*/
"uplinks" {
// This first entry connects to an ircd on teh same server an X3..
- "Hub" { // This can be any string, just used here for your conveniance
+ "Hub" { // This can be any string, just used here for your convenience
"address" "127.0.0.1"; // The IP address of the server
"port" "8888"; // What TCP port to connect to
"password" "laoo,rpe"; // Both of these passwords must match
* things like bans, where it should not show the user's real hostname. */
"hidden_host_type" "1"; // change this to 2 if you use Nefarious's style 2 host hiding.
"key1" "45432"; // Set these key values to the network KEY values you use
- "key2" "76934"; // for host hiding style 2.
- "key3" "98336";
+ "key2" "76934"; // for host hiding style 2. If you are using Nefarious 1.3.0 (type 8)
+ "key3" "98336"; // then these are ignored.
+ "prefix" "AfterNET"; // If you use style 2 then this is the name that is prefixed to hosts.
"numeric" "51"; // hint: If you get collisions on link, CHANGE THIS.
- /* Type handles some changes in nefarious 1.0 (was 0.5.0)
+ /* Type handles some changes in Nefarious from version to version.
* 4 - nefarious 0.4.x and other ircds
- * 5 - nefarious 1.0.x and higher (Branch Revision)
- * 6 - nefarious 1.0.x and higher (Trunk Revision)
+ * 5 - nefarious 1.0.x and higher (Obselete)
+ * 6 - nefarious 1.1.0 and higher (Obselete)
+ * 7 - nefarious 1.2.0 and higher (Branch Revsion)
+ * 8 - nefarious 1.3.0 and higher (Trunk Revsions)
*/
- "type" "5";
+ "type" "8";
"host_in_topic" "1"; //Set to 1 if your Nefarious server have the HOST_IN_TOPIC F:line set to TRUE.
"max_users" "256"; // You can save a little memory by setting this to a lower value.
"force_n2k" "1"; // Use extended (5-digit) numnick for self, even if 3 are possible.
// how long until an account with no access to any channels expires?
"nochan_account_expire_delay" "365d";
+ // how long must an account be inactive so it can be ounregistered without force?
+ "ounregister_inactive" "1M";
+
+ // which flags on an account require the ounregister to be used with force?
+ "ounregister_flags" "ShgsfnHbu";
+
// If somebody keeps guessing passwords incorrectly, do we gag them?
"autogag_enabled" "1";
"autogag_duration" "30m";
//"ldap_field_account" "uid";
//"ldap_field_password" "userPassword";
//"ldap_field_email" "mail";
+ //"ldap_field_oslevel" "X3AccountLevel";
+ //// NOTE: X3AccountLevel is a custom LDAP attribute
+ //// that LDAP servers will not know by default. A custom
+ //// schema is required to provide it.
//// This bit is needed if you want to put ircops into a group:
//"ldap_oper_group_dn" "cn=Opers,ou=Groups,dc=afternet,dc=org";
+ //"ldap_oper_group_level" "99"; // must be above this level to be added to oper ldap group
//"ldap_field_group_member" "memberUid"; // what field group members are in
//"ldap_timeout" "10"; // seconds
// 1 = use a registered channel mode, have services op themselves
// 2 = all of the above, and a channel setting to have ChanServ not
// idle in the channel
- // NOTE: +z mode, needed for this to work, is inharently flawed and
- // will cause desynch, so don't use it IMO -Rubin.
+ // NOTE: +z mode, needed for this to work. X3 contains modifications to
+ // try and prevent desynchs. If you use this mode do not use any other service
+ // that uses this mode.
"off_channel" "no";
// Infolines are sent when channel users join the channel. Users set them with USET INFO in X3.
// How long is a channel unvisited (by masters or above) before it can be expired?
"chan_expire_delay" "30d";
+ // How often to look for dnrs that have expired?
+ "dnr_expire_freq" "1h";
+
// what !set options should we show when user calls "!set" with no arguments?
"set_shows" ("DefaultTopic", "TopicMask", "Greeting", "UserGreeting", "Modes", "PubCmd", "InviteMe", "UserInfo", "EnfOps", "EnfModes", "EnfTopic", "TopicSnarf", "Setters", "CtcpReaction", "BanTimeout", "Protect", "Toys", "DynLimit", "NoDelete");
"No.",
"Maybe.");
+ // This is a list of wheel-of-misfortune results. Remove them to disable.
+ // You must make sure your ircd supports, and has enabled, the features needed
+ // for these.
+ "wheel" (
+ "peer",
+ // "partall", // needs svspart
+ "gline",
+ // "shun", // needs shun
+ "nothing",
+ // "randjoin", // needs svsjoin and svspart
+ // "abusewhois", // needs epitaph in /whois support
+ "kickall",
+ // "nickchange", // needs svsnick
+ "kill",
+ "svsignore",
+ "kickbanall" );
+
// channel(s) that support helpers must be in to be helping
// if this is a list, any one by itself will do
"support_channel" ("#Operations", "#Help");
// when does god mode time out?
"god_timeout" "30m";
+
+ // What should valid registered channels look like?
+ // Be very carefull changing these. This default is
+ // basically limited to letters, numbers, dash and underscore.
+ "valid_channel_regex" "^#[-_a-z][-_a-z0-9]*$";
};
/* Global is a service bot that can send out network-wide messages for you. I
"max_read" "1024"; // don't read more than 1024 bytes from any client
"gline_duration" "1d"; // issue G-lines lasting one hour
"max_cache_age" "60"; // only cache results for 60 seconds
- "address" "192.168.1.10"; // do proxy tests from this address
+ "bind_address" "192.168.0.10"; // do proxy tests from this address
};
/* Snoop sends connect, quit, join, and part messages for every user
* on the network, and helps in finding drones. Put it somewhere secure
// to 0 to disable message expiration
"limit" "30"; // Max amount of messages a person can get.
};
+ "qserver" {
+ "bind_address" "127.0.0.1";
+ "port" "7702";
+ "password" "hello";
+ };
+ "blacklist" {
+ // File containing blacklisted client addresses.
+ // "file" "blacklist.txt";
+ // Each line in the file should start with an IP or hostname.
+ // If there is whitespace and a message after that, the
+ // message will override this one:
+ "file_reason" "client is blacklisted";
+ // How long should a blacklist G-line last?
+ "gline_duration" "1h";
+ // If you want to use DNS blacklists, add them here:
+ "dnsbl" {
+ // This DNSBL zone does not exist - you'll have to pick your own.
+ "dnsbl.example.org" {
+ "description" "Example DNSBL entry";
+ "reason" "busted by a dns blacklist";
+ "duration" "1h";
+ // You can stick the client's IP in the G-line message.
+ "reason_2" "Example DNSBL reported %ip%'s address as 127.0.0.2";
+ // .. or the contents of a DNS TXT.
+ "reason_3" "%txt%";
+ };
+ };
+ };
+ "sar" {
+ // You generally will not want to override these defaults.
+ // "resolv_conf" "/etc/resolv.conf";
+ // "services" "/etc/services";
+ // "bind_address" "0.0.0.0";
+ // "bind_port" "0";
+ // The defaults for these are derived from the system config files (above).
+ // "domain" "example.org";
+ // "timeout" "3"; // base timeout for a DNS reply
+ // "retries" "3"; // number of times to retry on different servers or longer timeouts
+ // "ndots" "1"; // number of dots needed in a hostname to bypass search path
+ // "edns0" "0"; // if set, enable EDNS0 extended message sizes
+ // "search" ("example.org", "example.net");
+ // "nameservers" ("127.0.0.1");
+ };
/* WebTV allows webtv clients to use common IRC commands.
*/
"webtv" {
"body_prefix" ("AfterNET Support - User and Channel registration system");
"body_suffix_first" ("", "AfterNET IRC Network", "http://www.afternet.org");
"body_suffix" ("", "AfterNET IRC Network", "http://www.afternet.org", "support@afternet.org","irc://irc.afternet.org/afternet");
+ // If you are using the smtp mail back-end, you may need to set these:
+ "smtp_server" "localhost";
+ "smtp_service" "smtp";
+ // "smtp_myname" "localhost.domain";
};
/* DBS (Databases) *************************************************
projects / irc / evilnet / x3.git / blobdiff