)] if the size of the BLOB
-** is less than N+X bytes, then the function shall leave the
-** Z buffer unchanged and return [SQLITE_ERROR].
-**
-** {H17859} In [sqlite3_blob_read(P,Z,N,X)] if X or N is less than zero
-** then the function shall leave the Z buffer unchanged
-** and return [SQLITE_ERROR].
-**
-** {H17862} The [sqlite3_blob_read(P,Z,N,X)] interface shall return [SQLITE_OK]
-** if N bytes are successfully read into buffer Z.
+** ^(On success, sqlite3_blob_read() returns SQLITE_OK.
+** Otherwise, an [error code] or an [extended error code] is returned.)^
**
-** {H17863} If the [BLOB handle] P is expired and X and N are within bounds
-** then [sqlite3_blob_read(P,Z,N,X)] shall leave the Z buffer
-** unchanged and return [SQLITE_ABORT].
+** This routine only works on a [BLOB handle] which has been created
+** by a prior successful call to [sqlite3_blob_open()] and which has not
+** been closed by [sqlite3_blob_close()]. Passing any other pointer in
+** to this routine results in undefined and probably undesirable behavior.
**
-** {H17865} If the requested read could not be completed,
-** the [sqlite3_blob_read(P,Z,N,X)] interface shall return an
-** appropriate [error code] or [extended error code].
-**
-** {H17868} If an error occurs during evaluation of [sqlite3_blob_read(P,...)]
-** then subsequent calls to [sqlite3_errcode(D)],
-** [sqlite3_errmsg(D)], and [sqlite3_errmsg16(D)] shall return
-** information appropriate for that error, where D is the
-** [database connection] that was used to open the [BLOB handle] P.
+** See also: [sqlite3_blob_write()].
*/
-int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
/*
-** CAPI3REF: Write Data Into A BLOB Incrementally {H17870} <S30230>
+** CAPI3REF: Write Data Into A BLOB Incrementally
+** METHOD: sqlite3_blob
**
-** This function is used to write data into an open [BLOB handle] from a
+** ^(This function is used to write data into an open [BLOB handle] from a
** caller-supplied buffer. N bytes of data are copied from the buffer Z
-** into the open BLOB, starting at offset iOffset.
+** into the open BLOB, starting at offset iOffset.)^
+**
+** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
+** Otherwise, an [error code] or an [extended error code] is returned.)^
+** ^Unless SQLITE_MISUSE is returned, this function sets the
+** [database connection] error code and message accessible via
+** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
**
-** If the [BLOB handle] passed as the first argument was not opened for
+** ^If the [BLOB handle] passed as the first argument was not opened for
** writing (the flags parameter to [sqlite3_blob_open()] was zero),
** this function returns [SQLITE_READONLY].
**
** This function may only modify the contents of the BLOB; it is
** not possible to increase the size of a BLOB using this API.
-** If offset iOffset is less than N bytes from the end of the BLOB,
-** [SQLITE_ERROR] is returned and no data is written. If N is
-** less than zero [SQLITE_ERROR] is returned and no data is written.
-**
-** An attempt to write to an expired [BLOB handle] fails with an
-** error code of [SQLITE_ABORT]. Writes to the BLOB that occurred
+** ^If offset iOffset is less than N bytes from the end of the BLOB,
+** [SQLITE_ERROR] is returned and no data is written. The size of the
+** BLOB (and hence the maximum value of N+iOffset) can be determined
+** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less
+** than zero [SQLITE_ERROR] is returned and no data is written.
+**
+** ^An attempt to write to an expired [BLOB handle] fails with an
+** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred
** before the [BLOB handle] expired are not rolled back by the
** expiration of the handle, though of course those changes might
** have been overwritten by the statement that expired the BLOB handle
** or by other independent statements.
**
-** On success, SQLITE_OK is returned.
-** Otherwise, an [error code] or an [extended error code] is returned.
-**
-** INVARIANTS:
-**
-** {H17873} A successful invocation of [sqlite3_blob_write(P,Z,N,X)]
-** shall write N bytes of data from buffer Z into the BLOB
-** referenced by [BLOB handle] P beginning at offset X into
-** the BLOB.
-**
-** {H17874} In the absence of other overridding changes, the changes
-** written to a BLOB by [sqlite3_blob_write()] shall
-** remain in effect after the associated [BLOB handle] expires.
-**
-** {H17875} If the [BLOB handle] P was opened for reading only then
-** an invocation of [sqlite3_blob_write(P,Z,N,X)] shall leave
-** the referenced BLOB unchanged and return [SQLITE_READONLY].
-**
-** {H17876} If the size of the BLOB referenced by [BLOB handle] P is
-** less than N+X bytes then [sqlite3_blob_write(P,Z,N,X)] shall
-** leave the BLOB unchanged and return [SQLITE_ERROR].
+** This routine only works on a [BLOB handle] which has been created
+** by a prior successful call to [sqlite3_blob_open()] and which has not
+** been closed by [sqlite3_blob_close()]. Passing any other pointer in
+** to this routine results in undefined and probably undesirable behavior.
**
-** {H17877} If the [BLOB handle] P is expired and X and N are within bounds
-** then [sqlite3_blob_read(P,Z,N,X)] shall leave the BLOB
-** unchanged and return [SQLITE_ABORT].
-**
-** {H17879} If X or N are less than zero then [sqlite3_blob_write(P,Z,N,X)]
-** shall leave the BLOB referenced by [BLOB handle] P unchanged
-** and return [SQLITE_ERROR].
-**
-** {H17882} The [sqlite3_blob_write(P,Z,N,X)] interface shall return
-** [SQLITE_OK] if N bytes where successfully written into the BLOB.
-**
-** {H17885} If the requested write could not be completed,
-** the [sqlite3_blob_write(P,Z,N,X)] interface shall return an
-** appropriate [error code] or [extended error code].
-**
-** {H17888} If an error occurs during evaluation of [sqlite3_blob_write(D,...)]
-** then subsequent calls to [sqlite3_errcode(D)],
-** [sqlite3_errmsg(D)], and [sqlite3_errmsg16(D)] shall return
-** information appropriate for that error.
+** See also: [sqlite3_blob_read()].
*/
-int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
/*
-** CAPI3REF: Virtual File System Objects {H11200} <S20100>
+** CAPI3REF: Virtual File System Objects
**
** A virtual filesystem (VFS) is an [sqlite3_vfs] object
** that SQLite uses to interact
** New VFSes can be registered and existing VFSes can be unregistered.
** The following interfaces are provided.
**
-** The sqlite3_vfs_find() interface returns a pointer to a VFS given its name.
-** Names are case sensitive.
-** Names are zero-terminated UTF-8 strings.
-** If there is no match, a NULL pointer is returned.
-** If zVfsName is NULL then the default VFS is returned.
+** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name.
+** ^Names are case sensitive.
+** ^Names are zero-terminated UTF-8 strings.
+** ^If there is no match, a NULL pointer is returned.
+** ^If zVfsName is NULL then the default VFS is returned.
**
-** New VFSes are registered with sqlite3_vfs_register().
-** Each new VFS becomes the default VFS if the makeDflt flag is set.
-** The same VFS can be registered multiple times without injury.
-** To make an existing VFS into the default VFS, register it again
+** ^New VFSes are registered with sqlite3_vfs_register().
+** ^Each new VFS becomes the default VFS if the makeDflt flag is set.
+** ^The same VFS can be registered multiple times without injury.
+** ^To make an existing VFS into the default VFS, register it again
** with the makeDflt flag set. If two different VFSes with the
** same name are registered, the behavior is undefined. If a
** VFS is registered with a name that is NULL or an empty string,
** then the behavior is undefined.
**
-** Unregister a VFS with the sqlite3_vfs_unregister() interface.
-** If the default VFS is unregistered, another VFS is chosen as
-** the default. The choice for the new VFS is arbitrary.
-**
-** INVARIANTS:
-**
-** {H11203} The [sqlite3_vfs_find(N)] interface returns a pointer to the
-** registered [sqlite3_vfs] object whose name exactly matches
-** the zero-terminated UTF-8 string N, or it returns NULL if
-** there is no match.
-**
-** {H11206} If the N parameter to [sqlite3_vfs_find(N)] is NULL then
-** the function returns a pointer to the default [sqlite3_vfs]
-** object if there is one, or NULL if there is no default
-** [sqlite3_vfs] object.
-**
-** {H11209} The [sqlite3_vfs_register(P,F)] interface registers the
-** well-formed [sqlite3_vfs] object P using the name given
-** by the zName field of the object.
-**
-** {H11212} Using the [sqlite3_vfs_register(P,F)] interface to register
-** the same [sqlite3_vfs] object multiple times is a harmless no-op.
-**
-** {H11215} The [sqlite3_vfs_register(P,F)] interface makes the [sqlite3_vfs]
-** object P the default [sqlite3_vfs] object if F is non-zero.
-**
-** {H11218} The [sqlite3_vfs_unregister(P)] interface unregisters the
-** [sqlite3_vfs] object P so that it is no longer returned by
-** subsequent calls to [sqlite3_vfs_find()].
+** ^Unregister a VFS with the sqlite3_vfs_unregister() interface.
+** ^(If the default VFS is unregistered, another VFS is chosen as
+** the default. The choice for the new VFS is arbitrary.)^
*/
-sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
-int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-int sqlite3_vfs_unregister(sqlite3_vfs*);
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
/*
-** CAPI3REF: Mutexes {H17000} <S20000>
+** CAPI3REF: Mutexes
**
** The SQLite core uses these routines for thread
** synchronization. Though they are intended for internal
** implementations are available in the SQLite core:
**
** <ul>
-** <li> SQLITE_MUTEX_OS2
-** <li> SQLITE_MUTEX_PTHREAD
+** <li> SQLITE_MUTEX_PTHREADS
** <li> SQLITE_MUTEX_W32
** <li> SQLITE_MUTEX_NOOP
** </ul>
**
** The SQLITE_MUTEX_NOOP implementation is a set of routines
** that does no real locking and is appropriate for use in
-** a single-threaded application. The SQLITE_MUTEX_OS2,
-** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations
-** are appropriate for use on OS/2, Unix, and Windows.
+** a single-threaded application. The SQLITE_MUTEX_PTHREADS and
+** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix
+** and Windows.
**
** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
** before calling sqlite3_initialize() or any other public sqlite3_
** function that calls sqlite3_initialize().
**
-** {H17011} The sqlite3_mutex_alloc() routine allocates a new
-** mutex and returns a pointer to it. {H17012} If it returns NULL
-** that means that a mutex could not be allocated. {H17013} SQLite
-** will unwind its stack and return an error. {H17014} The argument
-** to sqlite3_mutex_alloc() is one of these integer constants:
+** ^The sqlite3_mutex_alloc() routine allocates a new
+** mutex and returns a pointer to it. ^The sqlite3_mutex_alloc()
+** routine returns NULL if it is unable to allocate the requested
+** mutex. The argument to sqlite3_mutex_alloc() must one of these
+** integer constants:
**
** <ul>
** <li> SQLITE_MUTEX_FAST
** <li> SQLITE_MUTEX_RECURSIVE
** <li> SQLITE_MUTEX_STATIC_MASTER
** <li> SQLITE_MUTEX_STATIC_MEM
-** <li> SQLITE_MUTEX_STATIC_MEM2
+** <li> SQLITE_MUTEX_STATIC_OPEN
** <li> SQLITE_MUTEX_STATIC_PRNG
** <li> SQLITE_MUTEX_STATIC_LRU
-** <li> SQLITE_MUTEX_STATIC_LRU2
+** <li> SQLITE_MUTEX_STATIC_PMEM
+** <li> SQLITE_MUTEX_STATIC_APP1
+** <li> SQLITE_MUTEX_STATIC_APP2
+** <li> SQLITE_MUTEX_STATIC_APP3
+** <li> SQLITE_MUTEX_STATIC_VFS1
+** <li> SQLITE_MUTEX_STATIC_VFS2
+** <li> SQLITE_MUTEX_STATIC_VFS3
** </ul>
**
-** {H17015} The first two constants cause sqlite3_mutex_alloc() to create
-** a new mutex. The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
-** is used but not necessarily so when SQLITE_MUTEX_FAST is used. {END}
+** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
+** cause sqlite3_mutex_alloc() to create
+** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
+** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
** The mutex implementation does not need to make a distinction
** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
-** not want to. {H17016} But SQLite will only request a recursive mutex in
-** cases where it really needs one. {END} If a faster non-recursive mutex
+** not want to. SQLite will only request a recursive mutex in
+** cases where it really needs one. If a faster non-recursive mutex
** implementation is available on the host platform, the mutex subsystem
** might return such a mutex in response to SQLITE_MUTEX_FAST.
**
-** {H17017} The other allowed parameters to sqlite3_mutex_alloc() each return
-** a pointer to a static preexisting mutex. {END} Four static mutexes are
+** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other
+** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return
+** a pointer to a static preexisting mutex. ^Nine static mutexes are
** used by the current version of SQLite. Future versions of SQLite
** may add additional static mutexes. Static mutexes are for internal
** use by SQLite only. Applications that use SQLite mutexes should
** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
** SQLITE_MUTEX_RECURSIVE.
**
-** {H17018} Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
+** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
-** returns a different mutex on every call. {H17034} But for the static
+** returns a different mutex on every call. ^For the static
** mutex types, the same mutex is returned on every call that has
** the same type number.
**
-** {H17019} The sqlite3_mutex_free() routine deallocates a previously
-** allocated dynamic mutex. {H17020} SQLite is careful to deallocate every
-** dynamic mutex that it allocates. {A17021} The dynamic mutexes must not be in
-** use when they are deallocated. {A17022} Attempting to deallocate a static
-** mutex results in undefined behavior. {H17023} SQLite never deallocates
-** a static mutex. {END}
+** ^The sqlite3_mutex_free() routine deallocates a previously
+** allocated dynamic mutex. Attempting to deallocate a static
+** mutex results in undefined behavior.
**
-** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
-** to enter a mutex. {H17024} If another thread is already within the mutex,
+** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
+** to enter a mutex. ^If another thread is already within the mutex,
** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
-** SQLITE_BUSY. {H17025} The sqlite3_mutex_try() interface returns [SQLITE_OK]
-** upon successful entry. {H17026} Mutexes created using
+** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK]
+** upon successful entry. ^(Mutexes created using
** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.
-** {H17027} In such cases the,
+** In such cases, the
** mutex must be exited an equal number of times before another thread
-** can enter. {A17028} If the same thread tries to enter any other
-** kind of mutex more than once, the behavior is undefined.
-** {H17029} SQLite will never exhibit
-** such behavior in its own use of mutexes.
+** can enter.)^ If the same thread tries to enter any mutex other
+** than an SQLITE_MUTEX_RECURSIVE more than once, the behavior is undefined.
**
-** Some systems (for example, Windows 95) do not support the operation
+** ^(Some systems (for example, Windows 95) do not support the operation
** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try()
-** will always return SQLITE_BUSY. {H17030} The SQLite core only ever uses
-** sqlite3_mutex_try() as an optimization so this is acceptable behavior.
+** will always return SQLITE_BUSY. The SQLite core only ever uses
+** sqlite3_mutex_try() as an optimization so this is acceptable
+** behavior.)^
**
-** {H17031} The sqlite3_mutex_leave() routine exits a mutex that was
-** previously entered by the same thread. {A17032} The behavior
+** ^The sqlite3_mutex_leave() routine exits a mutex that was
+** previously entered by the same thread. The behavior
** is undefined if the mutex is not currently entered by the
-** calling thread or is not currently allocated. {H17033} SQLite will
-** never do either. {END}
+** calling thread or is not currently allocated.
**
-** If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
+** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
** sqlite3_mutex_leave() is a NULL pointer, then all three routines
** behave as no-ops.
**
** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
*/
-sqlite3_mutex *sqlite3_mutex_alloc(int);
-void sqlite3_mutex_free(sqlite3_mutex*);
-void sqlite3_mutex_enter(sqlite3_mutex*);
-int sqlite3_mutex_try(sqlite3_mutex*);
-void sqlite3_mutex_leave(sqlite3_mutex*);
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int);
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
/*
-** CAPI3REF: Mutex Methods Object {H17120} <S20130>
-** EXPERIMENTAL
+** CAPI3REF: Mutex Methods Object
**
** An instance of this structure defines the low-level routines
** used to allocate and use mutexes.
**
** Usually, the default mutex implementations provided by SQLite are
-** sufficient, however the user has the option of substituting a custom
+** sufficient, however the application has the option of substituting a custom
** implementation for specialized deployments or systems for which SQLite
-** does not provide a suitable implementation. In this case, the user
+** does not provide a suitable implementation. In this case, the application
** creates and populates an instance of this structure to pass
** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option.
** Additionally, an instance of this structure can be used as an
** output variable when querying the system for the current mutex
** implementation, using the [SQLITE_CONFIG_GETMUTEX] option.
**
-** The xMutexInit method defined by this structure is invoked as
+** ^The xMutexInit method defined by this structure is invoked as
** part of system initialization by the sqlite3_initialize() function.
-** {H17001} The xMutexInit routine shall be called by SQLite once for each
+** ^The xMutexInit routine is called by SQLite exactly once for each
** effective call to [sqlite3_initialize()].
**
-** The xMutexEnd method defined by this structure is invoked as
+** ^The xMutexEnd method defined by this structure is invoked as
** part of system shutdown by the sqlite3_shutdown() function. The
** implementation of this method is expected to release all outstanding
** resources obtained by the mutex methods implementation, especially
-** those obtained by the xMutexInit method. {H17003} The xMutexEnd()
-** interface shall be invoked once for each call to [sqlite3_shutdown()].
+** those obtained by the xMutexInit method. ^The xMutexEnd()
+** interface is invoked exactly once for each call to [sqlite3_shutdown()].
**
-** The remaining seven methods defined by this structure (xMutexAlloc,
+** ^(The remaining seven methods defined by this structure (xMutexAlloc,
** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and
** xMutexNotheld) implement the following interfaces (respectively):
**
** <li> [sqlite3_mutex_leave()] </li>
** <li> [sqlite3_mutex_held()] </li>
** <li> [sqlite3_mutex_notheld()] </li>
-** </ul>
+** </ul>)^
**
** The only difference is that the public sqlite3_XXX functions enumerated
** above silently ignore any invocations that pass a NULL pointer instead
** of passing a NULL pointer instead of a valid mutex handle are undefined
** (i.e. it is acceptable to provide an implementation that segfaults if
** it is passed a NULL pointer).
+**
+** The xMutexInit() method must be threadsafe. It must be harmless to
+** invoke xMutexInit() multiple times within the same process and without
+** intervening calls to xMutexEnd(). Second and subsequent calls to
+** xMutexInit() must be no-ops.
+**
+** xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()]
+** and its associates). Similarly, xMutexAlloc() must not use SQLite memory
+** allocation for a static mutex. ^However xMutexAlloc() may use SQLite
+** memory allocation for a fast or recursive mutex.
+**
+** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is
+** called, but only if the prior call to xMutexInit returned SQLITE_OK.
+** If xMutexInit fails in any way, it is expected to clean up after itself
+** prior to returning.
*/
typedef struct sqlite3_mutex_methods sqlite3_mutex_methods;
struct sqlite3_mutex_methods {
};
/*
-** CAPI3REF: Mutex Verification Routines {H17080} <S20130> <S30800>
+** CAPI3REF: Mutex Verification Routines
**
** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines
-** are intended for use inside assert() statements. {H17081} The SQLite core
+** are intended for use inside assert() statements. The SQLite core
** never uses these routines except inside an assert() and applications
-** are advised to follow the lead of the core. {H17082} The core only
+** are advised to follow the lead of the core. The SQLite core only
** provides implementations for these routines when it is compiled
-** with the SQLITE_DEBUG flag. {A17087} External mutex implementations
+** with the SQLITE_DEBUG flag. External mutex implementations
** are only required to provide these routines if SQLITE_DEBUG is
** defined and if NDEBUG is not defined.
**
-** {H17083} These routines should return true if the mutex in their argument
+** These routines should return true if the mutex in their argument
** is held or not held, respectively, by the calling thread.
**
-** {X17084} The implementation is not required to provided versions of these
+** The implementation is not required to provide versions of these
** routines that actually work. If the implementation does not provide working
** versions of these routines, it should at least provide stubs that always
** return true so that one does not get spurious assertion failures.
**
-** {H17085} If the argument to sqlite3_mutex_held() is a NULL pointer then
-** the routine should return 1. {END} This seems counter-intuitive since
-** clearly the mutex cannot be held if it does not exist. But the
+** If the argument to sqlite3_mutex_held() is a NULL pointer then
+** the routine should return 1. This seems counter-intuitive since
+** clearly the mutex cannot be held if it does not exist. But
** the reason the mutex does not exist is because the build is not
** using mutexes. And we do not want the assert() containing the
** call to sqlite3_mutex_held() to fail, so a non-zero return is
-** the appropriate thing to do. {H17086} The sqlite3_mutex_notheld()
+** the appropriate thing to do. The sqlite3_mutex_notheld()
** interface should also return 1 when given a NULL pointer.
*/
-int sqlite3_mutex_held(sqlite3_mutex*);
-int sqlite3_mutex_notheld(sqlite3_mutex*);
+#ifndef NDEBUG
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
+#endif
/*
-** CAPI3REF: Mutex Types {H17001} <H17000>
+** CAPI3REF: Mutex Types
**
** The [sqlite3_mutex_alloc()] interface takes a single argument
** which is one of these integer constants.
#define SQLITE_MUTEX_RECURSIVE 1
#define SQLITE_MUTEX_STATIC_MASTER 2
#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */
-#define SQLITE_MUTEX_STATIC_MEM2 4 /* sqlite3_release_memory() */
-#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */
+#define SQLITE_MUTEX_STATIC_MEM2 4 /* NOT USED */
+#define SQLITE_MUTEX_STATIC_OPEN 4 /* sqlite3BtreeOpen() */
+#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_randomness() */
#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */
-#define SQLITE_MUTEX_STATIC_LRU2 7 /* lru page list */
+#define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */
+#define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */
+#define SQLITE_MUTEX_STATIC_APP1 8 /* For use by application */
+#define SQLITE_MUTEX_STATIC_APP2 9 /* For use by application */
+#define SQLITE_MUTEX_STATIC_APP3 10 /* For use by application */
+#define SQLITE_MUTEX_STATIC_VFS1 11 /* For use by built-in VFS */
+#define SQLITE_MUTEX_STATIC_VFS2 12 /* For use by extension VFS */
+#define SQLITE_MUTEX_STATIC_VFS3 13 /* For use by application VFS */
+
+/*
+** CAPI3REF: Retrieve the mutex for a database connection
+** METHOD: sqlite3
+**
+** ^This interface returns a pointer the [sqlite3_mutex] object that
+** serializes access to the [database connection] given in the argument
+** when the [threading mode] is Serialized.
+** ^If the [threading mode] is Single-thread or Multi-thread then this
+** routine returns a NULL pointer.
+*/
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
/*
-** CAPI3REF: Low-Level Control Of Database Files {H11300} <S30800>
+** CAPI3REF: Low-Level Control Of Database Files
+** METHOD: sqlite3
**
-** {H11301} The [sqlite3_file_control()] interface makes a direct call to the
+** ^The [sqlite3_file_control()] interface makes a direct call to the
** xFileControl method for the [sqlite3_io_methods] object associated
-** with a particular database identified by the second argument. {H11302} The
-** name of the database is the name assigned to the database by the
-** <a href="lang_attach.html">ATTACH</a> SQL command that opened the
-** database. {H11303} To control the main database file, use the name "main"
-** or a NULL pointer. {H11304} The third and fourth parameters to this routine
+** with a particular database identified by the second argument. ^The
+** name of the database is "main" for the main database or "temp" for the
+** TEMP database, or the name that appears after the AS keyword for
+** databases that are added using the [ATTACH] SQL command.
+** ^A NULL pointer can be used in place of "main" to refer to the
+** main database file.
+** ^The third and fourth parameters to this routine
** are passed directly through to the second and third parameters of
-** the xFileControl method. {H11305} The return value of the xFileControl
+** the xFileControl method. ^The return value of the xFileControl
** method becomes the return value of this routine.
**
-** {H11306} If the second parameter (zDbName) does not match the name of any
-** open database file, then SQLITE_ERROR is returned. {H11307} This error
+** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes
+** a pointer to the underlying [sqlite3_file] object to be written into
+** the space pointed to by the 4th parameter. ^The SQLITE_FCNTL_FILE_POINTER
+** case is a short-circuit path which does not actually invoke the
+** underlying sqlite3_io_methods.xFileControl method.
+**
+** ^If the second parameter (zDbName) does not match the name of any
+** open database file, then SQLITE_ERROR is returned. ^This error
** code is not remembered and will not be recalled by [sqlite3_errcode()]
-** or [sqlite3_errmsg()]. {A11308} The underlying xFileControl method might
-** also return SQLITE_ERROR. {A11309} There is no way to distinguish between
+** or [sqlite3_errmsg()]. The underlying xFileControl method might
+** also return SQLITE_ERROR. There is no way to distinguish between
** an incorrect zDbName and an SQLITE_ERROR return from the underlying
-** xFileControl method. {END}
+** xFileControl method.
**
** See also: [SQLITE_FCNTL_LOCKSTATE]
*/
-int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
+SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
/*
-** CAPI3REF: Testing Interface {H11400} <S30800>
+** CAPI3REF: Testing Interface
**
-** The sqlite3_test_control() interface is used to read out internal
+** ^The sqlite3_test_control() interface is used to read out internal
** state of SQLite and to inject faults into SQLite for testing
-** purposes. The first parameter is an operation code that determines
+** purposes. ^The first parameter is an operation code that determines
** the number, meaning, and operation of all subsequent parameters.
**
** This interface is not for use by applications. It exists solely
** Unlike most of the SQLite API, this function is not guaranteed to
** operate consistently from one release to the next.
*/
-int sqlite3_test_control(int op, ...);
+SQLITE_API int sqlite3_test_control(int op, ...);
/*
-** CAPI3REF: Testing Interface Operation Codes {H11410} <H11400>
+** CAPI3REF: Testing Interface Operation Codes
**
** These constants are the valid operation code parameters used
** as the first argument to [sqlite3_test_control()].
** Applications should not use any of these parameters or the
** [sqlite3_test_control()] interface.
*/
+#define SQLITE_TESTCTRL_FIRST 5
#define SQLITE_TESTCTRL_PRNG_SAVE 5
#define SQLITE_TESTCTRL_PRNG_RESTORE 6
#define SQLITE_TESTCTRL_PRNG_RESET 7
#define SQLITE_TESTCTRL_BITVEC_TEST 8
#define SQLITE_TESTCTRL_FAULT_INSTALL 9
#define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS 10
-
-/*
-** CAPI3REF: SQLite Runtime Status {H17200} <S60200>
-** EXPERIMENTAL
-**
-** This interface is used to retrieve runtime status information
-** about the preformance of SQLite, and optionally to reset various
-** highwater marks. The first argument is an integer code for
-** the specific parameter to measure. Recognized integer codes
-** are of the form [SQLITE_STATUS_MEMORY_USED | SQLITE_STATUS_...].
-** The current value of the parameter is returned into *pCurrent.
-** The highest recorded value is returned in *pHighwater. If the
+#define SQLITE_TESTCTRL_PENDING_BYTE 11
+#define SQLITE_TESTCTRL_ASSERT 12
+#define SQLITE_TESTCTRL_ALWAYS 13
+#define SQLITE_TESTCTRL_RESERVE 14
+#define SQLITE_TESTCTRL_OPTIMIZATIONS 15
+#define SQLITE_TESTCTRL_ISKEYWORD 16
+#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 /* NOT USED */
+#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18
+#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */
+#define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD 19
+#define SQLITE_TESTCTRL_NEVER_CORRUPT 20
+#define SQLITE_TESTCTRL_VDBE_COVERAGE 21
+#define SQLITE_TESTCTRL_BYTEORDER 22
+#define SQLITE_TESTCTRL_ISINIT 23
+#define SQLITE_TESTCTRL_SORTER_MMAP 24
+#define SQLITE_TESTCTRL_IMPOSTER 25
+#define SQLITE_TESTCTRL_LAST 25
+
+/*
+** CAPI3REF: SQLite Runtime Status
+**
+** ^These interfaces are used to retrieve runtime status information
+** about the performance of SQLite, and optionally to reset various
+** highwater marks. ^The first argument is an integer code for
+** the specific parameter to measure. ^(Recognized integer codes
+** are of the form [status parameters | SQLITE_STATUS_...].)^
+** ^The current value of the parameter is returned into *pCurrent.
+** ^The highest recorded value is returned in *pHighwater. ^If the
** resetFlag is true, then the highest record value is reset after
-** *pHighwater is written. Some parameters do not record the highest
+** *pHighwater is written. ^(Some parameters do not record the highest
** value. For those parameters
-** nothing is written into *pHighwater and the resetFlag is ignored.
-** Other parameters record only the highwater mark and not the current
-** value. For these latter parameters nothing is written into *pCurrent.
+** nothing is written into *pHighwater and the resetFlag is ignored.)^
+** ^(Other parameters record only the highwater mark and not the current
+** value. For these latter parameters nothing is written into *pCurrent.)^
**
-** This routine returns SQLITE_OK on success and a non-zero
-** [error code] on failure.
+** ^The sqlite3_status() and sqlite3_status64() routines return
+** SQLITE_OK on success and a non-zero [error code] on failure.
**
-** This routine is threadsafe but is not atomic. This routine can
-** called while other threads are running the same or different SQLite
-** interfaces. However the values returned in *pCurrent and
-** *pHighwater reflect the status of SQLite at different points in time
-** and it is possible that another thread might change the parameter
-** in between the times when *pCurrent and *pHighwater are written.
+** If either the current value or the highwater mark is too large to
+** be represented by a 32-bit integer, then the values returned by
+** sqlite3_status() are undefined.
**
** See also: [sqlite3_db_status()]
*/
-SQLITE_EXPERIMENTAL int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+SQLITE_API int sqlite3_status64(
+ int op,
+ sqlite3_int64 *pCurrent,
+ sqlite3_int64 *pHighwater,
+ int resetFlag
+);
-/*
-** CAPI3REF: Database Connection Status {H17201} <S60200>
-** EXPERIMENTAL
-**
-** This interface is used to retrieve runtime status information
-** about a single [database connection]. The first argument is the
-** database connection object to be interrogated. The second argument
-** is the parameter to interrogate. Currently, the only allowed value
-** for the second parameter is [SQLITE_DBSTATUS_LOOKASIDE_USED].
-** Additional options will likely appear in future releases of SQLite.
-**
-** The current value of the request parameter is written into *pCur
-** and the highest instantaneous value is written into *pHiwtr. If
-** the resetFlg is true, then the highest instantaneous value is
-** reset back down to the current value.
-**
-** See also: [sqlite3_status()].
-*/
-SQLITE_EXPERIMENTAL int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
/*
-** CAPI3REF: Status Parameters {H17250} <H17200>
-** EXPERIMENTAL
+** CAPI3REF: Status Parameters
+** KEYWORDS: {status parameters}
**
** These integer constants designate various run-time status parameters
** that can be returned by [sqlite3_status()].
**
** <dl>
-** <dt>SQLITE_STATUS_MEMORY_USED</dt>
+** [[SQLITE_STATUS_MEMORY_USED]] ^(<dt>SQLITE_STATUS_MEMORY_USED</dt>
** <dd>This parameter is the current amount of memory checked out
** using [sqlite3_malloc()], either directly or indirectly. The
** figure includes calls made to [sqlite3_malloc()] by the application
-** and internal memory usage by the SQLite library. Scratch memory
-** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
+** and internal memory usage by the SQLite library. Auxiliary page-cache
** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
** this parameter. The amount returned is the sum of the allocation
-** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>
+** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^
**
-** <dt>SQLITE_STATUS_MALLOC_SIZE</dt>
+** [[SQLITE_STATUS_MALLOC_SIZE]] ^(<dt>SQLITE_STATUS_MALLOC_SIZE</dt>
** <dd>This parameter records the largest memory allocation request
** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their
** internal equivalents). Only the value returned in the
** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.</dd>
+** The value written into the *pCurrent parameter is undefined.</dd>)^
**
-** <dt>SQLITE_STATUS_PAGECACHE_USED</dt>
+** [[SQLITE_STATUS_MALLOC_COUNT]] ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt>
+** <dd>This parameter records the number of separate memory allocations
+** currently checked out.</dd>)^
+**
+** [[SQLITE_STATUS_PAGECACHE_USED]] ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt>
** <dd>This parameter returns the number of pages used out of the
** [pagecache memory allocator] that was configured using
** [SQLITE_CONFIG_PAGECACHE]. The
-** value returned is in pages, not in bytes.</dd>
+** value returned is in pages, not in bytes.</dd>)^
**
-** <dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
+** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]]
+** ^(<dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
** <dd>This parameter returns the number of bytes of page cache
-** allocation which could not be statisfied by the [SQLITE_CONFIG_PAGECACHE]
+** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE]
** buffer and where forced to overflow to [sqlite3_malloc()]. The
** returned value includes allocations that overflowed because they
** where too large (they were larger than the "sz" parameter to
** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because
-** no space was left in the page cache.</dd>
+** no space was left in the page cache.</dd>)^
**
-** <dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
+** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
** <dd>This parameter records the largest memory allocation request
** handed to [pagecache memory allocator]. Only the value returned in the
** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.</dd>
-**
-** <dt>SQLITE_STATUS_SCRATCH_USED</dt>
-** <dd>This parameter returns the number of allocations used out of the
-** [scratch memory allocator] configured using
-** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not
-** in bytes. Since a single thread may only have one scratch allocation
-** outstanding at time, this parameter also reports the number of threads
-** using scratch memory at the same time.</dd>
-**
-** <dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
-** <dd>This parameter returns the number of bytes of scratch memory
-** allocation which could not be statisfied by the [SQLITE_CONFIG_SCRATCH]
-** buffer and where forced to overflow to [sqlite3_malloc()]. The values
-** returned include overflows because the requested allocation was too
-** larger (that is, because the requested allocation was larger than the
-** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
-** slots were available.
-** </dd>
+** The value written into the *pCurrent parameter is undefined.</dd>)^
**
-** <dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
-** <dd>This parameter records the largest memory allocation request
-** handed to [scratch memory allocator]. Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.</dd>
+** [[SQLITE_STATUS_SCRATCH_USED]] <dt>SQLITE_STATUS_SCRATCH_USED</dt>
+** <dd>No longer used.</dd>
**
-** <dt>SQLITE_STATUS_PARSER_STACK</dt>
-** <dd>This parameter records the deepest parser stack. It is only
-** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>
+** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
+** <dd>No longer used.</dd>
+**
+** [[SQLITE_STATUS_SCRATCH_SIZE]] <dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
+** <dd>No longer used.</dd>
+**
+** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
+** <dd>The *pHighwater parameter records the deepest parser stack.
+** The *pCurrent value is undefined. The *pHighwater value is only
+** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
** </dl>
**
** New status parameters may be added from time to time.
#define SQLITE_STATUS_MEMORY_USED 0
#define SQLITE_STATUS_PAGECACHE_USED 1
#define SQLITE_STATUS_PAGECACHE_OVERFLOW 2
-#define SQLITE_STATUS_SCRATCH_USED 3
-#define SQLITE_STATUS_SCRATCH_OVERFLOW 4
+#define SQLITE_STATUS_SCRATCH_USED 3 /* NOT USED */
+#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 /* NOT USED */
#define SQLITE_STATUS_MALLOC_SIZE 5
#define SQLITE_STATUS_PARSER_STACK 6
#define SQLITE_STATUS_PAGECACHE_SIZE 7
-#define SQLITE_STATUS_SCRATCH_SIZE 8
+#define SQLITE_STATUS_SCRATCH_SIZE 8 /* NOT USED */
+#define SQLITE_STATUS_MALLOC_COUNT 9
/*
-** CAPI3REF: Status Parameters for database connections {H17275} <H17200>
-** EXPERIMENTAL
+** CAPI3REF: Database Connection Status
+** METHOD: sqlite3
+**
+** ^This interface is used to retrieve runtime status information
+** about a single [database connection]. ^The first argument is the
+** database connection object to be interrogated. ^The second argument
+** is an integer constant, taken from the set of
+** [SQLITE_DBSTATUS options], that
+** determines the parameter to interrogate. The set of
+** [SQLITE_DBSTATUS options] is likely
+** to grow in future releases of SQLite.
+**
+** ^The current value of the requested parameter is written into *pCur
+** and the highest instantaneous value is written into *pHiwtr. ^If
+** the resetFlg is true, then the highest instantaneous value is
+** reset back down to the current value.
+**
+** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a
+** non-zero [error code] on failure.
**
-** Status verbs for [sqlite3_db_status()].
+** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
+*/
+SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
+
+/*
+** CAPI3REF: Status Parameters for database connections
+** KEYWORDS: {SQLITE_DBSTATUS options}
+**
+** These constants are the available integer "verbs" that can be passed as
+** the second argument to the [sqlite3_db_status()] interface.
+**
+** New verbs may be added in future releases of SQLite. Existing verbs
+** might be discontinued. Applications should check the return code from
+** [sqlite3_db_status()] to make sure that the call worked.
+** The [sqlite3_db_status()] interface will return a non-zero error code
+** if a discontinued or unsupported verb is invoked.
**
** <dl>
-** <dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
+** [[SQLITE_DBSTATUS_LOOKASIDE_USED]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
** <dd>This parameter returns the number of lookaside memory slots currently
-** checked out.</dd>
+** checked out.</dd>)^
+**
+** [[SQLITE_DBSTATUS_LOOKASIDE_HIT]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_HIT</dt>
+** <dd>This parameter returns the number malloc attempts that were
+** satisfied using lookaside memory. Only the high-water value is meaningful;
+** the current value is always zero.)^
+**
+** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE]]
+** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE</dt>
+** <dd>This parameter returns the number malloc attempts that might have
+** been satisfied using lookaside memory but failed due to the amount of
+** memory requested being larger than the lookaside slot size.
+** Only the high-water value is meaningful;
+** the current value is always zero.)^
+**
+** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL]]
+** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL</dt>
+** <dd>This parameter returns the number malloc attempts that might have
+** been satisfied using lookaside memory but failed due to all lookaside
+** memory already being in use.
+** Only the high-water value is meaningful;
+** the current value is always zero.)^
+**
+** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>
+** <dd>This parameter returns the approximate number of bytes of heap
+** memory used by all pager caches associated with the database connection.)^
+** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
+**
+** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]]
+** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt>
+** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a
+** pager cache is shared between two or more connections the bytes of heap
+** memory used by that pager cache is divided evenly between the attached
+** connections.)^ In other words, if none of the pager caches associated
+** with the database connection are shared, this request returns the same
+** value as DBSTATUS_CACHE_USED. Or, if one or more or the pager caches are
+** shared, the value returned by this call will be smaller than that returned
+** by DBSTATUS_CACHE_USED. ^The highwater mark associated with
+** SQLITE_DBSTATUS_CACHE_USED_SHARED is always 0.
+**
+** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
+** <dd>This parameter returns the approximate number of bytes of heap
+** memory used to store the schema for all databases associated
+** with the connection - main, temp, and any [ATTACH]-ed databases.)^
+** ^The full amount of memory used by the schemas is reported, even if the
+** schema memory is shared with other database connections due to
+** [shared cache mode] being enabled.
+** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.
+**
+** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
+** <dd>This parameter returns the approximate number of bytes of heap
+** and lookaside memory used by all prepared statements associated with
+** the database connection.)^
+** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.
+** </dd>
+**
+** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(<dt>SQLITE_DBSTATUS_CACHE_HIT</dt>
+** <dd>This parameter returns the number of pager cache hits that have
+** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT
+** is always 0.
+** </dd>
+**
+** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(<dt>SQLITE_DBSTATUS_CACHE_MISS</dt>
+** <dd>This parameter returns the number of pager cache misses that have
+** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS
+** is always 0.
+** </dd>
+**
+** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(<dt>SQLITE_DBSTATUS_CACHE_WRITE</dt>
+** <dd>This parameter returns the number of dirty cache entries that have
+** been written to disk. Specifically, the number of pages written to the
+** wal file in wal mode databases, or the number of pages written to the
+** database file in rollback mode databases. Any pages written as part of
+** transaction rollback or database recovery operations are not included.
+** If an IO or other error occurs while writing a page to disk, the effect
+** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The
+** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
+** </dd>
+**
+** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt>
+** <dd>This parameter returns zero for the current value if and only if
+** all foreign key constraints (deferred or immediate) have been
+** resolved.)^ ^The highwater mark is always 0.
+** </dd>
** </dl>
*/
-#define SQLITE_DBSTATUS_LOOKASIDE_USED 0
+#define SQLITE_DBSTATUS_LOOKASIDE_USED 0
+#define SQLITE_DBSTATUS_CACHE_USED 1
+#define SQLITE_DBSTATUS_SCHEMA_USED 2
+#define SQLITE_DBSTATUS_STMT_USED 3
+#define SQLITE_DBSTATUS_LOOKASIDE_HIT 4
+#define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE 5
+#define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL 6
+#define SQLITE_DBSTATUS_CACHE_HIT 7
+#define SQLITE_DBSTATUS_CACHE_MISS 8
+#define SQLITE_DBSTATUS_CACHE_WRITE 9
+#define SQLITE_DBSTATUS_DEFERRED_FKS 10
+#define SQLITE_DBSTATUS_CACHE_USED_SHARED 11
+#define SQLITE_DBSTATUS_MAX 11 /* Largest defined DBSTATUS */
+
/*
-** Undo the hack that converts floating point types to integer for
-** builds on processors without floating point support.
+** CAPI3REF: Prepared Statement Status
+** METHOD: sqlite3_stmt
+**
+** ^(Each prepared statement maintains various
+** [SQLITE_STMTSTATUS counters] that measure the number
+** of times it has performed specific operations.)^ These counters can
+** be used to monitor the performance characteristics of the prepared
+** statements. For example, if the number of table steps greatly exceeds
+** the number of table searches or result rows, that would tend to indicate
+** that the prepared statement is using a full table scan rather than
+** an index.
+**
+** ^(This interface is used to retrieve and reset counter values from
+** a [prepared statement]. The first argument is the prepared statement
+** object to be interrogated. The second argument
+** is an integer code for a specific [SQLITE_STMTSTATUS counter]
+** to be interrogated.)^
+** ^The current value of the requested counter is returned.
+** ^If the resetFlg is true, then the counter is reset to zero after this
+** interface call returns.
+**
+** See also: [sqlite3_status()] and [sqlite3_db_status()].
*/
-#ifdef SQLITE_OMIT_FLOATING_POINT
-# undef double
-#endif
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
-#ifdef __cplusplus
-} /* End of the 'extern "C"' block */
-#endif
-#endif
+/*
+** CAPI3REF: Status Parameters for prepared statements
+** KEYWORDS: {SQLITE_STMTSTATUS counter} {SQLITE_STMTSTATUS counters}
+**
+** These preprocessor macros define integer codes that name counter
+** values associated with the [sqlite3_stmt_status()] interface.
+** The meanings of the various counters are as follows:
+**
+** <dl>
+** [[SQLITE_STMTSTATUS_FULLSCAN_STEP]] <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt>
+** <dd>^This is the number of times that SQLite has stepped forward in
+** a table as part of a full table scan. Large numbers for this counter
+** may indicate opportunities for performance improvement through
+** careful use of indices.</dd>
+**
+** [[SQLITE_STMTSTATUS_SORT]] <dt>SQLITE_STMTSTATUS_SORT</dt>
+** <dd>^This is the number of sort operations that have occurred.
+** A non-zero value in this counter may indicate an opportunity to
+** improvement performance through careful use of indices.</dd>
+**
+** [[SQLITE_STMTSTATUS_AUTOINDEX]] <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt>
+** <dd>^This is the number of rows inserted into transient indices that
+** were created automatically in order to help joins run faster.
+** A non-zero value in this counter may indicate an opportunity to
+** improvement performance by adding permanent indices that do not
+** need to be reinitialized each time the statement is run.</dd>
+**
+** [[SQLITE_STMTSTATUS_VM_STEP]] <dt>SQLITE_STMTSTATUS_VM_STEP</dt>
+** <dd>^This is the number of virtual machine operations executed
+** by the prepared statement if that number is less than or equal
+** to 2147483647. The number of virtual machine operations can be
+** used as a proxy for the total work done by the prepared statement.
+** If the number of virtual machine operations exceeds 2147483647
+** then the value returned by this statement status code is undefined.
+**
+** [[SQLITE_STMTSTATUS_REPREPARE]] <dt>SQLITE_STMTSTATUS_REPREPARE</dt>
+** <dd>^This is the number of times that the prepare statement has been
+** automatically regenerated due to schema changes or change to
+** [bound parameters] that might affect the query plan.
+**
+** [[SQLITE_STMTSTATUS_RUN]] <dt>SQLITE_STMTSTATUS_RUN</dt>
+** <dd>^This is the number of times that the prepared statement has
+** been run. A single "run" for the purposes of this counter is one
+** or more calls to [sqlite3_step()] followed by a call to [sqlite3_reset()].
+** The counter is incremented on the first [sqlite3_step()] call of each
+** cycle.
+**
+** [[SQLITE_STMTSTATUS_MEMUSED]] <dt>SQLITE_STMTSTATUS_MEMUSED</dt>
+** <dd>^This is the approximate number of bytes of heap memory
+** used to store the prepared statement. ^This value is not actually
+** a counter, and so the resetFlg parameter to sqlite3_stmt_status()
+** is ignored when the opcode is SQLITE_STMTSTATUS_MEMUSED.
+** </dd>
+** </dl>
+*/
+#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1
+#define SQLITE_STMTSTATUS_SORT 2
+#define SQLITE_STMTSTATUS_AUTOINDEX 3
+#define SQLITE_STMTSTATUS_VM_STEP 4
+#define SQLITE_STMTSTATUS_REPREPARE 5
+#define SQLITE_STMTSTATUS_RUN 6
+#define SQLITE_STMTSTATUS_MEMUSED 99
+
+/*
+** CAPI3REF: Custom Page Cache Object
+**
+** The sqlite3_pcache type is opaque. It is implemented by
+** the pluggable module. The SQLite core has no knowledge of
+** its size or internal structure and never deals with the
+** sqlite3_pcache object except by holding and passing pointers
+** to the object.
+**
+** See [sqlite3_pcache_methods2] for additional information.
+*/
+typedef struct sqlite3_pcache sqlite3_pcache;
+
+/*
+** CAPI3REF: Custom Page Cache Object
+**
+** The sqlite3_pcache_page object represents a single page in the
+** page cache. The page cache will allocate instances of this
+** object. Various methods of the page cache use pointers to instances
+** of this object as parameters or as their return value.
+**
+** See [sqlite3_pcache_methods2] for additional information.
+*/
+typedef struct sqlite3_pcache_page sqlite3_pcache_page;
+struct sqlite3_pcache_page {
+ void *pBuf; /* The content of the page */
+ void *pExtra; /* Extra information associated with the page */
+};
+
+/*
+** CAPI3REF: Application Defined Page Cache.
+** KEYWORDS: {page cache}
+**
+** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can
+** register an alternative page cache implementation by passing in an
+** instance of the sqlite3_pcache_methods2 structure.)^
+** In many applications, most of the heap memory allocated by
+** SQLite is used for the page cache.
+** By implementing a
+** custom page cache using this API, an application can better control
+** the amount of memory consumed by SQLite, the way in which
+** that memory is allocated and released, and the policies used to
+** determine exactly which parts of a database file are cached and for
+** how long.
+**
+** The alternative page cache mechanism is an
+** extreme measure that is only needed by the most demanding applications.
+** The built-in page cache is recommended for most uses.
+**
+** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an
+** internal buffer by SQLite within the call to [sqlite3_config]. Hence
+** the application may discard the parameter after the call to
+** [sqlite3_config()] returns.)^
+**
+** [[the xInit() page cache method]]
+** ^(The xInit() method is called once for each effective
+** call to [sqlite3_initialize()])^
+** (usually only once during the lifetime of the process). ^(The xInit()
+** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^
+** The intent of the xInit() method is to set up global data structures
+** required by the custom page cache implementation.
+** ^(If the xInit() method is NULL, then the
+** built-in default page cache is used instead of the application defined
+** page cache.)^
+**
+** [[the xShutdown() page cache method]]
+** ^The xShutdown() method is called by [sqlite3_shutdown()].
+** It can be used to clean up
+** any outstanding resources before process shutdown, if required.
+** ^The xShutdown() method may be NULL.
+**
+** ^SQLite automatically serializes calls to the xInit method,
+** so the xInit method need not be threadsafe. ^The
+** xShutdown method is only called from [sqlite3_shutdown()] so it does
+** not need to be threadsafe either. All other methods must be threadsafe
+** in multithreaded applications.
+**
+** ^SQLite will never invoke xInit() more than once without an intervening
+** call to xShutdown().
+**
+** [[the xCreate() page cache methods]]
+** ^SQLite invokes the xCreate() method to construct a new cache instance.
+** SQLite will typically create one cache instance for each open database file,
+** though this is not guaranteed. ^The
+** first parameter, szPage, is the size in bytes of the pages that must
+** be allocated by the cache. ^szPage will always a power of two. ^The
+** second parameter szExtra is a number of bytes of extra storage
+** associated with each page cache entry. ^The szExtra parameter will
+** a number less than 250. SQLite will use the
+** extra szExtra bytes on each page to store metadata about the underlying
+** database page on disk. The value passed into szExtra depends
+** on the SQLite version, the target platform, and how SQLite was compiled.
+** ^The third argument to xCreate(), bPurgeable, is true if the cache being
+** created will be used to cache database pages of a file stored on disk, or
+** false if it is used for an in-memory database. The cache implementation
+** does not have to do anything special based with the value of bPurgeable;
+** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will
+** never invoke xUnpin() except to deliberately delete a page.
+** ^In other words, calls to xUnpin() on a cache with bPurgeable set to
+** false will always have the "discard" flag set to true.
+** ^Hence, a cache created with bPurgeable false will
+** never contain any unpinned pages.
+**
+** [[the xCachesize() page cache method]]
+** ^(The xCachesize() method may be called at any time by SQLite to set the
+** suggested maximum cache-size (number of pages stored by) the cache
+** instance passed as the first argument. This is the value configured using
+** the SQLite "[PRAGMA cache_size]" command.)^ As with the bPurgeable
+** parameter, the implementation is not required to do anything with this
+** value; it is advisory only.
+**
+** [[the xPagecount() page cache methods]]
+** The xPagecount() method must return the number of pages currently
+** stored in the cache, both pinned and unpinned.
+**
+** [[the xFetch() page cache methods]]
+** The xFetch() method locates a page in the cache and returns a pointer to
+** an sqlite3_pcache_page object associated with that page, or a NULL pointer.
+** The pBuf element of the returned sqlite3_pcache_page object will be a
+** pointer to a buffer of szPage bytes used to store the content of a
+** single database page. The pExtra element of sqlite3_pcache_page will be
+** a pointer to the szExtra bytes of extra storage that SQLite has requested
+** for each entry in the page cache.
+**
+** The page to be fetched is determined by the key. ^The minimum key value
+** is 1. After it has been retrieved using xFetch, the page is considered
+** to be "pinned".
+**
+** If the requested page is already in the page cache, then the page cache
+** implementation must return a pointer to the page buffer with its content
+** intact. If the requested page is not already in the cache, then the
+** cache implementation should use the value of the createFlag
+** parameter to help it determined what action to take:
+**
+** <table border=1 width=85% align=center>
+** <tr><th> createFlag <th> Behavior when page is not already in cache
+** <tr><td> 0 <td> Do not allocate a new page. Return NULL.
+** <tr><td> 1 <td> Allocate a new page if it easy and convenient to do so.
+** Otherwise return NULL.
+** <tr><td> 2 <td> Make every effort to allocate a new page. Only return
+** NULL if allocating a new page is effectively impossible.
+** </table>
+**
+** ^(SQLite will normally invoke xFetch() with a createFlag of 0 or 1. SQLite
+** will only use a createFlag of 2 after a prior call with a createFlag of 1
+** failed.)^ In between the to xFetch() calls, SQLite may
+** attempt to unpin one or more cache pages by spilling the content of
+** pinned pages to disk and synching the operating system disk cache.
+**
+** [[the xUnpin() page cache method]]
+** ^xUnpin() is called by SQLite with a pointer to a currently pinned page
+** as its second argument. If the third parameter, discard, is non-zero,
+** then the page must be evicted from the cache.
+** ^If the discard parameter is
+** zero, then the page may be discarded or retained at the discretion of
+** page cache implementation. ^The page cache implementation
+** may choose to evict unpinned pages at any time.
+**
+** The cache must not perform any reference counting. A single
+** call to xUnpin() unpins the page regardless of the number of prior calls
+** to xFetch().
+**
+** [[the xRekey() page cache methods]]
+** The xRekey() method is used to change the key value associated with the
+** page passed as the second argument. If the cache
+** previously contains an entry associated with newKey, it must be
+** discarded. ^Any prior cache entry associated with newKey is guaranteed not
+** to be pinned.
+**
+** When SQLite calls the xTruncate() method, the cache must discard all
+** existing cache entries with page numbers (keys) greater than or equal
+** to the value of the iLimit parameter passed to xTruncate(). If any
+** of these pages are pinned, they are implicitly unpinned, meaning that
+** they can be safely discarded.
+**
+** [[the xDestroy() page cache method]]
+** ^The xDestroy() method is used to delete a cache allocated by xCreate().
+** All resources associated with the specified cache should be freed. ^After
+** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*]
+** handle invalid, and will not use it with any other sqlite3_pcache_methods2
+** functions.
+**
+** [[the xShrink() page cache method]]
+** ^SQLite invokes the xShrink() method when it wants the page cache to
+** free up as much of heap memory as possible. The page cache implementation
+** is not obligated to free any memory, but well-behaved implementations should
+** do their best.
+*/
+typedef struct sqlite3_pcache_methods2 sqlite3_pcache_methods2;
+struct sqlite3_pcache_methods2 {
+ int iVersion;
+ void *pArg;
+ int (*xInit)(void*);
+ void (*xShutdown)(void*);
+ sqlite3_pcache *(*xCreate)(int szPage, int szExtra, int bPurgeable);
+ void (*xCachesize)(sqlite3_pcache*, int nCachesize);
+ int (*xPagecount)(sqlite3_pcache*);
+ sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
+ void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard);
+ void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*,
+ unsigned oldKey, unsigned newKey);
+ void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
+ void (*xDestroy)(sqlite3_pcache*);
+ void (*xShrink)(sqlite3_pcache*);
+};
+
+/*
+** This is the obsolete pcache_methods object that has now been replaced
+** by sqlite3_pcache_methods2. This object is not used by SQLite. It is
+** retained in the header file for backwards compatibility only.
+*/
+typedef struct sqlite3_pcache_methods sqlite3_pcache_methods;
+struct sqlite3_pcache_methods {
+ void *pArg;
+ int (*xInit)(void*);
+ void (*xShutdown)(void*);
+ sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable);
+ void (*xCachesize)(sqlite3_pcache*, int nCachesize);
+ int (*xPagecount)(sqlite3_pcache*);
+ void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
+ void (*xUnpin)(sqlite3_pcache*, void*, int discard);
+ void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey);
+ void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
+ void (*xDestroy)(sqlite3_pcache*);
+};
+
+
+/*
+** CAPI3REF: Online Backup Object
+**
+** The sqlite3_backup object records state information about an ongoing
+** online backup operation. ^The sqlite3_backup object is created by
+** a call to [sqlite3_backup_init()] and is destroyed by a call to
+** [sqlite3_backup_finish()].
+**
+** See Also: [Using the SQLite Online Backup API]
+*/
+typedef struct sqlite3_backup sqlite3_backup;
+
+/*
+** CAPI3REF: Online Backup API.
+**
+** The backup API copies the content of one database into another.
+** It is useful either for creating backups of databases or
+** for copying in-memory databases to or from persistent files.
+**
+** See Also: [Using the SQLite Online Backup API]
+**
+** ^SQLite holds a write transaction open on the destination database file
+** for the duration of the backup operation.
+** ^The source database is read-locked only while it is being read;
+** it is not locked continuously for the entire backup operation.
+** ^Thus, the backup may be performed on a live source database without
+** preventing other database connections from
+** reading or writing to the source database while the backup is underway.
+**
+** ^(To perform a backup operation:
+** <ol>
+** <li><b>sqlite3_backup_init()</b> is called once to initialize the
+** backup,
+** <li><b>sqlite3_backup_step()</b> is called one or more times to transfer
+** the data between the two databases, and finally
+** <li><b>sqlite3_backup_finish()</b> is called to release all resources
+** associated with the backup operation.
+** </ol>)^
+** There should be exactly one call to sqlite3_backup_finish() for each
+** successful call to sqlite3_backup_init().
+**
+** [[sqlite3_backup_init()]] <b>sqlite3_backup_init()</b>
+**
+** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the
+** [database connection] associated with the destination database
+** and the database name, respectively.
+** ^The database name is "main" for the main database, "temp" for the
+** temporary database, or the name specified after the AS keyword in
+** an [ATTACH] statement for an attached database.
+** ^The S and M arguments passed to
+** sqlite3_backup_init(D,N,S,M) identify the [database connection]
+** and database name of the source database, respectively.
+** ^The source and destination [database connections] (parameters S and D)
+** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
+** an error.
+**
+** ^A call to sqlite3_backup_init() will fail, returning NULL, if
+** there is already a read or read-write transaction open on the
+** destination database.
+**
+** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
+** returned and an error code and error message are stored in the
+** destination [database connection] D.
+** ^The error code and message for the failed call to sqlite3_backup_init()
+** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or
+** [sqlite3_errmsg16()] functions.
+** ^A successful call to sqlite3_backup_init() returns a pointer to an
+** [sqlite3_backup] object.
+** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and
+** sqlite3_backup_finish() functions to perform the specified backup
+** operation.
+**
+** [[sqlite3_backup_step()]] <b>sqlite3_backup_step()</b>
+**
+** ^Function sqlite3_backup_step(B,N) will copy up to N pages between
+** the source and destination databases specified by [sqlite3_backup] object B.
+** ^If N is negative, all remaining source pages are copied.
+** ^If sqlite3_backup_step(B,N) successfully copies N pages and there
+** are still more pages to be copied, then the function returns [SQLITE_OK].
+** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages
+** from source to destination, then it returns [SQLITE_DONE].
+** ^If an error occurs while running sqlite3_backup_step(B,N),
+** then an [error code] is returned. ^As well as [SQLITE_OK] and
+** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY],
+** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an
+** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code.
+**
+** ^(The sqlite3_backup_step() might return [SQLITE_READONLY] if
+** <ol>
+** <li> the destination database was opened read-only, or
+** <li> the destination database is using write-ahead-log journaling
+** and the destination and source page sizes differ, or
+** <li> the destination database is an in-memory database and the
+** destination and source page sizes differ.
+** </ol>)^
+**
+** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then
+** the [sqlite3_busy_handler | busy-handler function]
+** is invoked (if one is specified). ^If the
+** busy-handler returns non-zero before the lock is available, then
+** [SQLITE_BUSY] is returned to the caller. ^In this case the call to
+** sqlite3_backup_step() can be retried later. ^If the source
+** [database connection]
+** is being used to write to the source database when sqlite3_backup_step()
+** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this
+** case the call to sqlite3_backup_step() can be retried later on. ^(If
+** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or
+** [SQLITE_READONLY] is returned, then
+** there is no point in retrying the call to sqlite3_backup_step(). These
+** errors are considered fatal.)^ The application must accept
+** that the backup operation has failed and pass the backup operation handle
+** to the sqlite3_backup_finish() to release associated resources.
+**
+** ^The first call to sqlite3_backup_step() obtains an exclusive lock
+** on the destination file. ^The exclusive lock is not released until either
+** sqlite3_backup_finish() is called or the backup operation is complete
+** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to
+** sqlite3_backup_step() obtains a [shared lock] on the source database that
+** lasts for the duration of the sqlite3_backup_step() call.
+** ^Because the source database is not locked between calls to
+** sqlite3_backup_step(), the source database may be modified mid-way
+** through the backup process. ^If the source database is modified by an
+** external process or via a database connection other than the one being
+** used by the backup operation, then the backup will be automatically
+** restarted by the next call to sqlite3_backup_step(). ^If the source
+** database is modified by the using the same database connection as is used
+** by the backup operation, then the backup database is automatically
+** updated at the same time.
+**
+** [[sqlite3_backup_finish()]] <b>sqlite3_backup_finish()</b>
+**
+** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the
+** application wishes to abandon the backup operation, the application
+** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish().
+** ^The sqlite3_backup_finish() interfaces releases all
+** resources associated with the [sqlite3_backup] object.
+** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any
+** active write-transaction on the destination database is rolled back.
+** The [sqlite3_backup] object is invalid
+** and may not be used following a call to sqlite3_backup_finish().
+**
+** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no
+** sqlite3_backup_step() errors occurred, regardless or whether or not
+** sqlite3_backup_step() completed.
+** ^If an out-of-memory condition or IO error occurred during any prior
+** sqlite3_backup_step() call on the same [sqlite3_backup] object, then
+** sqlite3_backup_finish() returns the corresponding [error code].
+**
+** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step()
+** is not a permanent error and does not affect the return value of
+** sqlite3_backup_finish().
+**
+** [[sqlite3_backup_remaining()]] [[sqlite3_backup_pagecount()]]
+** <b>sqlite3_backup_remaining() and sqlite3_backup_pagecount()</b>
+**
+** ^The sqlite3_backup_remaining() routine returns the number of pages still
+** to be backed up at the conclusion of the most recent sqlite3_backup_step().
+** ^The sqlite3_backup_pagecount() routine returns the total number of pages
+** in the source database at the conclusion of the most recent
+** sqlite3_backup_step().
+** ^(The values returned by these functions are only updated by
+** sqlite3_backup_step(). If the source database is modified in a way that
+** changes the size of the source database or the number of pages remaining,
+** those changes are not reflected in the output of sqlite3_backup_pagecount()
+** and sqlite3_backup_remaining() until after the next
+** sqlite3_backup_step().)^
+**
+** <b>Concurrent Usage of Database Handles</b>
+**
+** ^The source [database connection] may be used by the application for other
+** purposes while a backup operation is underway or being initialized.
+** ^If SQLite is compiled and configured to support threadsafe database
+** connections, then the source database connection may be used concurrently
+** from within other threads.
+**
+** However, the application must guarantee that the destination
+** [database connection] is not passed to any other API (by any thread) after
+** sqlite3_backup_init() is called and before the corresponding call to
+** sqlite3_backup_finish(). SQLite does not currently check to see
+** if the application incorrectly accesses the destination [database connection]
+** and so no error code is reported, but the operations may malfunction
+** nevertheless. Use of the destination database connection while a
+** backup is in progress might also also cause a mutex deadlock.
+**
+** If running in [shared cache mode], the application must
+** guarantee that the shared cache used by the destination database
+** is not accessed while the backup is running. In practice this means
+** that the application must guarantee that the disk file being
+** backed up to is not accessed by any connection within the process,
+** not just the specific connection that was passed to sqlite3_backup_init().
+**
+** The [sqlite3_backup] object itself is partially threadsafe. Multiple
+** threads may safely make multiple concurrent calls to sqlite3_backup_step().
+** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount()
+** APIs are not strictly speaking threadsafe. If they are invoked at the
+** same time as another thread is invoking sqlite3_backup_step() it is
+** possible that they return invalid values.
+*/
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
+ sqlite3 *pDest, /* Destination database handle */
+ const char *zDestName, /* Destination database name */
+ sqlite3 *pSource, /* Source database handle */
+ const char *zSourceName /* Source database name */
+);
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage);
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
+
+/*
+** CAPI3REF: Unlock Notification
+** METHOD: sqlite3
+**
+** ^When running in shared-cache mode, a database operation may fail with
+** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
+** individual tables within the shared-cache cannot be obtained. See
+** [SQLite Shared-Cache Mode] for a description of shared-cache locking.
+** ^This API may be used to register a callback that SQLite will invoke
+** when the connection currently holding the required lock relinquishes it.
+** ^This API is only available if the library was compiled with the
+** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined.
+**
+** See Also: [Using the SQLite Unlock Notification Feature].
+**
+** ^Shared-cache locks are released when a database connection concludes
+** its current transaction, either by committing it or rolling it back.
+**
+** ^When a connection (known as the blocked connection) fails to obtain a
+** shared-cache lock and SQLITE_LOCKED is returned to the caller, the
+** identity of the database connection (the blocking connection) that
+** has locked the required resource is stored internally. ^After an
+** application receives an SQLITE_LOCKED error, it may call the
+** sqlite3_unlock_notify() method with the blocked connection handle as
+** the first argument to register for a callback that will be invoked
+** when the blocking connections current transaction is concluded. ^The
+** callback is invoked from within the [sqlite3_step] or [sqlite3_close]
+** call that concludes the blocking connections transaction.
+**
+** ^(If sqlite3_unlock_notify() is called in a multi-threaded application,
+** there is a chance that the blocking connection will have already
+** concluded its transaction by the time sqlite3_unlock_notify() is invoked.
+** If this happens, then the specified callback is invoked immediately,
+** from within the call to sqlite3_unlock_notify().)^
+**
+** ^If the blocked connection is attempting to obtain a write-lock on a
+** shared-cache table, and more than one other connection currently holds
+** a read-lock on the same table, then SQLite arbitrarily selects one of
+** the other connections to use as the blocking connection.
+**
+** ^(There may be at most one unlock-notify callback registered by a
+** blocked connection. If sqlite3_unlock_notify() is called when the
+** blocked connection already has a registered unlock-notify callback,
+** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is
+** called with a NULL pointer as its second argument, then any existing
+** unlock-notify callback is canceled. ^The blocked connections
+** unlock-notify callback may also be canceled by closing the blocked
+** connection using [sqlite3_close()].
+**
+** The unlock-notify callback is not reentrant. If an application invokes
+** any sqlite3_xxx API functions from within an unlock-notify callback, a
+** crash or deadlock may be the result.
+**
+** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always
+** returns SQLITE_OK.
+**
+** <b>Callback Invocation Details</b>
+**
+** When an unlock-notify callback is registered, the application provides a
+** single void* pointer that is passed to the callback when it is invoked.
+** However, the signature of the callback function allows SQLite to pass
+** it an array of void* context pointers. The first argument passed to
+** an unlock-notify callback is a pointer to an array of void* pointers,
+** and the second is the number of entries in the array.
+**
+** When a blocking connections transaction is concluded, there may be
+** more than one blocked connection that has registered for an unlock-notify
+** callback. ^If two or more such blocked connections have specified the
+** same callback function, then instead of invoking the callback function
+** multiple times, it is invoked once with the set of void* context pointers
+** specified by the blocked connections bundled together into an array.
+** This gives the application an opportunity to prioritize any actions
+** related to the set of unblocked database connections.
+**
+** <b>Deadlock Detection</b>
+**
+** Assuming that after registering for an unlock-notify callback a
+** database waits for the callback to be issued before taking any further
+** action (a reasonable assumption), then using this API may cause the
+** application to deadlock. For example, if connection X is waiting for
+** connection Y's transaction to be concluded, and similarly connection
+** Y is waiting on connection X's transaction, then neither connection
+** will proceed and the system may remain deadlocked indefinitely.
+**
+** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock
+** detection. ^If a given call to sqlite3_unlock_notify() would put the
+** system in a deadlocked state, then SQLITE_LOCKED is returned and no
+** unlock-notify callback is registered. The system is said to be in
+** a deadlocked state if connection A has registered for an unlock-notify
+** callback on the conclusion of connection B's transaction, and connection
+** B has itself registered for an unlock-notify callback when connection
+** A's transaction is concluded. ^Indirect deadlock is also detected, so
+** the system is also considered to be deadlocked if connection B has
+** registered for an unlock-notify callback on the conclusion of connection
+** C's transaction, where connection C is waiting on connection A. ^Any
+** number of levels of indirection are allowed.
+**
+** <b>The "DROP TABLE" Exception</b>
+**
+** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost
+** always appropriate to call sqlite3_unlock_notify(). There is however,
+** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement,
+** SQLite checks if there are any currently executing SELECT statements
+** that belong to the same connection. If there are, SQLITE_LOCKED is
+** returned. In this case there is no "blocking connection", so invoking
+** sqlite3_unlock_notify() results in the unlock-notify callback being
+** invoked immediately. If the application then re-attempts the "DROP TABLE"
+** or "DROP INDEX" query, an infinite loop might be the result.
+**
+** One way around this problem is to check the extended error code returned
+** by an sqlite3_step() call. ^(If there is a blocking connection, then the
+** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in
+** the special "DROP TABLE/INDEX" case, the extended error code is just
+** SQLITE_LOCKED.)^
+*/
+SQLITE_API int sqlite3_unlock_notify(
+ sqlite3 *pBlocked, /* Waiting connection */
+ void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */
+ void *pNotifyArg /* Argument to pass to xNotify */
+);
+
+
+/*
+** CAPI3REF: String Comparison
+**
+** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications
+** and extensions to compare the contents of two buffers containing UTF-8
+** strings in a case-independent fashion, using the same definition of "case
+** independence" that SQLite uses internally when comparing identifiers.
+*/
+SQLITE_API int sqlite3_stricmp(const char *, const char *);
+SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
+
+/*
+** CAPI3REF: String Globbing
+*
+** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if
+** string X matches the [GLOB] pattern P.
+** ^The definition of [GLOB] pattern matching used in
+** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
+** SQL dialect understood by SQLite. ^The [sqlite3_strglob(P,X)] function
+** is case sensitive.
+**
+** Note that this routine returns zero on a match and non-zero if the strings
+** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strlike()].
+*/
+SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
+
+/*
+** CAPI3REF: String LIKE Matching
+*
+** ^The [sqlite3_strlike(P,X,E)] interface returns zero if and only if
+** string X matches the [LIKE] pattern P with escape character E.
+** ^The definition of [LIKE] pattern matching used in
+** [sqlite3_strlike(P,X,E)] is the same as for the "X LIKE P ESCAPE E"
+** operator in the SQL dialect understood by SQLite. ^For "X LIKE P" without
+** the ESCAPE clause, set the E parameter of [sqlite3_strlike(P,X,E)] to 0.
+** ^As with the LIKE operator, the [sqlite3_strlike(P,X,E)] function is case
+** insensitive - equivalent upper and lower case ASCII characters match
+** one another.
+**
+** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though
+** only ASCII characters are case folded.
+**
+** Note that this routine returns zero on a match and non-zero if the strings
+** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strglob()].
+*/
+SQLITE_API int sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
+
+/*
+** CAPI3REF: Error Logging Interface
+**
+** ^The [sqlite3_log()] interface writes a message into the [error log]
+** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].
+** ^If logging is enabled, the zFormat string and subsequent arguments are
+** used with [sqlite3_snprintf()] to generate the final output string.
+**
+** The sqlite3_log() interface is intended for use by extensions such as
+** virtual tables, collating functions, and SQL functions. While there is
+** nothing to prevent an application from calling sqlite3_log(), doing so
+** is considered bad form.
+**
+** The zFormat string must not be NULL.
+**
+** To avoid deadlocks and other threading problems, the sqlite3_log() routine
+** will not use dynamically allocated memory. The log message is stored in
+** a fixed-length buffer on the stack. If the log message is longer than
+** a few hundred characters, it will be truncated to the length of the
+** buffer.
+*/
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
+
+/*
+** CAPI3REF: Write-Ahead Log Commit Hook
+** METHOD: sqlite3
+**
+** ^The [sqlite3_wal_hook()] function is used to register a callback that
+** is invoked each time data is committed to a database in wal mode.
+**
+** ^(The callback is invoked by SQLite after the commit has taken place and
+** the associated write-lock on the database released)^, so the implementation
+** may read, write or [checkpoint] the database as required.
+**
+** ^The first parameter passed to the callback function when it is invoked
+** is a copy of the third parameter passed to sqlite3_wal_hook() when
+** registering the callback. ^The second is a copy of the database handle.
+** ^The third parameter is the name of the database that was written to -
+** either "main" or the name of an [ATTACH]-ed database. ^The fourth parameter
+** is the number of pages currently in the write-ahead log file,
+** including those that were just committed.
+**
+** The callback function should normally return [SQLITE_OK]. ^If an error
+** code is returned, that error will propagate back up through the
+** SQLite code base to cause the statement that provoked the callback
+** to report an error, though the commit will have still occurred. If the
+** callback returns [SQLITE_ROW] or [SQLITE_DONE], or if it returns a value
+** that does not correspond to any valid SQLite error code, the results
+** are undefined.
+**
+** A single database handle may have at most a single write-ahead log callback
+** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any
+** previously registered write-ahead log callback. ^Note that the
+** [sqlite3_wal_autocheckpoint()] interface and the
+** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
+** overwrite any prior [sqlite3_wal_hook()] settings.
+*/
+SQLITE_API void *sqlite3_wal_hook(
+ sqlite3*,
+ int(*)(void *,sqlite3*,const char*,int),
+ void*
+);
+
+/*
+** CAPI3REF: Configure an auto-checkpoint
+** METHOD: sqlite3
+**
+** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around
+** [sqlite3_wal_hook()] that causes any database on [database connection] D
+** to automatically [checkpoint]
+** after committing a transaction if there are N or
+** more frames in the [write-ahead log] file. ^Passing zero or
+** a negative value as the nFrame parameter disables automatic
+** checkpoints entirely.
+**
+** ^The callback registered by this function replaces any existing callback
+** registered using [sqlite3_wal_hook()]. ^Likewise, registering a callback
+** using [sqlite3_wal_hook()] disables the automatic checkpoint mechanism
+** configured by this function.
+**
+** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
+** from SQL.
+**
+** ^Checkpoints initiated by this mechanism are
+** [sqlite3_wal_checkpoint_v2|PASSIVE].
+**
+** ^Every new [database connection] defaults to having the auto-checkpoint
+** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
+** pages. The use of this interface
+** is only necessary if the default setting is found to be suboptimal
+** for a particular application.
+*/
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
+
+/*
+** CAPI3REF: Checkpoint a database
+** METHOD: sqlite3
+**
+** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to
+** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^
+**
+** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the
+** [write-ahead log] for database X on [database connection] D to be
+** transferred into the database file and for the write-ahead log to
+** be reset. See the [checkpointing] documentation for addition
+** information.
+**
+** This interface used to be the only way to cause a checkpoint to
+** occur. But then the newer and more powerful [sqlite3_wal_checkpoint_v2()]
+** interface was added. This interface is retained for backwards
+** compatibility and as a convenience for applications that need to manually
+** start a callback but which do not need the full power (and corresponding
+** complication) of [sqlite3_wal_checkpoint_v2()].
+*/
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
+
+/*
+** CAPI3REF: Checkpoint a database
+** METHOD: sqlite3
+**
+** ^(The sqlite3_wal_checkpoint_v2(D,X,M,L,C) interface runs a checkpoint
+** operation on database X of [database connection] D in mode M. Status
+** information is written back into integers pointed to by L and C.)^
+** ^(The M parameter must be a valid [checkpoint mode]:)^
+**
+** <dl>
+** <dt>SQLITE_CHECKPOINT_PASSIVE<dd>
+** ^Checkpoint as many frames as possible without waiting for any database
+** readers or writers to finish, then sync the database file if all frames
+** in the log were checkpointed. ^The [busy-handler callback]
+** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode.
+** ^On the other hand, passive mode might leave the checkpoint unfinished
+** if there are concurrent readers or writers.
+**
+** <dt>SQLITE_CHECKPOINT_FULL<dd>
+** ^This mode blocks (it invokes the
+** [sqlite3_busy_handler|busy-handler callback]) until there is no
+** database writer and all readers are reading from the most recent database
+** snapshot. ^It then checkpoints all frames in the log file and syncs the
+** database file. ^This mode blocks new database writers while it is pending,
+** but new database readers are allowed to continue unimpeded.
+**
+** <dt>SQLITE_CHECKPOINT_RESTART<dd>
+** ^This mode works the same way as SQLITE_CHECKPOINT_FULL with the addition
+** that after checkpointing the log file it blocks (calls the
+** [busy-handler callback])
+** until all readers are reading from the database file only. ^This ensures
+** that the next writer will restart the log file from the beginning.
+** ^Like SQLITE_CHECKPOINT_FULL, this mode blocks new
+** database writer attempts while it is pending, but does not impede readers.
+**
+** <dt>SQLITE_CHECKPOINT_TRUNCATE<dd>
+** ^This mode works the same way as SQLITE_CHECKPOINT_RESTART with the
+** addition that it also truncates the log file to zero bytes just prior
+** to a successful return.
+** </dl>
+**
+** ^If pnLog is not NULL, then *pnLog is set to the total number of frames in
+** the log file or to -1 if the checkpoint could not run because
+** of an error or because the database is not in [WAL mode]. ^If pnCkpt is not
+** NULL,then *pnCkpt is set to the total number of checkpointed frames in the
+** log file (including any that were already checkpointed before the function
+** was called) or to -1 if the checkpoint could not run due to an error or
+** because the database is not in WAL mode. ^Note that upon successful
+** completion of an SQLITE_CHECKPOINT_TRUNCATE, the log file will have been
+** truncated to zero bytes and so both *pnLog and *pnCkpt will be set to zero.
+**
+** ^All calls obtain an exclusive "checkpoint" lock on the database file. ^If
+** any other process is running a checkpoint operation at the same time, the
+** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a
+** busy-handler configured, it will not be invoked in this case.
+**
+** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the
+** exclusive "writer" lock on the database file. ^If the writer lock cannot be
+** obtained immediately, and a busy-handler is configured, it is invoked and
+** the writer lock retried until either the busy-handler returns 0 or the lock
+** is successfully obtained. ^The busy-handler is also invoked while waiting for
+** database readers as described above. ^If the busy-handler returns 0 before
+** the writer lock is obtained or while waiting for database readers, the
+** checkpoint operation proceeds from that point in the same way as
+** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible
+** without blocking any further. ^SQLITE_BUSY is returned in this case.
+**
+** ^If parameter zDb is NULL or points to a zero length string, then the
+** specified operation is attempted on all WAL databases [attached] to
+** [database connection] db. In this case the
+** values written to output parameters *pnLog and *pnCkpt are undefined. ^If
+** an SQLITE_BUSY error is encountered when processing one or more of the
+** attached WAL databases, the operation is still attempted on any remaining
+** attached databases and SQLITE_BUSY is returned at the end. ^If any other
+** error occurs while processing an attached database, processing is abandoned
+** and the error code is returned to the caller immediately. ^If no error
+** (SQLITE_BUSY or otherwise) is encountered while processing the attached
+** databases, SQLITE_OK is returned.
+**
+** ^If database zDb is the name of an attached database that is not in WAL
+** mode, SQLITE_OK is returned and both *pnLog and *pnCkpt set to -1. ^If
+** zDb is not NULL (or a zero length string) and is not the name of any
+** attached database, SQLITE_ERROR is returned to the caller.
+**
+** ^Unless it returns SQLITE_MISUSE,
+** the sqlite3_wal_checkpoint_v2() interface
+** sets the error information that is queried by
+** [sqlite3_errcode()] and [sqlite3_errmsg()].
+**
+** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
+** from SQL.
+*/
+SQLITE_API int sqlite3_wal_checkpoint_v2(
+ sqlite3 *db, /* Database handle */
+ const char *zDb, /* Name of attached database (or NULL) */
+ int eMode, /* SQLITE_CHECKPOINT_* value */
+ int *pnLog, /* OUT: Size of WAL log in frames */
+ int *pnCkpt /* OUT: Total number of frames checkpointed */
+);
+
+/*
+** CAPI3REF: Checkpoint Mode Values
+** KEYWORDS: {checkpoint mode}
+**
+** These constants define all valid values for the "checkpoint mode" passed
+** as the third parameter to the [sqlite3_wal_checkpoint_v2()] interface.
+** See the [sqlite3_wal_checkpoint_v2()] documentation for details on the
+** meaning of each of these checkpoint modes.
+*/
+#define SQLITE_CHECKPOINT_PASSIVE 0 /* Do as much as possible w/o blocking */
+#define SQLITE_CHECKPOINT_FULL 1 /* Wait for writers, then checkpoint */
+#define SQLITE_CHECKPOINT_RESTART 2 /* Like FULL but wait for for readers */
+#define SQLITE_CHECKPOINT_TRUNCATE 3 /* Like RESTART but also truncate WAL */
+
+/*
+** CAPI3REF: Virtual Table Interface Configuration
+**
+** This function may be called by either the [xConnect] or [xCreate] method
+** of a [virtual table] implementation to configure
+** various facets of the virtual table interface.
+**
+** If this interface is invoked outside the context of an xConnect or
+** xCreate virtual table method then the behavior is undefined.
+**
+** At present, there is only one option that may be configured using
+** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].) Further options
+** may be added in the future.
+*/
+SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
+
+/*
+** CAPI3REF: Virtual Table Configuration Options
+**
+** These macros define the various options to the
+** [sqlite3_vtab_config()] interface that [virtual table] implementations
+** can use to customize and optimize their behavior.
+**
+** <dl>
+** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT
+** <dd>Calls of the form
+** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported,
+** where X is an integer. If X is zero, then the [virtual table] whose
+** [xCreate] or [xConnect] method invoked [sqlite3_vtab_config()] does not
+** support constraints. In this configuration (which is the default) if
+** a call to the [xUpdate] method returns [SQLITE_CONSTRAINT], then the entire
+** statement is rolled back as if [ON CONFLICT | OR ABORT] had been
+** specified as part of the users SQL statement, regardless of the actual
+** ON CONFLICT mode specified.
+**
+** If X is non-zero, then the virtual table implementation guarantees
+** that if [xUpdate] returns [SQLITE_CONSTRAINT], it will do so before
+** any modifications to internal or persistent data structures have been made.
+** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite
+** is able to roll back a statement or database transaction, and abandon
+** or continue processing the current SQL statement as appropriate.
+** If the ON CONFLICT mode is REPLACE and the [xUpdate] method returns
+** [SQLITE_CONSTRAINT], SQLite handles this as if the ON CONFLICT mode
+** had been ABORT.
+**
+** Virtual table implementations that are required to handle OR REPLACE
+** must do so within the [xUpdate] method. If a call to the
+** [sqlite3_vtab_on_conflict()] function indicates that the current ON
+** CONFLICT policy is REPLACE, the virtual table implementation should
+** silently replace the appropriate rows within the xUpdate callback and
+** return SQLITE_OK. Or, if this is not possible, it may return
+** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT
+** constraint handling.
+** </dl>
+*/
+#define SQLITE_VTAB_CONSTRAINT_SUPPORT 1
+
+/*
+** CAPI3REF: Determine The Virtual Table Conflict Policy
+**
+** This function may only be called from within a call to the [xUpdate] method
+** of a [virtual table] implementation for an INSERT or UPDATE operation. ^The
+** value returned is one of [SQLITE_ROLLBACK], [SQLITE_IGNORE], [SQLITE_FAIL],
+** [SQLITE_ABORT], or [SQLITE_REPLACE], according to the [ON CONFLICT] mode
+** of the SQL statement that triggered the call to the [xUpdate] method of the
+** [virtual table].
+*/
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
+
+/*
+** CAPI3REF: Conflict resolution modes
+** KEYWORDS: {conflict resolution mode}
+**
+** These constants are returned by [sqlite3_vtab_on_conflict()] to
+** inform a [virtual table] implementation what the [ON CONFLICT] mode
+** is for the SQL statement being evaluated.
+**
+** Note that the [SQLITE_IGNORE] constant is also used as a potential
+** return value from the [sqlite3_set_authorizer()] callback and that
+** [SQLITE_ABORT] is also a [result code].
+*/
+#define SQLITE_ROLLBACK 1
+/* #define SQLITE_IGNORE 2 // Also used by sqlite3_authorizer() callback */
+#define SQLITE_FAIL 3
+/* #define SQLITE_ABORT 4 // Also an error code */
+#define SQLITE_REPLACE 5
+
+/*
+** CAPI3REF: Prepared Statement Scan Status Opcodes
+** KEYWORDS: {scanstatus options}
+**
+** The following constants can be used for the T parameter to the
+** [sqlite3_stmt_scanstatus(S,X,T,V)] interface. Each constant designates a
+** different metric for sqlite3_stmt_scanstatus() to return.
+**
+** When the value returned to V is a string, space to hold that string is
+** managed by the prepared statement S and will be automatically freed when
+** S is finalized.
+**
+** <dl>
+** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt>
+** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be
+** set to the total number of times that the X-th loop has run.</dd>
+**
+** [[SQLITE_SCANSTAT_NVISIT]] <dt>SQLITE_SCANSTAT_NVISIT</dt>
+** <dd>^The [sqlite3_int64] variable pointed to by the T parameter will be set
+** to the total number of rows examined by all iterations of the X-th loop.</dd>
+**
+** [[SQLITE_SCANSTAT_EST]] <dt>SQLITE_SCANSTAT_EST</dt>
+** <dd>^The "double" variable pointed to by the T parameter will be set to the
+** query planner's estimate for the average number of rows output from each
+** iteration of the X-th loop. If the query planner's estimates was accurate,
+** then this value will approximate the quotient NVISIT/NLOOP and the
+** product of this value for all prior loops with the same SELECTID will
+** be the NLOOP value for the current loop.
+**
+** [[SQLITE_SCANSTAT_NAME]] <dt>SQLITE_SCANSTAT_NAME</dt>
+** <dd>^The "const char *" variable pointed to by the T parameter will be set
+** to a zero-terminated UTF-8 string containing the name of the index or table
+** used for the X-th loop.
+**
+** [[SQLITE_SCANSTAT_EXPLAIN]] <dt>SQLITE_SCANSTAT_EXPLAIN</dt>
+** <dd>^The "const char *" variable pointed to by the T parameter will be set
+** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN]
+** description for the X-th loop.
+**
+** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECT</dt>
+** <dd>^The "int" variable pointed to by the T parameter will be set to the
+** "select-id" for the X-th loop. The select-id identifies which query or
+** subquery the loop is part of. The main query has a select-id of zero.
+** The select-id is the same value as is output in the first column
+** of an [EXPLAIN QUERY PLAN] query.
+** </dl>
+*/
+#define SQLITE_SCANSTAT_NLOOP 0
+#define SQLITE_SCANSTAT_NVISIT 1
+#define SQLITE_SCANSTAT_EST 2
+#define SQLITE_SCANSTAT_NAME 3
+#define SQLITE_SCANSTAT_EXPLAIN 4
+#define SQLITE_SCANSTAT_SELECTID 5
+
+/*
+** CAPI3REF: Prepared Statement Scan Status
+** METHOD: sqlite3_stmt
+**
+** This interface returns information about the predicted and measured
+** performance for pStmt. Advanced applications can use this
+** interface to compare the predicted and the measured performance and
+** issue warnings and/or rerun [ANALYZE] if discrepancies are found.
+**
+** Since this interface is expected to be rarely used, it is only
+** available if SQLite is compiled using the [SQLITE_ENABLE_STMT_SCANSTATUS]
+** compile-time option.
+**
+** The "iScanStatusOp" parameter determines which status information to return.
+** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior
+** of this interface is undefined.
+** ^The requested measurement is written into a variable pointed to by
+** the "pOut" parameter.
+** Parameter "idx" identifies the specific loop to retrieve statistics for.
+** Loops are numbered starting from zero. ^If idx is out of range - less than
+** zero or greater than or equal to the total number of loops used to implement
+** the statement - a non-zero value is returned and the variable that pOut
+** points to is unchanged.
+**
+** ^Statistics might not be available for all loops in all statements. ^In cases
+** where there exist loops with no available statistics, this function behaves
+** as if the loop did not exist - it returns non-zero and leave the variable
+** that pOut points to unchanged.
+**
+** See also: [sqlite3_stmt_scanstatus_reset()]
+*/
+SQLITE_API int sqlite3_stmt_scanstatus(
+ sqlite3_stmt *pStmt, /* Prepared statement for which info desired */
+ int idx, /* Index of loop to report on */
+ int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */
+ void *pOut /* Result written here */
+);
+
+/*
+** CAPI3REF: Zero Scan-Status Counters
+** METHOD: sqlite3_stmt
+**
+** ^Zero all [sqlite3_stmt_scanstatus()] related event counters.
+**
+** This API is only available if the library is built with pre-processor
+** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
+*/
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+
+/*
+** CAPI3REF: Flush caches to disk mid-transaction
+**
+** ^If a write-transaction is open on [database connection] D when the
+** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
+** pages in the pager-cache that are not currently in use are written out
+** to disk. A dirty page may be in use if a database cursor created by an
+** active SQL statement is reading from it, or if it is page 1 of a database
+** file (page 1 is always "in use"). ^The [sqlite3_db_cacheflush(D)]
+** interface flushes caches for all schemas - "main", "temp", and
+** any [attached] databases.
+**
+** ^If this function needs to obtain extra database locks before dirty pages
+** can be flushed to disk, it does so. ^If those locks cannot be obtained
+** immediately and there is a busy-handler callback configured, it is invoked
+** in the usual manner. ^If the required lock still cannot be obtained, then
+** the database is skipped and an attempt made to flush any dirty pages
+** belonging to the next (if any) database. ^If any databases are skipped
+** because locks cannot be obtained, but no other error occurs, this
+** function returns SQLITE_BUSY.
+**
+** ^If any other error occurs while flushing dirty pages to disk (for
+** example an IO error or out-of-memory condition), then processing is
+** abandoned and an SQLite [error code] is returned to the caller immediately.
+**
+** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK.
+**
+** ^This function does not set the database handle error code or message
+** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
+*/
+SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
+
+/*
+** CAPI3REF: The pre-update hook.
+**
+** ^These interfaces are only available if SQLite is compiled using the
+** [SQLITE_ENABLE_PREUPDATE_HOOK] compile-time option.
+**
+** ^The [sqlite3_preupdate_hook()] interface registers a callback function
+** that is invoked prior to each [INSERT], [UPDATE], and [DELETE] operation
+** on a database table.
+** ^At most one preupdate hook may be registered at a time on a single
+** [database connection]; each call to [sqlite3_preupdate_hook()] overrides
+** the previous setting.
+** ^The preupdate hook is disabled by invoking [sqlite3_preupdate_hook()]
+** with a NULL pointer as the second parameter.
+** ^The third parameter to [sqlite3_preupdate_hook()] is passed through as
+** the first parameter to callbacks.
+**
+** ^The preupdate hook only fires for changes to real database tables; the
+** preupdate hook is not invoked for changes to [virtual tables] or to
+** system tables like sqlite_master or sqlite_stat1.
+**
+** ^The second parameter to the preupdate callback is a pointer to
+** the [database connection] that registered the preupdate hook.
+** ^The third parameter to the preupdate callback is one of the constants
+** [SQLITE_INSERT], [SQLITE_DELETE], or [SQLITE_UPDATE] to identify the
+** kind of update operation that is about to occur.
+** ^(The fourth parameter to the preupdate callback is the name of the
+** database within the database connection that is being modified. This
+** will be "main" for the main database or "temp" for TEMP tables or
+** the name given after the AS keyword in the [ATTACH] statement for attached
+** databases.)^
+** ^The fifth parameter to the preupdate callback is the name of the
+** table that is being modified.
+**
+** For an UPDATE or DELETE operation on a [rowid table], the sixth
+** parameter passed to the preupdate callback is the initial [rowid] of the
+** row being modified or deleted. For an INSERT operation on a rowid table,
+** or any operation on a WITHOUT ROWID table, the value of the sixth
+** parameter is undefined. For an INSERT or UPDATE on a rowid table the
+** seventh parameter is the final rowid value of the row being inserted
+** or updated. The value of the seventh parameter passed to the callback
+** function is not defined for operations on WITHOUT ROWID tables, or for
+** INSERT operations on rowid tables.
+**
+** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
+** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
+** provide additional information about a preupdate event. These routines
+** may only be called from within a preupdate callback. Invoking any of
+** these routines from outside of a preupdate callback or with a
+** [database connection] pointer that is different from the one supplied
+** to the preupdate callback results in undefined and probably undesirable
+** behavior.
+**
+** ^The [sqlite3_preupdate_count(D)] interface returns the number of columns
+** in the row that is being inserted, updated, or deleted.
+**
+** ^The [sqlite3_preupdate_old(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row before it is updated. The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_UPDATE and SQLITE_DELETE
+** preupdate callbacks; if it is used by an SQLITE_INSERT callback then the
+** behavior is undefined. The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_new(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row after it is updated. The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_INSERT and SQLITE_UPDATE
+** preupdate callbacks; if it is used by an SQLITE_DELETE callback then the
+** behavior is undefined. The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
+** callback was invoked as a result of a direct insert, update, or delete
+** operation; or 1 for inserts, updates, or deletes invoked by top-level
+** triggers; or 2 for changes resulting from triggers called by top-level
+** triggers; and so forth.
+**
+** See also: [sqlite3_update_hook()]
+*/
+#if defined(SQLITE_ENABLE_PREUPDATE_HOOK)
+SQLITE_API void *sqlite3_preupdate_hook(
+ sqlite3 *db,
+ void(*xPreUpdate)(
+ void *pCtx, /* Copy of third arg to preupdate_hook() */
+ sqlite3 *db, /* Database handle */
+ int op, /* SQLITE_UPDATE, DELETE or INSERT */
+ char const *zDb, /* Database name */
+ char const *zName, /* Table name */
+ sqlite3_int64 iKey1, /* Rowid of row about to be deleted/updated */
+ sqlite3_int64 iKey2 /* New rowid value (for a rowid UPDATE) */
+ ),
+ void*
+);
+SQLITE_API int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
+SQLITE_API int sqlite3_preupdate_count(sqlite3 *);
+SQLITE_API int sqlite3_preupdate_depth(sqlite3 *);
+SQLITE_API int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
+#endif
+
+/*
+** CAPI3REF: Low-level system error code
+**
+** ^Attempt to return the underlying operating system error code or error
+** number that caused the most recent I/O error or failure to open a file.
+** The return value is OS-dependent. For example, on unix systems, after
+** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
+** called to get back the underlying "errno" that caused the problem, such
+** as ENOSPC, EAUTH, EISDIR, and so forth.
+*/
+SQLITE_API int sqlite3_system_errno(sqlite3*);
+
+/*
+** CAPI3REF: Database Snapshot
+** KEYWORDS: {snapshot} {sqlite3_snapshot}
+** EXPERIMENTAL
+**
+** An instance of the snapshot object records the state of a [WAL mode]
+** database for some specific point in history.
+**
+** In [WAL mode], multiple [database connections] that are open on the
+** same database file can each be reading a different historical version
+** of the database file. When a [database connection] begins a read
+** transaction, that connection sees an unchanging copy of the database
+** as it existed for the point in time when the transaction first started.
+** Subsequent changes to the database from other connections are not seen
+** by the reader until a new read transaction is started.
+**
+** The sqlite3_snapshot object records state information about an historical
+** version of the database file so that it is possible to later open a new read
+** transaction that sees that historical version of the database rather than
+** the most recent version.
+**
+** The constructor for this object is [sqlite3_snapshot_get()]. The
+** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
+** to an historical snapshot (if possible). The destructor for
+** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
+*/
+typedef struct sqlite3_snapshot {
+ unsigned char hidden[48];
+} sqlite3_snapshot;
+
+/*
+** CAPI3REF: Record A Database Snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
+** new [sqlite3_snapshot] object that records the current state of
+** schema S in database connection D. ^On success, the
+** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
+** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
+** If there is not already a read-transaction open on schema S when
+** this function is called, one is opened automatically.
+**
+** The following must be true for this function to succeed. If any of
+** the following statements are false when sqlite3_snapshot_get() is
+** called, SQLITE_ERROR is returned. The final value of *P is undefined
+** in this case.
+**
+** <ul>
+** <li> The database handle must be in [autocommit mode].
+**
+** <li> Schema S of [database connection] D must be a [WAL mode] database.
+**
+** <li> There must not be a write transaction open on schema S of database
+** connection D.
+**
+** <li> One or more transactions must have been written to the current wal
+** file since it was created on disk (by any connection). This means
+** that a snapshot cannot be taken on a wal mode database with no wal
+** file immediately after it is first opened. At least one transaction
+** must be written to it first.
+** </ul>
+**
+** This function may also return SQLITE_NOMEM. If it is called with the
+** database handle in autocommit mode but fails for some other reason,
+** whether or not a read transaction is opened on schema S is undefined.
+**
+** The [sqlite3_snapshot] object returned from a successful call to
+** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()]
+** to avoid a memory leak.
+**
+** The [sqlite3_snapshot_get()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
+ sqlite3 *db,
+ const char *zSchema,
+ sqlite3_snapshot **ppSnapshot
+);
+
+/*
+** CAPI3REF: Start a read transaction on an historical snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
+** read transaction for schema S of
+** [database connection] D such that the read transaction
+** refers to historical [snapshot] P, rather than the most
+** recent change to the database.
+** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
+** or an appropriate [error code] if it fails.
+**
+** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
+** the first operation following the [BEGIN] that takes the schema S
+** out of [autocommit mode].
+** ^In other words, schema S must not currently be in
+** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
+** database connection D must be out of [autocommit mode].
+** ^A [snapshot] will fail to open if it has been overwritten by a
+** [checkpoint].
+** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
+** database connection D does not know that the database file for
+** schema S is in [WAL mode]. A database connection might not know
+** that the database file is in [WAL mode] if there has been no prior
+** I/O on that database connection, or if the database entered [WAL mode]
+** after the most recent I/O on the database connection.)^
+** (Hint: Run "[PRAGMA application_id]" against a newly opened
+** database connection in order to make it ready to use snapshots.)
+**
+** The [sqlite3_snapshot_open()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
+ sqlite3 *db,
+ const char *zSchema,
+ sqlite3_snapshot *pSnapshot
+);
+
+/*
+** CAPI3REF: Destroy a snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
+** The application must eventually free every [sqlite3_snapshot] object
+** using this routine to avoid a memory leak.
+**
+** The [sqlite3_snapshot_free()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
+
+/*
+** CAPI3REF: Compare the ages of two snapshot handles.
+** EXPERIMENTAL
+**
+** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
+** of two valid snapshot handles.
+**
+** If the two snapshot handles are not associated with the same database
+** file, the result of the comparison is undefined.
+**
+** Additionally, the result of the comparison is only valid if both of the
+** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
+** last time the wal file was deleted. The wal file is deleted when the
+** database is changed back to rollback mode or when the number of database
+** clients drops to zero. If either snapshot handle was obtained before the
+** wal file was last deleted, the value returned by this function
+** is undefined.
+**
+** Otherwise, this API returns a negative value if P1 refers to an older
+** snapshot than P2, zero if the two handles refer to the same database
+** snapshot, and a positive value if P1 is a newer snapshot than P2.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
+ sqlite3_snapshot *p1,
+ sqlite3_snapshot *p2
+);
+
+/*
+** CAPI3REF: Recover snapshots from a wal file
+** EXPERIMENTAL
+**
+** If all connections disconnect from a database file but do not perform
+** a checkpoint, the existing wal file is opened along with the database
+** file the next time the database is opened. At this point it is only
+** possible to successfully call sqlite3_snapshot_open() to open the most
+** recent snapshot of the database (the one at the head of the wal file),
+** even though the wal file may contain other valid snapshots for which
+** clients have sqlite3_snapshot handles.
+**
+** This function attempts to scan the wal file associated with database zDb
+** of database handle db and make all valid snapshots available to
+** sqlite3_snapshot_open(). It is an error if there is already a read
+** transaction open on the database, or if the database is not a wal mode
+** database.
+**
+** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb);
+
+/*
+** Undo the hack that converts floating point types to integer for
+** builds on processors without floating point support.
+*/
+#ifdef SQLITE_OMIT_FLOATING_POINT
+# undef double
+#endif
+
+#ifdef __cplusplus
+} /* End of the 'extern "C"' block */
+#endif
+#endif /* SQLITE3_H */
+
+/******** Begin file sqlite3rtree.h *********/
+/*
+** 2010 August 30
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+*/
+
+#ifndef _SQLITE3RTREE_H_
+#define _SQLITE3RTREE_H_
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
+typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info;
+
+/* The double-precision datatype used by RTree depends on the
+** SQLITE_RTREE_INT_ONLY compile-time option.
+*/
+#ifdef SQLITE_RTREE_INT_ONLY
+ typedef sqlite3_int64 sqlite3_rtree_dbl;
+#else
+ typedef double sqlite3_rtree_dbl;
+#endif
+
+/*
+** Register a geometry callback named zGeom that can be used as part of an
+** R-Tree geometry query as follows:
+**
+** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
+*/
+SQLITE_API int sqlite3_rtree_geometry_callback(
+ sqlite3 *db,
+ const char *zGeom,
+ int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
+ void *pContext
+);
+
+
+/*
+** A pointer to a structure of the following type is passed as the first
+** argument to callbacks registered using rtree_geometry_callback().
+*/
+struct sqlite3_rtree_geometry {
+ void *pContext; /* Copy of pContext passed to s_r_g_c() */
+ int nParam; /* Size of array aParam[] */
+ sqlite3_rtree_dbl *aParam; /* Parameters passed to SQL geom function */
+ void *pUser; /* Callback implementation user data */
+ void (*xDelUser)(void *); /* Called by SQLite to clean up pUser */
+};
+
+/*
+** Register a 2nd-generation geometry callback named zScore that can be
+** used as part of an R-Tree geometry query as follows:
+**
+** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
+*/
+SQLITE_API int sqlite3_rtree_query_callback(
+ sqlite3 *db,
+ const char *zQueryFunc,
+ int (*xQueryFunc)(sqlite3_rtree_query_info*),
+ void *pContext,
+ void (*xDestructor)(void*)
+);
+
+
+/*
+** A pointer to a structure of the following type is passed as the
+** argument to scored geometry callback registered using
+** sqlite3_rtree_query_callback().
+**
+** Note that the first 5 fields of this structure are identical to
+** sqlite3_rtree_geometry. This structure is a subclass of
+** sqlite3_rtree_geometry.
+*/
+struct sqlite3_rtree_query_info {
+ void *pContext; /* pContext from when function registered */
+ int nParam; /* Number of function parameters */
+ sqlite3_rtree_dbl *aParam; /* value of function parameters */
+ void *pUser; /* callback can use this, if desired */
+ void (*xDelUser)(void*); /* function to free pUser */
+ sqlite3_rtree_dbl *aCoord; /* Coordinates of node or entry to check */
+ unsigned int *anQueue; /* Number of pending entries in the queue */
+ int nCoord; /* Number of coordinates */
+ int iLevel; /* Level of current node or entry */
+ int mxLevel; /* The largest iLevel value in the tree */
+ sqlite3_int64 iRowid; /* Rowid for current entry */
+ sqlite3_rtree_dbl rParentScore; /* Score of parent node */
+ int eParentWithin; /* Visibility of parent node */
+ int eWithin; /* OUT: Visiblity */
+ sqlite3_rtree_dbl rScore; /* OUT: Write the score here */
+ /* The following fields are only available in 3.8.11 and later */
+ sqlite3_value **apSqlParam; /* Original SQL values of parameters */
+};
+
+/*
+** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin.
+*/
+#define NOT_WITHIN 0 /* Object completely outside of query region */
+#define PARTLY_WITHIN 1 /* Object partially overlaps query region */
+#define FULLY_WITHIN 2 /* Object fully contained within query region */
+
+
+#ifdef __cplusplus
+} /* end of the 'extern "C"' block */
+#endif
+
+#endif /* ifndef _SQLITE3RTREE_H_ */
+
+/******** End of sqlite3rtree.h *********/
+/******** Begin file sqlite3session.h *********/
+
+#if !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION)
+#define __SQLITESESSION_H_ 1
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+** CAPI3REF: Session Object Handle
+*/
+typedef struct sqlite3_session sqlite3_session;
+
+/*
+** CAPI3REF: Changeset Iterator Handle
+*/
+typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
+
+/*
+** CAPI3REF: Create A New Session Object
+**
+** Create a new session object attached to database handle db. If successful,
+** a pointer to the new object is written to *ppSession and SQLITE_OK is
+** returned. If an error occurs, *ppSession is set to NULL and an SQLite
+** error code (e.g. SQLITE_NOMEM) is returned.
+**
+** It is possible to create multiple session objects attached to a single
+** database handle.
+**
+** Session objects created using this function should be deleted using the
+** [sqlite3session_delete()] function before the database handle that they
+** are attached to is itself closed. If the database handle is closed before
+** the session object is deleted, then the results of calling any session
+** module function, including [sqlite3session_delete()] on the session object
+** are undefined.
+**
+** Because the session module uses the [sqlite3_preupdate_hook()] API, it
+** is not possible for an application to register a pre-update hook on a
+** database handle that has one or more session objects attached. Nor is
+** it possible to create a session object attached to a database handle for
+** which a pre-update hook is already defined. The results of attempting
+** either of these things are undefined.
+**
+** The session object will be used to create changesets for tables in
+** database zDb, where zDb is either "main", or "temp", or the name of an
+** attached database. It is not an error if database zDb is not attached
+** to the database when the session object is created.
+*/
+SQLITE_API int sqlite3session_create(
+ sqlite3 *db, /* Database handle */
+ const char *zDb, /* Name of db (e.g. "main") */
+ sqlite3_session **ppSession /* OUT: New session object */
+);
+
+/*
+** CAPI3REF: Delete A Session Object
+**
+** Delete a session object previously allocated using
+** [sqlite3session_create()]. Once a session object has been deleted, the
+** results of attempting to use pSession with any other session module
+** function are undefined.
+**
+** Session objects must be deleted before the database handle to which they
+** are attached is closed. Refer to the documentation for
+** [sqlite3session_create()] for details.
+*/
+SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
+
+
+/*
+** CAPI3REF: Enable Or Disable A Session Object
+**
+** Enable or disable the recording of changes by a session object. When
+** enabled, a session object records changes made to the database. When
+** disabled - it does not. A newly created session object is enabled.
+** Refer to the documentation for [sqlite3session_changeset()] for further
+** details regarding how enabling and disabling a session object affects
+** the eventual changesets.
+**
+** Passing zero to this function disables the session. Passing a value
+** greater than zero enables it. Passing a value less than zero is a
+** no-op, and may be used to query the current state of the session.
+**
+** The return value indicates the final state of the session object: 0 if
+** the session is disabled, or 1 if it is enabled.
+*/
+SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
+
+/*
+** CAPI3REF: Set Or Clear the Indirect Change Flag
+**
+** Each change recorded by a session object is marked as either direct or
+** indirect. A change is marked as indirect if either:
+**
+** <ul>
+** <li> The session object "indirect" flag is set when the change is
+** made, or
+** <li> The change is made by an SQL trigger or foreign key action
+** instead of directly as a result of a users SQL statement.
+** </ul>
+**
+** If a single row is affected by more than one operation within a session,
+** then the change is considered indirect if all operations meet the criteria
+** for an indirect change above, or direct otherwise.
+**
+** This function is used to set, clear or query the session object indirect
+** flag. If the second argument passed to this function is zero, then the
+** indirect flag is cleared. If it is greater than zero, the indirect flag
+** is set. Passing a value less than zero does not modify the current value
+** of the indirect flag, and may be used to query the current state of the
+** indirect flag for the specified session object.
+**
+** The return value indicates the final state of the indirect flag: 0 if
+** it is clear, or 1 if it is set.
+*/
+SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);
+
+/*
+** CAPI3REF: Attach A Table To A Session Object
+**
+** If argument zTab is not NULL, then it is the name of a table to attach
+** to the session object passed as the first argument. All subsequent changes
+** made to the table while the session object is enabled will be recorded. See
+** documentation for [sqlite3session_changeset()] for further details.
+**
+** Or, if argument zTab is NULL, then changes are recorded for all tables
+** in the database. If additional tables are added to the database (by
+** executing "CREATE TABLE" statements) after this call is made, changes for
+** the new tables are also recorded.
+**
+** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
+** defined as part of their CREATE TABLE statement. It does not matter if the
+** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
+** KEY may consist of a single column, or may be a composite key.
+**
+** It is not an error if the named table does not exist in the database. Nor
+** is it an error if the named table does not have a PRIMARY KEY. However,
+** no changes will be recorded in either of these scenarios.
+**
+** Changes are not recorded for individual rows that have NULL values stored
+** in one or more of their PRIMARY KEY columns.
+**
+** SQLITE_OK is returned if the call completes without error. Or, if an error
+** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
+*/
+SQLITE_API int sqlite3session_attach(
+ sqlite3_session *pSession, /* Session object */
+ const char *zTab /* Table name */
+);
+
+/*
+** CAPI3REF: Set a table filter on a Session Object.
+**
+** The second argument (xFilter) is the "filter callback". For changes to rows
+** in tables that are not attached to the Session object, the filter is called
+** to determine whether changes to the table's rows should be tracked or not.
+** If xFilter returns 0, changes is not tracked. Note that once a table is
+** attached, xFilter will not be called again.
+*/
+SQLITE_API void sqlite3session_table_filter(
+ sqlite3_session *pSession, /* Session object */
+ int(*xFilter)(
+ void *pCtx, /* Copy of third arg to _filter_table() */
+ const char *zTab /* Table name */
+ ),
+ void *pCtx /* First argument passed to xFilter */
+);
+
+/*
+** CAPI3REF: Generate A Changeset From A Session Object
+**
+** Obtain a changeset containing changes to the tables attached to the
+** session object passed as the first argument. If successful,
+** set *ppChangeset to point to a buffer containing the changeset
+** and *pnChangeset to the size of the changeset in bytes before returning
+** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to
+** zero and return an SQLite error code.
+**
+** A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes,
+** each representing a change to a single row of an attached table. An INSERT
+** change contains the values of each field of a new database row. A DELETE
+** contains the original values of each field of a deleted database row. An
+** UPDATE change contains the original values of each field of an updated
+** database row along with the updated values for each updated non-primary-key
+** column. It is not possible for an UPDATE change to represent a change that
+** modifies the values of primary key columns. If such a change is made, it
+** is represented in a changeset as a DELETE followed by an INSERT.
+**
+** Changes are not recorded for rows that have NULL values stored in one or
+** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
+** no corresponding change is present in the changesets returned by this
+** function. If an existing row with one or more NULL values stored in
+** PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL,
+** only an INSERT is appears in the changeset. Similarly, if an existing row
+** with non-NULL PRIMARY KEY values is updated so that one or more of its
+** PRIMARY KEY columns are set to NULL, the resulting changeset contains a
+** DELETE change only.
+**
+** The contents of a changeset may be traversed using an iterator created
+** using the [sqlite3changeset_start()] API. A changeset may be applied to
+** a database with a compatible schema using the [sqlite3changeset_apply()]
+** API.
+**
+** Within a changeset generated by this function, all changes related to a
+** single table are grouped together. In other words, when iterating through
+** a changeset or when applying a changeset to a database, all changes related
+** to a single table are processed before moving on to the next table. Tables
+** are sorted in the same order in which they were attached (or auto-attached)
+** to the sqlite3_session object. The order in which the changes related to
+** a single table are stored is undefined.
+**
+** Following a successful call to this function, it is the responsibility of
+** the caller to eventually free the buffer that *ppChangeset points to using
+** [sqlite3_free()].
+**
+** <h3>Changeset Generation</h3>
+**
+** Once a table has been attached to a session object, the session object
+** records the primary key values of all new rows inserted into the table.
+** It also records the original primary key and other column values of any
+** deleted or updated rows. For each unique primary key value, data is only
+** recorded once - the first time a row with said primary key is inserted,
+** updated or deleted in the lifetime of the session.
+**
+** There is one exception to the previous paragraph: when a row is inserted,
+** updated or deleted, if one or more of its primary key columns contain a
+** NULL value, no record of the change is made.
+**
+** The session object therefore accumulates two types of records - those
+** that consist of primary key values only (created when the user inserts
+** a new record) and those that consist of the primary key values and the
+** original values of other table columns (created when the users deletes
+** or updates a record).
+**
+** When this function is called, the requested changeset is created using
+** both the accumulated records and the current contents of the database
+** file. Specifically:
+**
+** <ul>
+** <li> For each record generated by an insert, the database is queried
+** for a row with a matching primary key. If one is found, an INSERT
+** change is added to the changeset. If no such row is found, no change
+** is added to the changeset.
+**
+** <li> For each record generated by an update or delete, the database is
+** queried for a row with a matching primary key. If such a row is
+** found and one or more of the non-primary key fields have been
+** modified from their original values, an UPDATE change is added to
+** the changeset. Or, if no such row is found in the table, a DELETE
+** change is added to the changeset. If there is a row with a matching
+** primary key in the database, but all fields contain their original
+** values, no change is added to the changeset.
+** </ul>
+**
+** This means, amongst other things, that if a row is inserted and then later
+** deleted while a session object is active, neither the insert nor the delete
+** will be present in the changeset. Or if a row is deleted and then later a
+** row with the same primary key values inserted while a session object is
+** active, the resulting changeset will contain an UPDATE change instead of
+** a DELETE and an INSERT.
+**
+** When a session object is disabled (see the [sqlite3session_enable()] API),
+** it does not accumulate records when rows are inserted, updated or deleted.
+** This may appear to have some counter-intuitive effects if a single row
+** is written to more than once during a session. For example, if a row
+** is inserted while a session object is enabled, then later deleted while
+** the same session object is disabled, no INSERT record will appear in the
+** changeset, even though the delete took place while the session was disabled.
+** Or, if one field of a row is updated while a session is disabled, and
+** another field of the same row is updated while the session is enabled, the
+** resulting changeset will contain an UPDATE change that updates both fields.
+*/
+SQLITE_API int sqlite3session_changeset(
+ sqlite3_session *pSession, /* Session object */
+ int *pnChangeset, /* OUT: Size of buffer at *ppChangeset */
+ void **ppChangeset /* OUT: Buffer containing changeset */
+);
+
+/*
+** CAPI3REF: Load The Difference Between Tables Into A Session
+**
+** If it is not already attached to the session object passed as the first
+** argument, this function attaches table zTbl in the same manner as the
+** [sqlite3session_attach()] function. If zTbl does not exist, or if it
+** does not have a primary key, this function is a no-op (but does not return
+** an error).
+**
+** Argument zFromDb must be the name of a database ("main", "temp" etc.)
+** attached to the same database handle as the session object that contains
+** a table compatible with the table attached to the session by this function.
+** A table is considered compatible if it:
+**
+** <ul>
+** <li> Has the same name,
+** <li> Has the same set of columns declared in the same order, and
+** <li> Has the same PRIMARY KEY definition.
+** </ul>
+**
+** If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables
+** are compatible but do not have any PRIMARY KEY columns, it is not an error
+** but no changes are added to the session object. As with other session
+** APIs, tables without PRIMARY KEYs are simply ignored.
+**
+** This function adds a set of changes to the session object that could be
+** used to update the table in database zFrom (call this the "from-table")
+** so that its content is the same as the table attached to the session
+** object (call this the "to-table"). Specifically:
+**
+** <ul>
+** <li> For each row (primary key) that exists in the to-table but not in
+** the from-table, an INSERT record is added to the session object.
+**
+** <li> For each row (primary key) that exists in the to-table but not in
+** the from-table, a DELETE record is added to the session object.
+**
+** <li> For each row (primary key) that exists in both tables, but features
+** different non-PK values in each, an UPDATE record is added to the
+** session.
+** </ul>
+**
+** To clarify, if this function is called and then a changeset constructed
+** using [sqlite3session_changeset()], then after applying that changeset to
+** database zFrom the contents of the two compatible tables would be
+** identical.
+**
+** It an error if database zFrom does not exist or does not contain the
+** required compatible table.
+**
+** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
+** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
+** may be set to point to a buffer containing an English language error
+** message. It is the responsibility of the caller to free this buffer using
+** sqlite3_free().
+*/
+SQLITE_API int sqlite3session_diff(
+ sqlite3_session *pSession,
+ const char *zFromDb,
+ const char *zTbl,
+ char **pzErrMsg
+);
+
+
+/*
+** CAPI3REF: Generate A Patchset From A Session Object
+**
+** The differences between a patchset and a changeset are that:
+**
+** <ul>
+** <li> DELETE records consist of the primary key fields only. The
+** original values of other fields are omitted.
+** <li> The original values of any modified fields are omitted from
+** UPDATE records.
+** </ul>
+**
+** A patchset blob may be used with up to date versions of all
+** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
+** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
+** attempting to use a patchset blob with old versions of the
+** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
+**
+** Because the non-primary key "old.*" fields are omitted, no
+** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
+** is passed to the sqlite3changeset_apply() API. Other conflict types work
+** in the same way as for changesets.
+**
+** Changes within a patchset are ordered in the same way as for changesets
+** generated by the sqlite3session_changeset() function (i.e. all changes for
+** a single table are grouped together, tables appear in the order in which
+** they were attached to the session object).
+*/
+SQLITE_API int sqlite3session_patchset(
+ sqlite3_session *pSession, /* Session object */
+ int *pnPatchset, /* OUT: Size of buffer at *ppPatchset */
+ void **ppPatchset /* OUT: Buffer containing patchset */
+);
+
+/*
+** CAPI3REF: Test if a changeset has recorded any changes.
+**
+** Return non-zero if no changes to attached tables have been recorded by
+** the session object passed as the first argument. Otherwise, if one or
+** more changes have been recorded, return zero.
+**
+** Even if this function returns zero, it is possible that calling
+** [sqlite3session_changeset()] on the session handle may still return a
+** changeset that contains no changes. This can happen when a row in
+** an attached table is modified and then later on the original values
+** are restored. However, if this function returns non-zero, then it is
+** guaranteed that a call to sqlite3session_changeset() will return a
+** changeset containing zero changes.
+*/
+SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession);
+
+/*
+** CAPI3REF: Create An Iterator To Traverse A Changeset
+**
+** Create an iterator used to iterate through the contents of a changeset.
+** If successful, *pp is set to point to the iterator handle and SQLITE_OK
+** is returned. Otherwise, if an error occurs, *pp is set to zero and an
+** SQLite error code is returned.
+**
+** The following functions can be used to advance and query a changeset
+** iterator created by this function:
+**
+** <ul>
+** <li> [sqlite3changeset_next()]
+** <li> [sqlite3changeset_op()]
+** <li> [sqlite3changeset_new()]
+** <li> [sqlite3changeset_old()]
+** </ul>
+**
+** It is the responsibility of the caller to eventually destroy the iterator
+** by passing it to [sqlite3changeset_finalize()]. The buffer containing the
+** changeset (pChangeset) must remain valid until after the iterator is
+** destroyed.
+**
+** Assuming the changeset blob was created by one of the
+** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
+** [sqlite3changeset_invert()] functions, all changes within the changeset
+** that apply to a single table are grouped together. This means that when
+** an application iterates through a changeset using an iterator created by
+** this function, all changes that relate to a single table are visited
+** consecutively. There is no chance that the iterator will visit a change
+** the applies to table X, then one for table Y, and then later on visit
+** another change for table X.
+*/
+SQLITE_API int sqlite3changeset_start(
+ sqlite3_changeset_iter **pp, /* OUT: New changeset iterator handle */
+ int nChangeset, /* Size of changeset blob in bytes */
+ void *pChangeset /* Pointer to blob containing changeset */
+);
+
+
+/*
+** CAPI3REF: Advance A Changeset Iterator
+**
+** This function may only be used with iterators created by function
+** [sqlite3changeset_start()]. If it is called on an iterator passed to
+** a conflict-handler callback by [sqlite3changeset_apply()], SQLITE_MISUSE
+** is returned and the call has no effect.
+**
+** Immediately after an iterator is created by sqlite3changeset_start(), it
+** does not point to any change in the changeset. Assuming the changeset
+** is not empty, the first call to this function advances the iterator to
+** point to the first change in the changeset. Each subsequent call advances
+** the iterator to point to the next change in the changeset (if any). If
+** no error occurs and the iterator points to a valid change after a call
+** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
+** Otherwise, if all changes in the changeset have already been visited,
+** SQLITE_DONE is returned.
+**
+** If an error occurs, an SQLite error code is returned. Possible error
+** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
+** SQLITE_NOMEM.
+*/
+SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned [SQLITE_ROW]. If this
+** is not the case, this function returns [SQLITE_MISUSE].
+**
+** If argument pzTab is not NULL, then *pzTab is set to point to a
+** nul-terminated utf-8 encoded string containing the name of the table
+** affected by the current change. The buffer remains valid until either
+** sqlite3changeset_next() is called on the iterator or until the
+** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
+** set to the number of columns in the table affected by the change. If
+** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
+** is an indirect change, or false (0) otherwise. See the documentation for
+** [sqlite3session_indirect()] for a description of direct and indirect
+** changes. Finally, if pOp is not NULL, then *pOp is set to one of
+** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
+** type of change that the iterator currently points to.
+**
+** If no error occurs, SQLITE_OK is returned. If an error does occur, an
+** SQLite error code is returned. The values of the output variables may not
+** be trusted in this case.
+*/
+SQLITE_API int sqlite3changeset_op(
+ sqlite3_changeset_iter *pIter, /* Iterator object */
+ const char **pzTab, /* OUT: Pointer to table name */
+ int *pnCol, /* OUT: Number of columns in table */
+ int *pOp, /* OUT: SQLITE_INSERT, DELETE or UPDATE */
+ int *pbIndirect /* OUT: True for an 'indirect' change */
+);
+
+/*
+** CAPI3REF: Obtain The Primary Key Definition Of A Table
+**
+** For each modified table, a changeset includes the following:
+**
+** <ul>
+** <li> The number of columns in the table, and
+** <li> Which of those columns make up the tables PRIMARY KEY.
+** </ul>
+**
+** This function is used to find which columns comprise the PRIMARY KEY of
+** the table modified by the change that iterator pIter currently points to.
+** If successful, *pabPK is set to point to an array of nCol entries, where
+** nCol is the number of columns in the table. Elements of *pabPK are set to
+** 0x01 if the corresponding column is part of the tables primary key, or
+** 0x00 if it is not.
+**
+** If argument pnCol is not NULL, then *pnCol is set to the number of columns
+** in the table.
+**
+** If this function is called when the iterator does not point to a valid
+** entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise,
+** SQLITE_OK is returned and the output variables populated as described
+** above.
+*/
+SQLITE_API int sqlite3changeset_pk(
+ sqlite3_changeset_iter *pIter, /* Iterator object */
+ unsigned char **pabPK, /* OUT: Array of boolean - true for PK cols */
+ int *pnCol /* OUT: Number of entries in output array */
+);
+
+/*
+** CAPI3REF: Obtain old.* Values From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of
+** original row values stored as part of the UPDATE or DELETE change and
+** returns SQLITE_OK. The name of the function comes from the fact that this
+** is similar to the "old.*" columns available to update or delete triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_old(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: Old value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain new.* Values From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of
+** new row values stored as part of the UPDATE or INSERT change and
+** returns SQLITE_OK. If the change is an UPDATE and does not include
+** a new value for the requested column, *ppValue is set to NULL and
+** SQLITE_OK returned. The name of the function comes from the fact that
+** this is similar to the "new.*" columns available to update or delete
+** triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_new(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: New value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
+**
+** This function should only be used with iterator objects passed to a
+** conflict-handler callback by [sqlite3changeset_apply()] with either
+** [SQLITE_CHANGESET_DATA] or [SQLITE_CHANGESET_CONFLICT]. If this function
+** is called on any other iterator, [SQLITE_MISUSE] is returned and *ppValue
+** is set to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the
+** "conflicting row" associated with the current conflict-handler callback
+** and returns SQLITE_OK.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_conflict(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int iVal, /* Column number */
+ sqlite3_value **ppValue /* OUT: Value from conflicting row */
+);
+
+/*
+** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
+**
+** This function may only be called with an iterator passed to an
+** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
+** it sets the output variable to the total number of known foreign key
+** violations in the destination database and returns SQLITE_OK.
+**
+** In all other cases this function returns SQLITE_MISUSE.
+*/
+SQLITE_API int sqlite3changeset_fk_conflicts(
+ sqlite3_changeset_iter *pIter, /* Changeset iterator */
+ int *pnOut /* OUT: Number of FK violations */
+);
+
+
+/*
+** CAPI3REF: Finalize A Changeset Iterator
+**
+** This function is used to finalize an iterator allocated with
+** [sqlite3changeset_start()].
+**
+** This function should only be called on iterators created using the
+** [sqlite3changeset_start()] function. If an application calls this
+** function with an iterator passed to a conflict-handler by
+** [sqlite3changeset_apply()], [SQLITE_MISUSE] is immediately returned and the
+** call has no effect.
+**
+** If an error was encountered within a call to an sqlite3changeset_xxx()
+** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
+** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
+** to that error is returned by this function. Otherwise, SQLITE_OK is
+** returned. This is to allow the following pattern (pseudo-code):
+**
+** sqlite3changeset_start();
+** while( SQLITE_ROW==sqlite3changeset_next() ){
+** // Do something with change.
+** }
+** rc = sqlite3changeset_finalize();
+** if( rc!=SQLITE_OK ){
+** // An error has occurred
+** }
+*/
+SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Invert A Changeset
+**
+** This function is used to "invert" a changeset object. Applying an inverted
+** changeset to a database reverses the effects of applying the uninverted
+** changeset. Specifically:
+**
+** <ul>
+** <li> Each DELETE change is changed to an INSERT, and
+** <li> Each INSERT change is changed to a DELETE, and
+** <li> For each UPDATE change, the old.* and new.* values are exchanged.
+** </ul>
+**
+** This function does not change the order in which changes appear within
+** the changeset. It merely reverses the sense of each individual change.
+**
+** If successful, a pointer to a buffer containing the inverted changeset
+** is stored in *ppOut, the size of the same buffer is stored in *pnOut, and
+** SQLITE_OK is returned. If an error occurs, both *pnOut and *ppOut are
+** zeroed and an SQLite error code returned.
+**
+** It is the responsibility of the caller to eventually call sqlite3_free()
+** on the *ppOut pointer to free the buffer allocation following a successful
+** call to this function.
+**
+** WARNING/TODO: This function currently assumes that the input is a valid
+** changeset. If it is not, the results are undefined.
+*/
+SQLITE_API int sqlite3changeset_invert(
+ int nIn, const void *pIn, /* Input changeset */
+ int *pnOut, void **ppOut /* OUT: Inverse of input */
+);
+
+/*
+** CAPI3REF: Concatenate Two Changeset Objects
+**
+** This function is used to concatenate two changesets, A and B, into a
+** single changeset. The result is a changeset equivalent to applying
+** changeset A followed by changeset B.
+**
+** This function combines the two input changesets using an
+** sqlite3_changegroup object. Calling it produces similar results as the
+** following code fragment:
+**
+** sqlite3_changegroup *pGrp;
+** rc = sqlite3_changegroup_new(&pGrp);
+** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
+** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB);
+** if( rc==SQLITE_OK ){
+** rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
+** }else{
+** *ppOut = 0;
+** *pnOut = 0;
+** }
+**
+** Refer to the sqlite3_changegroup documentation below for details.
+*/
+SQLITE_API int sqlite3changeset_concat(
+ int nA, /* Number of bytes in buffer pA */
+ void *pA, /* Pointer to buffer containing changeset A */
+ int nB, /* Number of bytes in buffer pB */
+ void *pB, /* Pointer to buffer containing changeset B */
+ int *pnOut, /* OUT: Number of bytes in output changeset */
+ void **ppOut /* OUT: Buffer containing output changeset */
+);
+
+
+/*
+** CAPI3REF: Changegroup Handle
+*/
+typedef struct sqlite3_changegroup sqlite3_changegroup;
+
+/*
+** CAPI3REF: Create A New Changegroup Object
+**
+** An sqlite3_changegroup object is used to combine two or more changesets
+** (or patchsets) into a single changeset (or patchset). A single changegroup
+** object may combine changesets or patchsets, but not both. The output is
+** always in the same format as the input.
+**
+** If successful, this function returns SQLITE_OK and populates (*pp) with
+** a pointer to a new sqlite3_changegroup object before returning. The caller
+** should eventually free the returned object using a call to
+** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
+** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
+**
+** The usual usage pattern for an sqlite3_changegroup object is as follows:
+**
+** <ul>
+** <li> It is created using a call to sqlite3changegroup_new().
+**
+** <li> Zero or more changesets (or patchsets) are added to the object
+** by calling sqlite3changegroup_add().
+**
+** <li> The result of combining all input changesets together is obtained
+** by the application via a call to sqlite3changegroup_output().
+**
+** <li> The object is deleted using a call to sqlite3changegroup_delete().
+** </ul>
+**
+** Any number of calls to add() and output() may be made between the calls to
+** new() and delete(), and in any order.
+**
+** As well as the regular sqlite3changegroup_add() and
+** sqlite3changegroup_output() functions, also available are the streaming
+** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
+*/
+SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp);
+
+/*
+** CAPI3REF: Add A Changeset To A Changegroup
+**
+** Add all changes within the changeset (or patchset) in buffer pData (size
+** nData bytes) to the changegroup.
+**
+** If the buffer contains a patchset, then all prior calls to this function
+** on the same changegroup object must also have specified patchsets. Or, if
+** the buffer contains a changeset, so must have the earlier calls to this
+** function. Otherwise, SQLITE_ERROR is returned and no changes are added
+** to the changegroup.
+**
+** Rows within the changeset and changegroup are identified by the values in
+** their PRIMARY KEY columns. A change in the changeset is considered to
+** apply to the same row as a change already present in the changegroup if
+** the two rows have the same primary key.
+**
+** Changes to rows that do not already appear in the changegroup are
+** simply copied into it. Or, if both the new changeset and the changegroup
+** contain changes that apply to a single row, the final contents of the
+** changegroup depends on the type of each change, as follows:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+** <tr><th style="white-space:pre">Existing Change </th>
+** <th style="white-space:pre">New Change </th>
+** <th>Output Change
+** <tr><td>INSERT <td>INSERT <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>INSERT <td>UPDATE <td>
+** The INSERT change remains in the changegroup. The values in the
+** INSERT change are modified as if the row was inserted by the
+** existing change and then updated according to the new change.
+** <tr><td>INSERT <td>DELETE <td>
+** The existing INSERT is removed from the changegroup. The DELETE is
+** not added.
+** <tr><td>UPDATE <td>INSERT <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>UPDATE <td>UPDATE <td>
+** The existing UPDATE remains within the changegroup. It is amended
+** so that the accompanying values are as if the row was updated once
+** by the existing change and then again by the new change.
+** <tr><td>UPDATE <td>DELETE <td>
+** The existing UPDATE is replaced by the new DELETE within the
+** changegroup.
+** <tr><td>DELETE <td>INSERT <td>
+** If one or more of the column values in the row inserted by the
+** new change differ from those in the row deleted by the existing
+** change, the existing DELETE is replaced by an UPDATE within the
+** changegroup. Otherwise, if the inserted row is exactly the same
+** as the deleted row, the existing DELETE is simply discarded.
+** <tr><td>DELETE <td>UPDATE <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** <tr><td>DELETE <td>DELETE <td>
+** The new change is ignored. This case does not occur if the new
+** changeset was recorded immediately after the changesets already
+** added to the changegroup.
+** </table>
+**
+** If the new changeset contains changes to a table that is already present
+** in the changegroup, then the number of columns and the position of the
+** primary key columns for the table must be consistent. If this is not the
+** case, this function fails with SQLITE_SCHEMA. If the input changeset
+** appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is
+** returned. Or, if an out-of-memory condition occurs during processing, this
+** function returns SQLITE_NOMEM. In all cases, if an error occurs the
+** final contents of the changegroup is undefined.
+**
+** If no error occurs, SQLITE_OK is returned.
+*/
+SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);
+
+/*
+** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+**
+** Obtain a buffer containing a changeset (or patchset) representing the
+** current contents of the changegroup. If the inputs to the changegroup
+** were themselves changesets, the output is a changeset. Or, if the
+** inputs were patchsets, the output is also a patchset.
+**
+** As with the output of the sqlite3session_changeset() and
+** sqlite3session_patchset() functions, all changes related to a single
+** table are grouped together in the output of this function. Tables appear
+** in the same order as for the very first changeset added to the changegroup.
+** If the second or subsequent changesets added to the changegroup contain
+** changes for tables that do not appear in the first changeset, they are
+** appended onto the end of the output changeset, again in the order in
+** which they are first encountered.
+**
+** If an error occurs, an SQLite error code is returned and the output
+** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK
+** is returned and the output variables are set to the size of and a
+** pointer to the output buffer, respectively. In this case it is the
+** responsibility of the caller to eventually free the buffer using a
+** call to sqlite3_free().
+*/
+SQLITE_API int sqlite3changegroup_output(
+ sqlite3_changegroup*,
+ int *pnData, /* OUT: Size of output buffer in bytes */
+ void **ppData /* OUT: Pointer to output buffer */
+);
+
+/*
+** CAPI3REF: Delete A Changegroup Object
+*/
+SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
+
+/*
+** CAPI3REF: Apply A Changeset To A Database
+**
+** Apply a changeset to a database. This function attempts to update the
+** "main" database attached to handle db with the changes found in the
+** changeset passed via the second and third arguments.
+**
+** The fourth argument (xFilter) passed to this function is the "filter
+** callback". If it is not NULL, then for each table affected by at least one
+** change in the changeset, the filter callback is invoked with
+** the table name as the second argument, and a copy of the context pointer
+** passed as the sixth argument to this function as the first. If the "filter
+** callback" returns zero, then no attempt is made to apply any changes to
+** the table. Otherwise, if the return value is non-zero or the xFilter
+** argument to this function is NULL, all changes related to the table are
+** attempted.
+**
+** For each table that is not excluded by the filter callback, this function
+** tests that the target database contains a compatible table. A table is
+** considered compatible if all of the following are true:
+**
+** <ul>
+** <li> The table has the same name as the name recorded in the
+** changeset, and
+** <li> The table has at least as many columns as recorded in the
+** changeset, and
+** <li> The table has primary key columns in the same position as
+** recorded in the changeset.
+** </ul>
+**
+** If there is no compatible table, it is not an error, but none of the
+** changes associated with the table are applied. A warning message is issued
+** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
+** one such warning is issued for each table in the changeset.
+**
+** For each change for which there is a compatible table, an attempt is made
+** to modify the table contents according to the UPDATE, INSERT or DELETE
+** change. If a change cannot be applied cleanly, the conflict handler
+** function passed as the fifth argument to sqlite3changeset_apply() may be
+** invoked. A description of exactly when the conflict handler is invoked for
+** each type of change is below.
+**
+** Unlike the xFilter argument, xConflict may not be passed NULL. The results
+** of passing anything other than a valid function pointer as the xConflict
+** argument are undefined.
+**
+** Each time the conflict handler function is invoked, it must return one
+** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
+** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
+** if the second argument passed to the conflict handler is either
+** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
+** returns an illegal value, any changes already made are rolled back and
+** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
+** actions are taken by sqlite3changeset_apply() depending on the value
+** returned by each invocation of the conflict-handler function. Refer to
+** the documentation for the three
+** [SQLITE_CHANGESET_OMIT|available return values] for details.
+**
+** <dl>
+** <dt>DELETE Changes<dd>
+** For each DELETE change, this function checks if the target database
+** contains a row with the same primary key value (or values) as the
+** original row values stored in the changeset. If it does, and the values
+** stored in all non-primary key columns also match the values stored in
+** the changeset the row is deleted from the target database.
+**
+** If a row with matching primary key values is found, but one or more of
+** the non-primary key fields contains a value different from the original
+** row value stored in the changeset, the conflict-handler function is
+** invoked with [SQLITE_CHANGESET_DATA] as the second argument. If the
+** database table has more columns than are recorded in the changeset,
+** only the values of those non-primary key fields are compared against
+** the current database contents - any trailing database table columns
+** are ignored.
+**
+** If no row with matching primary key values is found in the database,
+** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+** passed as the second argument.
+**
+** If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT
+** (which can only happen if a foreign key constraint is violated), the
+** conflict-handler function is invoked with [SQLITE_CHANGESET_CONSTRAINT]
+** passed as the second argument. This includes the case where the DELETE
+** operation is attempted because an earlier call to the conflict handler
+** function returned [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>INSERT Changes<dd>
+** For each INSERT change, an attempt is made to insert the new row into
+** the database. If the changeset row contains fewer fields than the
+** database table, the trailing fields are populated with their default
+** values.
+**
+** If the attempt to insert the row fails because the database already
+** contains a row with the same primary key values, the conflict handler
+** function is invoked with the second argument set to
+** [SQLITE_CHANGESET_CONFLICT].
+**
+** If the attempt to insert the row fails because of some other constraint
+** violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
+** invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
+** This includes the case where the INSERT operation is re-attempted because
+** an earlier call to the conflict handler function returned
+** [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>UPDATE Changes<dd>
+** For each UPDATE change, this function checks if the target database
+** contains a row with the same primary key value (or values) as the
+** original row values stored in the changeset. If it does, and the values
+** stored in all modified non-primary key columns also match the values
+** stored in the changeset the row is updated within the target database.
+**
+** If a row with matching primary key values is found, but one or more of
+** the modified non-primary key fields contains a value different from an
+** original row value stored in the changeset, the conflict-handler function
+** is invoked with [SQLITE_CHANGESET_DATA] as the second argument. Since
+** UPDATE changes only contain values for non-primary key fields that are
+** to be modified, only those fields need to match the original values to
+** avoid the SQLITE_CHANGESET_DATA conflict-handler callback.
+**
+** If no row with matching primary key values is found in the database,
+** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+** passed as the second argument.
+**
+** If the UPDATE operation is attempted, but SQLite returns
+** SQLITE_CONSTRAINT, the conflict-handler function is invoked with
+** [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
+** This includes the case where the UPDATE operation is attempted after
+** an earlier call to the conflict handler function returned
+** [SQLITE_CHANGESET_REPLACE].
+** </dl>
+**
+** It is safe to execute SQL statements, including those that write to the
+** table that the callback related to, from within the xConflict callback.
+** This can be used to further customize the applications conflict
+** resolution strategy.
+**
+** All changes made by this function are enclosed in a savepoint transaction.
+** If any other error (aside from a constraint failure when attempting to
+** write to the target database) occurs, then the savepoint transaction is
+** rolled back, restoring the target database to its original state, and an
+** SQLite error code returned.
+*/
+SQLITE_API int sqlite3changeset_apply(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int nChangeset, /* Size of changeset in bytes */
+ void *pChangeset, /* Changeset blob */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx /* First argument passed to xConflict */
+);
+
+/*
+** CAPI3REF: Constants Passed To The Conflict Handler
+**
+** Values that may be passed as the second argument to a conflict-handler.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_DATA<dd>
+** The conflict handler is invoked with CHANGESET_DATA as the second argument
+** when processing a DELETE or UPDATE change if a row with the required
+** PRIMARY KEY fields is present in the database, but one or more other
+** (non primary-key) fields modified by the update do not contain the
+** expected "before" values.
+**
+** The conflicting row, in this case, is the database row with the matching
+** primary key.
+**
+** <dt>SQLITE_CHANGESET_NOTFOUND<dd>
+** The conflict handler is invoked with CHANGESET_NOTFOUND as the second
+** argument when processing a DELETE or UPDATE change if a row with the
+** required PRIMARY KEY fields is not present in the database.
+**
+** There is no conflicting row in this case. The results of invoking the
+** sqlite3changeset_conflict() API are undefined.
+**
+** <dt>SQLITE_CHANGESET_CONFLICT<dd>
+** CHANGESET_CONFLICT is passed as the second argument to the conflict
+** handler while processing an INSERT change if the operation would result
+** in duplicate primary key values.
+**
+** The conflicting row in this case is the database row with the matching
+** primary key.
+**
+** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd>
+** If foreign key handling is enabled, and applying a changeset leaves the
+** database in a state containing foreign key violations, the conflict
+** handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
+** exactly once before the changeset is committed. If the conflict handler
+** returns CHANGESET_OMIT, the changes, including those that caused the
+** foreign key constraint violation, are committed. Or, if it returns
+** CHANGESET_ABORT, the changeset is rolled back.
+**
+** No current or conflicting row information is provided. The only function
+** it is possible to call on the supplied sqlite3_changeset_iter handle
+** is sqlite3changeset_fk_conflicts().
+**
+** <dt>SQLITE_CHANGESET_CONSTRAINT<dd>
+** If any other constraint violation occurs while applying a change (i.e.
+** a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
+** invoked with CHANGESET_CONSTRAINT as the second argument.
+**
+** There is no conflicting row in this case. The results of invoking the
+** sqlite3changeset_conflict() API are undefined.
+**
+** </dl>
+*/
+#define SQLITE_CHANGESET_DATA 1
+#define SQLITE_CHANGESET_NOTFOUND 2
+#define SQLITE_CHANGESET_CONFLICT 3
+#define SQLITE_CHANGESET_CONSTRAINT 4
+#define SQLITE_CHANGESET_FOREIGN_KEY 5
+
+/*
+** CAPI3REF: Constants Returned By The Conflict Handler
+**
+** A conflict handler callback must return one of the following three values.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_OMIT<dd>
+** If a conflict handler returns this value no special action is taken. The
+** change that caused the conflict is not applied. The session module
+** continues to the next change in the changeset.
+**
+** <dt>SQLITE_CHANGESET_REPLACE<dd>
+** This value may only be returned if the second argument to the conflict
+** handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
+** is not the case, any changes applied so far are rolled back and the
+** call to sqlite3changeset_apply() returns SQLITE_MISUSE.
+**
+** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
+** handler, then the conflicting row is either updated or deleted, depending
+** on the type of change.
+**
+** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict
+** handler, then the conflicting row is removed from the database and a
+** second attempt to apply the change is made. If this second attempt fails,
+** the original row is restored to the database before continuing.
+**
+** <dt>SQLITE_CHANGESET_ABORT<dd>
+** If this value is returned, any changes applied so far are rolled back
+** and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
+** </dl>
+*/
+#define SQLITE_CHANGESET_OMIT 0
+#define SQLITE_CHANGESET_REPLACE 1
+#define SQLITE_CHANGESET_ABORT 2
+
+/*
+** CAPI3REF: Streaming Versions of API functions.
+**
+** The six streaming API xxx_strm() functions serve similar purposes to the
+** corresponding non-streaming API functions:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+** <tr><th>Streaming function<th>Non-streaming equivalent</th>
+** <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply]
+** <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat]
+** <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert]
+** <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start]
+** <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset]
+** <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset]
+** </table>
+**
+** Non-streaming functions that accept changesets (or patchsets) as input
+** require that the entire changeset be stored in a single buffer in memory.
+** Similarly, those that return a changeset or patchset do so by returning
+** a pointer to a single large buffer allocated using sqlite3_malloc().
+** Normally this is convenient. However, if an application running in a
+** low-memory environment is required to handle very large changesets, the
+** large contiguous memory allocations required can become onerous.
+**
+** In order to avoid this problem, instead of a single large buffer, input
+** is passed to a streaming API functions by way of a callback function that
+** the sessions module invokes to incrementally request input data as it is
+** required. In all cases, a pair of API function parameters such as
+**
+** <pre>
+** int nChangeset,
+** void *pChangeset,
+** </pre>
+**
+** Is replaced by:
+**
+** <pre>
+** int (*xInput)(void *pIn, void *pData, int *pnData),
+** void *pIn,
+** </pre>
+**
+** Each time the xInput callback is invoked by the sessions module, the first
+** argument passed is a copy of the supplied pIn context pointer. The second
+** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
+** error occurs the xInput method should copy up to (*pnData) bytes of data
+** into the buffer and set (*pnData) to the actual number of bytes copied
+** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
+** should be set to zero to indicate this. Or, if an error occurs, an SQLite
+** error code should be returned. In all cases, if an xInput callback returns
+** an error, all processing is abandoned and the streaming API function
+** returns a copy of the error code to the caller.
+**
+** In the case of sqlite3changeset_start_strm(), the xInput callback may be
+** invoked by the sessions module at any point during the lifetime of the
+** iterator. If such an xInput callback returns an error, the iterator enters
+** an error state, whereby all subsequent calls to iterator functions
+** immediately fail with the same error code as returned by xInput.
+**
+** Similarly, streaming API functions that return changesets (or patchsets)
+** return them in chunks by way of a callback function instead of via a
+** pointer to a single large buffer. In this case, a pair of parameters such
+** as:
+**
+** <pre>
+** int *pnChangeset,
+** void **ppChangeset,
+** </pre>
+**
+** Is replaced by:
+**
+** <pre>
+** int (*xOutput)(void *pOut, const void *pData, int nData),
+** void *pOut
+** </pre>
+**
+** The xOutput callback is invoked zero or more times to return data to
+** the application. The first parameter passed to each call is a copy of the
+** pOut pointer supplied by the application. The second parameter, pData,
+** points to a buffer nData bytes in size containing the chunk of output
+** data being returned. If the xOutput callback successfully processes the
+** supplied data, it should return SQLITE_OK to indicate success. Otherwise,
+** it should return some other SQLite error code. In this case processing
+** is immediately abandoned and the streaming API function returns a copy
+** of the xOutput error code to the application.
+**
+** The sessions module never invokes an xOutput callback with the third
+** parameter set to a value less than or equal to zero. Other than this,
+** no guarantees are made as to the size of the chunks of data returned.
+*/
+SQLITE_API int sqlite3changeset_apply_strm(
+ sqlite3 *db, /* Apply change to "main" db of this handle */
+ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+ void *pIn, /* First arg for xInput */
+ int(*xFilter)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ const char *zTab /* Table name */
+ ),
+ int(*xConflict)(
+ void *pCtx, /* Copy of sixth arg to _apply() */
+ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
+ sqlite3_changeset_iter *p /* Handle describing change and conflict */
+ ),
+ void *pCtx /* First argument passed to xConflict */
+);
+SQLITE_API int sqlite3changeset_concat_strm(
+ int (*xInputA)(void *pIn, void *pData, int *pnData),
+ void *pInA,
+ int (*xInputB)(void *pIn, void *pData, int *pnData),
+ void *pInB,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3changeset_invert_strm(
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3changeset_start_strm(
+ sqlite3_changeset_iter **pp,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn
+);
+SQLITE_API int sqlite3session_changeset_strm(
+ sqlite3_session *pSession,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3session_patchset_strm(
+ sqlite3_session *pSession,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+SQLITE_API int sqlite3changegroup_add_strm(sqlite3_changegroup*,
+ int (*xInput)(void *pIn, void *pData, int *pnData),
+ void *pIn
+);
+SQLITE_API int sqlite3changegroup_output_strm(sqlite3_changegroup*,
+ int (*xOutput)(void *pOut, const void *pData, int nData),
+ void *pOut
+);
+
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION) */
+
+/******** End of sqlite3session.h *********/
+/******** Begin file fts5.h *********/
+/*
+** 2014 May 31
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** Interfaces to extend FTS5. Using the interfaces defined in this file,
+** FTS5 may be extended with:
+**
+** * custom tokenizers, and
+** * custom auxiliary functions.
+*/
+
+
+#ifndef _FTS5_H
+#define _FTS5_H
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*************************************************************************
+** CUSTOM AUXILIARY FUNCTIONS
+**
+** Virtual table implementations may overload SQL functions by implementing
+** the sqlite3_module.xFindFunction() method.
+*/
+
+typedef struct Fts5ExtensionApi Fts5ExtensionApi;
+typedef struct Fts5Context Fts5Context;
+typedef struct Fts5PhraseIter Fts5PhraseIter;
+
+typedef void (*fts5_extension_function)(
+ const Fts5ExtensionApi *pApi, /* API offered by current FTS version */
+ Fts5Context *pFts, /* First arg to pass to pApi functions */
+ sqlite3_context *pCtx, /* Context for returning result/error */
+ int nVal, /* Number of values in apVal[] array */
+ sqlite3_value **apVal /* Array of trailing arguments */
+);
+
+struct Fts5PhraseIter {
+ const unsigned char *a;
+ const unsigned char *b;
+};
+
+/*
+** EXTENSION API FUNCTIONS
+**
+** xUserData(pFts):
+** Return a copy of the context pointer the extension function was
+** registered with.
+**
+** xColumnTotalSize(pFts, iCol, pnToken):
+** If parameter iCol is less than zero, set output variable *pnToken
+** to the total number of tokens in the FTS5 table. Or, if iCol is
+** non-negative but less than the number of columns in the table, return
+** the total number of tokens in column iCol, considering all rows in
+** the FTS5 table.
+**
+** If parameter iCol is greater than or equal to the number of columns
+** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
+** an OOM condition or IO error), an appropriate SQLite error code is
+** returned.
+**
+** xColumnCount(pFts):
+** Return the number of columns in the table.
+**
+** xColumnSize(pFts, iCol, pnToken):
+** If parameter iCol is less than zero, set output variable *pnToken
+** to the total number of tokens in the current row. Or, if iCol is
+** non-negative but less than the number of columns in the table, set
+** *pnToken to the number of tokens in column iCol of the current row.
+**
+** If parameter iCol is greater than or equal to the number of columns
+** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
+** an OOM condition or IO error), an appropriate SQLite error code is
+** returned.
+**
+** This function may be quite inefficient if used with an FTS5 table
+** created with the "columnsize=0" option.
+**
+** xColumnText:
+** This function attempts to retrieve the text of column iCol of the
+** current document. If successful, (*pz) is set to point to a buffer
+** containing the text in utf-8 encoding, (*pn) is set to the size in bytes
+** (not characters) of the buffer and SQLITE_OK is returned. Otherwise,
+** if an error occurs, an SQLite error code is returned and the final values
+** of (*pz) and (*pn) are undefined.
+**
+** xPhraseCount:
+** Returns the number of phrases in the current query expression.
+**
+** xPhraseSize:
+** Returns the number of tokens in phrase iPhrase of the query. Phrases
+** are numbered starting from zero.
+**
+** xInstCount:
+** Set *pnInst to the total number of occurrences of all phrases within
+** the query within the current row. Return SQLITE_OK if successful, or
+** an error code (i.e. SQLITE_NOMEM) if an error occurs.
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
+** (i.e. if it is a contentless table), then this API always returns 0.
+**
+** xInst:
+** Query for the details of phrase match iIdx within the current row.
+** Phrase matches are numbered starting from zero, so the iIdx argument
+** should be greater than or equal to zero and smaller than the value
+** output by xInstCount().
+**
+** Usually, output parameter *piPhrase is set to the phrase number, *piCol
+** to the column in which it occurs and *piOff the token offset of the
+** first token of the phrase. The exception is if the table was created
+** with the offsets=0 option specified. In this case *piOff is always
+** set to -1.
+**
+** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM)
+** if an error occurs.
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option.
+**
+** xRowid:
+** Returns the rowid of the current row.
+**
+** xTokenize:
+** Tokenize text using the tokenizer belonging to the FTS5 table.
+**
+** xQueryPhrase(pFts5, iPhrase, pUserData, xCallback):
+** This API function is used to query the FTS table for phrase iPhrase
+** of the current query. Specifically, a query equivalent to:
+**
+** ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
+**
+** with $p set to a phrase equivalent to the phrase iPhrase of the
+** current query is executed. Any column filter that applies to
+** phrase iPhrase of the current query is included in $p. For each
+** row visited, the callback function passed as the fourth argument
+** is invoked. The context and API objects passed to the callback
+** function may be used to access the properties of each matched row.
+** Invoking Api.xUserData() returns a copy of the pointer passed as
+** the third argument to pUserData.
+**
+** If the callback function returns any value other than SQLITE_OK, the
+** query is abandoned and the xQueryPhrase function returns immediately.
+** If the returned value is SQLITE_DONE, xQueryPhrase returns SQLITE_OK.
+** Otherwise, the error code is propagated upwards.
+**
+** If the query runs to completion without incident, SQLITE_OK is returned.
+** Or, if some error occurs before the query completes or is aborted by
+** the callback, an SQLite error code is returned.
+**
+**
+** xSetAuxdata(pFts5, pAux, xDelete)
+**
+** Save the pointer passed as the second argument as the extension functions
+** "auxiliary data". The pointer may then be retrieved by the current or any
+** future invocation of the same fts5 extension function made as part of
+** of the same MATCH query using the xGetAuxdata() API.
+**
+** Each extension function is allocated a single auxiliary data slot for
+** each FTS query (MATCH expression). If the extension function is invoked
+** more than once for a single FTS query, then all invocations share a
+** single auxiliary data context.
+**
+** If there is already an auxiliary data pointer when this function is
+** invoked, then it is replaced by the new pointer. If an xDelete callback
+** was specified along with the original pointer, it is invoked at this
+** point.
+**
+** The xDelete callback, if one is specified, is also invoked on the
+** auxiliary data pointer after the FTS5 query has finished.
+**
+** If an error (e.g. an OOM condition) occurs within this function, an
+** the auxiliary data is set to NULL and an error code returned. If the
+** xDelete parameter was not NULL, it is invoked on the auxiliary data
+** pointer before returning.
+**
+**
+** xGetAuxdata(pFts5, bClear)
+**
+** Returns the current auxiliary data pointer for the fts5 extension
+** function. See the xSetAuxdata() method for details.
+**
+** If the bClear argument is non-zero, then the auxiliary data is cleared
+** (set to NULL) before this function returns. In this case the xDelete,
+** if any, is not invoked.
+**
+**
+** xRowCount(pFts5, pnRow)
+**
+** This function is used to retrieve the total number of rows in the table.
+** In other words, the same value that would be returned by:
+**
+** SELECT count(*) FROM ftstable;
+**
+** xPhraseFirst()
+** This function is used, along with type Fts5PhraseIter and the xPhraseNext
+** method, to iterate through all instances of a single query phrase within
+** the current row. This is the same information as is accessible via the
+** xInstCount/xInst APIs. While the xInstCount/xInst APIs are more convenient
+** to use, this API may be faster under some circumstances. To iterate
+** through instances of phrase iPhrase, use the following code:
+**
+** Fts5PhraseIter iter;
+** int iCol, iOff;
+** for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
+** iCol>=0;
+** pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
+** ){
+** // An instance of phrase iPhrase at offset iOff of column iCol
+** }
+**
+** The Fts5PhraseIter structure is defined above. Applications should not
+** modify this structure directly - it should only be used as shown above
+** with the xPhraseFirst() and xPhraseNext() API methods (and by
+** xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
+** (i.e. if it is a contentless table), then this API always iterates
+** through an empty set (all calls to xPhraseFirst() set iCol to -1).
+**
+** xPhraseNext()
+** See xPhraseFirst above.
+**
+** xPhraseFirstColumn()
+** This function and xPhraseNextColumn() are similar to the xPhraseFirst()
+** and xPhraseNext() APIs described above. The difference is that instead
+** of iterating through all instances of a phrase in the current row, these
+** APIs are used to iterate through the set of columns in the current row
+** that contain one or more instances of a specified phrase. For example:
+**
+** Fts5PhraseIter iter;
+** int iCol;
+** for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
+** iCol>=0;
+** pApi->xPhraseNextColumn(pFts, &iter, &iCol)
+** ){
+** // Column iCol contains at least one instance of phrase iPhrase
+** }
+**
+** This API can be quite slow if used with an FTS5 table created with the
+** "detail=none" option. If the FTS5 table is created with either
+** "detail=none" "content=" option (i.e. if it is a contentless table),
+** then this API always iterates through an empty set (all calls to
+** xPhraseFirstColumn() set iCol to -1).
+**
+** The information accessed using this API and its companion
+** xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
+** (or xInst/xInstCount). The chief advantage of this API is that it is
+** significantly more efficient than those alternatives when used with
+** "detail=column" tables.
+**
+** xPhraseNextColumn()
+** See xPhraseFirstColumn above.
+*/
+struct Fts5ExtensionApi {
+ int iVersion; /* Currently always set to 3 */
+
+ void *(*xUserData)(Fts5Context*);
+
+ int (*xColumnCount)(Fts5Context*);
+ int (*xRowCount)(Fts5Context*, sqlite3_int64 *pnRow);
+ int (*xColumnTotalSize)(Fts5Context*, int iCol, sqlite3_int64 *pnToken);
+
+ int (*xTokenize)(Fts5Context*,
+ const char *pText, int nText, /* Text to tokenize */
+ void *pCtx, /* Context passed to xToken() */
+ int (*xToken)(void*, int, const char*, int, int, int) /* Callback */
+ );
+
+ int (*xPhraseCount)(Fts5Context*);
+ int (*xPhraseSize)(Fts5Context*, int iPhrase);
+
+ int (*xInstCount)(Fts5Context*, int *pnInst);
+ int (*xInst)(Fts5Context*, int iIdx, int *piPhrase, int *piCol, int *piOff);
+
+ sqlite3_int64 (*xRowid)(Fts5Context*);
+ int (*xColumnText)(Fts5Context*, int iCol, const char **pz, int *pn);
+ int (*xColumnSize)(Fts5Context*, int iCol, int *pnToken);
+
+ int (*xQueryPhrase)(Fts5Context*, int iPhrase, void *pUserData,
+ int(*)(const Fts5ExtensionApi*,Fts5Context*,void*)
+ );
+ int (*xSetAuxdata)(Fts5Context*, void *pAux, void(*xDelete)(void*));
+ void *(*xGetAuxdata)(Fts5Context*, int bClear);
+
+ int (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
+ void (*xPhraseNext)(Fts5Context*, Fts5PhraseIter*, int *piCol, int *piOff);
+
+ int (*xPhraseFirstColumn)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*);
+ void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
+};
+
+/*
+** CUSTOM AUXILIARY FUNCTIONS
+*************************************************************************/
+
+/*************************************************************************
+** CUSTOM TOKENIZERS
+**
+** Applications may also register custom tokenizer types. A tokenizer
+** is registered by providing fts5 with a populated instance of the
+** following structure. All structure methods must be defined, setting
+** any member of the fts5_tokenizer struct to NULL leads to undefined
+** behaviour. The structure methods are expected to function as follows:
+**
+** xCreate:
+** This function is used to allocate and initialize a tokenizer instance.
+** A tokenizer instance is required to actually tokenize text.
+**
+** The first argument passed to this function is a copy of the (void*)
+** pointer provided by the application when the fts5_tokenizer object
+** was registered with FTS5 (the third argument to xCreateTokenizer()).
+** The second and third arguments are an array of nul-terminated strings
+** containing the tokenizer arguments, if any, specified following the
+** tokenizer name as part of the CREATE VIRTUAL TABLE statement used
+** to create the FTS5 table.
+**
+** The final argument is an output variable. If successful, (*ppOut)
+** should be set to point to the new tokenizer handle and SQLITE_OK
+** returned. If an error occurs, some value other than SQLITE_OK should
+** be returned. In this case, fts5 assumes that the final value of *ppOut
+** is undefined.
+**
+** xDelete:
+** This function is invoked to delete a tokenizer handle previously
+** allocated using xCreate(). Fts5 guarantees that this function will
+** be invoked exactly once for each successful call to xCreate().
+**
+** xTokenize:
+** This function is expected to tokenize the nText byte string indicated
+** by argument pText. pText may or may not be nul-terminated. The first
+** argument passed to this function is a pointer to an Fts5Tokenizer object
+** returned by an earlier call to xCreate().
+**
+** The second argument indicates the reason that FTS5 is requesting
+** tokenization of the supplied text. This is always one of the following
+** four values:
+**
+** <ul><li> <b>FTS5_TOKENIZE_DOCUMENT</b> - A document is being inserted into
+** or removed from the FTS table. The tokenizer is being invoked to
+** determine the set of tokens to add to (or delete from) the
+** FTS index.
+**
+** <li> <b>FTS5_TOKENIZE_QUERY</b> - A MATCH query is being executed
+** against the FTS index. The tokenizer is being called to tokenize
+** a bareword or quoted string specified as part of the query.
+**
+** <li> <b>(FTS5_TOKENIZE_QUERY | FTS5_TOKENIZE_PREFIX)</b> - Same as
+** FTS5_TOKENIZE_QUERY, except that the bareword or quoted string is
+** followed by a "*" character, indicating that the last token
+** returned by the tokenizer will be treated as a token prefix.
+**
+** <li> <b>FTS5_TOKENIZE_AUX</b> - The tokenizer is being invoked to
+** satisfy an fts5_api.xTokenize() request made by an auxiliary
+** function. Or an fts5_api.xColumnSize() request made by the same
+** on a columnsize=0 database.
+** </ul>
+**
+** For each token in the input string, the supplied callback xToken() must
+** be invoked. The first argument to it should be a copy of the pointer
+** passed as the second argument to xTokenize(). The third and fourth
+** arguments are a pointer to a buffer containing the token text, and the
+** size of the token in bytes. The 4th and 5th arguments are the byte offsets
+** of the first byte of and first byte immediately following the text from
+** which the token is derived within the input.
+**
+** The second argument passed to the xToken() callback ("tflags") should
+** normally be set to 0. The exception is if the tokenizer supports
+** synonyms. In this case see the discussion below for details.
+**
+** FTS5 assumes the xToken() callback is invoked for each token in the
+** order that they occur within the input text.
+**
+** If an xToken() callback returns any value other than SQLITE_OK, then
+** the tokenization should be abandoned and the xTokenize() method should
+** immediately return a copy of the xToken() return value. Or, if the
+** input buffer is exhausted, xTokenize() should return SQLITE_OK. Finally,
+** if an error occurs with the xTokenize() implementation itself, it
+** may abandon the tokenization and return any error code other than
+** SQLITE_OK or SQLITE_DONE.
+**
+** SYNONYM SUPPORT
+**
+** Custom tokenizers may also support synonyms. Consider a case in which a
+** user wishes to query for a phrase such as "first place". Using the
+** built-in tokenizers, the FTS5 query 'first + place' will match instances
+** of "first place" within the document set, but not alternative forms
+** such as "1st place". In some applications, it would be better to match
+** all instances of "first place" or "1st place" regardless of which form
+** the user specified in the MATCH query text.
+**
+** There are several ways to approach this in FTS5:
+**
+** <ol><li> By mapping all synonyms to a single token. In this case, the
+** In the above example, this means that the tokenizer returns the
+** same token for inputs "first" and "1st". Say that token is in
+** fact "first", so that when the user inserts the document "I won
+** 1st place" entries are added to the index for tokens "i", "won",
+** "first" and "place". If the user then queries for '1st + place',
+** the tokenizer substitutes "first" for "1st" and the query works
+** as expected.
+**
+** <li> By adding multiple synonyms for a single term to the FTS index.
+** In this case, when tokenizing query text, the tokenizer may
+** provide multiple synonyms for a single term within the document.
+** FTS5 then queries the index for each synonym individually. For
+** example, faced with the query:
+**
+** <codeblock>
+** ... MATCH 'first place'</codeblock>
+**
+** the tokenizer offers both "1st" and "first" as synonyms for the
+** first token in the MATCH query and FTS5 effectively runs a query
+** similar to:
+**
+** <codeblock>
+** ... MATCH '(first OR 1st) place'</codeblock>
+**
+** except that, for the purposes of auxiliary functions, the query
+** still appears to contain just two phrases - "(first OR 1st)"
+** being treated as a single phrase.
+**
+** <li> By adding multiple synonyms for a single term to the FTS index.
+** Using this method, when tokenizing document text, the tokenizer
+** provides multiple synonyms for each token. So that when a
+** document such as "I won first place" is tokenized, entries are
+** added to the FTS index for "i", "won", "first", "1st" and
+** "place".
+**
+** This way, even if the tokenizer does not provide synonyms
+** when tokenizing query text (it should not - to do would be
+** inefficient), it doesn't matter if the user queries for
+** 'first + place' or '1st + place', as there are entires in the
+** FTS index corresponding to both forms of the first token.
+** </ol>
+**
+** Whether it is parsing document or query text, any call to xToken that
+** specifies a <i>tflags</i> argument with the FTS5_TOKEN_COLOCATED bit
+** is considered to supply a synonym for the previous token. For example,
+** when parsing the document "I won first place", a tokenizer that supports
+** synonyms would call xToken() 5 times, as follows:
+**
+** <codeblock>
+** xToken(pCtx, 0, "i", 1, 0, 1);
+** xToken(pCtx, 0, "won", 3, 2, 5);
+** xToken(pCtx, 0, "first", 5, 6, 11);
+** xToken(pCtx, FTS5_TOKEN_COLOCATED, "1st", 3, 6, 11);
+** xToken(pCtx, 0, "place", 5, 12, 17);
+**</codeblock>
+**
+** It is an error to specify the FTS5_TOKEN_COLOCATED flag the first time
+** xToken() is called. Multiple synonyms may be specified for a single token
+** by making multiple calls to xToken(FTS5_TOKEN_COLOCATED) in sequence.
+** There is no limit to the number of synonyms that may be provided for a
+** single token.
+**
+** In many cases, method (1) above is the best approach. It does not add
+** extra data to the FTS index or require FTS5 to query for multiple terms,
+** so it is efficient in terms of disk space and query speed. However, it
+** does not support prefix queries very well. If, as suggested above, the
+** token "first" is subsituted for "1st" by the tokenizer, then the query:
+**
+** <codeblock>
+** ... MATCH '1s*'</codeblock>
+**
+** will not match documents that contain the token "1st" (as the tokenizer
+** will probably not map "1s" to any prefix of "first").
+**
+** For full prefix support, method (3) may be preferred. In this case,
+** because the index contains entries for both "first" and "1st", prefix
+** queries such as 'fi*' or '1s*' will match correctly. However, because
+** extra entries are added to the FTS index, this method uses more space
+** within the database.
+**
+** Method (2) offers a midpoint between (1) and (3). Using this method,
+** a query such as '1s*' will match documents that contain the literal
+** token "1st", but not "first" (assuming the tokenizer is not able to
+** provide synonyms for prefixes). However, a non-prefix query like '1st'
+** will match against "1st" and "first". This method does not require
+** extra disk space, as no extra entries are added to the FTS index.
+** On the other hand, it may require more CPU cycles to run MATCH queries,
+** as separate queries of the FTS index are required for each synonym.
+**
+** When using methods (2) or (3), it is important that the tokenizer only
+** provide synonyms when tokenizing document text (method (2)) or query
+** text (method (3)), not both. Doing so will not cause any errors, but is
+** inefficient.
+*/
+typedef struct Fts5Tokenizer Fts5Tokenizer;
+typedef struct fts5_tokenizer fts5_tokenizer;
+struct fts5_tokenizer {
+ int (*xCreate)(void*, const char **azArg, int nArg, Fts5Tokenizer **ppOut);
+ void (*xDelete)(Fts5Tokenizer*);
+ int (*xTokenize)(Fts5Tokenizer*,
+ void *pCtx,
+ int flags, /* Mask of FTS5_TOKENIZE_* flags */
+ const char *pText, int nText,
+ int (*xToken)(
+ void *pCtx, /* Copy of 2nd argument to xTokenize() */
+ int tflags, /* Mask of FTS5_TOKEN_* flags */
+ const char *pToken, /* Pointer to buffer containing token */
+ int nToken, /* Size of token in bytes */
+ int iStart, /* Byte offset of token within input text */
+ int iEnd /* Byte offset of end of token within input text */
+ )
+ );
+};
+
+/* Flags that may be passed as the third argument to xTokenize() */
+#define FTS5_TOKENIZE_QUERY 0x0001
+#define FTS5_TOKENIZE_PREFIX 0x0002
+#define FTS5_TOKENIZE_DOCUMENT 0x0004
+#define FTS5_TOKENIZE_AUX 0x0008
+
+/* Flags that may be passed by the tokenizer implementation back to FTS5
+** as the third argument to the supplied xToken callback. */
+#define FTS5_TOKEN_COLOCATED 0x0001 /* Same position as prev. token */
+
+/*
+** END OF CUSTOM TOKENIZERS
+*************************************************************************/
+
+/*************************************************************************
+** FTS5 EXTENSION REGISTRATION API
+*/
+typedef struct fts5_api fts5_api;
+struct fts5_api {
+ int iVersion; /* Currently always set to 2 */
+
+ /* Create a new tokenizer */
+ int (*xCreateTokenizer)(
+ fts5_api *pApi,
+ const char *zName,
+ void *pContext,
+ fts5_tokenizer *pTokenizer,
+ void (*xDestroy)(void*)
+ );
+
+ /* Find an existing tokenizer */
+ int (*xFindTokenizer)(
+ fts5_api *pApi,
+ const char *zName,
+ void **ppContext,
+ fts5_tokenizer *pTokenizer
+ );
+
+ /* Create a new auxiliary function */
+ int (*xCreateFunction)(
+ fts5_api *pApi,
+ const char *zName,
+ void *pContext,
+ fts5_extension_function xFunction,
+ void (*xDestroy)(void*)
+ );
+};
+
+/*
+** END OF REGISTRATION API
+*************************************************************************/
+
+#ifdef __cplusplus
+} /* end of the 'extern "C"' block */
+#endif
+
+#endif /* _FTS5_H */
+
+/******** End of fts5.h *********/
projects / irc / quakenet / newserv.git / blobdiff