]> jfr.im git - irc/freenode/solanum.git/blob - doc/reference.conf
e17e70ba86d1608d4004f6679830d6cb2286bfb5
[irc/freenode/solanum.git] / doc / reference.conf
1 /* doc/reference.conf - solanum example configuration file
2 *
3 * Copyright (C) 2000-2002 Hybrid Development Team
4 * Copyright (C) 2002-2005 ircd-ratbox development team
5 * Copyright (C) 2005-2006 charybdis development team
6 *
7 * Written by ejb, wcampbel, db, leeh and others
8 *
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * class {} blocks MUST be specified before anything that uses them. That
14 * means they must be defined before auth {} and before connect {}.
15 *
16 * auth {} blocks MUST be specified in order of precedence. The first one
17 * that matches a user will be used. So place spoofs first, then specials,
18 * then general access, then restricted.
19 *
20 * privset {} blocks MUST be specified before anything that uses them. That
21 * means they must be defined before operator {}.
22 *
23 * Both shell style (#) and C style comments are supported.
24 *
25 * Files may be included by either:
26 * .include "filename"
27 * .include <filename>
28 *
29 * Times/durations are written as:
30 * 12 hours 30 minutes 1 second
31 *
32 * Valid units of time:
33 * month, week, day, hour, minute, second
34 *
35 * Valid units of size:
36 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
37 *
38 * Sizes and times may be singular or plural.
39 */
40
41 /* Extensions:
42 *
43 * Charybdis contains several extensions that are not enabled by default.
44 * To use them, uncomment the lines below.
45 *
46 * Channel mode +-A (admin only) -- chm_adminonly
47 * Channel mode +-T (blocks notices) -- chm_nonotice
48 * Channel mode +-O (oper only) -- chm_operonly
49 * Channel mode +-S (ssl only) -- chm_sslonly
50 * Channel mode +-M (disallow KICK on IRC ops) -- chm_operpeace
51 * Restrict channel creation to logged in users -- createauthonly
52 * Account bans (+b $a[:mask]) -- extb_account
53 * Banned from another channel (+b $j:mask) -- extb_canjoin
54 * Other-channel bans (+b $c:mask) -- extb_channel
55 * Combination extbans -- extb_combi
56 * Extended ban (+b $x:mask) -- extb_extgecos
57 * Hostmask bans (for combination extbans) -- extb_hostmask
58 * Oper bans (+b $o) -- extb_oper
59 * Realname (gecos) bans (+b $r:mask) -- extb_realname
60 * Server bans (+b $s:mask) -- extb_server
61 * SSL bans (+b $z) -- extb_ssl
62 * User mode bans (+b $u:modes) -- extb_usermode
63 * Helpops system (umode +h) -- helpops
64 * HURT system -- hurt
65 * New host mangling (umode +x) -- ip_cloaking_4.0
66 * Old host mangling (umode +h) -- ip_cloaking
67 * Dynamically extend channel limits -- m_extendchans
68 * Find channel forwards -- m_findforwards
69 * /identify support -- m_identify
70 * /locops support -- m_locops
71 * Opers cannot be invisible (umode +i) -- no_oper_invis
72 * Far connection notices (snomask +F) -- sno_farconnect
73 * Remote k/d/x line active notices -- sno_globalkline
74 * Remote oper up notices -- sno_globaloper
75 * Global nick-change notices -- sno_globalnickchange
76 * /whois notifications (snomask +W) -- sno_whois
77 * Oper-override (modehacking only) -- override
78 * Stop services kills -- no_kill_services
79 */
80 #loadmodule "extensions/chm_adminonly";
81 #loadmodule "extensions/chm_nonotice";
82 #loadmodule "extensions/chm_operonly";
83 #loadmodule "extensions/chm_sslonly";
84 #loadmodule "extensions/chm_operpeace";
85 #loadmodule "extensions/createauthonly";
86 #loadmodule "extensions/extb_account";
87 #loadmodule "extensions/extb_canjoin";
88 #loadmodule "extensions/extb_channel";
89 #loadmodule "extensions/extb_combi";
90 #loadmodule "extensions/extb_extgecos";
91 #loadmodule "extensions/extb_hostmask";
92 #loadmodule "extensions/extb_oper";
93 #loadmodule "extensions/extb_realname";
94 #loadmodule "extensions/extb_server";
95 #loadmodule "extensions/extb_ssl";
96 #loadmodule "extensions/extb_usermode";
97 #loadmodule "extensions/helpops";
98 #loadmodule "extensions/hurt";
99 #loadmodule "extensions/ip_cloaking_4.0";
100 #loadmodule "extensions/ip_cloaking";
101 #loadmodule "extensions/m_extendchans";
102 #loadmodule "extensions/m_findforwards";
103 #loadmodule "extensions/m_identify";
104 #loadmodule "extensions/m_locops";
105 #loadmodule "extensions/no_oper_invis";
106 #loadmodule "extensions/sno_farconnect";
107 #loadmodule "extensions/sno_globalkline";
108 #loadmodule "extensions/sno_globalnickchange";
109 #loadmodule "extensions/sno_globaloper";
110 #loadmodule "extensions/sno_whois";
111 #loadmodule "extensions/override";
112 #loadmodule "extensions/no_kill_services";
113
114 /* serverinfo {}: Contains information about the server. (OLD M:) */
115 serverinfo {
116 /* name: the name of our server */
117 name = "hades.arpa";
118
119 /* sid: the unique server id of our server. This must be three
120 * characters long. The first character must be a digit [0-9], the
121 * remaining two chars may be letters [A-Z] or digits [0-9].
122 *
123 * This parameter must be specified for the server to start.
124 */
125 sid = "42X";
126
127 /* description: the description of our server. '[' and ']' may not
128 * be used here for compatibility with older servers.
129 */
130 description = "charybdis test server";
131
132 /* network info: the name and description of the network this server
133 * is on. Shown in the 005 reply and used with serverhiding.
134 */
135 network_name = "MyNet";
136
137 /* vhost: the IP to bind to when we connect outward to ipv4 servers.
138 * This should be an ipv4 IP only.
139 */
140 #vhost = "192.0.2.6";
141
142 /* vhost6: the IP to bind to when we connect outward to ipv6 servers.
143 * This should be an ipv6 IP only.
144 */
145 #vhost6 = "2001:db8:2::6";
146
147 /* ssl_cert: certificate (and optionally key) for our ssl server */
148 ssl_cert = "etc/ssl.pem";
149
150 /* ssl_private_key: our ssl private key (if not contained in ssl_cert file) */
151 #ssl_private_key = "etc/ssl.key";
152
153 /* ssl_dh_params: DH parameters, generate with openssl dhparam -out dh.pem 2048 */
154 /* If you do not provide parameters, some TLS backends will fail on DHE- ciphers,
155 and some will succeed but use weak, common DH groups! */
156 ssl_dh_params = "etc/dh.pem";
157
158 /* ssl_cipher_list: A list of ciphers, dependent on your TLS backend */
159 #ssl_cipher_list = "EECDH+HIGH:EDH+HIGH:HIGH:!aNULL";
160
161 /* ssld_count: number of ssld processes you want to start, if you
162 * have a really busy server, using N-1 where N is the number of
163 * cpu/cpu cores you have might be useful. A number greater than one
164 * can also be useful in case of bugs in ssld and because ssld needs
165 * two file descriptors per SSL connection.
166 */
167 ssld_count = 1;
168
169 /* default max clients: the default maximum number of clients
170 * allowed to connect. This can be changed once ircd has started by
171 * issuing:
172 * /quote set maxclients <limit>
173 */
174 default_max_clients = 1024;
175
176 /* nicklen: enforced nickname length (for this server only; must not
177 * be longer than the maximum length set while building).
178 */
179 nicklen = 30;
180 };
181
182 /* admin {}: contains admin information about the server. (OLD A:) */
183 admin {
184 name = "Smurf target";
185 description = "Main Server Administrator";
186 email = "<syn@packets.r.us>";
187 };
188
189 /* log {}: contains information about logfiles. */
190 log {
191 /* logfiles: the logfiles to use for specific activity. if these
192 * paths are defined, then ircd will log to them, otherwise it wont.
193 *
194 * The confs are, in order:
195 * - userlog: user exits
196 * - fuserlog: failed user connections
197 * - operlog: /oper usage
198 * - foperlog: failed /oper usage
199 * - serverlog: server connects/disconnects
200 * - klinelog: klines, etc
201 * - killlog: kills
202 * - operspylog: operspy usage
203 * - ioerrorlog: IO errors
204 */
205 fname_userlog = "logs/userlog";
206 #fname_fuserlog = "logs/fuserlog";
207 fname_operlog = "logs/operlog";
208 #fname_foperlog = "logs/foperlog";
209 fname_serverlog = "logs/serverlog";
210 #fname_klinelog = "logs/klinelog";
211 fname_killlog = "logs/killlog";
212 fname_operspylog = "logs/operspylog";
213 #fname_ioerrorlog = "logs/ioerror";
214 };
215
216 /* class {}: contain information about classes for users (OLD Y:) */
217 class "users" {
218 /* class name must go above */
219
220 /* ping time: how often a client must reply to a PING from the
221 * server before they are dropped.
222 */
223 ping_time = 2 minutes;
224
225 /* number per ident: the number of users per user@host networkwide
226 * allowed to connect. Unidented connections are classified as
227 * the same ident.
228 */
229 number_per_ident = 2;
230
231 /* number per ip: the number of local users per host allowed */
232 number_per_ip = 3;
233
234 /* number per ip global: the number of network wide connections
235 * per host allowed for a user, including connections to the
236 * local server.
237 */
238 number_per_ip_global = 5;
239
240 /* cidr_ipv4_bitlen: Limits numbers of connections from a subnet size
241 */
242 cidr_ipv4_bitlen = 24;
243
244 /* cidr_ipv6_bitlen: Limits numbers of connections from a subnet size
245 * the following example makes the subnet /64 this is useful
246 * for IPv6 connections in particular
247 */
248 cidr_ipv6_bitlen = 64;
249
250 /* number_per_cidr: Number of connections to allow from a subnet of the
251 * size given in cidr_ipv4_bitlen/cidr_ipv6_bitlen.
252 * 4 seems to be a good default to me.
253 */
254 number_per_cidr = 4;
255
256 /* max number: the maximum number of users allowed in this class */
257 max_number = 100;
258
259 /* sendq: the amount of data allowed in a clients queue before
260 * they are dropped.
261 */
262 sendq = 100 kbytes;
263 };
264
265 class "restricted" {
266 ping_time = 1 minute 30 seconds;
267 number_per_ip = 1;
268 max_number = 100;
269 sendq = 60kb;
270 };
271
272 class "opers" {
273 ping_time = 5 minutes;
274 number_per_ip = 10;
275 max_number = 100;
276 sendq = 100kbytes;
277 };
278
279 class "server" {
280 ping_time = 5 minutes;
281
282 /* connectfreq: only used in server classes. specifies the delay
283 * between autoconnecting to servers.
284 */
285 connectfreq = 5 minutes;
286
287 /* max_autoconn: the amount of servers to autoconnect to. if the number
288 * of servers in the class is or exceeds this, no more servers in the
289 * class are autoconnected. oper initiated connects are unaffected.
290 * this should usually be set to either 0 or 1. (autoconnecting from
291 * hubs to leaves may cause leaves to function as hubs by having
292 * multiple servers connected to them.)
293 */
294 max_autoconn = 1;
295
296 /* max_number: the maximum number of servers allowed in this class */
297 max_number = 100;
298
299 /* sendq: servers need a higher sendq as they are sent more data */
300 sendq = 2 megabytes;
301 };
302
303 /* listen {}: contain information about the ports ircd listens on (OLD P:) */
304 listen {
305 /* defer_accept: wait for clients to send IRC handshake data before
306 * accepting them. if you intend to use software which depends on the
307 * server replying first, such as BOPM, you should disable this feature.
308 * otherwise, you probably want to leave it on.
309 */
310 defer_accept = yes;
311
312 /* port: the specific port to listen on. if no host is specified
313 * before, it will listen on all available IPs.
314 *
315 * sslport: the specific port to listen ssl connections on. if no
316 * host is specified before, it will listen on all available IPs.
317 *
318 * ports are seperated via a comma, a range may be specified using ".."
319 */
320
321 /* port: listen on all available IPs, ports 5000 and 6665 to 6669 */
322 port = 5000, 6665 .. 6669;
323
324 /* sslport: listen for ssl connections on all available IPs, port 6697 */
325 sslport = 6697;
326
327 /* host: set a specific IP/host the ports after the line will listen
328 * on. This may be ipv4 or ipv6.
329 */
330 host = "192.0.2.6";
331 port = 7000, 7001;
332 sslport = 9000, 9001;
333
334 host = "2001:db8:2::6";
335 port = 7002;
336 sslport = 9002;
337
338 /* wsock: listeners defined with this option enabled will be websocket listeners,
339 * and will not accept normal clients.
340 */
341 wsock = yes;
342 sslport = 9999;
343 };
344
345 /* auth {}: allow users to connect to the ircd (OLD I:) */
346 auth {
347 /* user: the user@host allowed to connect. Multiple IPv4/IPv6 user
348 * lines are permitted per auth block. This is matched against the
349 * hostname and IP address (using :: shortening for IPv6 and
350 * prepending a 0 if it starts with a colon) and can also use CIDR
351 * masks.
352 */
353 user = "*@198.51.100.0/24";
354 user = "*test@2001:db8:1:*";
355
356 /* auth_user: This allows specifying a username:password instead of
357 * just a password in PASS, so that a fixed user@host is not
358 * necessary for a specific auth{} block.
359 */
360 #auth_user = "SomeUser";
361
362 /* password: an optional password that is required to use this block.
363 * By default this is not encrypted, specify the flag "encrypted" in
364 * flags = ...; below if it is.
365 */
366 password = "letmein";
367
368 /* spoof: fake the users user@host to be be this. You may either
369 * specify a host or a user@host to spoof to. This is free-form,
370 * just do everyone a favour and dont abuse it. (OLD I: = flag)
371 */
372 spoof = "I.still.hate.packets";
373
374 /* Possible flags in auth:
375 *
376 * encrypted | password is encrypted with mkpasswd
377 * spoof_notice | give a notice when spoofing hosts
378 * exceed_limit (old > flag) | allow user to exceed class user limits
379 * kline_exempt (old ^ flag) | exempt this user from k/g/xlines,
380 * | dnsbls, and proxies
381 * dnsbl_exempt | exempt this user from dnsbls
382 * proxy_exempt | exempt this user from proxies
383 * spambot_exempt | exempt this user from spambot checks
384 * shide_exempt | exempt this user from serverhiding
385 * jupe_exempt | exempt this user from generating
386 * warnings joining juped channels
387 * resv_exempt | exempt this user from resvs
388 * flood_exempt | exempt this user from flood limits
389 * USE WITH CAUTION.
390 * no_tilde (old - flag) | don't prefix ~ to username if no ident
391 * need_ident (old + flag) | require ident for user in this class
392 * need_ssl | require SSL/TLS for user in this class
393 * need_sasl | require SASL id for user in this class
394 * extend_chans | allow this user to join more channels than normal
395 * kline_spoof_ip | if this block has a spoof host, klines match only
396 * | the spoof and not the underlying IP
397 */
398 flags = kline_exempt, exceed_limit;
399
400 /* class: the class the user is placed in */
401 class = "opers";
402 };
403
404 auth {
405 /* redirect: the server and port to redirect a user to. A user does
406 * not have to obey the redirection, the ircd just suggests to them
407 * an alternative server.
408 */
409 redirserv = "irc.example.net";
410 redirport = 6667;
411
412 user = "*.example.com";
413
414 /* class: a class is required even though it is not used */
415 class = "users";
416 };
417
418 auth {
419 user = "*@*";
420 class = "users";
421 };
422
423 /* privset{}: defines operator privilege sets. */
424 privset "local_op" {
425 /* privs: controls the activities and commands an oper is
426 * allowed to do on the server
427 *
428 * Available options:
429 *
430 * oper:general: enable most general oper privileges that came
431 * with +o in older releases
432 * auspex:oper: allows the oper to see through oper hiding
433 * auspex:umodes: allows viewing other users' modes
434 * auspex:cmodes: shows privileged cmodes
435 * auspex:hostname: shows hidden hostnames/ips
436 * oper:privs: allows /stats o/O and seeing privset in /whois
437 * oper:testline: allows /testline and /testgecos
438 * oper:kill: allows local and remote users to be /KILL'd
439 * oper:routing: allows remote SQUIT and CONNECT
440 * oper:kline: allows KLINE and DLINE
441 * oper:unkline: allows UNKLINE and UNDLINE
442 * snomask:nick_changes: allows oper to see nickchanges via snomask +n
443 * oper:rehash: allows oper to REHASH config
444 * oper:die: allows DIE and RESTART
445 * oper:admin: gives admin privileges. admins
446 * may (un)load modules and see various
447 * additional information.
448 * oper:hidden_admin: gives admin privileges except
449 * will not have the admin lines in
450 * whois.
451 * oper:xline: allows use of /quote xline/unxline
452 * oper:resv: allows /quote resv/unresv
453 * oper:cmodes: allows cmode +LP
454 * oper:operwall: allows the oper to send/receive operwalls
455 * oper:spy: allows 'operspy' features to see through +s
456 * channels etc. see /quote help operspy
457 * oper:hidden: hides the oper from /stats p
458 * oper:remoteban: allows remote kline etc
459 * oper:mass_notice: allows sending wallops and mass notices
460 * oper:grant: allows using the GRANT command
461 * usermode:servnotice: allows setting +s
462 *
463 * Privileges provided by extensions include:
464 *
465 * oper:dehelper: allows the DEHELPER command (from extensions/helpops)
466 * oper:override: enables oper override via umode +p (from extensions/override)
467 * oper:receive_immunity:
468 * confers the benefits of chmode +M (operpeace) (from extensions/chm_operpeace)
469 * usermode:helpops allows setting +h (from extensions/helpops)
470 */
471 privs = oper:general, oper:privs, oper:testline, oper:kill, oper:operwall, usermode:servnotice,
472 auspex:oper, auspex:hostname, auspex:umodes, auspex:cmodes;
473 };
474
475 privset "server_bot" {
476 /* extends: a privset to inherit in this privset */
477 extends = "local_op";
478 privs = oper:kline, oper:remoteban, snomask:nick_changes;
479 };
480
481 privset "global_op" {
482 extends = "local_op";
483 privs = oper:routing, oper:kline, oper:unkline, oper:xline,
484 oper:resv, oper:cmodes, oper:mass_notice, oper:remoteban;
485 };
486
487 privset "admin" {
488 extends = "global_op";
489 privs = oper:admin, oper:die, oper:rehash, oper:spy, oper:grant;
490 };
491
492 /* operator {}: defines ircd operators. (OLD O:) */
493 operator "god" {
494 /* name: the name of the oper must go above */
495
496 /* user: the user@host required for this operator. CIDR *is*
497 * supported now. auth{} spoofs work here, other spoofs do not.
498 * multiple user="" lines are supported.
499 */
500 user = "*god@*";
501 user = "*@127.0.0.1";
502
503 /* password: the password required to oper. Unless ~encrypted is
504 * contained in flags = ...; this will need to be encrypted using
505 * mkpasswd, MD5 is supported
506 */
507 password = "etcnjl8juSU1E";
508
509 /* rsa key: the public key for this oper when using Challenge.
510 * A password should not be defined when this is used, see
511 * doc/challenge.txt for more information.
512 */
513 #rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
514
515 /* fingerprint: if specified, the oper's client certificate
516 * fingerprint will be checked against the specified fingerprint
517 * below.
518 */
519 #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
520
521 /* umodes: the specific umodes this oper gets when they oper.
522 * If this is specified an oper will not be given oper_umodes
523 * These are described above oper_only_umodes in general {};
524 */
525 #umodes = locops, servnotice, operwall, wallop;
526
527 /* snomask: specific server notice mask on oper up.
528 * If this is specified an oper will not be given oper_snomask.
529 */
530 snomask = "+Zbfkrsuy";
531
532 /* flags: misc options for the operator. You may prefix an option
533 * with ~ to disable it, e.g. ~encrypted.
534 *
535 * Default flags are encrypted.
536 *
537 * Available options:
538 *
539 * encrypted: the password above is encrypted [DEFAULT]
540 * need_ssl: must be using SSL/TLS to oper up
541 */
542 flags = encrypted;
543
544 /* privset: privileges set to grant */
545 privset = "admin";
546 };
547
548 /* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
549 connect "irc.uplink.com" {
550 /* the name must go above */
551
552 /* host: the host or IP to connect to. If a hostname is used it
553 * must match the reverse dns of the server.
554 */
555 host = "203.0.113.3";
556
557 /* vhost: the host or IP to bind to for this connection. If this
558 * is not specified, the default vhost (in serverinfo {}) is used.
559 */
560 #vhost = "192.0.2.131";
561
562 /* passwords: the passwords we send (OLD C:) and accept (OLD N:).
563 * The remote server will have these passwords reversed.
564 */
565 send_password = "password";
566 accept_password = "anotherpassword";
567
568 /* fingerprint: if flags = ssl is specified, the server's
569 * certificate fingerprint will be checked against the fingerprint
570 * specified below. required if using flags = ssl.
571 */
572 #fingerprint = "c77106576abf7f9f90cca0f63874a60f2e40a64b";
573
574 /* port: the port to connect to this server on */
575 port = 6666;
576
577 /* class: the class this server is in */
578 class = "server";
579
580 /* flags: controls special options for this server
581 * encrypted - marks the accept_password as being crypt()'d
582 * autoconn - automatically connect to this server
583 * compressed - compress traffic via ziplinks
584 * topicburst - burst topics between servers
585 * ssl - ssl/tls encrypted server connections
586 * no-export - marks the link as a no-export link (not exported to other links)
587 */
588 flags = compressed, topicburst;
589 };
590
591 connect "ipv6.lame.server" {
592 host = "192.0.2.1";
593 host = "2001:db8:3::8";
594 send_password = "password";
595 accept_password = "password";
596 port = 6666;
597
598 /* aftype: controls whether the outgoing connection uses "ipv4" or "ipv6".
599 * Default is to try either at random.
600 */
601 aftype = ipv6;
602 class = "server";
603 };
604
605 connect "ssl.uplink.com" {
606 /* Example of ssl server-to-server connection, ssl flag doesn't need
607 * compressed flag, 'cause it uses own compression
608 */
609 host = "203.0.113.129";
610 send_password = "password";
611 accept_password = "anotherpassword";
612 port = 9999;
613 class = "server";
614 flags = ssl, topicburst;
615 };
616
617 /* cluster {}; servers that we propagate things to automatically. */
618 cluster {
619 /* name: the server to share with, this can be a wildcard and may be
620 * stacked.
621 */
622 /* flags: list of what to share, all the name lines above this (up
623 * until another flags entry) will receive these flags.
624 *
625 * kline - share perm klines
626 * tkline - share temp klines
627 * unkline - share unklines
628 * locops - share locops
629 * xline - share perm xlines
630 * txline - share temp xlines
631 * unxline - share unxlines
632 * resv - share perm resvs
633 * tresv - share temp resvs
634 * unresv - share unresvs
635 * all - share all of the above
636 */
637
638 /* share klines/unklines/xlines with *.lan */
639 name = "*.lan";
640 flags = kline, unkline, xline;
641
642 /* share locops with irc.ircd-ratbox.org and ircd.ircd-ratbox.org */
643 name = "irc.ircd-ratbox.org";
644 name = "ircd.ircd-ratbox.org";
645 flags = locops;
646 };
647
648 /* service{}: privileged servers (services). These servers have extra
649 * privileges such as setting login names on users and introducing clients
650 * with umode +S (unkickable, hide channels, etc).
651 * Do not place normal servers here.
652 * There may be only one service{} block.
653 */
654 service {
655 /* name: the server name. These may be stacked. */
656 name = "services.int";
657 };
658
659 /* exempt {}: IPs that are exempt from Dlines and rejectcache. (OLD d:) */
660 exempt {
661 ip = "192.0.2.0/24";
662
663 /* these may be stacked */
664 ip = "127.0.0.1";
665 };
666
667 /* secure {}: IPs that are considered to be secure networks, and get
668 * +Z without using TLS */
669 secure {
670 ip = "127.0.0.1";
671 };
672
673 /* The channel block contains options pertaining to channels */
674 channel {
675 /* invex: Enable/disable channel mode +I, a n!u@h list of masks
676 * that can join a +i channel without an invite.
677 */
678 use_invex = yes;
679
680 /* except: Enable/disable channel mode +e, a n!u@h list of masks
681 * that can join a channel through a ban (+b).
682 */
683 use_except = yes;
684
685 /* forward: Enable/disable channel mode +f, a channel to forward
686 * users to if they can't join because of +i etc. Also enables ban
687 * forwarding, <mask>$<channel>.
688 */
689 use_forward = yes;
690
691 /* knock: Allows users to request an invite to a channel that
692 * is locked somehow (+ikl). If the channel is +p or you are banned
693 * the knock will not be sent.
694 */
695 use_knock = yes;
696
697 /* knock delay: The amount of time a user must wait between issuing
698 * the knock command.
699 */
700 knock_delay = 5 minutes;
701
702 /* knock channel delay: How often a knock to any specific channel
703 * is permitted, regardless of the user sending the knock.
704 */
705 knock_delay_channel = 1 minute;
706
707 /* max chans: The maximum number of channels a user can join/be on. */
708 max_chans_per_user = 15;
709
710 /* max chans (large): The extended maximum number of channels a user can join. */
711 max_chans_per_user_large = 60;
712
713 /* max bans: maximum number of +b/e/I/q modes in a channel */
714 max_bans = 100;
715
716 /* max bans: maximum number of +b/e/I/q modes in a +L channel */
717 max_bans_large = 500;
718
719 /* splitcode: split users, split servers and either no join on split
720 * or no create on split must be enabled for split checking.
721 * splitmode will be entered on either split users or split servers
722 * dropping below the limit.
723 *
724 * you may force splitmode to be permanent by /quote set splitmode on
725 */
726
727 /* split users: when the usercount is lower than this level, consider
728 * ourselves split. this must be set for automatic splitmode
729 */
730 default_split_user_count = 0;
731
732 /* split servers: when the amount of servers that have acknowledged
733 * theyve finished bursting is lower than this, consider ourselves
734 * split. this must be set for automatic splitmode
735 */
736 default_split_server_count = 0;
737
738 /* split: no create: disallow users creating channels on split */
739 no_create_on_split = no;
740
741 /* split: no join: disallow users joining channels at all on a split */
742 no_join_on_split = no;
743
744 /* burst topicwho: when bursting topics, also burst the topic setter */
745 burst_topicwho = yes;
746
747 /* kick on split riding: kick users riding splits to join +i or +k
748 * channels. more precisely, if a bursting server sends an SJOIN
749 * for a channel with a lower TS with either a +i mode or a +k
750 * mode with a different key, kick all local users.
751 *
752 * note: this does not take +r, +b, +e and +I into account.
753 */
754 kick_on_split_riding = no;
755
756 /* only ascii channels: disable local users joining channels
757 * containing characters outside the range 33-126 (non-printable
758 * or non-ASCII).
759 */
760 only_ascii_channels = no;
761
762 /* resv_forcepart: force any local users to part a channel
763 * when a RESV is issued.
764 */
765 resv_forcepart = yes;
766
767 /* channel target change: restrict how many channels users can
768 * message per unit of time. IRC operators, channel operators and
769 * voiced users are exempt.
770 */
771 channel_target_change = yes;
772
773 /* disable local channels: if yes, then local channels will not be
774 * supported.
775 */
776 disable_local_channels = no;
777
778 /* autochanmodes: the channel modes that should be automatically set
779 * when a channel is created.
780 */
781 autochanmodes = "+nt";
782
783 /* displayed_usercount: the minimum amount of users on a channel before it
784 * is displayed in LIST. this parameter can be overridden using ELIST parameters,
785 * such as LIST >0.
786 */
787 displayed_usercount = 3;
788
789 /* strip_topic_colors: whether or not color codes in TOPIC should be stripped. */
790 strip_topic_colors = no;
791
792 /* opmod_send_statusmsg: format messages sent to ops due to +z
793 * as PRIVMSG @#channel when sent to clients.
794 */
795 opmod_send_statusmsg = no;
796 };
797
798
799 /* The serverhide block contains the options regarding serverhiding */
800 serverhide {
801 /* flatten links: this option will hide various routing information
802 * and make all servers in /links appear that they are linked to
803 * this server.
804 */
805 flatten_links = no;
806
807 /* links delay: how long to wait before showing splits or new
808 * servers in a flattened /links output.
809 */
810 links_delay = 5 minutes;
811
812 /* hidden: hide this server from a /links output on servers with
813 * flatten_links enabled. this allows hub servers to be hidden etc.
814 */
815 hidden = no;
816
817 /* disable hidden: prevent servers hiding themselves from a
818 * /links ouput.
819 */
820 disable_hidden = no;
821 };
822
823 /* These are the blacklist settings.
824 * You can have multiple combinations of host and rejection reasons.
825 * They are used in pairs of one host/rejection reason.
826 *
827 * These settings should be adequate for most networks.
828 *
829 * Word to the wise: Do not use blacklists like SPEWS for blocking IRC
830 * connections.
831 *
832 * As of charybdis 2.2, you can do some keyword substitution on the rejection
833 * reason. The available keyword substitutions are:
834 *
835 * ${ip} - the user's IP
836 * ${host} - the user's canonical hostname
837 * ${dnsbl-host} - the dnsbl hostname the lookup was done against
838 * ${nick} - the user's nickname
839 * ${network-name} - the name of the network
840 *
841 * As of charybdis 3.4, a type parameter is supported, which specifies the
842 * address families the blacklist supports. IPv4 and IPv6 are supported.
843 * IPv4 is currently the default as few blacklists support IPv6 operation
844 * as of this writing.
845 *
846 * As of charybdis 3.5, a matches parameter is allowed; if omitted, any result
847 * is considered a match. If included, a comma-separated list of *quoted*
848 * strings is allowed to match queries. They may be of the format "0" to "255"
849 * to match the final octet (e.g. 127.0.0.1) or "127.x.y.z" to explicitly match
850 * an A record. The blacklist is only applied if it matches anything in the
851 * list. You may freely mix full IP's and final octets.
852 *
853 * Consult your blacklist provider for the meaning of these parameters; they
854 * are usually used to denote different ban types.
855 */
856 blacklist {
857 host = "rbl.efnetrbl.org";
858 type = ipv4;
859 reject_reason = "${nick}, your IP (${ip}) is listed in EFnet's RBL. For assistance, see http://efnetrbl.org/?i=${ip}";
860
861 /* Example of a blacklist that supports both IPv4 and IPv6 and using matches */
862 # host = "foobl.blacklist.invalid";
863 # matches = "4", "6", "127.0.0.10";
864 # type = ipv4, ipv6;
865 # reject_reason = "${nick}, your IP (${ip}) is listed in ${dnsbl-host} for some reason. In order to protect ${network-name} from abuse, we are not allowing connections listed in ${dnsbl-host} to connect";
866 };
867
868 /* These are the OPM settings.
869 * This is similar to the functionality provided by BOPM. It will scan incoming
870 * connections for open proxies by connecting to clients and attempting several
871 * different open proxy handshakes. If they connect back to us (via a dedicated
872 * listening port), and send back the data we send them, they are considered
873 * an open proxy. For politeness reasons (users may be confused by the incoming
874 * connection attempts if they are logging incoming connections), the user is
875 * notified upon connect if they are being scanned.
876 *
877 * WARNING:
878 * These settings are considered experimental. Only the most common proxy types
879 * are checked for (Charybdis is immune from POST and GET proxies). If you are
880 * not comfortable with experimental code, do not use this feature.
881 */
882 #opm {
883 /* IPv4 address to listen on. This must be a publicly facing IP address
884 * to be effective.
885 * If omitted, it defaults to serverinfo::vhost.
886 */
887 #listen_ipv4 = "127.0.0.1";
888
889 /* IPv4 port to listen on.
890 * This should not be the same as any existing listeners.
891 */
892 #port_v4 = 32000;
893
894 /* IPv6 address to listen on. This must be a publicly facing IP address
895 * to be effective.
896 * If omitted, it defaults to serverinfo::vhost6.
897 */
898 #listen_ipv6 = "::1";
899
900 /* IPv6 port to listen on.
901 * This should not be the same as any existing listeners.
902 */
903 #port_v6 = 32000;
904
905 /* You can also set the listen_port directive which will set both the
906 * IPv4 and IPv6 ports at once.
907 */
908 #listen_port = 32000;
909
910 /* This sets the timeout in seconds before ending open proxy scans.
911 * Values less than 1 or greater than 60 are ignored.
912 * It is advisable to keep it as short as feasible, so clients do not
913 * get held up by excessively long scan times.
914 */
915 #timeout = 5;
916
917 /* These are the ports to scan for SOCKS4 proxies on. They may overlap
918 * with other scan types. Sensible defaults are given below.
919 */
920 #socks4_ports = 80, 443, 1080, 8000, 8080, 10800;
921
922 /* These are the ports to scan for SOCKS5 proxies on. They may overlap
923 * with other scan types. Sensible defaults are given below.
924 */
925 #socks5_ports = 80, 443, 1080, 8000, 8080, 10800;
926
927 /* These are the ports to scan for HTTP CONNECT proxies on (plaintext).
928 * They may overlap with other scan types. Sensible defaults are given
929 * below.
930 */
931 #httpconnect_ports = 80, 8080, 8000;
932
933 /* These are the ports to scan for HTTPS CONNECT proxies on (SSL).
934 * They may overlap with other scan types. Sensible defaults are given
935 * below.
936 */
937 #httpsconnect_ports = 443, 4443;
938 #};
939
940 /*
941 * Alias blocks allow you to define custom commands. (Old m_sshortcut.c)
942 * They send PRIVMSG to the given target. A real command takes
943 * precedence above an alias.
944 */
945 alias "NickServ" {
946 /* the name must go above */
947
948 /* target: the target nick (must be a network service) or
949 * user@server (cannot be this server, only opers can use
950 * user starting with "opers" reliably, interpreted on the target
951 * server only so you may need to use nick@server instead)
952 */
953 target = "NickServ";
954 };
955
956 alias "ChanServ" {
957 target = "ChanServ";
958 };
959
960 alias "OperServ" {
961 target = "OperServ";
962 };
963
964 alias "MemoServ" {
965 target = "MemoServ";
966 };
967
968 alias "NS" {
969 target = "NickServ";
970 };
971
972 alias "CS" {
973 target = "ChanServ";
974 };
975
976 alias "OS" {
977 target = "OperServ";
978 };
979
980 alias "MS" {
981 target = "MemoServ";
982 };
983
984 /* The general block contains many of the options that were once compiled
985 * in options in config.h. The general block is read at start time.
986 */
987 general {
988 /* hide error messages: defines whether error messages from
989 * servers that are not deemed fully safe are hidden or not.
990 * These can sometimes contain IPs and can have an adverse
991 * effect on server ip hiding. Set to:
992 * yes: hide from opers and admin
993 * opers: hide from opers only
994 * no: do not hide error messages
995 * Admins on other servers count as opers.
996 */
997 hide_error_messages = opers;
998
999 /* hide spoof ips: hide the real ips of auth{} spoofed users
1000 * If disabled, local opers can see them.
1001 * Dynamic spoofs (e.g. set by services) are unaffected by this;
1002 * any oper (local and remote) can see the real ip.
1003 */
1004 hide_spoof_ips = yes;
1005
1006 /* default umodes: umodes to set upon connection
1007 * If you have enabled the ip_cloaking extension, and you wish for
1008 * incoming clients to be set +h or +x upon connection, add +h or +x to the umode
1009 * string below.
1010 */
1011 default_umodes = "+i";
1012
1013 /* default operstring: defines the default oper response
1014 * in /whois queries, eg "is an IRC Operator".
1015 * After startup use /quote set operstring to change.
1016 */
1017 default_operstring = "is an IRC Operator";
1018
1019 /* default adminstring: defines the default admin response
1020 * in /whois queries, eg "is a Server Administrator".
1021 * After startup use /quote set adminstring to change.
1022 */
1023 default_adminstring = "is a Server Administrator";
1024
1025 /* servicestring: defines the response for opered services (+S)
1026 * in /whois queries, eg "is a Network Service".
1027 * This is updated on rehash.
1028 */
1029 servicestring = "is a Network Service";
1030
1031 /*
1032 * Nick of the network's SASL agent. Used to check whether services are here,
1033 * SASL credentials are only sent to its server. Needs to be a service.
1034 *
1035 * Defaults to SaslServ if unspecified.
1036 */
1037 sasl_service = "SaslServ";
1038
1039 /* disable fake channels: disable local users joining fake versions
1040 * of channels, eg #foo^B^B. Disables bold, mirc colour, reverse,
1041 * underline and hard space. (ASCII 2, 3, 22, 31, 160 respectively).
1042 */
1043 disable_fake_channels = no;
1044
1045 /* tkline_expire_notices: give a notice to opers when a tkline
1046 * expires
1047 */
1048 tkline_expire_notices = no;
1049
1050 /* floodcount: the default value of floodcount that is configurable
1051 * via /quote set floodcount. This is the amount of lines a user
1052 * may send to any other user/channel in one second.
1053 */
1054 default_floodcount = 10;
1055
1056 /* failed oper notice: send a notice to all opers on the server when
1057 * someone tries to OPER and uses the wrong password, host or ident.
1058 */
1059 failed_oper_notice = yes;
1060
1061 /* dots in ident: the amount of '.' characters permitted in an ident
1062 * reply before the user is rejected.
1063 */
1064 dots_in_ident = 2;
1065
1066 /* min nonwildcard: the minimum non wildcard characters in k/d/g lines
1067 * placed via the server. klines hand placed are exempt from limits.
1068 * wildcard chars: '.' '*' '?' '@'
1069 */
1070 min_nonwildcard = 4;
1071
1072 /* min nonwildcard simple: the minimum non wildcard characters in
1073 * xlines/resvs placed via the server.
1074 * wildcard chars: '*' '?'
1075 */
1076 min_nonwildcard_simple = 3;
1077
1078 /* max accept: maximum allowed /accept's for +g usermode */
1079 max_accept = 20;
1080
1081 /* max monitor: the maximum amount of nicknames a client may have in
1082 * their monitor (server-side notify) list.
1083 */
1084 max_monitor = 100;
1085
1086 /* nick flood: enable the nickflood control code */
1087 anti_nick_flood = yes;
1088
1089 /* nick flood: the nick changes allowed in the specified period */
1090 max_nick_time = 20 seconds;
1091 max_nick_changes = 5;
1092
1093 /* anti spam time: the minimum time a user must be connected before
1094 * custom quit messages are allowed.
1095 */
1096 anti_spam_exit_message_time = 5 minutes;
1097
1098 /* ts delta: the time delta allowed between server clocks before
1099 * a warning is given, or before the link is dropped. all servers
1100 * should run ntpdate/rdate to keep clocks in sync
1101 */
1102 ts_warn_delta = 30 seconds;
1103 ts_max_delta = 5 minutes;
1104
1105 /* client exit: prepend a user's quit message with "Quit: " */
1106 client_exit = yes;
1107
1108 /* collision fnc: change user's nick to their UID instead of
1109 * killing them, if possible. This setting only applies to nick
1110 * collisions detected on this server. Only enable this if
1111 * all servers on the network allow remote nicks to start with
1112 * a digit.
1113 */
1114 collision_fnc = yes;
1115
1116 /* resv fnc: change a user's nick to a nick they have recently used
1117 * (or their UID, if no such nick can be found) when a resv matching
1118 * them is set by services. Only enable this if all servers on the
1119 * network allow remote nicks to start with a digit.
1120 */
1121 resv_fnc = yes;
1122
1123 /* global snotices: send out certain snotices (most +b, +f, +y,
1124 * some +s) to other servers via ENCAP SNOTE. Received SNOTEs are
1125 * displayed unconditionally.
1126 */
1127 global_snotices = yes;
1128
1129 /* dline reason: show the user the dline reason when they connect
1130 * and are dlined.
1131 */
1132 dline_with_reason = yes;
1133
1134 /* kline reason: show the user the reason why they are k/dlined
1135 * on exit. may give away who set k/dline when set via tcm.
1136 */
1137 kline_with_reason = yes;
1138
1139 /* tkline duration: when showing users their k/dline reason (see
1140 * kline_with_reason), don't add "Temporary K-line 123 min."
1141 */
1142 hide_tkdline_duration = no;
1143
1144 /* kline reason: make the users quit message on channels this
1145 * reason instead of the oper's reason.
1146 */
1147 kline_reason = "Connection closed";
1148
1149 /* identify to services via server password
1150 * if auth{} block had no password but the user specified a
1151 * server password anyway, send a PRIVMSG to <identify_service>
1152 * with as text <identify_command> <password>.
1153 */
1154 identify_service = "NickServ@services.int";
1155 identify_command = "IDENTIFY";
1156
1157 /* non redundant klines: flag and ignore redundant klines */
1158 non_redundant_klines = yes;
1159
1160 /* warn no nline: warn opers about servers that try to connect but
1161 * we dont have a connect {} block for. Twits with misconfigured
1162 * servers can get really annoying with this enabled.
1163 */
1164 warn_no_nline = yes;
1165
1166 /* use propagated bans: KLINE, XLINE and RESV set fully propagated bans.
1167 * That means the bans are part of the netburst and restarted/split
1168 * servers will get them, but they will not apply to 3.2 and older
1169 * servers at all.
1170 */
1171 use_propagated_bans = yes;
1172
1173 /* stats e disabled: disable stats e. useful if server ips are
1174 * exempted and you dont want them listing on irc.
1175 */
1176 stats_e_disabled = no;
1177
1178 /* stats c oper only: make stats c (connect {}) oper only */
1179 stats_c_oper_only = no;
1180
1181 /* stats y oper only: make stats y (class {}) oper only */
1182 stats_y_oper_only = no;
1183
1184 /* stats o oper only: make stats o (opers) oper only */
1185 stats_o_oper_only = yes;
1186
1187 /* stats P oper only: make stats P (ports) oper only
1188 * NOTE: users doing stats P will never be given the ips that the
1189 * server listens on, simply the ports.
1190 */
1191 stats_P_oper_only = no;
1192
1193 /* stats i oper only: make stats i (auth {}) oper only. set to:
1194 * yes: show users no auth blocks, made oper only.
1195 * masked: show users first matching auth block
1196 * no: show users all auth blocks.
1197 */
1198 stats_i_oper_only = masked;
1199
1200 /* stats k/K oper only: make stats k/K (klines) oper only. set to:
1201 * yes: show users no auth blocks, made oper only
1202 * masked: show users first matching auth block
1203 * no: show users all auth blocks.
1204 */
1205 stats_k_oper_only = masked;
1206
1207 /* stats l/L oper only:
1208 * yes: non-opers can't use this at all
1209 * self: non-opers see only themselves
1210 * no: show targeted users or non-hidden opers to everyone
1211 */
1212 stats_l_oper_only = self;
1213
1214 /* map oper only: make /map oper only */
1215 map_oper_only = no;
1216
1217 /* operspy admin only: make operspy notices to +Z admin only */
1218 operspy_admin_only = no;
1219
1220 /* operspy dont care user info: treat /who mask as if there was
1221 * an '!' always; do not log or server notice about operspy
1222 * /who mask, /masktrace and /scan. channel information is still
1223 * protected. */
1224 operspy_dont_care_user_info = no;
1225
1226 /* caller id wait: time between notifying a +g user that somebody
1227 * is messaging them.
1228 */
1229 caller_id_wait = 1 minute;
1230
1231 /* pace wait simple: time between use of less intensive commands
1232 * (HELP, remote WHOIS, WHOWAS)
1233 */
1234 pace_wait_simple = 1 second;
1235
1236 /* pace wait: time between more intensive commands
1237 * (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION)
1238 */
1239 pace_wait = 10 seconds;
1240
1241 /* short motd: send clients a notice telling them to read the motd
1242 * instead of forcing a motd to clients who may simply ignore it.
1243 */
1244 short_motd = no;
1245
1246 /* ping cookies: require clients to respond exactly to a ping command,
1247 * can help block certain types of drones and FTP PASV mode spoofing.
1248 */
1249 ping_cookie = no;
1250
1251 /* connect timeout: sets how long we should wait for a connection
1252 * request to succeed
1253 */
1254 connect_timeout = 30 seconds;
1255
1256 /* ident timeout: Amount of time (in seconds) that the IRCd will
1257 * wait for a user to respond to an ident request.
1258 */
1259 default_ident_timeout = 5;
1260
1261 /* disable auth: disables identd checking */
1262 disable_auth = no;
1263
1264 /* no oper flood: increase flood limits for opers. */
1265 no_oper_flood = yes;
1266
1267 /* REMOVE ME. The following line checks you've been reading. */
1268 havent_read_conf = yes;
1269
1270 /* max targets: the maximum amount of targets in a single
1271 * PRIVMSG/NOTICE. set to 999 NOT 0 for unlimited.
1272 */
1273 max_targets = 4;
1274
1275 /* post-registration delay: wait this long before processing commands from a newly
1276 * registered user. Used to allow network utility bots to perform any actions
1277 * (such as host changes or proxy scanning) before the user can join channels.
1278 */
1279 post_registration_delay = 2 seconds;
1280
1281 /* use_whois_actually: send clients requesting a whois a numeric
1282 * giving the real IP of non-spoofed clients to prevent DNS abuse.
1283 */
1284 use_whois_actually = yes;
1285
1286 /* usermodes configurable: a list of usermodes for the options below
1287 *
1288 * +g - callerid - Server-side private message allow list
1289 * +D - deaf - Don't see channel messages
1290 * +i - invisible - Not shown in NAMES or WHO unless you share a
1291 * a channel
1292 * +l - locops - See LOCOPS messages
1293 * +Q - noforward - Unaffected by channel forwarding
1294 * +R - regonlymsg - No messages from unindentified
1295 * +s - servnotice - See server notices
1296 * +w - wallop - See oper and server generated WALLOPS
1297 * +z - operwall - See operwalls
1298 */
1299
1300 /* oper only umodes: usermodes only opers may set */
1301 oper_only_umodes = operwall, locops, servnotice;
1302
1303 /* oper umodes: default usermodes opers get when they /oper */
1304 oper_umodes = locops, servnotice, operwall, wallop;
1305
1306 /* oper snomask: default snomask opers get when they /oper,
1307 * provided they have umode +s set */
1308 oper_snomask = "+s";
1309
1310 /* compression level: level of compression for compressed links between
1311 * servers.
1312 *
1313 * values are between: 1 (least compression, fastest)
1314 * and: 9 (most compression, slowest).
1315 */
1316 #compression_level = 6;
1317
1318 /* burst_away: This enables bursting away messages to servers.
1319 * With this disabled, we will only propogate AWAY messages
1320 * as users send them, but never burst them. Be warned though
1321 * enabling this could increase the size of a burst significantly
1322 * for a large network, like EFnet.
1323 */
1324 burst_away = yes;
1325
1326 /* nick delay: This locks nicks of split clients for the given time
1327 * or until a remote client uses the nick. This significantly
1328 * reduces nick collisions on short splits but it can be annoying.
1329 * To make things as fair as possible, this should be the same on
1330 * all servers. If you enable this, the suggested value is 15 minutes.
1331 */
1332 nick_delay = 0 seconds;
1333
1334 /* reject time: the amount of rejections through klines/dlines etc
1335 * allowed in the given time before the rejection is cached and
1336 * a pseudo temp dline is placed
1337 */
1338 reject_ban_time = 1 minute;
1339 reject_after_count = 3;
1340
1341 /* reject duration: the amount of time to cache the rejection */
1342 reject_duration = 5 minutes;
1343
1344 /* throttle_duration: Amount of time that throttling will be applied to an IP
1345 * address.
1346 */
1347 throttle_duration = 60;
1348
1349 /* throttle_count: Number of connections within throttle_duration that it takes
1350 * for throttling to take effect */
1351 throttle_count = 4;
1352
1353 /* client flood_max_lines: maximum number of lines in a clients queue before
1354 * they are dropped for flooding.
1355 */
1356 client_flood_max_lines = 20;
1357
1358 /* Flood control settings. DO NOT CHANGE THESE without extensive discussion
1359 * and testing by someone who knows exactly what they do.
1360 *
1361 * These settings replicate charybdis-3.3 behaviour.
1362 */
1363 client_flood_burst_rate = 40;
1364 client_flood_burst_max = 5;
1365 client_flood_message_time = 1;
1366 client_flood_message_num = 2;
1367
1368 /* max_ratelimit_tokens: the maximum number of ratelimit tokens that one
1369 * user can accumulate. This attempts to limit the amount of outbound
1370 * bandwidth one user can consume. Do not change unless you know what
1371 * you're doing.
1372 */
1373 max_ratelimit_tokens = 30;
1374
1375 /* away_interval: the minimum interval between AWAY commands. One
1376 * additional AWAY command is allowed, and only marking as away
1377 * counts.
1378 */
1379 away_interval = 30;
1380
1381 /* certfp_method: the method that should be used for computing certificate fingerprints.
1382 * Acceptable options are sha1, sha256, spki_sha256, sha512 and spki_sha512. Networks
1383 * running versions of charybdis prior to charybdis 3.5 MUST use sha1 for certfp_method.
1384 *
1385 * The spki_* variants operate on the SubjectPublicKeyInfo of the certificate, which does
1386 * not change unless the private key is changed. This allows the fingerprint to stay
1387 * constant even if the certificate is reissued. These fingerprints will be prefixed with
1388 * "SPKI:SHA2-256:" or "SPKI:SHA2-512:" depending on the hash type. These fingerprints
1389 * are not supported on servers running charybdis 3.5.3 or earlier.
1390 *
1391 * To generate a fingerprint from a certificate file, please use the mkfingerprint utility
1392 * program located in the bin/ subdirectory of your IRCd installation. Running it with no
1393 * arguments will give you a brief usage message; it takes method and filename arguments.
1394 */
1395 certfp_method = spki_sha256;
1396
1397 /* hide_opers_in_whois: if set to YES, then oper status will be hidden in /WHOIS output. */
1398 hide_opers_in_whois = no;
1399
1400 /* tls_ciphers_oper_only: show the TLS cipher string in /WHOIS only to opers and self */
1401 tls_ciphers_oper_only = no;
1402
1403 /* hidden_caps: client capabilities we'll pretend we don't support until they're requested */
1404 #hidden_caps = "userhost-in-names";
1405 };
1406
1407 modules {
1408 /* module path: paths to search for modules specified below and
1409 * in /modload.
1410 */
1411 path = "/usr/local/ircd/modules";
1412 path = "/usr/local/ircd/modules/autoload";
1413
1414 /* module: the name of a module to load on startup/rehash */
1415 #module = "some_module";
1416 };