*/
"uplinks" {
// This first entry connects to an ircd on teh same server an X3..
- "Hub" { // This can be any string, just used here for your conveniance
+ "Hub" { // This can be any string, just used here for your convenience
"address" "127.0.0.1"; // The IP address of the server
"port" "8888"; // What TCP port to connect to
"password" "laoo,rpe"; // Both of these passwords must match
"key1" "45432"; // Set these key values to the network KEY values you use
"key2" "76934"; // for host hiding style 2.
"key3" "98336";
+ "prefix" "AfterNET"; // If you use style 2 then this is the name that is prefixed to hosts.
"numeric" "51"; // hint: If you get collisions on link, CHANGE THIS.
/* Type handles some changes in nefarious 1.0 (was 0.5.0)
* 4 - nefarious 0.4.x and other ircds
- * 5 - nefarious 1.0.x and higher (Branch Revision)
- * 6 - nefarious 1.0.x and higher (Trunk Revision)
+ * 5 - nefarious 1.0.x and higher (Obselete)
+ * 6 - nefarious 1.1.0 and higher (Branch Revision)
+ * 7 - nefarious 1.2.0 and higher (Trunk Revsions)
*/
- "type" "5";
+ "type" "6";
"host_in_topic" "1"; //Set to 1 if your Nefarious server have the HOST_IN_TOPIC F:line set to TRUE.
"max_users" "256"; // You can save a little memory by setting this to a lower value.
"force_n2k" "1"; // Use extended (5-digit) numnick for self, even if 3 are possible.
// Whats a valid hostname look like for fakehosts?
"valid_fakehost_regex" "^[-_a-zA-Z0-9.]+$";
+ // Force account names to lowercase? 1=yes 0=no
+ // WARNING: this will convert when reading them from the db, too.
+ "force_handles_lowercase" "0";
+
// "Nickserv" networks, set this to 0. "Authserv" networks,
// set it to 1.
"disable_nicks" "1";
"lc_h" "800"; // support helper (lower case h)
"uc_H" "800"; // net helper (upper case H)
"S" "999"; // O3 access suspended
- "b" "1"; // Bot (not sure what it does tho)
+ "b" "1"; // Bot (Hidden from !staff etc)
};
// and for who can change epithets for staff
// Nickserv 'style' setting affects .userlist and other outputs.
"default_style" "n"; // can be: n = normal, c = clean, or a = advanced.
+
+
+ // LDAP configuration(s)
+ // THIS IS EXPERIMENTAL! DO NOT USE IT IF YOU ARNT'T A DEVELOPER!!
+ // LDAP stands for light directory access protocol. its what many larger orgs use for central user/password management. Its also the core technology behind windows active directory.
+ // If you have an ldap server, you can configure X3 to use it instead of saving passwords locally.
+
+ //"ldap_enable" "0";
+ //"ldap_uri" "ldaps://ldap.yournetwork.server:636";
+ //"ldap_base" "ou=Users,dc=afternet,dc=org";
+ //"ldap_dn_fmt" "uid=%s,ou=Users,dc=afternet,dc=org";
+ //"ldap_autocreate" "1"; // automatically create accounts if they exist in ldap but not x3
+ //// If you will be allowing users to register on IRC you need these:
+ //"ldap_admin_dn" "cn=Admin,dc=afternet,dc=org";
+ //"ldap_admin_pass" "xxxxxxxxxxx";
+ //"ldap_object_classes" ( "top", "inetOrgAnonAccount" );
+ //// NOTE: inetOrgAnon is something I made up. its schema
+ //// can be found in the tools/ directory. ldap servers wont
+ //// know what that is by default.
+ //// These configure what I store, and where.
+ //"ldap_field_account" "uid";
+ //"ldap_field_password" "userPassword";
+ //"ldap_field_email" "mail";
+ //// This bit is needed if you want to put ircops into a group:
+ //"ldap_oper_group_dn" "cn=Opers,ou=Groups,dc=afternet,dc=org";
+ //"ldap_oper_group_level" "99"; // must be above this level to be added to oper ldap group
+ //"ldap_field_group_member" "memberUid"; // what field group members are in
+ //"ldap_timeout" "10"; // seconds
+
};
/*
// 1 = use a registered channel mode, have services op themselves
// 2 = all of the above, and a channel setting to have ChanServ not
// idle in the channel
- // NOTE: +z mode, needed for this to work, is inharently flawed and
- // will cause desynch, so don't use it IMO -Rubin.
+ // NOTE: +z mode, needed for this to work. X3 contains modifications to
+ // try and prevent desynchs. If you use this mode do not use any other service
+ // that uses this mode.
"off_channel" "no";
// Infolines are sent when channel users join the channel. Users set them with USET INFO in X3.
// maximum bans on a channel banlist
"max_chan_bans" "512";
// maximum length of a user's infoline
- "max_userinfo_length" "400"; // for god sake lower this. 80 seems good.
+ "max_userinfo_length" "400"; // hard limit for infolines. This is also the default value.
// If SET DynLimit is on and there are N users in the channel, ChanServ will
// try to keep the limit at N+<adjust_threshold>. This makes the channel
"No.",
"Maybe.");
+ // This is a list of wheel-of-misfortune results. Remove them to disable.
+ // You must make sure your ircd supports, and has enabled, the features needed
+ // for these.
+ "wheel" (
+ "peer",
+ // "partall", // needs svspart
+ "gline",
+ // "shun", // needs shun
+ "nothing",
+ // "randjoin", // needs svsjoin and svspart
+ // "abusewhois", // needs epitaph in /whois support
+ "kickall",
+ // "nickchange", // needs svsnick
+ "kill",
+ "svsignore",
+ "kickbanall" );
+
// channel(s) that support helpers must be in to be helping
// if this is a list, any one by itself will do
"support_channel" ("#Operations", "#Help");
// when does god mode time out?
"god_timeout" "30m";
+
+ // What should valid registered channels look like?
+ // Be very carefull changing these. This default is
+ // basically limited to letters, numbers, dash and underscore.
+ "valid_channel_regex" "#^[-_a-z][-_a-z0-9]*$";
};
/* Global is a service bot that can send out network-wide messages for you. I
// How long should a helpserv be inactive (no requests assigned)
// before it can be unregistered by the expire command?
"expiration" "60d";
+
+ // If a user prefix's this before their helpserv commands then instead
+ // of a request being opened, they will be able to use helpserv commands.
+ "user_escape" "@";
};
/* SockCheck reads sockcheck.conf and can do configurable scans
* to probe for open relays in an attempt to stop drones from using
// to 0 to disable message expiration
"limit" "30"; // Max amount of messages a person can get.
};
+ /* WebTV allows webtv clients to use common IRC commands.
+ */
+ "webtv" {
+ "bot" "IRC";
+ "modes" "+k";
+
+ // Should clients need to be marked to use this service?
+ "required_mark" "1";
+ // which marks are valid webtv marks?
+ "valid_marks" ("webtv", "msntv", "msntv2");
+ };
};
"policers" {
projects / irc / evilnet / x3.git / blobdiff