/***********************************************************************
X3 ChangeLog
+2006-07-11 Alex Schumann <rubin@afternet.org>
+
+ * src/modcmd.c: if pubcmd is set higher than your level, only respond
+ with the denied msg if the command was actually found. this closes bug
+ number 1509382.
+
+2006-07-10 Alex Schumann <rubin@afternet.org>
+
+ * src/chanserv.c: fixed crash bug trying to deref the handleinfo of a
+ non-logged-in user (null pointer)
+
+2006-07-09 Alex Schumann <rubin@afternet.org>
+
+ * src/nickserv.c: fixed bug where unignores were getting sent to the
+ user multiple times, instead of to each online nick once.
+
+2006-07-09 Alex Schumann <rubin@afternet.org>
+
+ * src/nickserv.c: Fixes for addignore/delignore corruption +missed a
+ spot. Ugh, messed up the fix. Trying again :)
+
+2006-07-10 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/chanserv.c: INVITE now checks the targets ignore/silence list.
+ If the target is ignoring the person inviting them then the invite
+ is denied.
+
+2006-07-07 Alex Schumann <rubin@afternet.org>
+
+ * src/mod-memoserv.c: pLaYa reported a crash/corruption bug in
+ memoserv most easily seen when sending short memos. Rewrote the flag
+ handling part of memo send to correct it.
+
+2006-07-05 Alex Schumann <rubin@afternet.org>
+
+ * src/helpfile.c: pLaYa pointed out the table code row count is off by
+ one. Fixed.
+
+2006-06-27 Neil Spierling <sirvulcan@gmail.com>
+
+ * configure: Regenerated.
+
+ * configure.in: Make use of TRE regexp library. Its more powerful
+ than the standard library (http://laurikari.net/tre/index.html).
+ Im also pondering adding services side regexp bans, X3 would
+ probably required a channel flag called say advanced that can
+ only be set by the owner. If enabled then regexp bans can be
+ used. I also added an output saying what modules are enabled,
+ what protocol is enabled, what malloc is choosen and if debugging
+ is enabled. Just a bit of a message as the user will of seen
+ programs just finish compiling and he/she/it may think it
+ was X3 compiling, but it was just TRE compiling. They still need
+ to compile X3.
+
+ * src/config.h.in: Regenerated.
+
+ * src/Makefile.am: Tweak for TRE.
+
+ * src/Makefile.in: Regenerated.
+
+ * src/nickserv.c: Use the new regex.h Im sure -I includes get
+ called before system includes like /usr/include.
+
+ * src/opserv.c: Use the new regex.h Im sure -I includes get
+ called before system includes like /usr/include.
+
+ * src/tools/tre.tar.gz: TRE 0.7.4. Configure will untar and
+ compile this just before configure finishes up. Sits around
+ 470KB, rather than another 2.5MB if i TRE untarred. I suppose
+ i could get it down a bit more using Bzip but there are some
+ boxes out there still without bzip.
+
+2006-06-25 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Better history implementation. A seperate
+ table is used for history entries. Entries contain the same
+ fields as the memo table except for the message, read, and flags.
+ Entries are only removed from the history db when they get
+ expired by do_expire (older than message_expire). Also fixed
+ up a issue with STATUS. On AfterNET we were getting huge large
+ for the amount of memos. I now realise it was reading the amount
+ of users. It now reads the proper amount of memos. I also a count
+ for history entries.
+
+ * src/mod-memoserv.help: EXPIRE handles history and memos now.
+
+2006-06-25 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Make use of ignore lists when trying to
+ send memos.
+
+2006-06-25 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/spamserv.c: Crash fix (finally). Been meaning to do this
+ for a while now.
+
+2006-06-23 Alex Schumann <rubin@afternet.org>
+
+ * src/modcmd.help, src/opserv.help, src/helpfile.c, src/helpfile.h,
+ src/modcmd.c, src/nickserv.c: Improvements to
+ table output and help display.
+
+ * src/mod-memoserv.c: fix segfault
+
+2006-06-23 Alex Schumann <rubin@afternet.org>
+
+ * src/chanserv.c: Backing out the bantype patch because it sucks _bad_.
+ fix it and re-apply if you want it..
+
+ * src/chanserv.h: Backing out the bantype patch.
+
+ * src/chanserv.help: Backing out the bantype patch.
+
+2006-06-20 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Fixed a bug.
+
+2006-06-20 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Added basic HISTORY command. At the moment
+ if the recipient deletes the memo it will not be listed in the
+ HISTORY list.
+
+ * src/mod-memoserv.help: HISTORY entry.
+
+2006-06-20 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Added new flags, see below.
+
+ * src/mod-memoserv.help: Opps forgot the read reciept stuff. Also
+ added flags for always ignoring read reciepts and always sending
+ read reciepts.
+
+2006-06-20 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Added CANCEL command for cancelling memos
+ that you have sent, aslong as they have not been read yet.
+
+ * src/mod-memoserv.help: CANCEL entry plus tweaked some read
+ recipient to read reciept stuff.
+
+2006-06-20 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Redid the db stuff, it now writes users
+ settings and memos to the memoserv database.
+
+2006-06-20 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Small bug fix.
+
+2006-06-20 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Added read recipient support via SEND using
+ -r as a flag. Messages with requested read recipients have a (r)
+ shown beside the sender nick in LIST. People can ignore a read
+ recipient using -i when reading the message via READ. Its all
+ in the help file.
+
+ * src/mod-memoserv.help: Added read recipient relevent bits.
+
+ * src/opserv.help: Added halfopping functions.
+
+2006-06-19 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/x3.conf.example: Forgot a ;.
+
+2006-06-19 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Make use of SET LIMIT.
+
+2006-06-19 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: Fixed SET bugs and renabled LIMIT now.
+
+2006-06-19 Neil Spierling <sirvulcan@gmail.com>
+
+ * src/mod-memoserv.c: On Second thoughts dont enable LIMIT now.
+
+2006-06-19 Neil Spierling <sirvulcan@gmail.com>
+
+ * x3.conf.example: Max limit for Memoserv LIMIT option.
+
+ * src/hash.h: Fixed halfops issue.
+
+ * src/mod-memoserv.c: Added SET LIMIT option for the maximum
+ amount of memos you can have. This does not do anything yet as
+ im committing the half ops fix now. This code is fine it just
+ allows you to adjust the limit for now.
+
+2006-06-12 Neil Spierling <sirvulcan@gmail.com>
+
+ * x3.conf.example: Commented out SpamServ module as there are bugs
+ and i cant give a definate date as to when i can fix it. Im not
+ home much these days.
+
+ * src/mod-memoserv.c: Redid the SET code using some whatnet code
+ by wasted. Tweaked here and there. Also added some formatting in
+ LIST and SET like chanserv SET. Oh and MemoServ will join
+ autojoin_channels if MemoServ is in a seperate nickname.
+
+ * src/mod-memoserv.help: Added OSET and done some tweaking.
+
+ * src/nickserv.c: Allow the use of get_victim_oper outside of
+ nickserv.c.
+
+ * src/nickserv.h: Allow the use of get_victim_oper outside of
+ nickserv.c.
+
+2006-06-07 Alex Schumann <rubin@afternet.org>
+
+ * src/chanserv.help: Added a couple set helps that were missing.
+
+ * src/helpfile.c: fix missing space in multi-column table output such
+ as /msg opserv commands * (with nickserv tablewidth setting >60)
+
2006-06-06 Alex Schumann <rubin@afternet.org>
- * src/opserv.c: Change how addalert silence works, so tha its a
- paramiter instead of an action, and also works with trace now.
+ * src/opserv.c: Change how addalert silence works, so that its a
+ parameter instead of an action, and also works with trace now.
+
* x3.conf.example: Added a config setting of level needed to use
'silent yes' in trace/addalert.
projects / irc / evilnet / x3.git / blobdiff