dnl Process this file with autoconf to create a configure script. dnl General initialization. AC_REVISION([$Id$]) AC_PREREQ(2.61) AC_INIT([X3],[1.7],[evilnet-devel@lists.sourceforge.net]) CODENAME=X3 AC_CONFIG_HEADERS(src/config.h) AC_CONFIG_SRCDIR(src/opserv.c) dnl AM_CANONICAL_TARGET must be before AM_INIT_AUTOMAKE() or autoconf whines AC_CANONICAL_TARGET AM_INIT_AUTOMAKE([gnu 1.6]) AM_MAINTAINER_MODE dnl Compiler/runtime feature checks. AC_TYPE_SIGNAL AC_C_CONST dnl "const" *should* be in the -Werror section, but that breaks Linux. gg gcc. dnl Checks for programs. AC_PROG_AWK AC_PROG_CC AC_PROG_INSTALL AC_PATH_PROG(CP, cp) AC_PROG_RANLIB dnl AC_PROG_LIBTOOL AC_PROG_LN_S AC_PROG_MAKE_SET AC_PROG_GCC_TRADITIONAL AC_CHECK_PROG(MAKER, gmake, gmake, make) dnl nice that unixes can all follow a standard. case $target in *-freebsd2* | *-freebsdelf2* | *-freebsd*out3*) ANSI_SRC="" ;; *-freebsd3* | *-freebsdelf3* | *-freebsd*out3*) ANSI_SRC="" ;; *-solaris*) EXTRA_DEFINE="-D__SOLARIS__" ANSI_SRC="-fno-builtin" ;; *-cygwin) ANSI_SRC="-fno-builtin" ;; *-linux*) dnl -D_GNU_SOURCE needed for strsignal() EXTRA_DEFINE="-D_GNU_SOURCE" ANSI_SRC="" ;; *) ANSI_SRC="" ;; esac CFLAGS="$CFLAGS $EXTRA_DEFINE" dnl Checks for libraries. AC_CHECK_LIB(socket, socket) AC_CHECK_LIB(nsl, gethostbyname) AC_CHECK_LIB(m, main) AC_CHECK_LIB(GeoIP, GeoIP_open) dnl Checks for header files. AC_HEADER_STDC dnl will be used for portability stuff AC_HEADER_TIME AC_STRUCT_TM dnl Would rather not bail on headers, BSD has alot of the functions elsewhere. -Jedi AC_CHECK_HEADERS(GeoIP.h GeoIPCity.h arpa/inet.h fcntl.h math.h tgmath.h malloc.h netdb.h netinet/in.h sys/resource.h sys/timeb.h sys/times.h sys/param.h sys/socket.h sys/time.h sys/types.h sys/wait.h unistd.h getopt.h memory.h arpa/inet.h sys/mman.h sys/stat.h dirent.h sys/epoll.h sys/event.h,,) dnl portability stuff, hurray! -Jedi AC_CHECK_MEMBER([struct sockaddr.sa_len], [AC_DEFINE([HAVE_SOCKADDR_SA_LEN],[1],[Define if struct sockaddr has sa_len field])], [],[#include #include ]) AC_CHECK_MEMBER([struct addrinfo.ai_flags], [AC_DEFINE([HAVE_STRUCT_ADDRINFO],[1],[Define if struct addrinfo declared])], [],[#include #include #include ]) dnl We have fallbacks in case these are missing, so just check for them. AC_CHECK_FUNCS(freeaddrinfo getaddrinfo gai_strerror getnameinfo getpagesize memcpy memset strdup strerror strsignal localtime_r setrlimit getopt getopt_long regcomp regexec regfree sysconf inet_aton epoll_create kqueue kevent select gettimeofday times GetProcessTimes mprotect,,) dnl Check for the fallbacks for functions missing above. if test $ac_cv_func_gettimeofday = no; then AC_CHECK_FUNCS(ftime,,AC_MSG_ERROR([ftime or gettimeofday required. X3 build will fail.])) fi dnl Check for absolutely required library functions. AC_CHECK_FUNCS(socket strcspn strspn strtod strtoul,,AC_MSG_ERROR([a required function was not found. X3 build will fail.])) dnl Check for functions (and how to get them). AC_FUNC_ALLOCA AC_FUNC_MMAP AC_CACHE_CHECK([for sin_len], ac_cv_sin_len, [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include #include ],[struct sockaddr_in *sin; sin->sin_len = 0;])], ac_cv_sin_len="yes", ac_cv_sin_len="no")]) if test $ac_cv_sin_len = yes ; then AC_DEFINE(HAVE_SIN_LEN, 1, [Define if struct sockaddr_in contains a sin_len field]) fi dnl Check for socklen_t. In traditional BSD this is an int, but some dnl OSes use a different type. Test until we find something that will dnl work properly. Test borrowed from a patch submitted for Python. AC_CHECK_TYPE([socklen_t], ,[ AC_MSG_CHECKING([for socklen_t equivalent]) AC_CACHE_VAL([curl_cv_socklen_t_equiv], [ dnl Systems have either "struct sockaddr*" or "void*" as second dnl arg to getpeername. curl_cv_socklen_t_equiv= for arg2 in "struct sockaddr" void ; do for t in int size_t unsigned long "unsigned long" ; do AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include int getpeername (int $arg2 *, $t *);]], [[$t len; getpeername(0, 0, &len);]])],[curl_cv_socklen_t_equiv="$t" break],[]) done done ]) AC_MSG_RESULT($curl_cv_socklen_t_equiv) AC_DEFINE_UNQUOTED(socklen_t, $curl_cv_socklen_t_equiv, [type to use in place of socklen_t if not defined])], [#include #include]) dnl Can only check with -Werror, but the rest of configure doesn't like -Werror OLD_CFLAGS=$CFLAGS CFLAGS="$CFLAGS -W -Wall -Werror" if test "z$USE_MAINTAINER_MODE" = zyes ; then CFLAGS="$CFLAGS -ansi" fi dnl Check for post-C89 keywords AC_C_INLINE dnl Now figure out how to printf() a time_t AC_MSG_CHECKING(for time_t format) AC_CACHE_VAL(ac_cv_fmt_time_t, [ ac_cv_fmt_time_t=no AC_COMPILE_IFELSE([#include #include void myfunc(void) { time_t test=0; printf("%li", test); }], ac_cv_fmt_time_t="\"%li\"") if test $ac_cv_fmt_time_t = no; then AC_COMPILE_IFELSE([#include #include void myfunc(void) { time_t test=0; printf("%i", test); }], ac_cv_fmt_time_t="\"%i\"") fi if test $ac_cv_fmt_time_t = no; then AC_MSG_ERROR([Cannot detect format string for time_t Please check sys/types.h for the typedef of time_t and submit to a developer]) fi ]) AC_DEFINE_UNQUOTED(FMT_TIME_T, $ac_cv_fmt_time_t, [Define to printf format for a time_t variable]) AC_MSG_RESULT($ac_cv_fmt_time_t) dnl How to copy one va_list to another? AC_CACHE_CHECK([for va_copy], ac_cv_c_va_copy, [AC_LINK_IFELSE( [AC_LANG_PROGRAM([#include ], [va_list ap1, ap2; va_copy(ap1, ap2);])], [ac_cv_c_va_copy="yes"], [ac_cv_c_va_copy="no"] )]) if test "$ac_cv_c_va_copy" = "yes" ; then AC_DEFINE(HAVE_VA_COPY, 1, [Define if we have va_copy]) fi AC_CACHE_CHECK([for __va_copy], ac_cv_c___va_copy, [AC_LINK_IFELSE( [AC_LANG_PROGRAM([#include ], [va_list ap1, ap2; __va_copy(ap1, ap2);])], [ac_cv_c___va_copy="yes"], [ac_cv_c___va_copy="no"] )]) if test "$ac_cv_c___va_copy" = "yes" ; then AC_DEFINE(HAVE___VA_COPY, 1, [Define if we have __va_copy]) fi dnl Now fix things back up CFLAGS=$OLD_CFLAGS dnl Optional features. AC_MSG_CHECKING(which malloc to use) AC_ARG_WITH(malloc, [ --with-malloc=type Enables use of a special malloc library; one of: system (the default), boehm-gc, dmalloc, mpatrol, x3, slab], [], [withval="system"]) if test "x$withval" = "xsystem" ; then AC_MSG_RESULT(system) AC_DEFINE(WITH_MALLOC_SYSTEM, 1, [Define if using the system's malloc]) x3_malloc="System" elif test "x$withval" = "xdmalloc" ; then AC_MSG_RESULT(dmalloc) AC_CHECK_HEADERS(dmalloc.h,,AC_MSG_ERROR([dmalloc header file missing. dmalloc build will fail.])) AC_CHECK_LIB(dmalloc,malloc,,AC_MSG_ERROR([dmalloc library is missing. dmalloc build will fail.])) AC_DEFINE(WITH_MALLOC_DMALLOC, 1, [Define if using the dmalloc debugging malloc package]) x3_malloc="DMalloc" elif test "x$withval" = "xmpatrol" ; then AC_MSG_RESULT(mpatrol) AC_CHECK_HEADERS(mpatrol.h,,AC_MSG_ERROR([mpatrol header file missing. mpatrol build will fail.])) dnl Using mpatrol requires linking against libelf, at least on Linux. AC_CHECK_LIB(elf, elf_begin) AC_CHECK_LIB(mpatrol,__mp_atexit,,AC_MSG_ERROR([mpatrol library is missing completely. mpatrol build will fail.])) AC_DEFINE(WITH_MALLOC_MPATROL, 1, [Define if using the mpatrol malloc debugging package]) x3_malloc="MPatrol" elif test "x$withval" = "xboehm-gc" ; then AC_MSG_RESULT(boehm-gc) AC_CHECK_HEADERS(gc/gc.h,,AC_MSG_ERROR([Boehm GC header file missing. boehm-gc build will fail.])) AC_CHECK_LIB(dl, dlopen, , AC_MSG_ERROR([libdl library is missing. boehm-gc build will fail.])) AC_CHECK_LIB(gc, GC_gcollect, , AC_MSG_ERROR([Boehm GC library is missing. boehm-gc build will fail.])) AC_DEFINE(WITH_MALLOC_BOEHM_GC, 1, [Define if using the Boehm GC to garbage collect and check memory leaks]) x3_malloc="Boehm" elif test "x$withval" = "xx3" ; then AC_MSG_RESULT(x3) AC_DEFINE(WITH_MALLOC_X3, 1, [Define if using the X3 internal debug allocator]) MODULE_OBJS="$MODULE_OBJS alloc-x3.\$(OBJEXT)" x3_malloc="X3" elif test "x$withval" = "xslab" ; then AC_MSG_RESULT(slab) AC_DEFINE(WITH_MALLOC_SLAB, 1, [Define if using the slab internal debug allocator]) MODULE_OBJS="$MODULE_OBJS alloc-slab.\$(OBJEXT)" x3_malloc="Slab" else AC_MSG_ERROR([Unknown malloc type $withval]) fi AC_MSG_CHECKING(which protocol to use) AC_ARG_WITH(protocol, [ --with-protocol=name Choose IRC dialect to support; one of: p10 (the default)], [], [withval="p10"]) if test "x$withval" = "xp10" ; then AC_MSG_RESULT(P10) AC_DEFINE(WITH_PROTOCOL_P10, 1, [Define if using the P10 dialect of IRC]) MODULE_OBJS="$MODULE_OBJS proto-p10.\$(OBJEXT)" PROTO_FILES=proto-p10.c x3_ircd="P10" else AC_MSG_ERROR([Unknown IRC dialect $withval]) fi AC_MSG_CHECKING(how to send mail) AC_ARG_WITH(mail, [ --with-mail=name How to send mail; one of: sendmail (the default), smtp], [], [withval="sendmail"]) if test -r "${srcdir}/src/mail-${withval}.c" ; then AC_MSG_RESULT([$withval]) MODULE_OBJS="$MODULE_OBJS mail-${withval}.\$(OBJEXT)" else AC_MSG_ERROR([Unknown mail method $withval]) fi AC_MSG_CHECKING([I/O multiplexing backends]) IOMUXES="" if test "x$ac_cv_func_select" = xyes ; then AC_DEFINE(WITH_IOSET_SELECT, 1, [Define if using the select() I/O backend]) MODULE_OBJS="$MODULE_OBJS ioset-select.\$(OBJEXT)" IOMUXES="$IOMUXES select" fi AC_ARG_WITH([epoll], [ --without-epoll Disables the epoll_*() I/O backend], [], [withval="$ac_cv_func_epoll_create"]) if test "x$withval" = xyes ; then AC_DEFINE(WITH_IOSET_EPOLL, 1, [Define if using the epoll I/O backend]) MODULE_OBJS="$MODULE_OBJS ioset-epoll.\$(OBJEXT)" IOMUXES="$IOMUXES epoll" fi AC_ARG_WITH([kevent], [ --without-kevent Disables the kevent() I/O backend], [], [withval="$ac_cv_func_kevent"]) if test "x$withval" = xyes ; then AC_DEFINE(WITH_IOSET_KEVENT, 1, [Define if using the kevent I/O backend]) MODULE_OBJS="$MODULE_OBJS ioset-kevent.\$(OBJEXT)" IOMUXES="$IOMUXES kevent" fi IOMUXES=`echo $IOMUXES | sed 's/^ +//'` AC_MSG_RESULT($IOMUXES) if test "x$IOMUXES" = "x" ; then AC_MSG_ERROR([No supported I/O multiplexing backend found]) else AC_MSG_RESULT($IOMUXES) fi AC_ARG_WITH(getopt, [ --without-getopt Disables building of the GNU getopt library], [if test "$withval" = no; then AC_DEFINE(IGNORE_GETOPT, 1, [Define to disable built-in getopt library]) fi]) AC_MSG_CHECKING(whether to enable tokenization) AC_ARG_ENABLE(tokens, [ --disable-tokens Disables tokenization of P10 protocol output (tokens required if linking to ircu 2.10.11)], [],[enableval=yes]) if test "z$enableval" = zno ; then AC_MSG_RESULT(no) else AC_DEFINE(ENABLE_TOKENS, 1, [Define if tokenized P10 desired]) AC_MSG_RESULT(yes) fi AC_MSG_CHECKING(whether to enable debug behaviors) AC_ARG_ENABLE(debug, [ --enable-debug Enables debugging behaviors], [ CPPFLAGS="$CPPFLAGS" AC_MSG_RESULT(yes) x3_debug="Enabled" ], [ CPPFLAGS="$CPPFLAGS -DNDEBUG" AC_MSG_RESULT(no) x3_debug="Disabled" ]) if test -e src ; then if test ! -d src ; then AC_MSG_ERROR([src exists but is not a directory; please move it out of the way.]) fi else mkdir src fi AC_MSG_CHECKING(for extra module files) MODULE_DEFINES="src/modules-list.h" echo > $MODULE_DEFINES touch $MODULE_DEFINES AC_ARG_ENABLE(modules, [ --enable-modules=list,of,modules Enable extra modules], [ OIFS="$IFS" IFS=',' EXTRA_MODULE_OBJS="" module_list="" dnl Must use a separate file because autoconf can't stand newlines in an AC_SUBSTed variable. for module in $enableval ; do module=`echo $module | sed -e s/^mod-// -e s/\.c\$//` EXTRA_MODULE_OBJS="$EXTRA_MODULE_OBJS mod-$module.\$(OBJEXT)" module_list="$module_list $module" echo "WITH_MODULE($module)" >> $MODULE_DEFINES if test "x$module" = "xtrack" ; then TRACK="-D HAVE_TRACK" AC_DEFINE(HAVE_TRACK, 1, [Define this if you are using mod-track]) fi if test "x$module" = "xhelpserv" ; then TRACK="-D HAVE_HELPSERV" AC_DEFINE(HAVE_HELPSERV, 1, [Define this if you are using mod-helpserv]) fi done IFS="$OIFS" MODULE_OBJS="$MODULE_OBJS $EXTRA_MODULE_OBJS" AC_MSG_RESULT($module_list) ], [ AC_MSG_RESULT(none) ]) AC_ARG_ENABLE(python, [ --disable-python don't build the python plugin], python=$enableval, python=yes) MY_SUBDIRS="" RX_INCLUDES="" RX_LIBS="" if test "${BROKEN_REGEX}" = yes -o "${ac_cv_func_regcomp}" = no; then MY_SUBDIRS="rx $MY_SUBDIRS" RX_INCLUDES="-I../rx" RX_LIBS="../rx/librx.a" fi MY_SUBDIRS="$MY_SUBDIRS src" CFLAGS="$CFLAGS $ANSI_SRC -W -Wall" if test "z$USE_MAINTAINER_MODE" = zyes ; then CFLAGS="$CFLAGS -Werror" fi dnl I am not comfortable running make install from ./configure. This has to be done correctly or not at all. -Rubin dnl REMEMBER TO CHANGE WITH A NEW TRE RELEASE! dnl AC_MSG_RESULT(extracting TRE regex library) dnl cur_dir=`pwd` dnl cd tools dnl remove old tre directory to force a recompile... dnl rm -rf tre-$tre_version dnl if test "x$ac_cv_path_GUNZIP" = "x" ; then dnl tar xfz tre.tar.gz dnl else dnl cp tre.tar.gz tre.tar.gz.bak dnl gunzip -f tre.tar.gz dnl cp tre.tar.gz.bak tre.tar.gz dnl tar xf tre.tar dnl fi dnl AC_MSG_RESULT(configuring TRE regex library) dnl cd tre-$tre_version dnl tre_prefix=$prefix dnl if test $tre_prefix = "NONE"; then dnl tre_prefix="$HOME" dnl fi dnl ./configure --disable-agrep --disable-shared --disable-system-abi --disable-wchar --disable-multibyte --prefix=$tre_prefix || exit 1 dnl dnl AC_MSG_RESULT(compiling TRE regex library) dnl $ac_cv_prog_MAKER || exit 1 dnl AC_MSG_RESULT(installing TRE regex library) dnl $ac_cv_prog_MAKER install || exit 1 dnl TREINCDIR="$tre_prefix/include" dnl AC_SUBST(TREINCDIR) dnl if test "x$ac_cv_path_PKGCONFIG" = "x" ; then dnl TRELIBS="-L$tre_prefix/lib -ltre" dnl else dnl TRELIBS=`$ac_cv_path_PKGCONFIG --libs tre.pc` dnl fi dnl AC_SUBST(TRELIBS) dnl dnl cd $cur_dir dnl libTRE (regex library) checking tre_version="0.7.5" withval='' AC_ARG_WITH(tre, [ --with-tre=PATH Base path to where libtre is installed, such that PATH/lib/libtre.so and PATH/include/tre/regex.h exist.], ) if test "x$withval" != "x"; then AC_MSG_RESULT(Using include dir $withval to find libtre) CPPFLAGS="$CPPFLAGS -I$withval/include -L$withval/lib" LIBS="$LIBS -L$withval/lib" else AC_MSG_RESULT([Looking for tre in system and home dirs (${HOME})...]) CPPFLAGS="$CPPFLAGS -I${HOME}/include -L${HOME}/lib" LIBS="$LIBS -L${HOME}/lib" fi AC_CHECK_HEADER(tre/regex.h, , [AC_MSG_ERROR([tre/regex.h, the TRE regex headers, were not found. Install tre or use --with-tre=PATH to tell me how to find it, where PATH/include/tre/regex.h exists. For convenience, just type 'tools/tre_install.sh' now, to install tre in your home directory.])],) AC_CHECK_LIB(tre, regexec, , [AC_MSG_ERROR([TRE regex library not found. Install tre, or use --with-tre=PATH to tell me how to find it, where PATH/lib/libtre.so exists. For convenience, just type 'tools/tre_install.sh' now, to install tre in your home directory.])]) dnl core dumper checking core_version="1.1" withval='' AC_ARG_WITH(coredumper, [ --with-coredumper=PATH Base path to where core dumper is installed, such that PATH/lib/libcoredumper.so and PATH/include/google/coredumper.h exist.], ) if test "x$withval" != "x"; then AC_MSG_RESULT(Using include dir $withval to find coredumper) CPPFLAGS="$CPPFLAGS -I$withval/include -L$withval/lib" LIBS="$LIBS -L$withval/lib" else AC_MSG_RESULT([Looking for coredumper in system and home dirs (${HOME})...]) CPPFLAGS="$CPPFLAGS -I${HOME}/include -L${HOME}/lib" LIBS="$LIBS -Wl,--rpath -Wl,${HOME}/lib" fi AC_CHECK_HEADER(google/coredumper.h, , [AC_MSG_RESULT([google/coredumper.h, the coredumper headers, were not found. Install coredumper or use --with-coredumper=PATH to tell me how to find it, where PATH/include/google/coredumper.h exists. For convenience, just type 'tools/core_install.sh' now, to install coredumper in your home directory.])],) AC_CHECK_LIB(coredumper, WriteCoreDump, , [AC_MSG_RESULT([Coredumper library not found. Install coredumper, or use --with-coredumper=PATH to tell me how to find it, where PATH/lib/libcoredumper.so exists. For convenience, just type 'tools/core_install.sh' now, to install coredumper in your home directory.])]) dnl openssl checking withval='' AC_ARG_WITH(ssl, [ --with-ssl=PATH Base path to where openssl is installed],) if test "x$withval" != "x"; then AC_MSG_RESULT(Using include dir $withval to find openssl) CPPFLAGS="$CPPFLAGS -I$withval/include -L$withval/lib" LIBS="$LIBS -L$withval/lib" else AC_MSG_RESULT([Looking for openssl in system ]) fi AC_CHECK_LIB(ssl, BIO_new, [ LIBS="-lssl $LIBS" AC_CHECK_HEADERS(openssl/bio.h, [ AC_DEFINE(WITH_SSL, 1, [Define if SSL libs are linked]) ssl_message="LDAP library: enabled" ], [ if test "x$withval" != "x"; then AC_MSG_ERROR([ssl headers not found]) fi ]) ], [ if test "x$withval" != "x"; then AC_MSG_ERROR([libldap not found or not valid]) fi ] ) AC_MSG_RESULT($LIBS) dnl ldap checking withval='' AC_ARG_WITH(ldap, [ --with-ldap=PATH Base path to where the ldap library and headers are installed, such that PATH/include/ldap.h and PATH/lib/libldap.so exist.],) if test "x$withval" != "x"; then AC_MSG_RESULT(Using include dir $withval to find libldap) CPPFLAGS="$CPPFLAGS -I$withval/include -L$withval/lib" LIBS="$LIBS -L$withval/lib" else AC_MSG_RESULT([Looking for ldap in system ]) fi AC_CHECK_LIB(ldap, ldap_simple_bind_s, [ LIBS="-lldap $LIBS" AC_CHECK_HEADERS(ldap.h, [ AC_DEFINE(WITH_LDAP, 1, [Define if LDAP libs are linked]) ldap_message="LDAP library: enabled" ], [ if test "x$withval" != "x"; then AC_MSG_ERROR([ldap.h not found]) fi ]) ], [ if test "x$withval" != "x"; then AC_MSG_ERROR([libldap not found or not valid]) fi ] ) dnl ********************************************************************* dnl ** PYTHON *********************************************************** dnl ********************************************************************* if test "$python" = yes; then AC_PATH_PROG(pythonpath, python2) if test "_$pythonpath" = _ ; then AC_PATH_PROG(pythonpath, python) fi if test "_$pythonpath" = _ ; then python=no else AC_MSG_CHECKING(Python version) changequote(<<, >>)dnl PY_VER=`$pythonpath -c 'import distutils.sysconfig; print distutils.sysconfig.get_config_vars("VERSION")[0];'` PY_LIB=`$pythonpath -c 'import distutils.sysconfig; print distutils.sysconfig.get_python_lib(standard_lib=1);'` PY_INC=`$pythonpath -c 'import distutils.sysconfig; print distutils.sysconfig.get_config_vars("INCLUDEPY")[0];'` $pythonpath -c "import sys; map(int,sys.version[:3].split('.')) >= [2,2] or sys.exit(1)" changequote([, ])dnl AC_MSG_RESULT($PY_VER) if test "$?" != "1"; then AC_MSG_CHECKING(Python compile flags) PY_PREFIX=`$pythonpath -c 'import sys; print sys.prefix'` PY_EXEC_PREFIX=`$pythonpath -c 'import sys; print sys.exec_prefix'` if test -f $PY_INC/Python.h; then AC_DEFINE(WITH_PYTHON, 1, [Define if using python]) PY_LIBS="-L$PY_LIB/config -lpython$PY_VER -lpthread -lutil" PY_CFLAGS="-I$PY_INC" AC_MSG_RESULT(ok) CFLAGS="$CFLAGS $PY_CFLAGS" LIBS="$LIBS $PY_LIBS" else python=no AC_MSG_RESULT([Can't find Python.h]) fi else echo "Python too old. Only 2.2 or above is supported." python=no fi fi fi AM_CONDITIONAL(DO_PYTHON, test "x$python" = "xyes") AC_MSG_RESULT($LIBS) AC_DEFINE_UNQUOTED(CODENAME, "${CODENAME}", [Code name for this release]) AC_SUBST(MODULE_OBJS) AC_SUBST(MY_SUBDIRS) AC_SUBST(RX_INCLUDES) AC_SUBST(RX_LIBS) AC_SUBST(TRACK) AC_SUBST(PY_CFLAGS) AC_SUBST(PY_LIBS) AC_CONFIG_FILES(Makefile rx/Makefile src/Makefile) AC_OUTPUT dnl Print configuration summary cat <